Vrtljiva rezkalna glava

Panhans 245/200

Stanje: novo, Leto izdelave: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed spindle, tilting to one side, for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment, with zero point reset for height and offset travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Itodpfx Aefpb Nmjl Nsf Push-button for spindle start and stop Clockwise and counter-clockwise rotation Quick-release cutter clamping device Precision-planed grey cast iron table with rigid frame support Control panel mounted below on the rigid frame support Fence 216 with total adjustment via handwheel and LCD display, including cast fence plates and aluminium splitter plates Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved fence 1639 Tapoa Spindle 30 mm, non-interchangeable CE compliant GS tested

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, TERSA nožni valj s 4 noži, motor 5,5 kW, 400 V, 50 Hz, elektronska naprava za zagon in zaviranje. Nastavljanje debelinske mize s tipkami za hitro ali počasno nastavitev, natančnost do 0,1 mm, vgrajen števec delovnih ur, debelinska miza na 4 nosilnih vretenih s štirikratnim vodenjem. Dve podajalni hitrosti: 7 + 14 m/min. Ena gumijasta vhodna in ena gumijasta izhodna valjčka. Dva odsesovalna priključka Ø 160 mm, drsnik za zgornje odsesavanje. Zaščitna naprava za skobljanje SUVAMATIC. Moč motorja 7,5 kW. Krmiljenje pozicioniranja z nadzorom senzorjev vključeno. Isdpfx Aex Ey Tzel Nstf

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Leto izdelave: 1993 Oprema in tehnični podatki: - toga rezkalna vretena; novo ležajenje - z razširitvijo mize z izvlečnim okvirjem dolžine 2500 mm - motor 5,5 kW - Hitrosti: 3000/4500/6000/8000/10000 obr/min - Rezkalni prislon z 2 možnostma nastavitve: - skupni prislon - zadnje sprejemne čeljusti Iedpfxjw I Uine Al Netf - Sesalne kapuce: 2 x 120 mm - Samodejna motorna zavora - Desni/levi tek - s Haffner podajalnikom s 4 valji Teža cca 700 kg Razpoložljivost: po dogovoru Lokacija: Flörsheim

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Delovna širina: 230 mm, delovna višina: 160 mm, število vreten: 5, premer vretena: 50 mm, moč vretena: 4x 5,5kW/2x 11kW, pomik: 24 m/min, dolžina vhodne mize: 3000 mm, aksialni hod vertikalnega vretena: 80 mm, aksialni hod horizontalnega vretena: 45 mm. Priključna moč: 126 kW, potreba po zraku: 8400-9600 m³/h, dimenzije stroja (X/Y/Z): pribl. 3500mm/2000mm/1800mm, teža: pribl. 3500 kg. Vključno z vgradno enoto Weinig EM-11 in ustreznim razdelilnikom za odsesavanje. Dokumentacija na voljo. Možen je ogled na lokaciji. Itsdpou Damdefx Al Nef

Stanje: rabljeno, Weinig Profimat 22 with 4 left mobile units, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Ijdpfxoryb D Sj Al Netf Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).

Stanje: rabljeno, Moč motorja: 5,9 kW Premer vretena: 30 mm Itsdpfx Aoyrhv Nsl Nof Hitrost(i): 3000 / 4500 / 6000 / 9000 vrt/min Nagibni vretenasti rezkar ali mizni rezkar Panhans tip 259 za natančno rezkanje, profiliranje in utorjenje masivnega lesa in lesnih materialov. Stroj je opremljen z nagibnim rezkalnim vretenom, kar omogoča vsestransko obdelavo pod različnimi koti. Idealen za mizarje, izdelavo pohištva in notranje opremljanje. Vključno s podajalnim aparatom Haffner.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/fixed: 90mm/120mm, weight: approx. 3000kg. An on-site inspection is possible. Itsdpowv Umwofx Al Nsf

Stanje: novo, Glazing Bead Stapling Machine "2 P Jumbo Automatic E.C." - New - Your Benefits: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to assign Staple Corner Jointing Machine 2P Iodpfxsvnh T Ne Al Njtf Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, clamping device from above and front Pressure is individually adjustable. Insertion of parallel and overlapping staples possible via electronic control programming. Stapler can be mounted on a suitable work table, operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Jointing Machine 2P with the optional mobile worktable (see details under additional charges) Additional charges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 detachable support rails, 1000 mm long, 2 pivoting and sliding support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 of which with brakes. ----- Surcharge: 1,321.00 Euro net Staples: packages 15 mm staples (package of 2,000 pcs): Price 22.00 Euro 12 mm staples (package of 3,000 pcs): Price 32.00 Euro 10 mm staples (package of 3,000 pcs): Price 32.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no guarantee!)

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Ijdpsu Agh Sefx Al Njtf Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Itsdpfx Alsx D H Hcj Nef Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.