Weeke Bht 500 nakup rabljenega (82)

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Dodpfx Aod Nvi Djpleut Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Prodam vertikalni CNC obdelovalni center Weeke Optimat BHX 500, letnik 2007, namenjen za vrtanje, rezkanje in izdelavo utorov v ploščinske materiale v pohištveni industriji. Stroj omogoča hitro in natančno obdelavo elementov ter je primeren za serijsko ali individualno proizvodnjo pohištva. Tehnični podatki: • Model: Weeke Optimat BHX 500 Dusdjywgb Nspfx Aplet • Letnik: 2007 • Tip stroja: 3 osni pretočni CNC obdelovalni center • CNC krmiljenje: WoodWOP (Homag / Weeke) • Maksimalna dolžina obdelovanca: cca 3050 mm • Maksimalna širina obdelovanca: cca 1200 mm • Maksimalna debelina obdelovanca: 80 mm • Minimalna dolžina obdelovanca: cca 200 mm • Minimalna širina obdelovanca: cca 70 mm Oprema: • vrtalna glava z več vertikalnimi in horizontalnimi vreteni • 96 vrtalnih vreten (48 zgoraj, 48 spodaj) • 36 vertikalnih orodij • 12 horizontalnih orodij • žaga za utore • rezkar zgoraj, spodaj • žaga (125mm) vrtljiva za 90° • samodejni kleščni transport obdelovanca Uporaba: • vrtanje za moznike, okovje • rezkanje in utori • obdelava iverala, MDF, HDF, vezanih plošč in masive Prednosti: • možnost obdelave dveh kosov hkrati, kar bistveno poveča produktivnost • hitra priprava in menjava obdelovancev • visoka natančnost vrtanja in rezkanja • idealen za proizvodnjo korpusnega pohištva, kuhinj, omar in notranje opreme Stanje: • stroj je redno vzdrževan in delujoč • možen preizkus ob ogledu Dobava: Junij 2026

Stanje: rabljeno, številka stroja/vozila: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm Number of units: 5 Number of units: 1 Positioning via NC control: yes Duedpfx Asy Nkyaspljt Lateral horizontal groups: yes

Stanje: rabljeno, številka stroja/vozila: 005910, Delovno območje X-os: 2500 mm Delovno območje Y-os: 1300 mm Duedpewuckhsfx Aplst Moč glavnega vretena: 6 kW Število krmiljenih osi: 3 osi Število vrtalnih vretenc: 84

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, največja hitrost vrtenja: 2.970 obr/min, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of lower vertical groups: 5 Number of upper vertical groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of lateral horizontal groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Installed total power: 35 kW Duodpfx Ajyzy T Toplst EQUIPMENT Lateral horizontal groups Group positioning via CNC Z-axis positioning via CNC Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual physical and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6157

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Moving table (workpiece), static working head – horizontal table (workpiece). Control system: PowerControl PC86 powerTouch (woodWOP software). Safety enclosure for the working head. No. 2 workpiece clamps for access to the working area. WEEKE pre-positioning unit for quick positioning of workpieces in the machine with clamping jaws. Support table (workpiece support) at infeed; outfeed table (with powered belt). With automatic panel pusher. Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm). Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (optional 1300) x 80 (2 x 40 mm). Simultaneous processing of up to 2 workpieces (on the Z-axis). Djdsyyvttspfx Apljut Separate switch cabinet and operator console. WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW). WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, številka stroja/vozila: 0-250-11-2614, Funkcionalnost: popolnoma funkcionalen, Spodnja podporna enota za obdelavo Zgornja podporna enota za obdelavo Dolžina obdelovanca: min. 250 – maks. 3000 mm Širina obdelovanca: min. 70 – maks. 1000 mm Dsdpfxoy Ezgis Apleut Debelina obdelovanca: min. 8 mm – maks. 80 mm Zlaganje obdelovancev: maks. 2 kosa Oprema: POSTAJE ZA VSTAVLJANJE MOŽNIKOV x 2 VERTIKALNA VRTALNA ENOTA 2 V 38 HIGH SPEED 7500 HORIZONTALNA VRTALNA ENOTA 2H8X/2 Y REZALNA ENOTA ZA UTORJE N2 X-Y 90 REZKALNA ENOTA F2-ETP- 6 KW KRIMINALNI SISTEM: POWERCONTROL S POWERTOUCH SISTEM ZA BRANJE ČRTNIH KOD FUNKCIJA VARČEVANJA Z ENERGIJO

Stanje: rabljeno, številka stroja/vozila: 008205, Delovno območje os X: 4250 mm Delovno območje os Y: 1320 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 11 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 31 Dsdpfx Apjx A Th Rsljut Število mest za orodja: 22

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Dujdpfex D Nvgox Aplet Ta 3-osni stroj HOMAG WEEKE OPTIMAT BHX 500 je bil izdelan leta 2011. Ponaša se z robustnim CNC obdelovalnim centrom z delovnim območjem 2500 mm x 1300 mm, glavno elektro vreteno ima moč 6 kW, največja debelina obdelovanca pa je 80 mm. Vključuje 84 vrtalnih vreten in dvojni rezkalni vreteni, vsaka z močjo 6 kW pri 18.000 vrtljajih/min. Če želite kakovostne CNC zmogljivosti, razmislite o stroju HOMAG WEEKE OPTIMAT BHX 500, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe CNC obdelava lesa

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 Dodpfx Apjlikvheleut X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: rabljeno, številka stroja/vozila: 008406, Največja širina panela: 1000 mm Največja dolžina panela: 2500 mm Dsdpfx Aoyl Ihxopleut Število injektorjev: 12

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.000 kg, CNC obdelovalni center WEEKE OPTIMAT BHX 500 z vključenim podajalnikom materiala "IgeL-ROBOT" Podpora obdelave spodaj Podpora obdelave zgoraj Dolžina obdelovanca: min. 250 - maks. 2500 mm Širina obdelovanca: min. 70 - maks. 1000 mm Debelina obdelovanca: min. 4 mm – maks. 80 mm Zlaganje obdelovancev: maks. 2 kosa Vektorska hitrost: X-os vpenjalne glave = 138 m/min; Y-os = 80 m/min; Z-os = 50 m/min Oprema zgoraj, spodaj: VERTIKALNA VRTALNA ENOTA 2 V 21 HIGH SPEED 7500 HORIZONTALNA VRTALNA ENOTA 2H4X/2Y Dusdpfx Apjyyb N Helst ENOTA ZA REZANJE UTOROV N2 X-Y 90 REZKALNA ENOTA F2-ETP- 6 KW Čitalec črtne kode proizvajalec: Datalogic

Stanje: rabljeno, številka stroja/vozila: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm Dsdpeiwptujfx Aplout Number of injectors: 14 Positioning via NC control: yes

Stanje: rabljeno, številka stroja/vozila: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm Number of units: 3 Djdpfxeu Rv Uko Aplout

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, številka stroja/vozila: 0-250-12-2554, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 1.000 mm, širina obdelovanca (maks.): 3.000 mm, višina obdelovanca (maks.): 80 mm, model krmilnika: PC 85, DÉTAILS TECHNIQUES Largeur de la pièce min. : 250 mm Largeur de la pièce max. : 3 000 mm Longueur de la pièce min. : 100 mm Longueur de la pièce max. : 1 000 mm Hauteur de la pièce min. : 8 mm Hauteur de la pièce max. : 80 mm Unité de travail verticale supérieure Broche verticale ETP-6 puissance : 6 kW Diamètre de la fraise à rainurer : 125 mm Broches de perçage verticales : 32 (puissance 2,7 kW) Broches de perçage horizontales : 10 (8 en X + 2 en Y) Unité de travail verticale inférieure Broche verticale ETP-6 puissance : 6 kW Diamètre de la fraise à rainurer : 125 mm Duedpjydnu Nofx Aplst Broches de perçage verticales : 32 (puissance 2,7 kW) Broches de perçage horizontales : 10 (8 en X + 2 en Y) DÉTAILS DE LA MACHINE Commande : PC 85 Logiciel : woodWOP 6 ÉQUIPEMENT Cabine de sécurité pour outillage 2 mandrins de serrage pour le blocage et le déplacement de la pièce pendant l'usinage Banc de chargement avec table à coussin d'air Convoyeur à rouleaux motorisé pour l'évacuation des panneaux Possibilité d'usinage simultané de deux panneaux

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Weeke BHX 500 – Operator Side Right Weeke machining centre equipped with one processing support each on the top and bottom Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2500 mm Min. workpiece width: 70 mm Max. workpiece width: 1000 mm Min. workpiece thickness: 8 mm (2*4mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pcs. Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit located in both the upper and lower processing supports, each with 21 individually controllable drilling spindles (with variable speed range). Dodpfxjx S Hzle Apleut 2H4X/1Y Horizontal drilling unit located in both the upper and lower processing supports, each with 10 program-selectable drilling spindles. 8 drilling spindles each: in X-direction 2 drilling spindles each: in Y-direction N2 X-Y 90° Grooving saw aggregate in both the upper and lower processing support for machining in X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL INFORMATION FOR GROOVE SAW BLADE The saw blade width can be 8.4 mm. The chip removal cross section must not exceed 70 mm². F2-ETP-6 KW Milling unit located in both the upper and lower processing support, suitable for shaft-type tools. Manual tool change. Tool clamping: manual, ETP 25 hydro quick-clamp system Rotation direction: right/left Speed: 6,000 – 18,000 rpm, infinitely variable via program Processing up to 3000 mm Infeed table with automatic workpiece feeding and positioning Workpiece unloading zone with cross-belt conveyor and lifting forks – Workpiece length measurement in the machine – Mobile operator terminal – Barcode software incl. scanner

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Duodpfx Ajdz Uk Teplst Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Duedpfxsh Ryhns Aplst Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), stationary operating head – Horizontal table (workpiece) Control unit: PowerControl (woodWOP software) Operator head safety enclosure 2x safety interlock workpiece clamping chucks in the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamp grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) Includes automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) Separate electrical and control cabinet UPPER MACHINING UNITS: 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm Dujdpfx Apjlkdpmolst 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW) LOWER MACHINING UNITS: 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW)

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Minimum working width (mm): 250 Duedevhcbzopfx Aplet No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 Dsdjivawpopfx Apljut No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical drilling unit 2V21 HIGH SPEED 7500 Stroke in Z-direction: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Dedpjyg E R Hjfx Apleut Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle pitch: 32 mm Spindle type: individually controlled Horizontal drilling unit 2H4X/1Y 4 drill spindles each in X-direction 1 drill spindle each in Y-direction Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm from workpiece top edge Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Spindle type: individually controlled Grooving saw unit N2 X-Y 90° Cutting depth: 30 mm Cutting cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling unit F2-ETP-6 KW Tool holder: for shank diameter d = 25 mm Tool diameter: max. 60 mm Tool projection length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool clamping: manual, hydro quick-change system ETP 25 Rotation direction: clockwise/counterclockwise Speed: 6,000 - 18,000 rpm, stepless programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material loading "IgeL-ROBOT" Lower workpiece support Upper workpiece support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader, make: Datalogic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 23.983 h, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, višina obdelovanca (maks.): 80 mm, največja hitrost vretena: 7.500 obr/min, TECHNICAL DETAILS Djdpswi Inzofx Apljut Workpiece Length: 200 – 2,500 mm Workpiece Width: 70 – 1,000 mm Workpiece Thickness: 4 – 80 mm Performance and Operation Operating Power: 21 kW Software: WoodWop 4.5 Feed Rates Rapid Traverse X-Axis: 130 m/min Rapid Traverse Y-Axis: 80 m/min Rapid Traverse Z-Axis: 50 m/min Spindle Spindle Speed: 1,500 - 7,500 rpm Compressed Air and Extraction Compressed Air Requirement: 7 bar Dust Extraction: approx. 4,450 m³/h MACHINE DETAILS Dimensions (L x W x H): approx. 7,300 x 3,700 x 2,100 mm Weight: 5.5 t Operating Hours: 23,983 h Workpiece Counter: 102,199 pieces

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Dujdpfx Aeh E Sghoplet Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0-250-50-2434, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, Ponujamo rabljeno vertikalno obdelovalno središče za obdelavo lesa Weeke BHX 200 optimat, letnik 2016. Dedpfxoy Iy U Ro Apleut Vključno s vračanjem obdelovancev. Če imate kakršnakoli vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.