Za 3000 nakup rabljenega (86.358)

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm Lodpfxed Supge Adkjri - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Lrodehy Tlropfx Adksi Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next Ledpol D Rp Ejfx Adksri With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Lrodpfx Aowiwnqsdkoi Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Lredpslc Ewiofx Adksi Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Lsdpfx Aog Nn E Nsdkori Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg Lodet Dx U Sspfx Adksri 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: dober (rabljeno), Leto izdelave: 1989, Pressing area: 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5,500 kg Hydraulic Heated Platen Press Bottom-ram design Electric heating plates Pressing pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all operating controls Digital temperature display for both heating plates Press cycle counter Safety rip cord Rack compensator Main switch Lrodpfswd N Rmjx Adkoi Note for used machinery: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices – free loading included! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will be answered only if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Lsdpfoxgpaqjx Adkjri Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Ledpfjuxqzusx Adksri Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Lsdpfx Adett Da Dsksri Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, With the RFM 320 S SET model, we offer you a grinding machine that allows you to produce bevels up to 16 mm wide quickly and with optimal grinding quality in a single pass. Short setup times ensure efficient processing, even for individual workpieces. The RFM 320 S SET is equipped with a grinding belt oscillation system featuring pneumatic belt cleaning and a pre-milling unit. Lrsdef E Nqdjpfx Adkei Standard equipment RFM 320 S SET: › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) › Bevel grinding device for bevels up to 16 mm width › Grinding belt oscillation with pneumatic belt cleaning › Integrated base for feed unit › 16A socket for feed › Suction connection Ø 80 mm Pre-milling unit Undercarriage Extendable table extension Setup dimensions (L x W x H in mm): 1,300 x 690 x 1,010 Weight: 145 kg

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Ledpov Hm Nmjfx Adksri Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, General: Cutting width adjustment via handwheel at the front of the machine Digital display for cutting width Lsdpjmmb Acjfx Adksri Saw blade height and tilt adjustment via foot pedal Digital display for saw blade height and angle Scoring unit adjustable by electric motor Crosscut table length stop with digital display Parallel fence foldable CE compliant Saw blade tilting up to 45.5 degrees Maximum cutting height 145 mm Maximum saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/4000/5500 rpm Motor power 5.5 kW Extraction port diameter 120 mm Cutting length 3300 mm Including operating manual Including tools Dimensions (L x W x H): 3300 x 3800 x 1400 mm Weight approx. 1365 kg Note on used machines: • Technical data is subject to error and prior sale. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!) General: Cutting width adjustment via handwheel at the front of the machine Digital display for cutting width Saw blade height and tilt adjustment via foot pedal Scoring unit adjustable by electric motor Crosscut table length stop with digital display Parallel fence foldable CE compliant

Stanje: novo, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at special price with full manufacturer's warranty. Pro Drive Control: 3.5" colour display with separate keyboard Automatic adjustment of parallel and mitre fences when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last measurement entry (back function) 99 storable cutting programs Grooving: with automatic stepwise positioning of the parallel fence 400V / 50Hz - Europe, scale: mm scale Electromotive height and tilt adjustment 0 – 46° for the main saw blade with automatic cut height correction when tilting the saw unit Machine height 910 mm (standard equipment) The F 45 control panel is mounted at eye level, allowing convenient operation of all axes and easy overview of all settings. Single-handed operation of the swing-away device is easily accessible from the operator's position in front of the machine. Another advantage: nothing obstructs your way at the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Increased cutting height with saw blade projection up to 204 mm max. M51101 Single-side tilting saw unit with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and lateral adjustment M24037 LED lighting for the scoring unit hazard zone M41010 Table extension, 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Mitre-angle fence, crosscutting up to 3500 m M44443 CNC-controlled parallel fence, cutting width 1300 mm M44450 Front support roller M37003 On/off switch on the double roller carriage Note on used machines: • Errors in technical data and prior sale reserved. Lrodpfx Adeiz Aufekji • Stated prices are ex location - free loading! • Machines have been cleaned and function-tested. • All machines are purchased as inspected, without any warranty claim. Buyers are free to inspect the machines at the site. • Special agreements only possible in written form. (We only answer inquiries with your address + telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Lredpfshvan Isx Adksi Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Lredjfh Tmmepfx Adkei Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 690 mm, izvrtina vretena: 155 mm, premer struženja: 1.090 mm, višina središča: 500 mm, širina na sredini: 700 mm, stružna dolžina: 3.000 mm, Vzporedni stružnica ZMM-SIBIMEX CU 1000/3000 Leto izdelave: 2007 CE certifikat Odlično splošno stanje Višina konic: 500 mm Uporabna dolžina struženja: 3000 mm Stružni premer nad posteljo: 1090 mm Stružni premer nad vozičkom: 690 mm Stružni premer brez izreza: 1250 mm Prehod palice: 155 mm Širina postelje: 700 mm Moč motorja: 22 kW Teža cca: 8000 kg Število hitrosti: 24 Obrati vretena: 6,3 - 1250 rpm Območje hitrosti Stroj kompleten s fiksno in premično luneto Samocentrirna glava Štirivpenjalna plošča Motorizirana konica Ljdpfx Aoylazwsdkori Elbo prikazovalnik osi Hitri pomiki za napredovanje

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, nosilnost: 2.800 kg, gradbena širina: 2.000 mm, Prikolica za težke tovore Lrjdpfx Asyvwygodkei Stanje: Pripravljena za uporabo in popolnoma funkcionalna Tehnično stanje: dobro Opis: Prikolica TANDEM - 2-osna prikolica HUMER SO WL 3519 - nosilnost 2800 kg - letnik 2013 - pocinkana izvedba - z dvižno rampo (mehansko) - dolžina nakladalne površine 3,50 m - širina nakladalne površine 2 m - višina stranic 40 cm - dovoljena skupna masa 3,5 tone - svetlobni sistem - dobro stanje

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 1,4 kW (1,90 KM), skupna masa: 880 kg, skupna dolžina: 2.600 mm, skupna širina: 1.250 mm, skupna višina: 1.760 mm, vhodna napetost: 400 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nujno zaustavitev, Fleksibilna sita omogućuje učinkovito razdvajanje, klasifikaciju i sortiranje rasutih materijala u industrijama kao što su rudarstvo, reciklaža, građevinarstvo i agregati. Kupci imaju koristi od preciznog sortiranja, neprekidnog rada i konstrukcije koja zahtijeva malo održavanja, čime se smanjuju zastoje i troškovi rada. Glavne značajke: Lsdpfxoxdwdxj Adkjri • Robustan, stabilizirani okvir za kontrolirane vibracije i precizan protok materijala • Modularni dizajn s izmjenjivim ulošcima sita za fleksibilnu konfiguraciju • Izdržljiva konstrukcija koja zahtijeva malo održavanja i omogućuje jednostavan pristup dijelovima podložnim habanju • Pouzdan pogonski sustav za konstantne performanse i ujednačenu kvalitetu proizvoda Tehničke karakteristike: Duljina 2,6 m · Širina 1,25 m · Visina 1,76 m · Maks. kapacitet 10 m³/h · Maks. širina kašike 0,8 m · Snaga 2 × 0,7 kW · Površina sita 0,9 m² · Težina 880 kg · Napon 400 V

Stanje: rabljeno, OTT Tornado - TOP Upravljanje - preko 15-palčnega barvnega zaslona na dotik za popolno avtomatizacijo in najvišje udobje upravljanja CM-CombiMelt-lepilni sistem, primeren za uporabo EVA in PUR talilnih lepil ter vseh običajnih čistilnih granul Enota za lepljenje za spajanje ivernih plošč Avtomatski valjčni magazin Avtomatski magazin za robove Dvojna kapalna enota s samodejnim nagibom 0° / 3° Rezkalna enota za ravnanje robov - rezkanje na ravno - 12 mm Fino rezkanje RADIUS - rezkanje radija - profilni nož R2 - R5 Avtomatizirano kopirno rezkanje - zaokroževanje vogalov Vlečna rezkalna enota - radij - faza Ravna vlečna rezkalna enota Enota za pršenje sredstva za drsnost - PU Komplet za čiščenje z enoto za fino poliranje Zelo stabilna delovna podlaga z valjčnimi tirnicami - SPREDAJ s škarjastim izvlekom Popolna oprema orodij vključena Stroj je KOT NOV v IZJEMNO DOBREM STANJU Stroj iz upokojitve Prvi zagon leta 2009, zelo malo delovnih ur Možnost leasinga Ljdpfxsyuvbls Adkori Iz zaloge Lieboch

Stanje: rabljeno, lastna masa: 5.890 kg, največja dovoljena obremenitev: 27.110 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5, Oprema: ABS, | Krone SD Kontejnersko podvozje drsno, Multi | Primerno za ADR | 1x20ft 2x20ft 1x30ft 1x40ft 1x45ft | BPW osovina z diskom zavore | Dvignljiva os | Pnevmatske gume: 385/55R22,5 | Avstrijsko vozilo | TÜV veljaven do | Pridržujemo si pravico do napak, tipkarskih napak in predhodne prodaje. Lrjdpfxoywk Tcs Adkji

Stanje: rabljeno, Leto izdelave: 2001, TEHNOLOŠKA LINIJA ZA IZDELAVO STREŠNIH ELEMENTOV 1. Profilirni stroj 2. Sistem za izdelavo izolacijskih elementov 3. Sistem za pripravo AL folije 4. Sistem za lepljenje 5. Pomožni elementi, tehnična dokumentacija, certifikati Ljdpeyv E Aisfx Adkori Tipi strešnih plošč, ki se proizvajajo na tehnološki liniji: - strešne plošče modulnih mer 1100mm x 1070mm - strešne plošče polovičnega modula 550 x 1070 mm - strešne plošče brez protikondenznega sloja različnih dolžin (do 6 m)

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Cobra je ekskluzivna visokotlačna dvostruka membranska pumpa prikladna za Airless i AirCoat primjene do 250 bara. Cobra je prva visokotlačna pneumatska pumpa bez brtvi. Zbog nepostojanja kontakta između materijala i vanjske atmosfere (pumpa je potpuno zatvorena), nedostatka trenja u sekciji za fluid i minimalnog smicanja, savršena je za sve vrste materijala, uključujući i najzahtjevnije kao što su reaktivne boje (UV boje, izocijanati, akrilati) ili visoko abrazivne materijale. Pumpa radi s izuzetno niskim pulsiranjem i stvara ravnomjeran tok boje, omogućujući savršen uzorak prskanja i vrhunsku kvalitetu površine. Zahvaljujući minimaliziranim unutarnjim volumenima, pumpa je dizajnirana da značajno smanji potrošnju otapala i otpad materijala tijekom ispiranja i operacija promjene boje. Cobra 40-10 je idealno rješenje za rad s manjim količinama i učestalim promjenama boja – preporučuje se za primjene sa jednim do tri pištolja u drvnoj i namještajskoj industriji, malim stolarskim radionicama te u općoj metalnoj industriji. Cobra® 40-10 je također idealna za doziranje baze ili učvršćivača za 2K miješalice (FlexControl i FlexControl Plus). Lrodpfx Adoqzx Nkjkei Wagner membranska pumpa OMJER TLAKA 40:1 MAKS. TLAK MATERIJALA NA ULAZU U PUMPU 20 bara PRIKLJUČAK ZA DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ RADNA TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ MAKS. RADNI TLAK 250 bara MAKS. BROJ UDARACA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm³/DS TEMPERATURA OKOLIŠA 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA BUKE 74 dB(A) PODRŽANI PH MATERIJALA 3,5 - 9,0 pH PUMPA SE ISPORUČUJE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Stanje: zelo dobro (rabljeno), Uporaba: sušenje, dimljenje, kuhanje, dušenje, pečenje Poskusno delovanje je možno Ljdpfxjywglho Adkori