Žaga za furniranje

Höfer FS 350

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable Nwodpfx Aju Uh T Dodpjp 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL SPECIFICATIONS: cutting width: 350 mm cutting height: 160 mm main motors: 37 and 45 kW feed motor: 3 kW adjustable lower shaft width max. blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm feed chain width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min centralized lubrication minimum workpiece length: 600 mm electric height adjustment electrical shaft height adjustment six upper pressure rollers mechanical roller hold-downs Nodpfx Adsqy E Rlopswp four anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.000 mm, skupna širina: 1.250 mm, skupna višina: 2.000 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, moč: 40 kW (54,38 KM), premer žaginega lista: 450 mm, širina obdelovanca (maks.): 300 mm, višina obdelovanca (maks.): 30 mm, zračni tlak: 6 letvica, premer povezave za izpihovanje: 200 mm, premer honanja: 125 mm, število vreten: 2, MARINUS PROMAX – Endenbearbeitungs- und Defektsägemaschine Die Maschine entspricht den folgenden Spezifikationen: • Robuste und schwere Bauweise, Abmessungen LxBxH = 2080x1260x2000 mm. • Durchlaufzuführung mit präziser Positionierung (Servo-Antrieb). • Pneumatische Seitenanschläge für garantiert rechtwinklige Bearbeitung. • SPS-Steuerung. • Bedienung über Terminal. • Modem für Fernprogrammierung. • 2 Servomotoren für maximale Dynamik. • 2 Sägemotoren (3,0 kW). • 2 Hochgeschwindigkeits-Fräsmotoren mit Frequenzumrichter (je 7,5 kW / 200 Hz / n=12.000). • 1 Getriebemotor mit Frequenzumrichter. • 2 Trommelmotoren. • 26 pneumatische Zylinder mit Ventilen. • 1 Lumineszenzsensor • 6 Induktivsensoren • Bandförderer für Abfall, Höhe 1,3 m. • Maschine komplett durch Sicherheitstüren gekapselt. • Maschine gemäß CE-Vorschriften. Längenmesssystem: Ein Längenmesssystem zeigt während der Produktion die Gesamtlänge und die Quadratmeter der Bretter am Display an. Werkzeugausstattung: Optional können wir Werkzeuge (Nut und Feder) mit Wendemessern sowie zwei Kappsägeblätter für die Maschine anbieten. Standardprogrammierung: Die Maschine verfügt über zwei Hauptprogramme: 1. Endenbearbeitung 2. Zuschnitt Nedpoq Auhdjfx Adpjwp Beide Hauptprogramme beinhalten zwei Unterprogramme: 1. Variable Längen: Defekte werden ausgeschnitten, Endprodukte haben variable Längen. 2. Feste Längen: Bretter werden in einer festen Länge produziert, die Einfuhrlänge darf maximal +200 mm Übermaß betragen. Defekte können hierbei nicht ausgeschnitten werden. • Min. Breite: 60 mm • Max. Breite: 300 mm • Min. Länge: 500 mm • Max. Länge: 6000 mm • Min. Stärke: 10 mm • Max. Stärke: 30 mm

Stanje: novo, Leto izdelave: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Njdpfx Aji Hpk Usdpswp Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: zelo dobro (rabljeno), SCM S520 Thickness Planer Working width: 520 mm Working height: 250 mm Feed speed adjustable: 4 steps Cutterblock with traditional knives 4-knife cutterblock Power: 4 kW Weight: 670 kg Nwodpjitkx Eofx Adpop

Leto izdelave: 1998, Stanje: dober (rabljeno), I am selling a dowel drilling machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programming CNC-controlled Z-axis Nwodod Exwgjpfx Adpep Working width: 1200 mm Maximum working height: 36 mm Available for immediate sale

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Nwedpfscqvhwex Adpop Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), Window manufacturing machines WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Profiling and finish-milling machine UNIVAR 10, year 1997 Nedpfx Adoiix Uvepjwp

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), Manufacturer: VANGROENWEGHE Model/Type: M-300 Year of manufacture: 1999 Category: Through-feed grinder Location: Gorzów Wielkopolski Delivery terms: Collection by buyer Delivery costs: Covered by buyer Commissioning: To be agreed Notes: Machine: VG TYPE F-300-COMBI/CE Year of manufacture: 1998 Category: Through-feed grinder Location: Gorzów Wielkopolski Delivery terms: Collection by buyer Delivery costs: Covered by buyer Commissioning: To be agreed Through-feed sander VG TYPE F-300-COMBI-CE / 1998 - Machine from the Combi series - Contact roller and pad sanding Nwodpfxsd Nmdks Adpjp - Pneumatic oscillation and mechanical belt tensioning - Motors: 7.5 + 1 HP / 380 V - Sanding belts: 300 x 1900 mm

Stanje: rabljeno, številka stroja/vozila: 4/14242, Frank floor sanding machine FSR, used Motor power: 0.75 kW Voltage: 230 Volt 5 Amps, 50 Hz Machine no.: 4/14242 Dust bag Nwodpfxob Auu Re Adpop Location: Ex stock Bitburg