Vodnik Železnici Brusilni Stroj nakup rabljenega (83.501)

Stanje: rabljeno, Leto izdelave: 2003, Grinding diameter 450 mm Grinding length 1500 mm Centre height 225 mm Photos show a nearly identical machine with 1000 mm length Also geometrically overhauled and partially repainted. 1x grinding wheel assembly LEFT 500x80x203.2 mm 1x grinding wheel assembly RIGHT 400x63x127 mm 1x internal grinding device Ø120 mm for 2 high-frequency spindles (motor and HF spindle) Centre height 225 mm Grinding head motor: drive power 9.2 kW B-AXIS: CNC-controlled B-Axis KELCO 120: v constant 35 m/s or 45 m/s_adjustment of grinding spindle speed via control_(standard) Semi-automatic balancing device, ELASO, type EB 500 MFV 1230: high-speed internal grinding spindle with oil-air lubrication High-performance motor spindle M34-FAVY100.R620-20/4, lifetime grease lubrication Balancing arbor Codpfexflcrjx Aa Rjhc Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock Micrometric adjustment at the tailstock Pneumatic relief for the tailstock Tailstock park position Standard workpiece headstock MK5 CNC-controlled C-Axis for standard workpiece headstock Sine bar for direct angle measurement using gauge blocks Large adjustment, swiveling base for standard workpiece headstock Reinforced workpiece headstock MK5 CNC-controlled C-Axis for reinforced workpiece headstock Fixed base for reinforced workpiece headstock Coolant supply through the workpiece spindle Dressing device on the lower table - with 2x 0053.05 and 2x 0053.20, behind the workpiece spindle stock and tailstock Dressing device on the upper table, with Pos. 1x 0053.01, 1x 0053.03, 1x 0053.13 Prepared for later connection of HF dressing device for rotary dressing tools (RENAUD) Adjustment plate for universal use of HF dressing device internal+external KELPOS: active longitudinal positioning MOVOMATIC, GAP: infeed sensor MOVOMATIC KELSET: tool measuring system KELSET, MARPOSS 1900 litre: continuous belt filter, with lifting station, 100 l/min at 2.0 bar, designed for 2 machines Full enclosure Enclosure with inspection doors left and right Electrical interlock for the side door (grinding wheel change) Preparation for customer-side connection of a grinding mist extraction system Cooling unit for water circuit cooling (grinding head and HF spindle) Control cabinet lighting with door switch Data as per delivery note. Data without guarantee.

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), Debelina stekla: 3–19 mm, dimenzije stekla: 140–2000 mm, hitrost: 0,1–10 m/min, instalirana moč: 61 kVA (49 kW, 86,4 A, 400 V), maks. teža stekla: 6170 kg, delovna višina: 920 mm, maks. hitrost odpiranja: 30 m/min, s transfer modulom Bottero TRANSFER 500P, teža: 1 t. Možen ogled na lokaciji. Chsdpfxexg Rhps Aa Rsc

Stanje: zelo dobro (rabljeno), Leto izdelave: 1970, Model: AR 1000 - Leto izdelave: 1970 – 1991, geometrijsko obnovljen - Stanje: dobro do zelo dobro Chsdpfx Ajxfvyzja Roc - Maks. premer brušenja: 250 mm - Dolžina brušenja: 1000 mm - Dolžina potopnega brušenja: 100 mm - Višina med konicama: 180 mm - Koničnik: 60 MK4 - Dimenzije brusnega kola: maks. 500 Ø x 300 Ø x 80 mm - Brusna glava vrtljiva: +/- 45° - Dimenzije: 3,2 x 1,7 x 1,6 m (D׊×V) - Potrebna površina: 4,13 x 2,02 x 1,6 m (D׊×V) - Teža: pribl. 4.300 kg - Obratovalna napetost: 380 V - Moč: 7,5 kW (skupno 11,6 kW)

Stanje: rabljeno, Rabljeni stroj Oprema in tehnični podatki: Chedpfx Aexdpmrja Rsc - Tip: brusilni in polirni stroj, dvostranski - Motor: asinhronski motor, 3-fazni - Napetost: 380 V, 50 Hz - Moč motorja: cca 2,2 kW - Obrati: 2800 obr./min - Brusni/polirni koluti: levo polirni kolut iz tekstila, desno krtačni valj - Priključki za odsesavanje: na obeh straneh, Ø cca 100 mm - Postavitev: masivno litoželezno stojalo, s transportnimi kolesi in pritrdilnimi ušesi - Teža stroja: cca 200 kg Lokacija: Baden-Württemberg Razpoložljivost: takoj

Stanje: rabljeno, Leto izdelave: 1973, Funkcionalnost: popolnoma funkcionalen, Offered for sale is a Henninger ZS 100 center grinding machine. The machine is being sold used. An emergency stop switch was retrofitted. The machine is sold without any warranty. Chodswz Ed Dspfx Aa Rec

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 300 kg, dolžina brušenja: 1.500 mm, premer brušenja: 320 mm, Krožna brusilka TOS BHU 32A/1500, premer brušenja 320 mm, dolžina brušenja 1.500 mm, po naši generalni prenovi v letu 2016, v popolnem tehničnem in optičnem stanju. Cjdpfx Aaoxf Hnij Rohc

Stanje: skoraj kot novo (rabljeno), Maszyna jest wyposażona w wiele dodatkowego osprzętu. Chedpfx Aohvr Hboa Rsc

Stanje: rabljeno, Leto izdelave: 1965, Na voljo sta dva WMW SU 315x3000, priključna moč stroj 1/2: 12,6/12 kW, teža stroj 1/2: 8,2/9 t, potrebna je revizija. Codpfsxg Ihgex Aa Rohc

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Stroj se prodaja kot pokvarjen. Cedpfx Ajxfth Aja Rohc

Stanje: rabljeno, Leto izdelave: 2012, Maximum grinding diameter: 320 mm Grinding length: 1,500 mm Centre height: 160 mm Control: Touch Jones & Shipman Maximum workpiece weight between centres: 100 kg Table: Z-axis travel: 1,645 mm Feed rate: 0.0001 - 12 m/min Swivel range: +5 / -5° X-axis: X-axis travel: 260 mm Feed rate: 0.0001 - 6 m/min Grinding head: Grinding spindle motor: 7.5 kW Cutting speed: 45 m/s Grinding wheel Ø x width x bore: 450 x 50 x 203.2 mm Tailstock: Swivel range: -15 / +90° Speed range: 0 - 660 rpm Codpstqmrpofx Aa Rohc Torque: 27 Nm Mount: MT 3 Total power requirement: kW Machine weight: approx. 8.5 t Space required: approx. 5.5 x 2.5 x 2.0 m Cylindrical grinding machine - External JONES & SHIPMAN - Suprema Easy 1500 E - Spare grinding wheel flange - Multi-grain diamond dresser (for peripheral and side dressing, 10 mm, 1 carat) - Tailstock with micrometer adjustment (max. adjustment travel ±0.05 mm) - Pneumatic quill retraction - Two-jaw steady rest (range 8-75 mm)

Stanje: novo, La DSB 200 D est une puissante affûteuse d'outils de la catégorie des machines à meuler, dotée de diverses fonctionnalités pour l'ébauche, la finition, l'affûtage et l'ébavurage des pièces métalliques et des outils. Cette version industrielle offre un diamètre maximal de meule de 300 mm et dispose d'un moteur de 0,9 kW atteignant une vitesse de 2 950 tr/min. Sa construction robuste en fonte et son moteur sans entretien garantissent une longue durée de vie, tandis que le rotor équilibré et les paliers de qualité assurent un fonctionnement silencieux et d’excellents résultats de meulage. En matière de sécurité, des arrêts d'urgence et des pare-vue sont intégrés. L’équipement standard comprend un bâti, un pare-vue et deux meules universelles en corindon. Faites confiance à la qualité KNUTH et commandez dès maintenant votre affûteuse DSB 200 D. Chsdpfswub Hnex Aa Rjc

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Chjdpfx Asd Ih Dvja Roc Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel: ± 6° Longitudinal travel of table: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle receptacle: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m As a global leader in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer servicing for your machines. Geometrically overhauled and newly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - Digital display on 2 axes. Resolution x-axis 0.5 µm Possible options at extra charge: - Upper table swivel angle display - Rotary encoder with digital readout in workpiece spindle stock - Rotary encoder with digital readout in grinding spindle stock (no height adjustment possible with spindle) - New stable internal grinding device, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. Raising the required minimum protection target must be determined by means of a risk assessment according to BetrSichV.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Machine can be inspected under power. Chodpfewz Emlsx Aa Rsc

Stanje: novo, DSB 250 D je zmogljiv brusilni stroj iz kategorije brusilnih strojev, idealen za grobo in fino brušenje, ostrenje ter odstranjevanje robov iz kovinskih delov in orodja. Ta robusten stroj ima stabilno litoželezno ohišje in brezvzdrževalni motor z močjo 0,9 kW, ki doseže največjo hitrost 2.950 vrt./min. Uravnotežen rotor ter kakovostni ležaji zagotavljajo miren tek in odlične brusilne rezultate. Varnost je na prvem mestu, zato je DSB 250 D opremljen z izklopnim gumbom v sili in zaščitnimi stekli. Priloženo je tudi podnožje ter dva univerzalna korundova brusilna koluta. Visokokakovostne komponente zagotavljajo dolgo življenjsko dobo tega industrijskega modela tudi pri zahtevnih delavniških pogojih. Za natančne in zanesljive rezultate pri obdelavi orodja je DSB 250 D prava izbira. Naročite že danes preko spleta! Cedpfjwub Hhox Aa Rehc

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Table longitudinal travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg including clamping Internal spindle mounting: 80 mm Total power requirement: 6.5 kW Machine weight: approx. 2.9 t Space requirement: approx. 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show an identical 1000 mm model. Includes: -New electrical cabinet -Modern workpiece headstock, model Advance -New workpiece spindle drive -Modern hydraulic unit -Air lift for grinding headstock -Modern internal grinding attachment -Operating tools Extension: Increased upper table swivel range to 10° Optional: -Upper table swivel angle indicator -Workpiece headstock swivel angle indicator -Grinding headstock swivel angle indicator -Splash guard door, Z-axis -Splash guard enclosure, X-axis etc. ADDITIONAL SERVICES: Chedpfx Ajd Ih Dwea Roc -Machine servicing -Expert grinding technology advice -Operator training -Spare parts -Accessories

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.500 kg, Stroj se lahko testira pod napetostjo. Chsdpfsw Idwzox Aa Rec

Stanje: novo, The HFS 60160 F NC is a high-performance conventional surface grinding machine that offers impressive stability and precision for machining large and heavy workpieces. Featuring a robust cross-bed machine frame and a traversing column, it ensures optimal weight distribution across the entire working area. Belonging to the category of conventional surface grinding machines, this model is equipped with a Siemens Smart Line PLC control system, enabling user-friendly operation. Its large working area, combined with a dynamically balanced grinding spindle and a powerful coolant system, guarantees top grinding performance. Both automatic and manual operation modes are supported, making it ideal for prototyping, repairs, and training purposes. Quality and reliability are KNUTH’s priorities—see for yourself and request a quote for the HFS 60160 F NC to meet your precision grinding requirements in the conventional surface grinding machine segment. Chedpfx Aeww T Tlja Roc

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180 ± ° Grinding spindle speed: 1,500; 1,700; 2,200 rpm Incremental feed: 0.001-0.030 mm/Ø per stroke Continuous feed: 0-0.95 mm/Ø Table swivelling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in Kellenberger – Overhaul / Retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your machines, metrically overhauled and newly painted. Version R: The machine is equipped with central lubrication and roller guides on the X-axis flat bed as well as air lift at the grinding headstock. – Digital display on 2 axes. X-axis resolution: 0.5 µm Optional extras available at a surcharge: – Rotary encoder with digital display on the workpiece headstock – Rotary encoder with digital display on the grinding headstock (no height adjustment with spindle possible) – New heavy-duty internal grinding attachment for 80 mm or 100 mm diameter, with height adjustment – Increase in centre height up to max. 225 mm – Variable speed control for grinding spindle Included: – Operating tools – Clamping tube for chuck Codpfx Aaed Ih D Ne Rohc Further accessories available on request. The machine tool does not currently comply with the fundamental safety and protection requirements stipulated in the BetrSichV 2015. A risk assessment according to BetrSichV is required to determine if the minimum necessary protection targets are met.

Stanje: rabljeno, Grinding diameter 250, 350, 450 mm Grinding length 600 mm Centre height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed (per stroke) 0.001–0.030 mm/Ø Continuous feed 0–0.95 mm/Ø Cjdpfx Aasd Ih D Rj Rjhc Table swivelling ±10° Table longitudinal travel 900 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight, cantilevered 130 kg incl. clamping Internal spindle mount 70 mm Total connected load 6.5 kW Machine weight approx. 2.2 t Space requirement approx. 3.1 x 2.0 m Completely overhauled machine according to Kellenberger guidelines - Workpiece spindle drive upgraded with modern three-phase technology - Digital readout on 2 axes. X-axis resolution 0.5 µm Optional features at extra charge: - Encoder with digital readout on the workpiece headstock - Encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operation tools - Clamping tube for chuck Other accessories available on request.

Stanje: rabljeno, Leto izdelave: 1987, Grinding diameter 200 mm Grinding length 400 mm Centre height 100 mm Geometrically overhauled and newly painted Chedjvw Duuepfx Aa Rjc With internal grinding attachment Accessories available upon request

Stanje: rabljeno, Grinding diameter 450 mm Grinding length 1000 mm Centre height 225 mm As a world leader in Kellenberger overhauling/retrofit, we not only deliver machines in as-new condition with warranty, but also provide comprehensive service support for your equipment. The machine is overhauled and delivered in accordance with manufacturer standards. Photos show previously delivered machines with additional options. Mechanical Overhaul: - Complete machine refurbished to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control system - Newly built electrical cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Photos show a previously delivered machine with other options. Grinding head variant UR/RS: - Grinding wheel arrangement for both external and angular plunge grinding – wheels positioned one behind the other! Cjdpfx Ajuwv Hyja Rshc - This enables 400 mm wheel diameter for each position! - Significantly reduces risk of collision - Simplified programming - Grinding wheel specification: 400x63x127 mm per wheel - Provision for HF spindle operation - Spindle optionally available at extra cost - CNC-controlled B-axis for external, face, and internal grinding in a single setup. Swivel range +10°/-270° - Optional C-axis for polygon grinding available at additional cost - Lower part fixed - Grinding head motor 10.0 kW - Tailstock included - Marposs measuring system for grinding wheel measurement - Longitudinal positioning by Marposs

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Required space: approx. 3.6 x 3.5 m As a global leader in Kellenberger overhauls/retrofits, we are able not only to deliver machines in as-new quality with warranty, but also to provide comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - Repainted Electrical overhaul: - New modern CNC cylindrical grinding machine control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical cables, limit switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (on B axis) Standard equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper, optionally with fine adjustment - Grinding spindle head T1 / T2 / T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Optional extras at additional cost: - HF internal grinding spindle - High-precision, maximum rigidity workhead - Measuring control - Extraction unit - Paper band filter Control system: Basic grinding cycles: - Zero-setting workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Touch sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (B axis swivelling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Cjdpeuwv H Tofx Aa Rehc Optional grinding cycles: - Profile plunge grinding, external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single- and multi-thread external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-round grinding, external and internal Price: 15,000

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. New servo motors in X-axis and for the workpiece spindle head. Photo shows a previously delivered machine in standard configuration. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control system, eliminating the need for retraining. - Diagnostic function with display of PLC notifications and the digital I/O - Dressing function can be expanded or modified according to customer requirements. - Optionally, workpiece spindle can be stopped in a defined orientation. - New maximum infeed of 40 mm, expandable upon request. - Digital readout in 2 axes. Resolution in X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece spindle head - Encoder with digital display in the grinding spindle head (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment. - Increase in centre height to a maximum of 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available upon request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic longitudinal table movement and rapid traverse. Versatile application in production for external and internal cylindrical grinding, or combined external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation Cedpeuwv Idjfx Aa Rjhc - Gauging control Please note: The machine tool currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. The required minimum safety level must be determined by means of a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Csdouxft Espfx Aa Rjhc Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: Morse taper 5 (MK5) Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Photo shows identical machine with 225 mm center height Version R: Machine features central lubrication and roller guides in the flat-way X-axis as well as air lift in the grinding headstock. - Two-axis digital readout. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock - Rotary encoder with digital readout in grinding headstock (no height adjustment possible with spindle) - New robust internal grinding device, 80 mm or 100 mm diameter, with height adjustment - Increase of center height up to max. 225 mm - Variable speed control for grinding spindle Includes: Cjdpfed Ih D Hsx Aa Rohc - Operating tools - Clamping tube for chuck Additional accessories available on request. At the present time, the machine tool does not meet the basic safety and protection requirements as defined in BetrSichV 2015. An assessment to determine if the required minimum protection targets are met must be carried out as per the risk assessment under BetrSichV.