Vks nakup rabljenega (94)

Stanje: rabljeno, Leto izdelave: 2010, Saw blade diameter: 315 mm Saw blade dimensions: 350 x 40 x 2.5 mm Cutting diameter: 90 mm Cutting capacity at 90° (flat): 150 x 90 mm Cutting capacity at 45° (round, left & right): 90 mm Cutting capacity at 45° (flat, left & right): 105 x 90 mm Cutting capacity at 60° (round): 90 mm Cutting capacity at 60° (flat): 75 x 70 mm Cutting speed: 33 / 66 m/min Total power requirement: 1.8 kW Machine weight: approx. 340 kg Space requirement: approx. 900 x 800 x 1700 mm Equipment: - with mitre adjustment 60° left / 45° right - Coolant system - 2 speeds - Saw blade - Machine base - Operating manual Itsdpfov Td Hvex Ah Dsn

Stanje: dober (rabljeno), Leto izdelave: 2011, From company liquidation: Berg und Schmid VKS 370 HA Year of manufacture: 2011 Isdpfx Ahjwa Ecqj Dstn Semi-automatic 4-meter roller conveyors on both left and right sides Left side stop with digital length measuring system, adjustable via handwheel Cutting capacities with 370mm saw blade: Round: 120mm – Square: 100mm – Rectangle: 180x100mm at 90° At 60°: Round: 110mm – Square: 90mm – Rectangle: 90x100mm Mitre cuts: left up to 60°, right up to 45° Saw blade mount: 40mm Saw blade speed: 15-70 rpm 380 Volts Coolant pump Semi-automatic operation: 1. Clamp material 2. Start saw 3. Lower frame in rapid feed mode to material start, or for series cuts begin cutting immediately 4. Stop saw band 5. Raise frame just above the material 6. Release the vise

Stanje: zelo dobro (rabljeno), Sägeblattdurchmesser 350 mm Isdpfx Asiqy Abjh Dotn

Stanje: rabljeno, Technical Details: Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 110 mm Cutting capacity at 90 degrees, square: 85 x 85 mm Cutting capacity at 90 degrees, flat: 180 x 85 mm Cutting capacity at 45 degrees, round: left/right: 105 / 110 mm Cutting capacity at 45 degrees, square: left/right: 85 x 85 / 85 x 85 mm Cutting capacity at 45 degrees, flat: left/right: 130 x 85 / 130 x 85 mm Saw blade bore: 40 mm Speed range – stepless: 9 / 18 / 36 / 74 / 4-step rpm Rotary table: Ø 400 mm/min Table swiveling +/-: 60° right and 45° left Compressed air connection: 7 bar Total power requirement: approx. 2.2 kW Machine weight approx.: 430 kg Machine dimensions: W: 0.7 x D: 1.01 x H: 2.1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw, which allows mitre cuts up to 45° to the left and 60° to the right on profiles and solid materials. Vertical circular saw Robust, heavy cast construction Max. vice opening: 180 mm Cut counter Vertical travel of saw head: 200 mm Vice opening width max.: 180 mm (jaw size W: 220 x H: 70 mm) Operation via control panel Isdpfx Ahsu Nilyo Djtn

Stanje: rabljeno, številka stroja/vozila: 007666, Maks. obdelovalna širina: 2500 mm Maks. obdelovalna dolžina: 3500 mm Itodeu H R Hgjpfx Ah Den

Stanje: rabljeno, številka stroja/vozila: 007516, Maximum working width: 2400 mm Iodpowuz D Tofx Ah Detn

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Znamka: HSM Tip: VK 20/1200 Isdoxnzf Ispfx Ah Dotn Motor: 11 kW Končna velikost bale: 700 x 800 mm Teža bale: 200–350 kg

Stanje: rabljeno, Leto izdelave: 2000, Debarking plant type VK 32 !! Sale on behalf of customer !! Itedpfx Ahewwlado Don

Stanje: rabljeno, Rabljena linija za punjenje KRONES za negaziranu, gaziranu vodu i CSD, kapaciteta 12.000 boca/h Ova rabljena linija za punjenje KRONES za negaziranu i gaziranu vodu te gazirane bezalkoholne napitke (CSD) omogućuje visokoučinkovito punjenje mineralne vode, gazirane vode i bezalkoholnih gaziranih pića. Namijenjena je obradi PET ambalaže u formatu 1,5 l, primjenjujući izobaričnu tehnologiju punjenja radi očuvanja kvalitete gaziranih i negaziranih napitaka. Standard grla boce je PCO 1810. Osim toga, ova rabljena linija KRONES – 12.000 boca/h integrira sinkronizirane strojeve, optimizirajući svaki korak proizvodnje od ubacivanja preformi do konačnog pakiranja i paletizacije. Ubacivanje i priprema preformi na liniji KRONES Proces započinje automatskim ulagačem preformi koji kontinuirano dovodi preforme do invertera preformi. Time se osigurava neprekinut i pravilan tijek s ispravnim poravnanjem preformi prije procesa puhanja. Stroj za puhanje boca Sljedeći korak uključuje stroj za puhanje boca Krones Contiform Compact 10, godina 2001., s upravljanjem Siemens S5. Stroj precizno zagrijava i oblikuje preforme u PET boce, spremne za sljedeće proizvodne faze. Zračni transporteri KRONES za negaziranu i gaziranu vodu Nakon puhanja, boce se prenose zračnim transporterima Krones AirCo (model AirCo, godina 2011), ukupne duljine oko 110 metara. Transporteri su upravljani inverterima i Siemens S5 kontrolerom, čime se osigurava pouzdan prijenos boca do sljedeće stanice. Miješalica i karbonizacijska jedinica Prije punjenja, proizvod prolazi kroz miješalicu i karbonizacijsku jedinicu Krones MS, godina 1992. Sustav miješa vodu i sirup, zatim karbonizira napitak pomoću CO₂ za gazirane proizvode ili injektira dušik za negaziranu vodu. Ova jedinica omogućuje kontinuirani rad i miješanje, osiguravajući dosljednu kvalitetu proizvoda u cijeloj proizvodnji. Punilica u monobloku Nakon miješalice slijedi punilica u monobloku Krones VK PET 100 SV K, godina 1993., pod upravljanjem Schleicher sustava, koja uključuje: • Jedinicu za ispiranje boca • Izobaričnu punilicu, prikladnu za negazirane i gazirane napitke • Zatvarač za PET boce sa grlom PCO 1810 • CIP priključke za automatsko čišćenje • Obradu formata 1,5 l Ova jedinica čini srce linije, izvodeći ključne funkcije unutar kompaktne i usklađene cjeline. Stroj za etiketiranje Ijdpfswa Tqcjx Ah Dotn Nakon punjenja, stroj za etiketiranje Krones Canmatic, godina 1997, automatski nanosi etikete na PET boce, osiguravajući precizno pozicioniranje i visok kapacitet, za profesionalno finalno pakiranje. Stroj za omatanje u skupljajuću foliju Nakon etiketiranja, omotač Dimac Green Star Big, godina 2011, formira višepakiranja koristeći skupljajuću foliju.

Stanje: novo, Workbench with steel sheet shelf and 10-year manufacturer's warranty* Made in Germany - Beech multiplex worktop 750 x 700 x 40 mm, without backboard - Frame made of square tubing 40/40/2 mm - Steel sheet shelf, 600 mm deep - Feet with plastic adjustable gliders - Surface load with evenly distributed weight: 1000 kg Iedpfx Ahjubxxqs Detn - Standard workbench – 750 x 700 x 840 mm (L x W x H) - Ergo version – 750 x 700 x 900 mm (L x W x H) Available in 7 different body colours: - Anthracite Grey - Gentian Blue - Flame Red - Sky Blue - Light Blue - Light Grey - Pure Orange - Reseda Green - Signal Blue - Jet Black * 10-year manufacturer's warranty. Wear parts excluded. This item is delivered to curbside free of charge. Standard delivery time is 5 working days. Free shipping within Germany, excluding islands.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna širina: 2.583 mm, skupna višina: 3.994 mm, skupna dolžina: 6.661 mm, vhodna napetost: 400 V, skupna masa: 12.000 kg, kapaciteta rezervoarja za olje: 300 l, HSM VK 4812 P Year of manufacture: 2015 Fully automatic baler. The machine has undergone service and maintenance by an authorized HSM Service Center based in Germany. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Iedjxhd Rtopfx Ah Djtn Overall length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Processed materials: film, mixed paper, cardboard, punching waste Bale tying: 4-fold wire binding We also have other balers in stock. Transport costs depend on weight, volume, and especially distance. For inquiries, the following information is required: delivery address (postal code and city). For further details, a telephone conversation is necessary. Therefore, please inquire about transport costs and other shipping options by contacting us by phone. Our contact details can be found in the seller’s legal notice. We sell and export worldwide and, thanks to our very large storage capacity, can supply large quantities quickly and flexibly. We issue intra-community invoices – VAT-free. Business hours: Mon-Fri: 8:00 am–4:00 pm Sat: closed

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table Iedpou Hmacefx Ah Dotn drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit non-driven outfeed table machine workshop inspected machine cleaned and newly painted

Stanje: pripravljen za uporabo (rabljen), Baler HSM VK 42/1200 fully automatic Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Itodpfx Ahjra Nrxo Dsn Press length: approx. 7 meters Press weight: approx. 6,000 kg Tying: 4x automatic wire tying

Stanje: rabljeno, konfiguracija osi: 3 osi, medosna razdalja: 9.110 mm, prva registracija: 04/2009, vzmetenje: zrak, barva: drugo, Leto izdelave: 2009, Oprema: ABS, = Dodatne možnosti in oprema = - BPW osi - Dvižna os - Zračno vzmetenje = Dodatne informacije = Iedpexl R Nwefx Ah Detn Zavore: bobnaste zavore Zadnja os 1: Največja dovoljena obremenitev: 9.000 kg Zadnja os 2: Največja dovoljena obremenitev: 9.000 kg Zadnja os 3: Največja dovoljena obremenitev: 9.000 kg Lastna masa: 6.540 kg Nosilnost: 38.460 kg Skupna dovoljena masa: 45.000 kg Mere (D x Š): 1.380 x 255 cm Registrska številka: OK-26-VK

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-201-06-9022, največja hitrost vrtenja: 24.000 obr/min, razdalja med vreteni: 32 mm, delovna višina: 950 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece length Single clamping: max. 4,000 mm Pendulum operation: max. 1,375 mm Workpiece length for milling operations with 25 mm tool diameter Single clamping: max. 4,175 mm Double clamping: max. 1,950 mm Pendulum operation: max. 1,550 mm Workpiece width, front stop (operator side) Iedpfsw Upu Sjx Ah Djtn Milling operation with 25 mm tool diameter: max. 1,220 mm All units (except boring head): max. 1,150 mm Workpiece width, rear stop Milling operation with 25 mm tool diameter: max. 1,730 mm All units: max. 1,600 mm Optional console extension, item no. 7375 Workpiece thickness Including clamping devices: max. 300 mm With standard clamp, unrestricted: up to max. 60 mm Please note: Dimensions are not equal to max. possible machining sizes per unit – see separate tables Minimum workpiece size: Dependent on clamping devices, workpiece surface and contour Working height Lower edge of workpiece: 950 mm Main spindle Power S6: 18.5 kW Power S1: 14.5 kW Tool holder: HSK F63 - DIN 69893 Tool weight: max. 6 kg including holder Tool length: max. 200 mm (measured from underside of motor spindle) Tool diameter, milling tools: max. 180 mm Tool diameter, grinding tools: max. 200 mm Speed range: 0 - 18,000 rpm Full torque: 0 - 12,000 rpm Full rated power: from 12,000 rpm Max. speed: 24,000 rpm Disc tool changer Capacity: 18 positions Tool holder: HSK F63 Setup option 1: 18 x max. 130 mm diameter Setup option 2: 9 x max. 180 mm diameter and 9 x max. 70 mm diameter Drilling head Spindles: 17 Motor power: 4 kW, frequency controlled Speed range: 4,500 - 6,000 rpm Function: vertical drilling Extension stroke: 50 mm Drill spindles: up to max. 35 mm drilling diameter Spindles X-direction: 11 Spindles Y-direction: 7 Spindle distance: 32 mm Overall drill length: 70 mm Shank diameter: 10 x 20 mm Rotation: Alternating left/right MACHINE DETAILS Installation dimensions: 5,000 x 7,750 x 3,000 mm EQUIPMENT 2x vacuum cups per console Note: Unless explicitly stated otherwise, tools, tool holders, units, and mechanical clamping devices that may be visible in photos and videos are not included in the scope of delivery.

Stanje: rabljeno, prevoženi kilometri: 347.500 km, moč: 240 kW (326,31 KM), prva registracija: 03/2016, skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 11/2025, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, * · · · Dear interested parties, you are welcome to contact us via WhatsApp: ???. For inquiries from outside Germany, please use the international phone number: · ? 6569??. We look forward to your message. * Mercedes Antos 2533 6x2 * HS side loader * SL- VK- F * Euro 6 * Telligent automatic transmission * Automatic climate control * Suspension: leaf - air - air * ABS * Lift axle * Steering axle * Beacons * Toolbox Isdexduhzspfx Ah Detn * AdBlue * Air seat * Differential lock * Bluetooth * Multifunction steering wheel * Radio CD * Reversing camera * Electric windows, electric mirrors * Tires 315/80R22.5 approx. 60/70/30% * German vehicle * 1st owner * Net sales within the EU only with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), * Sale only to businesses, transport to port possible, * This offer is non-binding and subject to change. * Errors and interim sales excepted. No liability for input errors. * Viewings by appointment only. * WhatsApp 00496569

Stanje: dober (rabljeno), Leto izdelave: 2012, obratovalne ure: 12.078 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 30.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 98 kW (133,24 KM), volumenski pretok: 643 m³/h, Technical Data Press: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of manufacture: 2012 Total operating hours: 12,078 hours (as of September 2025) Pump operating hours: 6,616 hours (effective pump runtime) Number of bales pressed: 65,792 bales (as of September 2025) Main press force: 880 kN Specific pressure: 120 N/cm² Cutter edge pressure relief force: 120 kN Feed hopper dimensions: 970 x 1,800 mm Theoretical cycle time (idling): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 98 kW Isdpfsxcngnjx Ah Detn Total current consumption: 192 A Fuse protection: 250 A slow-acting Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/h Bulk density of 50 kg/m³: 32.15 t/h Bale weights at approx. 1.2 m bale length: 650 up to 750 kg per bale, material dependent Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor): 18,000 x 22,000 x 5,765 mm (L x W x H) Press weight approx. 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: - Access lock with key transfer system - Electro-hydraulic interlock of the press carriage during tying operation, to prevent press ram movement with highly expansive materials Additionally ordered special equipment: - Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motorization, at equivalent output - Manual activation/deactivation of the number of tying wires, to save strapping wire with non-expansive materials - Cutter edge relief with 121 kN press force - Wire monitoring by sensors, including press shutdown in the event of wire break or end of wire - Bale slide - Visual warning signal mounted on the control cabinet Condition of the press: The complete baling system (baler and conveyor system) is in good, ready-to-use condition. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2012 Drive power: 7.5 kW Conveyor speed: 0.05 – 0.4 m/sec Feeder belt length: 6,000 mm Feeder belt side wall height: 400 mm Incline belt length: 9,000 mm Incline belt side wall height: 800 mm Gooseneck length: 1,500 mm Incline: 30° Nominal belt width: 1,800 mm Usable belt width: 1,700 mm Belt quality: EP-500/4 Steel cleats on rubber belt: 50 x 50 mm Hollow pin chain, pitch: 125 mm, rollers: 36 mm Drive shaft height above ground: 4,284 mm Total conveyor height: 5,765 mm Transport dimensions feeder belt: approx. 7,000 x 2,200 x 1,250 mm (L x W x H) Transport dimensions incline belt: 13,000 x 2,500 x 2,900 mm (L x W x H) Pit dimensions for conveyor: 14,765 x 3,260 x 1,250 (L x W x H) Scope of delivery: For sale: the feed conveyor, the baler with bale slide, and the wire feed stations, but without wire. Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection possible by prior arrangement. We assume no liability for technical data or possible errors.

Stanje: dober (rabljeno), prevoženi kilometri: 120.976 km, moč: 120 kW (163,15 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, konfiguracija osi: 4x2, medosna razdalja: 4.330 mm, prva registracija: 08/2014, dolžina tovornega prostora: 4.260 mm, širina tovornega prostora: 2.170 mm, višina nakladalnega prostora: 2.180 mm, emisijski razred: Euro 5, barva: drugo, voznikova kabina: dnevna kabina, vzmetenje: jeklo, velikost pnevmatike: 195/75R16, število sedežev: 3, Leto izdelave: 2014, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, nadzor oprijema, = Additional Options and Accessories = - Electric windows - None - Tail lift - Central locking = Notes = Configuration: 4x2, twin rear wheels, payload: 1,469 kg, unladen weight: 2,031 kg, gross weight: 3,500 kg, unbraked towing capacity: 750 kg, braked central axle towing capacity: 2,000 kg, cab type: single cab, air conditioning, number of airbags: 1, parking assistance: none, electric windows, radio/cassette, colour: multicoloured, lighting type: halogen lamp, Bluetooth, engine output: 120 kW (161 hp), fuel: diesel, Euro: 5, drive technology: timing chain, transmission type: manual gearbox, gears: 6, power steering, ABS, ASR (traction control), starter battery, roof rack: none, rear closure: tail lift, central locking, seating capacity: 3, seat configuration: 1+2, manual seat adjustment, tail lift, tail lift type: rear flap, tail lift capacity: 1,000 kg, tail lift manufacturer: Dhollandia dhlm.10, tail lift material: steel and aluminium, tail lift dimensions: 160x209 cm, battery for access ramp, air conditioning, spare wheel, tyre type: all-season tyres = Further Information = Transmission Transmission: 6 gears, manual gearbox Axle Configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: leaf spring Axle 1: left tyre tread: 5 mm; right tyre tread: 4 mm Axle 2: twin tyres; left inner tyre tread: 6 mm; left outer: 8 mm; right inner: 8 mm; right outer: 4 mm Dimensions Dimensions (L x W x H): 705 x 221 x 316 cm Itsdjw A Hpqopfx Ah Djn Weights Kerb weight: 2,031 kg Payload: 1,469 kg gross vehicle weight: 3,500 kg Functional Tail lift: Dhollandia dhlm.10, rear flap, 1,000 kg Load platform height: 90 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Identification Registration number: VK-681-X

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 07/2017, vzmetenje: zrak, barva: modra, Leto izdelave: 2017, Axle configuration Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Rear axle 4: Max. axle load: 9,000 kg Dimensions Height: 154 cm Weights Unladen weight: 6,358 kg Payload: 37,642 kg Gross vehicle weight (GVW): 44,000 kg Condition Isdpfowzw Alox Ah Detn Technical condition: good Visual condition: good Identification Registration number: OV-84-VK Further information Please contact Arie for more information.

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 16.304 h, Balinirni stiskalnica HSM VK 4012, letnik 2005 - V prihodu Proizvajalec: HSM Tip: VK 4012 Letnik: 2005 Obratovalne ure: 16.304 Pritisna sila: 45 t Pogonska moč: 15 kW Polnilna odprtina: 820 x 1250 mm (ŠxD) Kapaciteta: 50 kg/m³: 8,7 t/h Isdpfxew Tilns Ah Djtn Velikost bala: 900 x 720 x 600-1200 mm Teža bala: 250-400 kg Vezava: trojna, avtomatska Transportne mere: ca. 7.200 x 2.300 x 2.400 mm (DxŠxV) Teža: ca. 8.000 kg Materiali: papir, karton, folija

Stanje: generalkompletno obnovljen (rabljeno), Oluščevalnik lubja Valon Kone VK - 450 2RE Iedpfx Ajxhdtzjh Dstn Oluščevalnik z dovodnim transporterjem, za hlode do premera 450 mm, z rotorjem za redukcijo in oluščevalnim rotorjem. Oluščevalni rotor je nov. Stroj je bil generalno obnovljen.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, moč: 90 kW (122,37 KM), This is a 90 kW fan/blower, year of manufacture 2008. Completely overhauled and ready for operation. Asking price: €8,000 net. Itjdpfx Aerp Dlwjh Djn

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), lastna masa: 12.000 kg, volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours, as of August 2025 Pressing Force (Main Press): 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput Rate: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Capacity at a Bulk Density of: - 20 kg/m³: up to 6 t/hour, depending on material - 50 kg/m³: up to 13 t/hour, depending on material Bale Weights: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Operator Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Type: HVI 46 Machine Installation Dimensions (with bale chute): 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (baler only): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (baler): approx. 12 t Itodpfx Aovtpq Heh Don Scope of Supply: - HSM VK 4812 channel baler, without hydraulic oil, without conveyor equipment - Two wire reel boxes for 8 x 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and potential-free contacts for external control. Operation from the control cabinet is on the left in pressing direction; the needle unit is on the right side and can be folded back for transport. The machine has been partially overhauled and tested in our workshop – please see the photos. Documentation (operating instructions, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment. No liability for technical specifications or possible errors.

Stanje: dober (rabljeno), prevoženi kilometri: 165.315 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 4x2, medosna razdalja: 3.670 mm, prva registracija: 09/2014, dolžina tovornega prostora: 3.320 mm, širina tovornega prostora: 1.780 mm, višina nakladalnega prostora: 1.790 mm, emisijski razred: Euro 6, barva: srebrn, voznikova kabina: dnevna kabina, vzmetenje: jeklo, velikost pnevmatike: 235/65R16, število sedežev: 2, Leto izdelave: 2014, Oprema: ABS, klimatska naprava, nadzor oprijema, spojka prikolice, tempomat, = Further Options and Accessories = - Electric window lifters - Electric mirrors - None - Partition wall - Central locking = Notes = Configuration: 4x2, Payload: 924 kg, Curb weight: 2,276 kg, Gross weight: 3,200 kg, Trailer load, unbraked: 750 kg, Tandem axle trailer load, braked: 2,800 kg, Tow bar, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assist: None, Electric window lifters, Electric mirrors, Partition wall, Radio/cassette, Colour: Silver, Metallic, Lighting type: Halogen lamp, Speed limiter, Seat heating, Bluetooth, Engine output: 140 kW (188 hp), Fuel type: Diesel, Emissions standard: Euro 6, Drive system: Timing chain, Transmission type: Automatic, Speed limiter, Power steering, ABS, ASR (traction control), Starter battery, Body type: Raised, additionally extended, Roof rack: None, Side doors: 1, Rear door type: Double door, Central locking, Seating: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, V6 3.0 ltr AC automatic EURO6 Bluetooth cruise control heated seats, Spare wheel, Tire type: Winter tires = Further Information = Iodpsw S A Tijfx Ah Dstn General Information Number of doors: 1 License plate: VK-823-H Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf springs Axle 1: Tire tread left: 7 mm; Tire tread right: 7 mm Axle 2: Tire tread left: 6 mm; Tire tread right: 5 mm Dimensions Dimensions (L x W x H): 608 x 202 x 235 cm Weights Curb weight: 2,276 kg Payload: 924 kg Gross vehicle weight: 3,200 kg Functional Loading platform height: 71 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 19.750 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, kapaciteta rezervoarja za olje: 2.000 l, lastna masa: 33.000 kg, volumenski pretok: 643 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of Manufacture: 2015 Operating Hours: 19,750 hours (as of July 2025) Number of Bales Produced: 24,760 bales (as of July 2025) Main Press Force: 1,000 kN Specific Press Force: 120 N/cm² Shear Edge Ejector Force: 121 kN Insertion Chute Dimensions: 970 x 1,800 mm Theoretical Cycle Time (idle): 8.3 seconds Theoretical Throughput: 643 m³/hour Bale Dimensions: 1,100 x 750 mm; length variable from 600 to 2,000 mm Drive Power: 2 x 45 kW, frequency-controlled Connected Load: 110 kW Total Power Consumption: 213 A Fuse Protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput Rates for a Itsdpfexb Dvvjx Ah Djn Bulk Density of 20 kg/m³: 12.86 t/hour Bulk Density of 50 kg/m³: 32.15 t/hour Bale Weights (at approx. 1.2 m bale length): 650 to 750 kg/bale, depending on material Hydraulic Oil Tank Volume: 2,000 L HVI 46 PLC Control: Siemens S7-300 Control Panel: Siemens TP 700 Baler Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation Dimensions with Conveyor Technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of Baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special Machine Features: - Access interlock via key transfer system - Electro-hydraulic locking of the press carriage during tying, ensuring the press ram does not shift with highly expansive materials Additional Optional Equipment Ordered: - Frequency-controlled main drive 2 x 45 kW, offering up to 40% energy savings compared to standard 2 x 45 kW motorization, with the same performance output - Manual selection/deselection of wire tying for non-expansive materials, saving tying wire - Shear-edge ejector with 121 kN pressing force - Sensor-based wire monitoring with automatic press shutdown on wire break or end - Bale chute - Visual warning signal mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, operational condition, regularly cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Model: Chain Belt Conveyor KF 1800 Year of Manufacture: 2015 Belt Speed: 0.36 m/s Input Belt Length: 7,000 mm Inclined Belt Length: 14,500 mm Gooseneck Length: 1,550 mm Incline Angle: 30° Nominal Width: 1,800 mm Usable Width: 1,638 mm Overall Conveyor Height: 7,745 mm Pit Dimensions for Conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: For sale are the input conveyor, the transverse distributor belt, and the baler—including bale chute, but without wire pulling stations and without wire. Notes: The full documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or potential errors.