Cilindrični brusilni stroj

SCHAUDT RFH 500

Stanje: rabljeno, Krožna brusilka SCHAUDT RFH500 Lodpfoxbt Hkjx Abbjhb

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: Lhjdjqt Dmyspfx Abbjb - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Cylindrical Grinding Machine – External / Manufacturer: WMW / Type: SA 6U x 3000 Year of Overhaul (Retrofit): 2013 (Machine Rebuilder: SerWeMa/Germany) Workpiece Range: Straightening rollers, grinding spindles, general shaft machining. Special Feature: Machining possible with up to 6 steadies. The machine can be inspected under power by appointment. TECHNICAL DATA: Working Area: - Centre height: 260 mm - Maximum swing diameter: 515 mm - Maximum grinding length: 3,000 mm - Maximum grinding diameter: 515 mm - Maximum workpiece weight: 500 kg Workpiece Headstock: - Infinitely variable speed: 12.5 – 355 rpm - Centre taper: Morse No. 5 Tailstock: - Maximum quill stroke: 40 mm - Centre taper: Morse No. 5 Grinding Spindle Head: - Grinding wheel: * Maximum external diameter: 630 mm * Maximum width: 125 mm EQUIPMENT: - Dust extraction - Documentation Lsdpfxexymdaj Abbshb - CE marking No guarantee for completeness and correctness of the technical information and equipment details. – Subject to prior sale – A detailed technical datasheet and information on equipment are available on request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment Lhjdpfx Abourw Uyobjb

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Lsdpfxot Hwzis Abbohb Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: novo, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machinery category, distinguished by its robust construction and long, supportive guideways. Its heavy-duty machine base made from high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate precise infeed adjustments. This equipment is complemented by a standard position display with linear scales, enabling easy monitoring of actual values. Versatile applications such as internal and external cylindrical grinding as well as taper grinding are supported by the hydraulically adjustable workhead. Buyers receive extensive standard accessories, including an internal grinding device and a work lamp. Experience outstanding performance and precision with the RSM 500 A – contact us now to optimize your grinding projects! Lodpfx Abjncdx Nebshb

Stanje: dober (rabljeno), Wheel diameter – max. 180 mm Wheel width 58 mm Module – max. 4 Module – min. 0.5 Strokes per minute 200 – 710 Lhjdsuayw Sjpfx Abbob Total power requirement 3 kW Machine weight approx. 3 t Good condition, change gears, etc. Year of manufacture approx. 1964

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Lhjdorz Nflopfx Abbjb Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Lhedpfxevzhf Sj Abbob Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: rabljeno, Širina materiala: 300 mm Teža koluta: 3 t Debelina materiala: 2 - 4 mm Ravnalko, 7 valjev, proizvajalec Schleicher, tip RM 6-95/160 Širina traku: 300 mm Debelina traku: 2 - 4 mm Ravnalni presek: 1200 mm² Napetost: 220/380 V 50 Hz Moč: 3,1 kW Lhsdecdrmmepfx Abbeb Razvijalec s pritiskalnim valjem, proizvajalec Schleicher, tip H-3 Maksimalna obremenitev: 3 t Širina traku: 400 mm Napetost: 220/380 V 50 Hz Moč: 3,92 kW Brez krmiljenja