Stroj za vrtanje CNC

WEEKE BHX 500

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Moving table (workpiece), static working head – horizontal table (workpiece). Control system: PowerControl PC86 powerTouch (woodWOP software). Safety enclosure for the working head. No. 2 workpiece clamps for access to the working area. WEEKE pre-positioning unit for quick positioning of workpieces in the machine with clamping jaws. Support table (workpiece support) at infeed; outfeed table (with powered belt). With automatic panel pusher. Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm). Gjdoyyvttepfx Af Ssbk Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (optional 1300) x 80 (2 x 40 mm). Simultaneous processing of up to 2 workpieces (on the Z-axis). Separate switch cabinet and operator console. WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW). WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW).

Stanje: dober (rabljeno), Leto izdelave: 2019, CNC throughfeed machining center with dual clamp drive in X-axis direction and gantry construction in Y-axis direction. The second gripper enables sizing down to 15 mm as well as continuous milling movement in the X-axis direction. The workpiece is measured in length (X-axis) using a sensor. Working area: X-axis 3,500 mm Y-axis 950 mm Z-axis 80 mm Milling spindle: 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Gedpfxsxrahcj Af Sebk Maximum tool diameter: 120 mm Maximum tool length: 100 mm Single pick-up station for ergonomic tool loading or unloading into/out of the machine. Alternatively, can be used as an additional tool station for 11 virtual tools. Automatic tool length measuring system in Z-direction Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter 8 mm; lengths: 20, 25, 30, 35, or 40 mm Front and rear air cushion tables, foldable Machine software WOODFLASH including: - CNC board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision detection for WOODFLASH on the machine Workpiece release at the rear side of the machine Machine delivered without tools and HSK holders.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.000 kg, CNC obdelovalni center WEEKE OPTIMAT BHX 500 z vključenim podajalnikom materiala "IgeL-ROBOT" Podpora obdelave spodaj Podpora obdelave zgoraj Dolžina obdelovanca: min. 250 - maks. 2500 mm Širina obdelovanca: min. 70 - maks. 1000 mm Debelina obdelovanca: min. 4 mm – maks. 80 mm Zlaganje obdelovancev: maks. 2 kosa Vektorska hitrost: X-os vpenjalne glave = 138 m/min; Y-os = 80 m/min; Z-os = 50 m/min Oprema zgoraj, spodaj: VERTIKALNA VRTALNA ENOTA 2 V 21 HIGH SPEED 7500 HORIZONTALNA VRTALNA ENOTA 2H4X/2Y ENOTA ZA REZANJE UTOROV N2 X-Y 90 Gjdpfx Afjyyb N Hs Sebk REZKALNA ENOTA F2-ETP- 6 KW Čitalec črtne kode proizvajalec: Datalogic

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Prodam vertikalni CNC obdelovalni center Weeke Optimat BHX 500, letnik 2007, namenjen za vrtanje, rezkanje in izdelavo utorov v ploščinske materiale v pohištveni industriji. Stroj omogoča hitro in natančno obdelavo elementov ter je primeren za serijsko ali individualno proizvodnjo pohištva. Tehnični podatki: • Model: Weeke Optimat BHX 500 • Letnik: 2007 • Tip stroja: 3 osni pretočni CNC obdelovalni center • CNC krmiljenje: WoodWOP (Homag / Weeke) • Maksimalna dolžina obdelovanca: cca 3050 mm • Maksimalna širina obdelovanca: cca 1200 mm • Maksimalna debelina obdelovanca: 80 mm • Minimalna dolžina obdelovanca: cca 200 mm • Minimalna širina obdelovanca: cca 70 mm Gbodpfsywgb Njx Af Sjk Oprema: • vrtalna glava z več vertikalnimi in horizontalnimi vreteni • 96 vrtalnih vreten (48 zgoraj, 48 spodaj) • 36 vertikalnih orodij • 12 horizontalnih orodij • žaga za utore • rezkar zgoraj, spodaj • žaga (125mm) vrtljiva za 90° • samodejni kleščni transport obdelovanca Uporaba: • vrtanje za moznike, okovje • rezkanje in utori • obdelava iverala, MDF, HDF, vezanih plošč in masive Prednosti: • možnost obdelave dveh kosov hkrati, kar bistveno poveča produktivnost • hitra priprava in menjava obdelovancev • visoka natančnost vrtanja in rezkanja • idealen za proizvodnjo korpusnega pohištva, kuhinj, omar in notranje opreme Stanje: • stroj je redno vzdrževan in delujoč • možen preizkus ob ogledu Dobava: Junij 2026

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Gbedpfxoug Ty Ho Af Ssk Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Gbsdox D Nvgjpfx Af Sjk Ta 3-osni stroj HOMAG WEEKE OPTIMAT BHX 500 je bil izdelan leta 2011. Ponaša se z robustnim CNC obdelovalnim centrom z delovnim območjem 2500 mm x 1300 mm, glavno elektro vreteno ima moč 6 kW, največja debelina obdelovanca pa je 80 mm. Vključuje 84 vrtalnih vreten in dvojni rezkalni vreteni, vsaka z močjo 6 kW pri 18.000 vrtljajih/min. Če želite kakovostne CNC zmogljivosti, razmislite o stroju HOMAG WEEKE OPTIMAT BHX 500, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe CNC obdelava lesa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical drilling unit 2V21 HIGH SPEED 7500 Stroke in Z-direction: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Gbedpsyg E R Hefx Af Sjk Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle pitch: 32 mm Spindle type: individually controlled Horizontal drilling unit 2H4X/1Y 4 drill spindles each in X-direction 1 drill spindle each in Y-direction Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm from workpiece top edge Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Spindle type: individually controlled Grooving saw unit N2 X-Y 90° Cutting depth: 30 mm Cutting cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling unit F2-ETP-6 KW Tool holder: for shank diameter d = 25 mm Tool diameter: max. 60 mm Tool projection length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool clamping: manual, hydro quick-change system ETP 25 Rotation direction: clockwise/counterclockwise Speed: 6,000 - 18,000 rpm, stepless programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material loading "IgeL-ROBOT" Lower workpiece support Upper workpiece support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader, make: Datalogic

Stanje: novo, Leto izdelave: 2026, Sestava sistemov za ravnanje s korpusi za izdelavo ročne, polavtomatske ali popolnoma avtomatske montažne linije za korpuse je vedno izvedena glede na zahteve stranke. Gbodpsdx R D Defx Af Ssk Montažne linije za korpuse, ki vam olajšajo delo, zmanjšajo čase nastavljanja ter povečajo proizvodno zmogljivost, vam z veseljem podrobno predstavimo ob osebnem pogovoru.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Weeke BHX 500 – Operator Side Right Weeke machining centre equipped with one processing support each on the top and bottom Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2500 mm Min. workpiece width: 70 mm Gsdpox S Hzljfx Af Sebk Max. workpiece width: 1000 mm Min. workpiece thickness: 8 mm (2*4mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pcs. Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit located in both the upper and lower processing supports, each with 21 individually controllable drilling spindles (with variable speed range). 2H4X/1Y Horizontal drilling unit located in both the upper and lower processing supports, each with 10 program-selectable drilling spindles. 8 drilling spindles each: in X-direction 2 drilling spindles each: in Y-direction N2 X-Y 90° Grooving saw aggregate in both the upper and lower processing support for machining in X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL INFORMATION FOR GROOVE SAW BLADE The saw blade width can be 8.4 mm. The chip removal cross section must not exceed 70 mm². F2-ETP-6 KW Milling unit located in both the upper and lower processing support, suitable for shaft-type tools. Manual tool change. Tool clamping: manual, ETP 25 hydro quick-clamp system Rotation direction: right/left Speed: 6,000 – 18,000 rpm, infinitely variable via program Processing up to 3000 mm Infeed table with automatic workpiece feeding and positioning Workpiece unloading zone with cross-belt conveyor and lifting forks – Workpiece length measurement in the machine – Mobile operator terminal – Barcode software incl. scanner

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, številka stroja/vozila: 0-250-12-2554, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 1.000 mm, širina obdelovanca (maks.): 3.000 mm, višina obdelovanca (maks.): 80 mm, model krmilnika: PC 85, DÉTAILS TECHNIQUES Largeur de la pièce min. : 250 mm Largeur de la pièce max. : 3 000 mm Longueur de la pièce min. : 100 mm Longueur de la pièce max. : 1 000 mm Hauteur de la pièce min. : 8 mm Gsdpfsydnu Nex Af Sebk Hauteur de la pièce max. : 80 mm Unité de travail verticale supérieure Broche verticale ETP-6 puissance : 6 kW Diamètre de la fraise à rainurer : 125 mm Broches de perçage verticales : 32 (puissance 2,7 kW) Broches de perçage horizontales : 10 (8 en X + 2 en Y) Unité de travail verticale inférieure Broche verticale ETP-6 puissance : 6 kW Diamètre de la fraise à rainurer : 125 mm Broches de perçage verticales : 32 (puissance 2,7 kW) Broches de perçage horizontales : 10 (8 en X + 2 en Y) DÉTAILS DE LA MACHINE Commande : PC 85 Logiciel : woodWOP 6 ÉQUIPEMENT Cabine de sécurité pour outillage 2 mandrins de serrage pour le blocage et le déplacement de la pièce pendant l'usinage Banc de chargement avec table à coussin d'air Convoyeur à rouleaux motorisé pour l'évacuation des panneaux Possibilité d'usinage simultané de deux panneaux

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Gsdjxy Tmnspfx Af Sjbk Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), stationary operating head – Horizontal table (workpiece) Control unit: PowerControl (woodWOP software) Operator head safety enclosure 2x safety interlock workpiece clamping chucks in the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamp grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) Includes automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) Separate electrical and control cabinet UPPER MACHINING UNITS: Gsdpfx Afslkdpmj Sjbk 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW) LOWER MACHINING UNITS: 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 23.983 h, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, višina obdelovanca (maks.): 80 mm, največja hitrost vretena: 7.500 obr/min, TECHNICAL DETAILS Workpiece Length: 200 – 2,500 mm Workpiece Width: 70 – 1,000 mm Workpiece Thickness: 4 – 80 mm Performance and Operation Operating Power: 21 kW Software: WoodWop 4.5 Feed Rates Rapid Traverse X-Axis: 130 m/min Rapid Traverse Y-Axis: 80 m/min Rapid Traverse Z-Axis: 50 m/min Spindle Spindle Speed: 1,500 - 7,500 rpm Compressed Air and Extraction Compressed Air Requirement: 7 bar Dust Extraction: approx. 4,450 m³/h MACHINE DETAILS Dimensions (L x W x H): approx. 7,300 x 3,700 x 2,100 mm Gbjdpjwi Inzefx Af Sok Weight: 5.5 t Operating Hours: 23,983 h Workpiece Counter: 102,199 pieces

Stanje: novo, Leto izdelave: 2026, CNC stroj za vrtanje in vstavljanje moznic za popolnoma avtomatsko vrtanje, lepljenje in vstavljanje moznic. Center za vrtanje in obdelavo moznic s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: Gbsdpfx Aedx Axfjf Sjk • Univerzalni CNC krmiljen stroj za vrtanje in vstavljanje moznic • Nadzor brizganja lepila prek GIC • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatna horizontalna in vertikalna vrtalna vretena • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev strojem za razrez po gnezdenju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Gjdsh E Sghjpfx Af Sobk Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available