Weeke Venture 1 nakup rabljenega (80)

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Gjdod Nvi Dopfx Aa Usuc Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) Gujdogwbbqjpfx Aa Usc No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Contro Open powerTouch, Software: WoodWOP (TAPIO Ready) Infeed Table (panel support) + Outfeed Table (panel support) Panel feed via 3 transport belts Min. workpiece dimensions (X-Y-Z): 250 x 100 x 12 mm Max. workpiece dimensions (X-Y-Z): 2500 x 1050 x 60 mm Special lateral guiding system for workpieces with "sensitive" edges 3 upper vertical pressure devices Powered conveyor belt for waste disposal Integrated electrical and control cabinet Total installed power: approx. 47 kW OPTIONAL: Wireless barcode scanner Gedpfox Aqi Esx Aa Ueuc 2 WORKING UNITS (TOP) – (SERVO MOTOR for X-Y-Z axis): 4 V15 drilling heads (4 x 2.3 kW) each with 15 vertical spindles (total of 60 upper spindles) 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR for X-Y-Z axis): 6 V32 drilling heads (6 x 2.3 kW) each with 32 vertical spindles (total of 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 H21 drilling heads (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Gjdsh Ryhnopfx Aa Usuc Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), stationary operating head – Horizontal table (workpiece) Control unit: PowerControl (woodWOP software) Operator head safety enclosure 2x safety interlock workpiece clamping chucks in the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamp grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) Includes automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) Separate electrical and control cabinet UPPER MACHINING UNITS: 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW) LOWER MACHINING UNITS: Gedpfx Ajlkdpmea Ueuc 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW)

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Godpfx Aajvhcbzs Uouc Minimum working width (mm): 250 No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Guedpfoivawpox Aa Uoc Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Gujdpfx Ash E Sghea Usc Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: zelo dobro (rabljeno), PC-krmiljenje Power Control PC85T Programska oprema WoodWOP + TOPDRILL Št. 2 prehodnih motoriziranih transportnih trakov Št. 2 horizontalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 1 vrtalna enota za vsak horizontalni vrtalni nosilec (1 x 1,5 kW) Št. 21 vreten za vsako horizontalno vrtalno enoto Največja delovna širina (mm) 2500 Najmanjša delovna širina (mm) 250 Guedpfxoyv Ev As Aa Uoc Št. 4 spodnji vertikalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 2 vrtalni enoti za vsak spodnji vertikalni vrtalni nosilec (2 x 1,5 kW) Št. 4 zgornje vertikalne vpenjalne enote za obdelovance Transportni trak za odvoz odrezkov Skupna priključna moč (kW) 35

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, številka stroja/vozila: 0-250-11-2614, Funkcionalnost: popolnoma funkcionalen, Spodnja podporna enota za obdelavo Zgornja podporna enota za obdelavo Dolžina obdelovanca: min. 250 – maks. 3000 mm Širina obdelovanca: min. 70 – maks. 1000 mm Debelina obdelovanca: min. 8 mm – maks. 80 mm Gusdpfxoy Ezgie Aa Uec Zlaganje obdelovancev: maks. 2 kosa Oprema: POSTAJE ZA VSTAVLJANJE MOŽNIKOV x 2 VERTIKALNA VRTALNA ENOTA 2 V 38 HIGH SPEED 7500 HORIZONTALNA VRTALNA ENOTA 2H8X/2 Y REZALNA ENOTA ZA UTORJE N2 X-Y 90 REZKALNA ENOTA F2-ETP- 6 KW KRIMINALNI SISTEM: POWERCONTROL S POWERTOUCH SISTEM ZA BRANJE ČRTNIH KOD FUNKCIJA VARČEVANJA Z ENERGIJO

Stanje: rabljeno, številka stroja/vozila: 007734, Delovno območje os X: 3050 mm Delovno območje os Y: 850 mm Moč glavnega vretena: 5 kW Godpfxjw Idb He Aa Ujuc Število vrtalnih vreten: 19

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 Gsdpolikvhefx Aa Uouc X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, število osi: 3, Ta 3-osni Weeke Optimat BHP Vantage 24M je bil izdelan leta 2011. Kot robusten CNC obdelovalni center zagotavlja natančnost in učinkovitost pri različnih obdelovalnih nalogah. Razmislite o nakupu tega CNC obdelovalnega centra Weeke Optimat BHP Vantage 24M. Kontaktirajte nas za več informacij. Godpfx Aox D D Ttoa Uouc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.035 mm, pomik osi Y: 1.720 mm, pomik po osi Z: 380 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Ponujamo pripravljeno obdelovalno središče Weeke Optimat BHC 550, letnik 2003. Proizvajalec: Weeke Model: Optimat BHC 550 Letnik: 2003 Stanje: pripravljeno za uporabo Guodpfxex Nw Drs Aa Ujc Vrsta stroja: obdelovalno središče Za vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, številka stroja/vozila: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm Number of injectors: 14 Godpfx Aaoiwptue Ueuc Positioning via NC control: yes

Stanje: rabljeno, številka stroja/vozila: 007202, Max. panel width: 2500 mm Guedpfou Rv Ukjx Aa Uec Max. panel length: 1000 mm Number of units: 3

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.000 kg, CNC obdelovalni center WEEKE OPTIMAT BHX 500 z vključenim podajalnikom materiala "IgeL-ROBOT" Podpora obdelave spodaj Podpora obdelave zgoraj Dolžina obdelovanca: min. 250 - maks. 2500 mm Širina obdelovanca: min. 70 - maks. 1000 mm Debelina obdelovanca: min. 4 mm – maks. 80 mm Zlaganje obdelovancev: maks. 2 kosa Vektorska hitrost: X-os vpenjalne glave = 138 m/min; Y-os = 80 m/min; Z-os = 50 m/min Oprema zgoraj, spodaj: VERTIKALNA VRTALNA ENOTA 2 V 21 HIGH SPEED 7500 HORIZONTALNA VRTALNA ENOTA 2H4X/2Y ENOTA ZA REZANJE UTOROV N2 X-Y 90 REZKALNA ENOTA F2-ETP- 6 KW Gjdjyyb N Hjpfx Aa Usuc Čitalec črtne kode proizvajalec: Datalogic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, številka stroja/vozila: 0-250-12-2554, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 1.000 mm, širina obdelovanca (maks.): 3.000 mm, višina obdelovanca (maks.): 80 mm, model krmilnika: PC 85, DÉTAILS TECHNIQUES Largeur de la pièce min. : 250 mm Largeur de la pièce max. : 3 000 mm Longueur de la pièce min. : 100 mm Longueur de la pièce max. : 1 000 mm Hauteur de la pièce min. : 8 mm Hauteur de la pièce max. : 80 mm Gusdjydnu Nopfx Aa Uoc Unité de travail verticale supérieure Broche verticale ETP-6 puissance : 6 kW Diamètre de la fraise à rainurer : 125 mm Broches de perçage verticales : 32 (puissance 2,7 kW) Broches de perçage horizontales : 10 (8 en X + 2 en Y) Unité de travail verticale inférieure Broche verticale ETP-6 puissance : 6 kW Diamètre de la fraise à rainurer : 125 mm Broches de perçage verticales : 32 (puissance 2,7 kW) Broches de perçage horizontales : 10 (8 en X + 2 en Y) DÉTAILS DE LA MACHINE Commande : PC 85 Logiciel : woodWOP 6 ÉQUIPEMENT Cabine de sécurité pour outillage 2 mandrins de serrage pour le blocage et le déplacement de la pièce pendant l'usinage Banc de chargement avec table à coussin d'air Convoyeur à rouleaux motorisé pour l'évacuation des panneaux Possibilité d'usinage simultané de deux panneaux

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, model krmilnika: POWER PC 85 + WOODWOP 6.0, delovna širina: 850 mm, delovna višina: 60 mm, delovna dolžina: 3.050 mm, TEHNIČNI PODATKI Delovne dimenzije: 3.050 x 850 mm Delovna višina: 12 - 60 mm Vrtalna glava Vertikalna vretena X-os: 8 Vertikalna vretena Y-os: 5 Horizontalna vretena X-os: 4 Horizontalna vretena Y-os: 2 Gusdjydmcrjpfx Aa Uoc Glava za rezkanje Osi: 3 Menjava orodja: Avtomatska Premer integrirane žagine enote: 100 mm PODROBNOSTI O STROJU Krmiljenje: POWER PC 85 + WOODWOP 6.0 (posodobljeno 2023) OPREMA 4-pozicijski avtomatski izmenjevalec orodij

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1976, številka stroja/vozila: 1299, Značka: Weeke Model: PE 75 Gsdpfeu Nwzcox Aa Uouc Rok výroby: 1976 Motor: 7,5 kW, 50 Hz, 380V, trojfázový Skladové číslo: 10316

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.700 mm, pomik osi Y: 1.550 mm, hitrost pomika os X: 96 m/min, hitrost podajanja osi Y: 96 m/min, največja hitrost vrtenja: 24.000 obr/min, DÉTAILS TECHNIQUES Course axe X : 3 700 mm Course axe Y : 1 550 mm Course axe X (levée) : 4 538 mm Course axe Y (levée) : 1 952 mm Passage maximal de la pièce : 100 mm Vitesse de déplacement axe X : 96 m/min Vitesse de déplacement axe Y : 96 m/min Vitesse de déplacement axe Z : 25 m/min Nombre d’axes commandés : 3 axes Nombre de broches de perçage : 7 Gusdpsxw Up Sefx Aa Uec Nombre de positions d’outils : 8 Table de nesting Longueur : 1 550 mm Largeur : 3 700 mm Matériau : Bakélite Nombre de pompes : 4 Capacité individuelle : 108 m³/h Unité de perçage Unité : supérieure Broches pour perçages verticaux : 7 Unité de fraisage Unité : supérieure Nombre d’axes commandés : 3 Changeur d’outils automatique : oui Puissance du moteur : 9 kW Vitesse max. : 24 000 tr/min DÉTAILS MACHINE Puissance totale installée : 26 kW ÉQUIPEMENT Pompe à vide Système de contrôle PC85 Logiciel WoodWOP Marquage CE Rideaux immatériels de sécurité Remarque : Les outils ne sont pas compris dans l’offre.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Weeke BHX 500 – Operator Side Right Weeke machining centre equipped with one processing support each on the top and bottom Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2500 mm Min. workpiece width: 70 mm Max. workpiece width: 1000 mm Min. workpiece thickness: 8 mm (2*4mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pcs. Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit located in both the upper and lower processing supports, each with 21 individually controllable drilling spindles (with variable speed range). 2H4X/1Y Horizontal drilling unit located in both the upper and lower processing supports, each with 10 program-selectable drilling spindles. 8 drilling spindles each: in X-direction Gusdpsx S Hzljfx Aa Usc 2 drilling spindles each: in Y-direction N2 X-Y 90° Grooving saw aggregate in both the upper and lower processing support for machining in X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL INFORMATION FOR GROOVE SAW BLADE The saw blade width can be 8.4 mm. The chip removal cross section must not exceed 70 mm². F2-ETP-6 KW Milling unit located in both the upper and lower processing support, suitable for shaft-type tools. Manual tool change. Tool clamping: manual, ETP 25 hydro quick-clamp system Rotation direction: right/left Speed: 6,000 – 18,000 rpm, infinitely variable via program Processing up to 3000 mm Infeed table with automatic workpiece feeding and positioning Workpiece unloading zone with cross-belt conveyor and lifting forks – Workpiece length measurement in the machine – Mobile operator terminal – Barcode software incl. scanner

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical drilling unit 2V21 HIGH SPEED 7500 Stroke in Z-direction: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle pitch: 32 mm Spindle type: individually controlled Horizontal drilling unit 2H4X/1Y 4 drill spindles each in X-direction 1 drill spindle each in Y-direction Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm from workpiece top edge Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Gusdpfxsyg E R Hs Aa Uec Max. drill diameter: 20 mm Spindle type: individually controlled Grooving saw unit N2 X-Y 90° Cutting depth: 30 mm Cutting cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling unit F2-ETP-6 KW Tool holder: for shank diameter d = 25 mm Tool diameter: max. 60 mm Tool projection length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool clamping: manual, hydro quick-change system ETP 25 Rotation direction: clockwise/counterclockwise Speed: 6,000 - 18,000 rpm, stepless programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material loading "IgeL-ROBOT" Lower workpiece support Upper workpiece support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader, make: Datalogic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, številka stroja/vozila: 0-250-18-0294, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.900 mm, pomik osi Y: 1.350 mm, pomik po osi Z: 370 mm, dolžina mize: 3.550 mm, širina mize: 1.355 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe pomeni obveznost pravočasnega prevzema do konca 45. tedna! TEHNIČNI PODATKI Pomik X osi: 3.900 mm Pomik Y osi: 1.350 mm Pomik Z osi: 370 mm Število rezkalnih vreten: 1 Dolžina mize: 3.550 mm Širina mize: 1.355 mm Delovno območje Z osi: 100 mm PODROBNOSTI O STROJU Teža: 4.500 kg Moč: 22,0 kW OPREMA Svedralno orodje Guedpfx Aajxgd Ezj Uec Dokumentacija CE označba

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, številka stroja/vozila: 0-250-15-0310, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.250 mm, pomik osi Y: 1.300 mm, število mest v zalogovniku orodij: 9, hitro pomikanje X-os: 80 m/min, premer obdelovanca (maks.): 60 mm, DÉTAILS TECHNIQUES Courses de déplacement Course axe X : 6 250 mm Course axe Y : 1 300 mm Avances rapides Avance rapide axe X : 80 m/min Avance rapide axe Y : 60 m/min Avance rapide axe Z : 20 m/min Course axe X : 8 360 mm Course axe Y : 2 015 mm Puissance moteur broche principale : 9 kW Nombre d’axes contrôlés : 3 Nombre de broches de perçage : 50 Diamètre maximal de la pièce : 60 mm Positions d’outils : 9 (8 dans le magasin d’outils 1, 1 dans le magasin d’outils 2) DÉTAILS MACHINE Puissance totale installée : 18 kW Système de commande : HOMATIC-200 Modèle de commande : WOODWOP 7.0 Norme de sécurité : Marquage CE ÉQUIPEMENT Documentation/manuel Vitesse réglable en continu Changeur d’outils automatique Pompe à vide Surface de travail avec supports à consoles à vide Éléments d’aspiration pour maintenir la pièce usinée 1 unité de fraisage 2 unités de perçage (25 broches chacune) 2 unités de coupe Gujdpoxdw Tgofx Aa Uec Remarque : Les outils ne sont pas inclus dans la vente ni dans la livraison.