Vrtljivo Mizo nakup rabljenega (1.428)

Stanje: rabljeno, Dvižna miza z valjčnim transporterjem BARTSCHER Kedpfxoym Smhs Abxjdn Nosilnost 1500 kg Višina dviga 1,80 m

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines that utilize a powerful rotary arm in combination with a reliable pre-stretch system to achieve precise wrapping of pallets. This advanced technology allows the load to remain stationary during the wrapping process. As a result, rotary arm wrappers are particularly suitable for pallets with lightweight or unstable goods, as well as for loads that are difficult to maneuver. Kdsdsr Nc Spspfx Abxsn - Maximum product height: 2,000 mm - Maximum pallet dimensions: 1,200 x 1,200 mm - Minimum weight: 45 kg

Stanje: pripravljen za uporabo (rabljen), A total of 37 table trolleys are available. An on-site inspection is possible. Kedewgnf Ijpfx Abxedn

Leto izdelave: 2024, stanje: novo, Punching force 30 tons or 60 tons Table area 1000x600 mm or 1600x800 mm The electro-hydraulic elevating table punching machine with retractable bridge, type USC, is a machine developed from practical experience over many years. It stands out due to its utmost operational safety and optimal visibility of the punching table when the punching bridge is retracted. In the standard configuration, the punching cycle is initiated via the non-contact safety light curtain or using either of the two hand-operated coarse pushbuttons on the left and right sides of the machine. The stroke and passage of the machine can be continuously adjusted within the mentioned limits via an electronic position measuring system/potentiometer. Off-center loading of the machine is possible thanks to the extremely robust central guide column and the arrangement of the two hydraulic punching cylinders. The modular electro-hydraulic power unit is completely housed at the rear of the machine and is easily accessible for maintenance purposes. Kdjdponfu Nwofx Abxen An automatic central lubrication system supplies all lubrication points in the stand with the required amount of lubricant. The electrical switching devices are housed in a separate control cabinet, which is permanently mounted to the machine. Machine settings are made via a user-friendly interface on the side-mounted touch panel. A freely programmable control system reliably and quickly processes all operations.

Stanje: novo, Število: 102 položaji Teža: 320 kg Stanje: novo Premer luknje: 28 mm Dimenzije D x Š x V: 1,0 x 0,6 x 0,85 m Poseben set, 102-delni, sistem 28 mm Vključno z vozičkom za orodje Material: bruniran kakovostni jeklo Obseg dobave glej slike Kdsdjyv I Hdepfx Abxon

Stanje: novo, Količina: 10 kosov. Obseg vpenjanja: 25 mm. Premer luknje: 28 mm. Teža: 10 kg. Dimenzije (D x Š x V): 0,3 x 0,3 x 0,2 m. 10 hitro vpenjalnih zatičev - sistem lukenj 28 mm - za debelino mize 25 mm. Kdsdpfoyv I Etox Abxon

Stanje: novo, Število pozicij: 93 Teža: 320 kg Stanje: novo Premer luknje: 28 mm Dimenzije (D x Š x V): 1,0 x 0,6 x 0,85 m Poseben set s 93 deli, 28 mm sistem Vključuje voziček za orodje Material: modro-oksidirano kakovostno jeklo Dobava po slikah Kdedpfsyv I Easx Abxon

Stanje: novo, Število: 96 pozicij Teža: 600 kg Stanje: novo Premer luknje: 28 mm Posebni set 31-delni, sistem 28 mm, sestavljen iz: 1x Voziček za orodje 10x Zatiči za vpenjanje 10x Krogelni zaporni zatiči 3x Profesionalna vpenjalka, 300 x 150 mm Ksdpoygxz Sofx Abxodn 3x Profesionalna vpenjalka, 300 x 200 mm 2x Profesionalna cevna vpenjalka 180° 2x Profesionalna cevna vpenjalka 45° Material: brunirano kvalitetno jeklo POZOR!!! Orodje je namenjeno za debelino mizne plošče 25 mm.

Stanje: novo, Clamping range of the chuck: 10 - 200 mm Height: 67.5 mm Bore: 65 mm Outer diameter of chuck: 200 mm Outer diameter of clamping lever: 360 mm Weight: 4 kg Kjdpfsfv Awlex Abxodn Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable rapid workpiece changes. • Low weight and flat design minimize change in center of gravity. The D-D quick-change chuck allows for fast product changes and is ideally suited for frequent component replacement. No separate quick-release key is required, as the levers are integrated into the quick-change chuck.

Stanje: novo, Clamping range of the chuck: 120 - 380 mm Height: 95 mm Kdodpsfv Awtefx Abxen Passage: 170 mm Outer diameter of the chuck: 400 mm Outer diameter of clamping lever: 600 mm Weight: 26 kg Features: - Self-centering. - Reversible jaws. - Fixed clamping levers enable rapid workpiece changes. - Low weight and flat design minimize change in the center of gravity. The D-D quick-change chuck enables fast product changeovers and is ideal for frequent component exchange. No loose quick-release key is required, as the levers are integrated into the quick-change chuck.

Stanje: novo, Clamping range of the chuck: 200 - 500 mm Height: 110 mm Through-hole: 240 mm Outer diameter of chuck: 320 mm Outer diameter of clamping lever: 700 mm Weight: 56 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable fast workpiece changes. • Light weight and low profile cause minimal shift in center of gravity. The D-D quick-action chuck allows for fast product changes and is ideal for frequent component changes. No separate quick-release key is required, as the levers are integrated into the quick-action chuck. Kdjdpfxjfv Awwo Abxjn

Stanje: novo, Clamping range of the chuck: 80 - 280 mm Height: 67.5 mm Bore: 100 mm Chuck outer diameter: 300 mm Clamping lever outer diameter: 480 mm Weight: 13 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers allow for rapid workpiece changes. Kedpfxjfv Awpe Abxodn • Lightweight and low-profile design minimizes shift in center of gravity. The D-D quick-change chuck enables rapid product changeover and is ideally suited for frequent component interchange. No loose quick-change key is required, as the levers are integrated into the quick-change chuck.

Stanje: dober (rabljeno), Podložna plošča za strojni primež, vpenjalna plošča, plošča za primež, vrtljivi krožnik -Vrtljivi krožnik: vrtljiva plošča za primež Kodpfxjykzhve Abxodn -T-utor v krogu: 20 mm, mere glej slike -Prikaz koti -Mere: 350/320/H45 mm -Teža: 20 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Tehnične specifikacije Moč motorja (kW): 4,0 Obrati vretena (obr/min): 1300/2500/3500/5000/6000/8500 Teža stroja (kg): 440 Stranski voziček Dimenzije stroja d x š x v (mm): 1200 x 800 x 1080 Dimenzije mize #### mm: 1200 x 700 Ksdpfx Aoyi U Rzsbxjdn Leto izdelave: 2005

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, NEUPORABLJENO / novo / kot novo Vibracijska miza Napajanje: 400 VOLT 2x asinhronska trifazna vibracijska motorja Z navodili / dokumentacijo! Napravo si je mogoče ogledati v mojem skladišču po predhodnem dogovoru. Pošiljanje in nakladanje sta seveda možna! Kjdpfxovrl Ufs Abxedn

Stanje: rabljeno, Zu verkaufen: Matco A316L prea Palettenwickler mit Drehteller und motorisiertem Vordehnsystem. Solide Maschine in gutem Zustand, vollständig geprüft. Spezifikationen: Drehteller-Palettenwickler Angetriebenes Vordehnsystem Höhensensor Maschine ist überprüft und funktioniert einwandfrei Hinweis: Die Tasten am Display reagieren nicht optimal, aber Start- und Stopptaste funktionieren einwandfrei, sodass die Maschine normal einsetzbar ist. Zusätzliche Informationen: * Sprache: Niederländisch Ksdpfeyuqv Dox Abxodn * Verkauf mit Rechnung * Maschine steht in Harfsen (NL) Optional: * Auffahrrampe * Wickelfolie Haben Sie Fragen oder möchten Sie mehr Informationen? Schreiben Sie uns gerne. Inzahlungnahme möglich: Inzahlungnahme eines (defekten) Palettenwicklers nach Absprache möglich. Schauen Sie sich auch meine anderen Inserate an. Suchworte: Palettenwickler, Folienwickler, Wickelmaschine, Palettenwickelmaschine, Wickelautomat, Roboterwickler, Wickelroboter, Folienwickler.

Stanje: zelo dobro (rabljeno), Universal vice Vice 28536 Brand: Kesel Jaw width: 80 mm Jaw height: 27 mm Opening width: 80 mm Ksdpfx Asuaz R Hobxedn Weight: 11.5 kg

Stanje: dober (rabljeno), Ta polnilni stroj je polnil 3-litrske posode z medom. Po doplačilu ga je mogoče dobaviti tudi s strojem za zapiranje posod GlobeTech, ki je deloval v liniji s tem strojem. Kdedpfxjpfdhpo Abxjn

Stanje: nepreverjeno (rabljeno), Bosch Rexroth Type: SCARA SR6 operator panel defective Bosch Rexroth swivel arm robot Turbo SCARA SR6 with control unit Rated payload: 2 kg Maximum load (bushing diameter 20 mm): 5 kg Maximum load (bushing diameter 25 mm): 8 kg Rated maximum moment of inertia (axis 4): 500 kgcm² Kdodpfx Aovx Taisbxon Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force, continuous/max.: 60/150 N Vertical force, continuous/max.: 200/300 N Torque (axis 4), rated/max.: 5/10 Nm Condition: used Scope of delivery: (see image) (Changes and errors in technical data and specifications are reserved!) If you have any further questions, please feel free to contact us by phone.

Stanje: novo, Number of items: 33 positions Weight: 52 kg Kedpfjfh N Ekex Abxedn Condition: new Hole diameter: 28 mm Set 1: 33-piece, 28 mm system, consisting of: Clamps: 4 x 280610.N Clamps: 2 x 280630.N Prism: 2 x 280648.1.N Bolts: 12 x 160511 Stop: 4 x 280410.N Stop: 4 x 280420.N Angle bracket: 2 x 160110.N Angle bracket: 2 x 280152.N Accessory kit: 1 x 283999 Price indicated is exclusive of packaging and shipping.

Stanje: novo, Number of positions: 37 Hole diameter: 28 mm Condition: new Ksdpsgazl Refx Abxsdn Weight: 29 kg Basic Set 1, 37-piece, 28 mm system, consisting of: Clamps: 4 x 280604 Pins: 8 x 280511 Stop: 6 x 280420.N Angle brackets: 2 x 280110.G Threaded pins: 8 x 280543 Stop: 8 x 160415 Accessory set: 1 x 163999 Price stated is exclusive of packaging and transport.

Stanje: delavnici obnovljeno (rabljeno), - Paul prečna žaga 15 AO - hidravlični hod žage - 150 mm višina reza Kdedsw Slgfopfx Abxen - 500 mm maksimalna širina reza - 1 negnan valjčni transporter dolžine ca. 1.600 mm

Leto izdelave: 1991, stanje: dober (rabljeno), Underslung panel saw, crosscut saw, sliding table saw, mitre saw, panel saw, table saw, circular saw, panel cutting saw - Manufacturer: Altendorf, format sliding table saw type TKR 45 - Main motor: Bauknecht 5.5 kW with brake - Scoring motor: Emod 0.75 kW - Speed: 3000/4000/5000 rpm - Saw blade: Ø 300 mm / max. Ø 350 mm - Max. cutting height: 95 mm at 90° / 70 mm at 45° - Mitre cut: up to 45° Kedpfx Aemydmbobxodn - Cutting width: 2250 mm - Table length: 1400 mm - Overall dimensions: 3480/1530/H1370 mm - Weight: 1104 kg

Stanje: dober (rabljeno), Primež, mizni primež, ključavničarski primež, vpenjalni primež, primež za delovno mizo, vpenjalni primež, namizni primež - Proizvajalec: Bernstein, kroglični primež Spannfix, vrtljiv 360° + nagibljiv 45° - Vpenjalne čeljusti: 45 x 25 mm - Širina vpenjanja: 90 mm Kodpfsx S Rq Rox Abxjdn - Namizna spona: do 82 mm - Transportne dimenzije: 310/10/110 mm - Teža: 1,4 kg

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Large slewing bearing, slewing ring, single-row ball slewing bearing, four-point contact bearing, gear ring, slew ring, -Large slewing bearing -Type: Drawing no. 281.30.1200.013.11.1503 Kodoiqpx Nspfx Abxsdn -Dimensions: see photos -Overall dimensions: Ø 1395 x 90 mm -Transport weight: 240 kg