Weinig Conturex nakup rabljenega (470)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
WEINIG
mali oglas
Grońsko
704 km
Skobeljnik
WEINIGUnimat 23 E
Klic
Stanje: zelo dobro (rabljeno), Štiristranski skobeljni stroj WEINIG Unimat 23 E
maks. širina skobljanja 230 mm,
višina skobljanja 130 mm,
5 vreten,
Ročno nastavljanje dimenzij skobljanja,
vretena: spodnja 7,5 kW; leva in desna 11 kW; zgornja 11 kW; spodnja 7,5 kW,
motorji z zavorami,
Tjdpfx Abexvc Uaegef
vretena premer 40 mm,
vretena popolnoma nastavljiva,
stroj ima 4 vlekalne valje v delovni mizi, primeren za mokri les,
podajanje z gredami kardana z brezstopenjsko regulacijo,
stroj se prodaja skupaj z glavami, vidnimi na vretenih,
kardani niso izrabljeni, mize niso obrabljene, stroj deluje gladko, brez tresenja ali vibracij,
skobeljni stroj je masiven v originalu, teža približno 5 t. Zelo dobro stanje, vse deluje.
mali oglas
Drachten
1.005 km
Samodejna žaga za podiranje
Weinig RaimannFlexiRip „Jrionline“ 6200
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Automatic longitudinal circular saw Raimann FlexiRip "Jrionline"
Tsdpsu Sg Anofx Abgof
Cutting length: 6,200 mm
Maximum cutting height, depending on saw blade diameter, from 85 to 210 mm.
Used only as a demo unit, virtually as new, only 34 operating hours.
mali oglas
Nemčija
650 km
Avtomatski stroj za vrezovanje
WEINIGUnivar 6 P
Klic
Stanje: rabljeno, Number of spindles: 3 pcs.
Number of tool sets: 1.3/4.1 pcs.
Spindle diameter: 50, 40 mm
Spindle length: 120, 320, 125 mm
Weight: 2500 kg
Loading dimensions (L x W x H): 3800 x 1400 x 2000 mm
Table length: 3470 mm
Tsdpjxpi Elsfx Abgof
Weinig Univar 6 P
For sale on behalf of client
-----
Operating voltage: 380 volts, 50 Hz.
For re-milling windows, doors, and similar items with asymmetrical continuous profiles.
Aggregate arrangement:
1. Climb-cut spindle on the right, pneumatically clocked.
2. Profiling spindle on the right
3. Fitting spindle
The profiling spindle is suitable for holding several tools stacked above each other. Spindle movement is pneumatic.
To achieve tear-free re-milling, spindle 1 works in climb-cut mode. For the last 100 mm of each frame end, this spindle plunges with the corresponding tool into the wood to avoid tear-out at the frame corners.
Machine body, tables, fences:
The machine body is made of heavy, torsion-free, and vibration-damping elements. Fences on the right in the profiling area are made of Pertinax. In front of the profiling spindle there is a split fence with sliding rail for short parts. Additional stop rail for large-format frames.
Feed system:
Continuous, chainless feed equipped with rubber rollers. Blowing system for cleaning feed rollers and table.
Spindles, hood:
Spindles feature high concentricity and are dynamically balanced. Extraction hoods are designed for optimal chip flow. Easiest tool changes thanks to quickly opened hood covers.
Machine operation, adjustment aids:
Operation from the front side. Adjustment of the fences to the tool diameter via mechanical digital display.
Electrical system, motors, control:
Electrical equipment according to DIN VDE 0113 - Electrical equipment of industrial machines EN 60204 IEC 204-1.
Other electrical regulations are not considered.
Motors dynamically balanced.
Control of tool positions via selector switch from the control panel.
Tools:
Machine equipped with set-up tools, but without processing tools.
SPINDLE 1
Climb-cut spindle
Number of tools: 1
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Tool clamping length: 120 mm
Max. tool diameter (re-milling): 232 mm
Tool zero flight circle: 112-140 mm
Base position below table: 10 mm
Motor power: 4 kW (5.5 kW)
SPINDLE 2
Number of tools: 4
Spindle travel vertical: 3 x 80 mm = 4 tools
Optionally switchable to 2 x 95 mm = 3 tools
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Tool clamping length: 320 mm
Feed profiling unit: 8 m/min
Feed roller width: 50 mm/35 mm
Feed roller diameter: 95 mm
Fence height: 70 mm
Working width: min. 30 mm; max. 220 mm
Working height: min. 30 mm; max. 100 mm
Workpiece length without tenon: min. 245 mm
Max. tool diameter
With zero diameter 112 mm: 210 mm
With zero diameter 140 mm: 232 mm
Max. tool diameter (re-milling): 232 mm
Tool zero flight circle: 112-140 mm
Base position below table: 10/5 mm
Motor power: Spindle: 11 kW, Feed: 1.1 kW
Feed profiling unit: stepless 6-12 m/min
Feed roller width: 50 mm
Feed roller diameter: 95 mm
Fence height: 70 mm
Working width: min. 30 mm; max. 220 mm
Working height: min. 30 mm; max. 100 mm
Workpiece length without tenon: min. 245 mm
Special equipment:
3 mechanical spindle br...

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas
Rattelsdorf
527 km
Oblikovanje in rezkanje
Weinig120 m/min
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč pogonskega motorja podajalnika: 11.000 W, Weinig hydraulic feed
Feed speed: 120 m/min
Motor power: 11 kW
Tedpfx Absv Skbksgef
mali oglas
Sierakowska Huta
932 km
Oblikovalnik s spodnjim vretenom
WEINIG HRS
Klic
Stanje: zelo dobro (rabljeno), Kataloška številka 7784
Tedpfxext I Ads Abgsf
TEHNIČNI PODATKI
- Premer vretena: 30 mm
- Delovna višina vretena: 150 mm
- Menljivo vreteno
- Blokada vretena
- Nastavljivo gor/dol + kot
- Originalno litoželezno vodilo s popolno regulacijo
- 4 vrste hitrosti vrtenja + desno/levo 3000/5000/6000/10000 obr/min
- Dimenzije mize: 1120x800 mm
- Motor: 3,7 kW
- Dimenzije D/Š/V: 1100x1400x1160 mm
- Teža: 775 kg
PREDNOSTI
- Nemška izdelava
- Rabljeni rezkalni stroj
- Zelo dobro stanje
Neto cena: 6900 PLN
Neto cena: 1640 EUR
Neto cena izračunana po tečaju 4,2 PLN/EUR
(Pri večjih nihanjih tečaja se cena lahko spremeni)
mali oglas
Tomášovce
428 km
Oblikovalnik
WEINIGHYDROMAT 3000
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 5.300 mm, hitrost pomika os X: 60 m/min, delovna širina: 230 mm, premer vretena: 180 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 9.000 W, največja hitrost vretena: 6.000 obr/min, vrsta nastavitve višine: električni, število vreten: 6, moč: 127 kW (172,67 KM), vhodni tok: 241 A, premer napajalnega valja: 140 mm, Oprema: motorna zavora, Popolna in delujoča skobeljna linija Hydromat 3000 z delilnim rezilom. Idealna za avtomatizirano proizvodnjo fasadnih/ talnih oblog in strešnih letev.
Linija vključuje: avtomatsko podajanje z razkladalno nagibno mizo, posamezno podajanje desk v skobeljnico, postajo za minibundlanje, čelilnik ter avtomatsko zlaganje v pakete. Končni paket se avtomatsko spusti na vmesni transportni trak za PET-ovijanje.
Linija se prodaja zaradi nadgradnje kapacitet.
Več informacij o liniji na zahtevo.
Tjdpfx Aberk Nklogof
mali oglas
Nemčija
650 km
Stružnica za les
WEINIG / DIMTERUnimat 23 E
Klic
Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Splošni podatki
Teža stroja: 3200 kg
Stroj WEINIG Unimat 23 E je bil izdelan leta 1999 in je zasnovan za učinkovito skobljanje lesa. Idealna izbira za strokovnjake v lesnopredelovalni industriji, ki želijo povečati svoje proizvodne zmogljivosti. Za več informacij nas kontaktirajte.
Tjdpfx Aexn U Amobgjf
Področje uporabe
Skobljanje
mali oglas
Spatenhof
94 km
Oblikovanje in rezkanje
WeinigProfimat 26 super
Klic
Stanje: rabljeno, WEINIG Profimat 26 Super Planer and Profiling Moulder
Working width: 20 - 230 mm (up to 260 mm)
Working height: 8 - 120 mm (up to 140 mm)
5 working spindles, 40 mm spindle diameter
Long infeed table (approx. 2000 mm)
Main bottom spindle: 4 kW / Left & Right spindles: 7.5 kW each / Top spindle: 5.5 kW / Finishing bottom spindle: 5.5 kW
Pneumatic pressure feed rollers
Continuous cardan feed: 5 - 24 m/min, stepless adjustment
Feed roller before jointer
Push-button control panel
Automatic lubricant pump
Mechanical digital readouts
CE-certified machine
Year of manufacture: 2001
Supplied without tooling
Machine is WORKSHOP-OVERHAULED and in GOOD CONDITION
Todpfswqda Njx Abgef
Machine is connected and ready for demonstration at the exhibition center
Available from stock in Lieboch
mali oglas
Bad Honnef
756 km
Štiristranska skobeljna WEINIG Quattromat 18 -rabljena-
WEINIGQuattromat 18
Klic
Stanje: rabljeno, Štiristranska skobeljna WEINIG Quattromat 18 - rabljena - Sistem obojestranskih nožev, črpalka za mazivo, preizkušena za prah
----- Tehnični podatki -----
Širina skobljanja: 180 mm, Višina skobljanja: 120 mm, Število vreten: 4, Hitrosti podajanja: 8 m/min, Premer odsesovalnih priključkov: 4x 120 mm, Dimenzije (DxŠxV): 3.050x1.000x1.500 mm, Teža: 1200 kg
Todpoxqd Ahsfx Abgjf
mali oglas
Rattelsdorf
527 km
Oblikovanje in rezkanje
WEINIGHydromat 22 B
Klic
Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B
With grooved bed
10 spindles
Working width: 220 mm
Working height: 120 mm
Spindle diameter: 50 mm
Feed: 7.5 kW / 8–40 m/min
Spindle arrangement:
1–Bottom (7.5 kW) – with hydro clamping
2–Right (7.5 kW)
3–Left (11 kW)
Tsdpfou Udd Sjx Abgsf
4–Right (7.5 kW) – with straight jointer
5–Left (7.5 kW)
6–Top (15 kW) – with hydro clamping
7–Bottom (7.5 kW) – with hydro clamping
8–Top (7.5 kW) – with hydro clamping and straight jointer
9–Bottom (7.5 kW) – with hydro clamping and straight jointer
10–Universal (7.5 kW)
6 powered rollers in the table
mali oglas
Timișoara
483 km
Spawn
WEINIGUNIPLAN
Klic
Stanje: zelo dobro (rabljeno), WEINIG Uniplan double-sided milling machine
Todpfst Uh Dqox Abgef
mali oglas
Saerbeck
858 km
Oblikovanje in rezkanje
WEINIGProfimat 22 N
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Four-Sided Planer
Tsdpfx Abjww A T Usgef
Manufacturer: Weinig
Model: Profimat 22 N
Year of manufacture: 1987
Planing height: 220 mm
Planing width: 120 mm
Number of spindles: 4
Feed speed: 5 – 22 m/min, stepless
Total power approx. 17 kW
Spindle speed: 6,000 rpm
- First spindle: Bottom, 4 kW, tool diameter: 125 mm
- Second spindle: Right, 5.5 kW, tool diameter: 180 mm
- Third spindle: Left, 5.5 kW, tool diameter: 190 mm
- Fourth spindle: Top, 4 kW, tool diameter: 200 mm
mali oglas
Sierakowska Huta
932 km
Dvostranski skobeljnik
WEINIG UNIPLAN
Klic
Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 6946
TEHNIČNI PODATKI
- maks. širina obdelovanca: 210 mm
- maks. debelina obdelovanca: 120 mm
- število vreten: 2 kosa
- premer vretena: 50 mm
Zgornji del:
- 3 dovodni, vlečni, gumirani, gladki valji, od tega 2 dvojna
- 2 izhodna, gumirana, vlečna valja, od tega 1 dvojni
- glave na nosilcih
- nastavitev glav gor/dol
- električna nastavitev višine zgornje glave
Todpfjlhrk Ssx Abgef
- električna nastavitev debeline skobljanja
- vretena opremljena z zavoro
- glavni motor 2×5,5 kW
- brezstopenjska nastavitev hitrosti podajanja
- podajalni motor 3 kW
- podajanje preko kardanske gredi
- premer odsesovalnega priključka 2x160 mm
- dimenzije d/š/v: 2350x1780x1950 mm
- teža: 1882 kg
– nemška proizvodnja
– brušilni nastavki za ostrenje nožev na glavi
– 2 Hydro glavi v kompletu
– ni prebarvana
– zelo dobro stanje, rabljena skobeljna
Cena brez DDV: 33.900 PLN
Cena brez DDV: 8.070 EUR
Cena preračunana po tečaju 4,2 PLN/EUR
(pri večjih spremembah tečaja se cena lahko spremeni)
mali oglas
Mühlhausen
654 km
Popolna skobljalnica z Weinig Powermat 700
WeinigPowermat 700
Klic
Stanje: rabljeno, Postavke strojev za kompakten skobeljni obrat sestavljen iz:
- Štiristranski skobeljni stroj Weinig tip Powermat 700, letnik 2022
- Briketirni stiskalnica Spänex tip SHB 250, letnik 2019
- Vzdolžni krožni žaga Jrion tip HFS-170/15-SA
- Stroj za pakiranje v snope StraPack tip RQ-8S
- Ločilna tračna žaga Hema tip UH 800 TR
- Odsesovalna naprava Spänex Filterturm in ventilator Höcker Polytechnik
Linija je še vedno v obratovanju in si jo lahko kadar koli ogledate pod napetostjo.
Na voljo po dogovoru od marca 2026 dalje.
Tjdpjxmh U Hsfx Abgjf
Dodatne informacije na zahtevo.
Posamična prodaja po dogovoru možna.
mali oglas
Oberkochen
470 km
Štiri stransko skobljalo
WEINIGPowermat 600 Compact
Klic
Stanje: rabljeno, Leto izdelave: 2014, Number of spindles: 5 pcs
Working width: 230 mm
Planing height: 120 mm
Surfacing table length: 2500 mm
Feed motor: 4 kW
Feed speed: 5–30 m/min
Control: Memory function
Weinig Powermat 600 Compact
-----
Machine will be cleaned and fully inspected.
Short summary:
-----
- 5 spindles
- Powerful motors
- Left and top spindles electronically adjustable for width and height
Detailed description:
-----
Technical specifications:
Working width: 20–230 mm
Working height: 10–120 mm
Number of spindles: 5
1st spindle – bottom
-----
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle: 125–145 mm
Tool circle rabbet cutter: 130–160 mm
Axial adjustment range: 5 mm
Rabbetting device
MarathonCoatin for table insert in front of the 1st lower tool holder
Electronic digital display for radial adjustment
2nd spindle – right
-----
Motor with brake: 11.0 kW
Shared motor with left tool holder
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle 40 mm below table level: 93–200 mm
Tool circle 55 mm below table level: 93–180 mm
Max. tool diameter for straight knife heads: 163 mm
Max. tool diameter behind fence: 180 mm
Max. profiling depth: 35 mm
Axial adjustment range: 55 mm
3rd spindle – left
-----
Motor with brake: Shared motor with the 2nd spindle
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle 40 mm below table level: 93–200 mm
Tool circle 55 mm below table level: 93–180 mm
Max. tool diameter for straight knife heads: 163 mm
Max. profiling depth: 35 mm
Axial adjustment range: 55 mm
Radial spindle CNC controlled
4th spindle – top
-----
Motor with brake: 11.0 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle: 93–200 mm
Max. tool diameter for straight knife heads: 180 mm
Max. profiling depth: 35 mm
Axial adjustment range: 40 mm
Radial spindle CNC controlled
Segmented pressure shoe in front of upper tool holder, adjustable to tool circle and can be swung away from the tool, spring-loaded.
Pressure shoe before and discharge after the top spindle with electronic digital displays, integrated into the memory function or PowerCom.
5th spindle – bottom
-----
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle: 93–200 mm
Max. profiling depth: 15 mm
Axial adjustment range: 35 mm
Feed system
-----
Electronic feed, infinitely variable with brake: 4 kW, 5–30 m/min
Infeed roller in front of 1st lower cutter pneumatically controlled up/down.
Tedpfxowzmu Ro Abgof
Durofer pointed tooth rollers with depth limiter and self-cleaning.
Adjustment path of feed rollers relative to left tool holder, axial 35 mm
Machine electrics
-----
Operating voltage: 400 V (voltage range 380-420 V), 50 Hz
All spindles in IE2 design
Electrical equipment according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations not considered.
mali oglas
Rattelsdorf
527 km
Oblikovanje in rezkanje
WeinigHydromat 22BL hartverchromte Tischplatte
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, delovna širina: 220 mm, višina skobljanja: 140 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 140 mm, moč pogonskega motorja podajalnika: 15.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 7, vhodna frekvenca: 50 Hz, Weinig Hydromat 22 BL
7 spindles,
Working width: 220 mm,
Working height: 140 mm,
Spindle diameter: 50 mm,
Feed: 15 kW / 6 – 60 m/min,
Beesjj3Vck9
Spindle arrangement:
1-Bottom (7.5 kW) with hydraulic clamping
2-Right (11 kW)
3-Left (11 kW)
Todoulnr Ajpfx Abgjf
4-Top (11 kW)
5-Bottom (7.5 kW) with hydraulic clamping, straight jointer and profile jointer
6-Top (11 kW) with hydraulic clamping, straight jointer
7-Bottom (11 kW) with hydraulic clamping, straight jointer and profile jointer
6 powered feed rollers in the table
mali oglas
Saerbeck
858 km
Oblikovanje in rezkanje
WEINIGProfimat 23
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Planer and moulder
Tsdsv Id Ngepfx Abgsf
Manufacturer: Weinig
Model: Profimat 23
Year of manufacture: 1995
Working width: 230 mm
Working height: 120 mm
Surfacing table length: 2,000 mm
Spindle speed: 6,000 rpm
Spindle diameter: 40 mm
Feed speed: 4 - 24 m/min
Number of spindles: 6
Grooving saw: Yes
Spindle arrangement: bottom - right - left - right - top - bottom - grooving saw
1st spindle, bottom, 7.5 kW
2nd/3rd spindle, right, left, 7.5 kW each
4th spindle, right, 7.5 kW
5th spindle, top, 7.5 kW
6th spindle, bottom, 4.6 kW
Grooving saw: 2.2 kW
Dimensions: approx. 4,500 x 2,000 x 1,800 mm
Weight: approx. 3.5 t
mali oglas
Sierakowska Huta
932 km
Štiristranski skobeljnik
WEINIG Profimat 22N
Klic
Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7164
TECHNICAL DATA
- Maximum workpiece width: 220 mm
Tedpfxop Dupgj Abgjf
- Maximum workpiece height: 130 mm
4 spindles:
1) Bottom horizontal, 220 mm, approx. 5.5 kW
2) Right vertical, 130 mm
3) Left vertical, 130 mm; (spindles 2 and 3): 7.5 kW
4) Top horizontal, 220 mm, 7.5 kW
- 4th spindle adjustable electrically up/down
- All spindles adjustable up/down, right/left
- Spindle diameter: 40 mm
- 4 feed-in pull rollers with gear teeth, top
- 1 top feed-out pull roller, rubber
- 1 bottom feed-out pull roller, rubber
- Feed on Cardan shafts
- Stepless feed speed adjustment
- Feed motor: 1.5 kW
- Lifting motor: 0.75 kW
- Electric thickness adjustment
- Infeed table length: 1960 mm
- Central lubrication
- Extraction port diameter: 3x120 mm, 140 mm
- Enclosed in a cabinet
- Dimensions (LxWxH): 3430x1500x1430 mm
- Weight: approx. 1500 kg
– For 4 cutterheads
– German-made
– Not repainted
– Used planer, very good condition
Net price: 35,900 PLN
Net price: 8,550 EUR (based on 4.2 EUR exchange rate)
(Prices may vary depending on significant fluctuations)
mali oglas
Oberkochen
470 km
Štiri stransko skobljalo
WEINIGVariomat_Multifunktionstisch
Klic
Stanje: rabljeno, Number of spindles: 5 units
Working width: 20 - 230 mm
Planing height: 8 - 120 mm
Surface table length: 2000 mm
Feed motor: 1.1 kW
Feed speed, steplessly adjustable: 2 - 12 m/min.
1 WEINIG Planing and Moulding Machine VARIOMAT including multifunction/slotting table
-----
Machine will be cleaned and function-tested prior to delivery
Technical manufacturer's description:
-----
Working width: 20 - 230 mm
Working height: 8 - 120 mm
1st spindle horizontal bottom
-----
Motor with brake: 5.5 kW
Diameter: 40 mm
Speed: 6000 rpm
Tool cutting circle: 125 - 145 mm
Axial adjustment: 5 mm
Rebate device incl. rebate cutter
MarathonCoating for table inserts before and after 1st bottom spindle
2nd spindle vertical right
-----
Motor with brake: 11 kW
Common motor with left vertical spindle
Diameter: 40 mm
Electronically adjustable speed: 3000 - 6000 rpm (for 11 kW/15 HP)
Tool cutting circle for longitudinal processing: 93-232 mm
Minimum tool diameter at stop level: 93 mm
Maximum tool diameter behind stop level: 180 mm
Maximum profile depth: 45 mm
Axial adjustment: 30 mm
Insert segment, incl. additional stop lip 125 mm
Tsdpfewugpbox Abgof
Insert segment, incl. additional stop lip 150 mm
3rd spindle vertical left POWERLOCK/HSK
-----
Common motor with 1st right spindle
PowerLock tool holder
Common speed with right vertical spindle
Tool cutting circle for longitudinal processing: 93-232 mm
Maximum profile depth: 45 mm
Minimum profile depth with tool cutting circle 200 mm: 20 mm
Axial adjustment under table: 30 mm
Insert segment 125 mm
Insert segment 150 mm
4th spindle horizontal top
-----
Motor with brake: 5.5 kW
Diameter: 40 mm
Speed: 6000 rpm
Tool cutting circle: 125-200 mm
Maximum profile depth: 30 mm
Minimum profile depth with tool cutting circle 200 mm: 20 mm
Axial adjustment: 30 mm
Glazing bead discharge after top spindle
5th spindle second horizontal bottom
-----
Motor with brake: 4 kW
Diameter: 40 mm
Speed: 6000 rpm
Tool cutting circle: 125-200 mm
Maximum profile depth: 15 mm
Axial adjustment: 10 mm
Machine operation
-----
Both axes of all spindles - except for the 1st bottom spindle - are equipped with mechanical digital readouts.
Central radial adjustment with mechanical digital display for the feed, together with the pressure unit in front of the top spindle.
Pressure unit after the top spindle can be adjusted separately.
Memory function
-----
For storing profile setting values
Tool holder axes and pressure elements before and after the top tool holder with electronic dual displays:
Function:
- Store the setting values of the produced profile with the push of a button under a profile number
- When the profile number is recalled, the electronic dual displays show the setting values
- By manually adjusting the tool holders and pressure elements, the displays are matched accordingly
- 99 memory slots
3-axis CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles No. 2, 3, 4
3 radial CNC-controlled adjustment and posit...
mali oglas
Saerbeck
858 km
Oblikovanje in rezkanje
WEINIGU 23 EL
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Four-Side Planer/Moulder
Manufacturer: Weinig
Model: U 23 EL
Year of manufacture: 1999
Number of spindles: 8
Working width: 20 – 230 mm
Working height: 8 – 120 mm
Straightening table length: 2,500 mm
Feed motor: 4 kW
Feed speed: 4 – 24 m/min
Total connected load: approx. 60 kW
1st spindle: Bottom, horizontal
7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 125 – 180 mm
2nd spindle: Right, vertical
7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 112 – 250 mm
3rd spindle: Left, vertical
7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 112 – 200 mm
4th spindle: Right, vertical
7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 112 – 250 mm
5th spindle: Top, horizontal
7.5 kW, 50 mm diameter, 8,000 rpm, Tool diameter: 112 – 200 mm
6th spindle: Bottom, horizontal
7.5 kW, 50 mm diameter, 7,200 rpm, Tool diameter: 112 – 250 mm
7th spindle: Top, horizontal
Tjdpsvy Ebujfx Abgsf
7.5 kW, 50 mm diameter, 7,200 rpm, Tool diameter: 112 – 250 mm
8th spindle – Saw unit: Top, horizontal
2.2 kW, 40 mm diameter, 8,000 rpm, Tool diameter: 180 mm
Includes two feed tables
mali oglas
Oberkochen
470 km
Štiri stransko skobljalo
WEINIGPowermat 400 CNC_Powerlock
Klic
Stanje: rabljeno, Number of spindles: 6 pcs.
Working width: 230 mm
Planing height: 120 mm
Joiner table length: 2500 mm
Feed motor: 4 kW
Feed speed: 5–30 m/min
Weinig Powermat 400 with HSK/Powerlock, axially/radially CNC-controlled
-----
Machine has been overhauled and function-tested!
Summary:
-----
6 spindles at 8,000 rpm
5 x HSK/Powerlock
Axial and radial CNC adjustment of spindles via control unit
CNC-controlled adjustment and positioning of the feed system
Detailed Description:
-----
Technical specifications:
Working width: 20–230 mm
Working height: 8–120 mm
Number of spindles: 6
1. Tool holder – bottom
-----
Motor with brake: 5.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool diameter range: 93–160 mm
Axial adjustment travel: 5 mm
Rabbetting device
MarathonCoatin for table insert in front of 1st bottom tool holder
2. Tool holder – PowerLock – right
-----
Motor with brake: 11.0 kW
Shared motor with left tool holder
Speed incl. high-performance ball bearings: 8,000 rpm
Tool dia. 40 mm below table: 93–200 mm
Tool dia. 55 mm below table: 93–180 mm
Max. tool diameter for straight cutterheads: 163 mm
Max. tool diameter behind fence line: 180 mm
Max. profiling depth: 35 mm
Axial adjustment travel: 55 mm
CNC-controlled axial and radial spindle adjustment
3. Tool holder – PowerLock – left
-----
Motor with brake: Shared motor with 2nd spindle
Speed incl. high-performance ball bearings: 8,000 rpm
Tool dia. 40 mm below table: 93–200 mm
Tool dia. 55 mm below table: 93–180 mm
Max. tool diameter for straight cutterheads: 163 mm
Max. profiling depth: 35 mm
Axial adjustment travel: 55 mm
CNC-controlled axial and radial spindle adjustment
4. Tool holder – PowerLock – top
-----
Motor with brake: 7.5 kW
Speed incl. high-performance ball bearings: 8,000 rpm
Tool diameter range: 93–200 mm
Max. tool diameter for straight cutterheads: 180 mm
Max. profiling depth: 35 mm
Axial adjustment travel: 40 mm
Divided pressure shoe in front of top tool holder, adjustable to tool diameter
Swivels away from tool, spring-loaded
CNC-controlled radial spindle adjustment
5. Tool holder – PowerLock – top
-----
Motor with brake: 7.5 kW
Speed incl. high-performance ball bearings: 8,000 rpm
Tool diameter range: 93–200 mm
Max. tool diameter for straight cutterheads: 180 mm
Max. profiling depth: 35 mm
Axial adjustment travel: 40 mm
Divided pressure shoe in front of top tool holder, adjustable to tool diameter
Swivels away from tool, spring-loaded
CNC-controlled axial and radial spindle adjustment
6. Tool holder – PowerLock – bottom
-----
Motor with brake: 7.5 kW
Speed incl. high-performance ball bearings: 8,000 rpm
Tool diameter range: 93–200 mm
Max. profiling depth: 15 mm
Axial adjustment travel: 35 mm
CNC-controlled radial spindle adjustment
Feed system
-----
Frequency-controlled feed, stepless adjustment with brake: 4 kW, 5–30 m/min
Tedpfjuzaa Sox Abgof
Indiv...
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Oberkochen
470 km
Avtomatski stroj za vrezovanje
WEINIGUnivar 10/3
Klic
Stanje: rabljeno, Number of spindles: 4 pcs
Number of tool sets: 11 pcs
Spindle diameter: 50,40 mm
Spindle length: 285,125 mm
Length: 4000 mm
Width: 2000 mm
Height: 2200 mm
Weinig Univar 10/3 Profile Reworking Machine
-----
For re-profiling of windows, doors, and similar items featuring asymmetrical perimeter profiles. Suitable for timber thicknesses from 68 to 92 mm.
Processing time per frame re-profiling for a medium size (1.20 x 1.20 m) – approx. 2 min.
Available tool positions can be selected via the operator control panel.
The machine is equipped with three hydraulically controlled right-side precision lifting spindles, designed to accommodate three tool sets, each spindle providing 2 x 95 mm vertical spindle stroke. The spindle stroke is performed in a U-motion, enabling minimal opening in the milling fence when processing short parts. Spindle stroke can be finely adjusted horizontally for both tool positions from the operator side. Centralized lubrication for spindle units.
For tear-free re-profiling of window sashes or frames and doors, the first spindle can be selected for clockwise or counterclockwise rotation.
At each of the last 100 mm at the end of a frame, this spindle with the corresponding climb-cutting tool plunges into the passing timber. This prevents tear-out caused by the following counter-rotating milling spindle. The first seven transport rollers can be lifted via foot pedal, shortening the throughput time. An additional support rail permits re-profiling of large-format frames as well.
Continuous, chainless rubber roller feed with extremely short roller spacing. Feed beam height is electronically measured and displayed.
Electrical design according to VDE standards.
Machine is supplied with operation tools, but without machining tools.
Technical data:
Working width min. 40 mm
Working height min. 30 mm, max. 100 mm
1st Profile Spindle (climb and counter-rotation)
-----
Spindle motor power: 11.0 kW
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Clamping length: 285 mm
Tool base circle: 112 - 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Home position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
With automatic climb-cutting plunge mechanism
2nd Profile Spindle
-----
Spindle motor power: 11.0 kW
Spindle speed: 6000 rpm
Tedovnv Uuspfx Abgjf
Spindle diameter: 50 mm
Clamping length: 285 mm
Tool base circle: 112 - 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Home position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
3rd Profile Spindle
-----
Spindle motor power: 11.0 kW
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Clamping length: 285 mm
Tool base circle: 112 - 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Home position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
4th Profile Spindle – Fitting (hardware) unit, right
-----
For machining the hardware groove during the re-profiling pass or for grooving along the longitudinal profile.
Pneumatic horizontal movement with selector switch at the operator control panel.
Motor power: 2.2 kW
Speed: 6,000 rpm
Spindle diameter: 40 mm
Clamping height: 125 mm (for 2 tools)
Tool cutting circle min. 140 mm, max. 180 mm
Feed motor power: 1.1 kW
Feed speed...
mali oglas
Oberkochen
470 km
Okenski sistem
WEINIGUnicontrol 6 NC-Spindeln
Klic
Stanje: rabljeno, Keyway Spindle 1 pc.
Number of Milling Units: 5 pcs.
Spindle Diameter: 50 mm
Control System: Weinig, PC-Nexus
#2774 Weinig Unicontrol 6 with NC Spindles
Machine is cleaned and fully inspected prior to delivery
Technical Data Summary
(Please enquire about any additional included accessories)
Pos. 1: Cross-Cut Saw
-----
> Number of Tools: 1 pc.
> Spindle Speed: 2,800 rpm
> Spindle Diameter: 40 mm
> Max. Tool Diameter: 400 mm
> Motor Power: 3 kW
> Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding
> Laser Guidance for cutting section detection
Pos. 2: Rounding Unit, Horizontal Lower
-----
> Position: horizontal, lower
> Motor Power: 1.5 kW
> Spindle Diameter: 20 mm
> Clamping Length: 25 mm
> Spindle Speed: 9,000 rpm
> Max. Cutting Circle: 130 mm
> Axial Adjustment mechanically linked with cross-cut saw
> Radial Adjustment pneumatically controlled, on/off
Tjdevu Hghopfx Abgef
NC-Controlled Length Stop
-----
> Length: 3,500 mm
> Electronic length stop
Pos. 3: Tenoning and Keyway Spindle
-----
> Number of Tools: variable, stepless adjustment, NC controlled
> Tool Clamping Length: 320 mm
> Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled
> Spindle Speed: 3,500 rpm
> Max. Cutting Circle: 320 mm
> Spindle Diameter: 50 mm
> Max. Tool Diameter: 320 mm
> Motor Power: 11 kW
Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling)
-----
> Position: vertical, right
> Number of Tools: 1 pc.
> Tool Clamping Length: 120 mm
> Spindle Speed: 6,000 rpm
> Spindle Diameter: 50 mm
> Max. Cutting Circle: 232 mm
> Motor Power: 7.5 kW
Pos. 5: 2nd Profiling Spindle
-----
> Position: vertical, right
> Number of Tools: variable, stepless adjustment, NC controlled
> Tool Clamping Length: 320 mm
> Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled
> Spindle Speed: 6,000 rpm
> Spindle Diameter: 50 mm
> Max. Cutting Circle: 232 mm
> Motor Power: 11 kW
2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions
Sash Bar Guide consisting of:
Guide rail at the stop (climb milling section),
Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle.
Pos. 6: Profiling Milling Unit, Horizontal Upper
-----
> Clamping Length: 40 mm
> Spindle Diameter: 40 mm
> Motor Power: 3.0 kW
> Speed: 9,000 rpm
> Max. Cutting Circle: 130 mm
> Axial Adjustment: 30 mm, 8 positions
> Radial Adjustment: 125 mm, 8 positions
Pos. 7: 3rd Profiling Spindle (Fitting Spindle)
-----
> Position: vertical, right
> Tool Clamping Length: 160 mm
> Axial Adjustment: 115 mm, 8 positions
> Radial Adjustment: 110 mm, 8-position turret
> Spindle Speed: 5,850 rpm
> Spindle Diameter: 40 mm
> Max. Cutting Circle: 210 mm
> Motor Power: 3.0 kW
Pos. 8: Profile Milling/Grooving Unit, Bottom
-----
> Motor Power: 3.0 kW
> Tool Clamping Length: 125 mm
> ...
mali oglas
Oberkochen
470 km
Okenski sistem
WEINIGUnicontrol 6 NC Spindeln
Klic
Stanje: rabljeno, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
# 2764 Weinig Unicontrol 6 with NC spindles
-----
Machine will be cleaned and thoroughly inspected before delivery
Technical Data Summary
(For any additionally included accessories, please inquire)
Pos. 1: Cross-cut saw
-----
> Cross-cut saw, electronic, horizontally infinitely adjustable
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Maximum tool diameter: 400 mm
> Motor power: 3.0 kW
> Laser line for identifying the saw cut
> NC length stop, mounted on slotted table included
Positioning of the cross-cut saw integrated into control system.
> Length: 3500 mm
Pos. 2: Tenon and slot spindle
-----
> Number of tools: variable, infinitely adjustable NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis
> Spindle speed: 3500 rpm
> Spindle diameter: 50 mm
> Maximum tool diameter: 320 mm
> Motor power: 11 kW
Pos. 3: 1st profiling spindle (climb-cut and counter-rotation)
> Position: vertical right
> Number of tools: 1 pc.
> Tool clamping length: 120 mm
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Max. tool swing: 232 mm
> Motor power: 7.5 kW
Pos. 4: 2nd profiling spindle
-----
> Position: vertical right
> Number of tools: variable, infinitely adjustable NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Max. tool swing: 232 mm
> Motor power: 11 kW
2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions
Sash guide consisting of:
Guide rail in the stop (area of climb-cut spindle),
Sash support bar from above in the area of vertical right profile milling unit and profiling spindle.
Pos. 5: Profile milling unit horizontal, top
-----
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.0 kW
> Speed: 5,850 rpm
> Max. tool swing: 130 mm
> Axial adjustment 30 mm, 8 positions via pneumatic turret
> Radial adjustment 125 mm, 8 positions via pneumatic turret
Pos. 6: 3rd profiling spindle (hardware spindle)
-----
> Position: vertical right
> Tool clamping length: 160 mm
> Axial adjustment 115 mm, 8 positions via pneumatic turret
> Radial adjustment 100 mm, 8 positions via pneumatic turret
> Spindle speed: 5,850 rpm
Tjdpfx Absvu Hfqegof
> Spindle diameter: 40 mm
> Max. tool swing: 210 mm
> Motor power: 3.0 kW
Additional features
-----
> Network-capable
> Rebate unit for tear-free rebating
> Double-part package
> Return conveyor for one-man operation: pivoting belt
> Screen control
> Tilt window device
> Electronic angle display for tilt windows
> Industrial PC, PC control/NEXUS
> Weinig type production program
> Without machining tools
No original pictures available yet.
Photos show an identical machine from our archive.
-----
Price for the above machine on request!
-----
Optional at extra cost: EUR 6,500.00
Note...
mali oglas
Oberkochen
470 km
Štiri stransko skobljalo
WEINIGPowermat 1200 EM 100 High-Mech
Klic
Stanje: rabljeno, Number of spindles: 6 units
Working width: 230 mm
Planing height: 160 mm
Jointing table length: 1050 mm
Feed motor: 7 kW
Feed speed: 6-40 m/min
Weinig Powermat 1200
---
with infeed automation Weinig wheel magazine EM 100, linked to outfeed automation Weinig High-Mech A 1
The machine is completely overhauled at our warehouse prior to delivery!
Detailed description:
---
1. Weinig Planing and Moulding Machine Powermat 1200
---
Technical data:
---
Working width: 20 - 230 mm (with tooling diameter 93 - 163 mm)
Working height: 10 - 160 mm (with tooling diameter 93 - 163 mm)
1st spindle
---
First lower horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tooling diameter: 125 - 180 mm
With PowerLock: 93 - 180 mm
Tooling diameter for rebate cutters: 130-160 mm
Axial adjustment: 17 mm
Rebate device
MarathonCoating in front of first lower tool holder
2nd spindle
---
First right vertical spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tooling diameter: 93 - 200 mm
Maximum moulding depth: 35 mm
Tedpfjvnwbcsx Abgsf
Axial adjustment: 80 mm
Radial adjustment
Min. tool diameter at fence level: 93 mm
Max. tool diameter behind fence level: 200 mm
3rd spindle
---
First left vertical spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tooling diameter: 93 - 200 mm
Tooling diameter for straight knife heads max.: 163 mm
Maximum moulding depth: 35 mm
Axial adjustment: 80 mm
Pressure shoe before left tool holder, includes 2 lateral pressure rollers, spring-loaded
4th spindle
---
First upper horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tooling diameter: 93 - 200 mm
Tooling diameter for straight knife heads max.: 163 mm
Maximum moulding depth: 35 mm
Axial adjustment: 40 mm
Divided pressure shoe ahead of upper tool holder on tooling circle, adjustable, can be swung away from tool, spring-loaded.
Upper spindle prepared for later installation of cassette system
5th spindle
---
Second upper horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tooling diameter: 93 - 200 mm
Tooling diameter for straight knife heads max.: 163 mm
Maximum moulding depth: 35 mm
Axial adjustment: 40 mm
Divided pressure shoe ahead of upper tool holder on tooling circle, adjustable, can be swung away from tool, spring-loaded.
Upper spindle prepared for later installation of cassette system
6th spindle
---
Second lower horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tooling diameter: 93 - 225 mm
Maximum moulding depth: 15 mm
Axial adjustment: 40 mm
Radial adjustment
Min. tool diameter at table level: 93 mm
Max. tool diameter 6 mm below table level: 225 mm
All spindles with high concentricity accuracy.
Lubrication points for axial tool adjustment movement.
Feed system
---
Electronic feed, infinitely variable with brake 6-40 m/min, motor: 7 kW
...
Olajšamo vam iskanje: "weinig conturex"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Weinig Conturex (470)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- Grecon
- Kombinirka Skobljanje
- Opticut
- Weinig Hydromat 23
- Weinig Opticut
- Weinig Powermat 1200
- Weinig Powermat 2000
- Weinig Powermat 2500
- Weinig Powermat 400

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



































































































































































































































