Turbex 2000 nakup rabljenega (7.726)

Stanje: rabljeno, Leto izdelave: 2000, skupna masa: 60 kg, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Nodpfxsx Iwc Ej Ah Iowd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 29.688 h, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D-SL, skupna višina: 1.350 mm, skupna masa: 110 kg, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 60.000 W, število osi: 4, This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It is equipped with a single spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers an X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse rates of 75 m/min. Take advantage of this opportunity and purchase this CHIRON Mill 2000 High Dynamics vertical machining center. Contact us for further information about this machine. Additional Equipment • Rated pressure: 200 bar • Test pressure: 260 bar • Temperature range: -10 to 120 °C • Bypass opening pressure: 7 bar • Differential pressure indicator: 5 bar • Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V • Maximum switching current: 1 A • Switching capacity: 70 W • Protection class: IP 65 • Weight: 37 kg • Lubrication: Oil-air • Maximum oil tank temperature for hydraulic fluid: 55°C Machine Benefits Technical Advantages of the Machine Nodpfx Asx D Dr Aeh Ijwd • Main spindle max. torque: 75 Nm • Spindle head version: single spindle Additional Information No swiveling spindle head. Cooling device for control unit: Dimensions: 400 mm (W) x 950 mm (H) x 260 mm (D) Set flow rate: 40 l/min; Outlet pressure at 50 Hz: 4.0 bar; Rated power: 1.5 kW; Max rated current: 4.1 A Unit: Dimensions: 600 mm (L) x 600 mm (W) x 1350 mm (H); Weight: 110 kg; Rated connected load: 4.60 kW; Max rated current: 9.20 A; Maximum fuse protection: 16 A Table rotary table: Transport load without counter bearing: 300 kg; Max. axial load: 9000 N; Max. radial load: 40000 N; Max. tilting moment: 2000 Nm; Max. transferable torque from worm to worm gearbox: 30 Nm Counter bearing: Transport load for vertical use with NC rotary table 1.03: 600 kg; Required clamping pressure of the hydraulic fixture (rated pressure): 75 bar; Permissible clamping pressure of the hydraulic clamp: 85 bar; Permissible peak pressure of the hydraulic clamp: 120 bar; Permissible tangential moment with hydraulic clamp: 1000 Nm Dimensions Machine depth: 600 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, skupna masa: 4.400 kg, število osi: 3, This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a swing diameter over bed of 630 mm and over carriage of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm in 18 steps. Total power requirement is 15.0 kW, and the machine comes equipped with several steady rests and face plates. If you are looking for a high-quality lathe, you should consider the NILES DLZ 630 V x 2000 we have on offer. Contact us for further details. Nodsx Imrcopfx Ah Ijwd • Swing diameter over bed: 630 mm • Swing diameter over carriage: 340 mm • Turning length: 2000 mm • Centre height: 290 mm • Clearance: 70 mm • Spindle speed range: 22.5–1120 rpm (18 steps) • Longitudinal feed: 0.036–2.5 mm/rev • Cross feed: 0.018–1.25 mm/rev • Total power requirement: 15.0 kW • Transport dimensions (LxWxH): 5.0 x 1.35 x 1.5 m • Tailstock taper: MT5 Additional equipment: • 400 mm tapered bar chuck • 1 face plate, D=630 mm • 2 cross-slot face plates • 2 large steady rests (340 mm capacity) • 2 medium steady rests • 1 travelling steady rest • Heidenhain digital readout (DRO) • Various tool holders • Tool cabinet with tool holders • Steady rest box

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 63.929 h, vpenjalna sila: 2.000 kN, proizvajalec krmilnikov: ENGEL, model krmilnika: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in the year 2000. It features a clamping force of 2000 kN, a tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection moulding machine, consider the Engel ES650H/200W-200HL-2F that we are offering for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping Unit: • Mould weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mould height: 450 mm • Max. mould height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection rate: 120 g/s • Plasticizing rate: 41 g/s Njdoyf Htyepfx Ah Iswd • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mould monitoring: No • Special programs: Yes Additional equipment • Extraction device (robot): ERC 23/1-E • Travel distances: X = 500 mm, Z = 1400 mm • Max. mould dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • Mould sensor system: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 10.000 obr/min, obremenitev mize: 4.000 kg, skupna masa: 13.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 3, Ta 3-osna obdelovalna naprava Nicolas Correa Euro 2000 je bila izdelana leta 1997. Opremljena je s krmilnikom Siemens 840 D in elektro vretenom Ganfior s hitrostjo 10.000 min⁻¹. Delovno območje znaša 2000 × 1250 × 700 mm, vreteno ima SK40 stožčasto vpenjalno glavo. Največja dovoljena obremenitev mize je 4.000 kg, sama teža stroja pa 13.000 kg. Če iščete visoko kakovostni rezkalni stroj, razmislite o Nicolas Correa Euro 2000, ki ga ponujamo v prodajo. Tehnične specifikacije Njdpfx Aheyctpio Iswd Velikost stožca: SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It comes equipped with a drum-type bar loader, an integrated hydraulic unit, and provides support at both the front and rear with a center height of 1100 mm. The machine features a sliding headstock, an oriented spindle stop, and a cross-slide with tool holders. It is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information about this machine. Nwsdpfex D D Ikjx Ah Ijd Overhauled in 2017, with two additional similar machines available (both overhauled in 2018). 2017 Overhaul included: Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindles S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the coolant pump, all coolant pipelines, and the coolant sensor. Replacement of wipers on the cross-slides. Replacement of all pneumatic lines and valves. Replacement of the machine compartment lighting, viewing windows, external fan, fan cables, and keyboard. Additional options (special services): Complete replacement (not just overhaul) of the guide bushing. Installation of a new central lubrication system. Replacement of bellows couplings, external encoders, and the display. Replacement of control and amplifier fans. Upon recommissioning, the "spindle positioning S4" option was activated and the bar loader set up. Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Sliding headstock • Cross-slide with 4 tool holders T11-T14 for vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • HYBRID 10+5 drum-type bar loader • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars (bars up to 8 mm without preparation) • Tryton collet • 2 different hybrid drum magazines • Directional-dependent spindle stop S1 • Can be configured with Robobar SSF 3 m bar loader Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, proizvajalec krmilnikov: MITSUBISHI, število osi: 3, Ta 3-osni stroj MORI SEIKI NL 2000 SY/500 je bil izdelan leta 2005. Gre za horizontalni stružni stroj z BF-vmesnikom in pogonskimi orodji ter menjalnikom orodij na obeh vretenih. Če iščete visoko kakovostne stružnice in rezkalne stroje, razmislite o stroju MORI SEIKI NL 2000 SY/500, ki ga imamo na voljo za prodajo. Kontaktirajte nas za več informacij. Prednosti stroja Tehnične prednosti stroja • Pogonska orodja so priložena • Nastavitev orodij na obeh vretenih Nwjdpfx Ajyaim Eoh Ijd Dodatne informacije Stroj je še vedno priključen na električno omrežje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik, širina mize: 550 mm, dolžina mize: 2.600 mm, največja hitrost vretena: 12.000 obr/min, število osi: 4, To vertikalno obdelovalno središče CHIRON MILL 2000 je bilo izdelano leta 2003. Opremljeno je s krmiljem Siemens Sinumerik. Stroj ima hitrost vretena 12000 min⁻¹. Dodatna oprema Nodpfx Ahoyi Eh De Ijwd • Transporter za ostružke Prednosti stroja Tehnične prednosti stroja • Hitri pomik 40 m/min • Zaloga orodij s kapaciteto za 24 orodij

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It is equipped with a TRUMPF TruDisk 6002 laser, offering a power range of 120-6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, which enhances its operational flexibility. If you are looking for a high-quality welding system, you should consider the KUKA KR 100-2 HA 2000 machine, which we offer for sale. Please contact us for more information about this machine. Nwsdpfx Asx D Np Hjh Isd Machine advantages Technical machine advantages • Weight (kg): 1202 • Laser output at the workpiece: 6000 W / Typical power stability at rated power: ±1% with active power control / Continuously adjustable power range: 120 to 6000 W / Beam quality at fiber coupling input: 8 mm / Numerical aperture at output coupling after fiber delivery: 0.1 / Wavelength: 1030 nm / Minimum laser light cable diameter: 200 µm / Maximum number of laser light cables: 2 / Maximum number with extended device size: 4 / Ambient temperature: 10-50 °C • Mounted on KSL-2000/2700 linear unit (4 meters) / TRUMPF TruDisk 6002 laser / Various shielded gas welding units with controls

Stanje: dober (rabljeno), številka stroja/vozila: 2004,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Stanje kot novo; še ni bil uporabljen v proizvodnji Krmiljenje: CNC-nadzorni sistem SIEMENS SINUMERIK 828 D TEHNIČNI PODATKI Glavno vreteno Premer struženja: 288 mm Dolžina struženja: 243 mm Premer vpenjalne glave: 210 mm Premer prehoda palice: 67 mm Maks. pogonska moč: 10,5/20,0 kW Maks. navor: 214 Nm C-os (ločljivost): 0,001° Območje vrtljajev do: 4.500 1/min Revolver (nosilec orodij) Število postaj: 12 Od tega gnane: 12 Vrtlaji gnanih orodij: 5.000 1/min Vpenjalo orodij: BMT 45 X-os: 175 mm Z-os: 350 mm Konjiček Premer puše: 65 mm Hod puše: 80 mm Nwjdpeyrd Uhefx Ah Isd OPREMA/DODATKI  Vpenjalni valj glavnega vretena (skozi-izvedba)  C-os glavnega vretena  Konjiček  Pogonska enota revolverja  Hladilni sistem  Transporter za ostružke  Izpiralna pištola  Odbiralec kosov  Tročeljustna vpenjalna glava ø 206  Dokumentacija

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Zapiralna sila: 200 t Premer vijaka: 50 mm Teža izstrela: 359 g Razdalja med vodili V: 570 mm Razdalja med vodili H: 570 mm Prostornina izstrela: 392 cm3 Vbrizgalni tlak: 2000 bar Euromap 67 1x izmetna enota Tip: Horizontalni Nwjdpfxoyktgqo Ah Iod Pogon: Hidravlični

Leto izdelave: 1980, stanje: dober (rabljeno), with pre-bending Technical Data: Bending length: 2000 mm Max. sheet thickness: 20 mm Nwodskzg E Aepfx Ah Ied Pre-bending capacity: 15/11 mm Lower roll diameter: 280 mm Upper roll diameter: 300 mm Main drive power: 16.2 kW Upper roll positioning drive power: 4.8 kW Lower roll positioning drive power: 3.7 kW Weight approx.: 14,200 kg Technical data, accessories, and machine description are subject to change and not binding.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 900 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 520 mm, premer struženja: 372 mm, TECHNICAL DETAILS Swing diameter over bed: 570 mm Max. turning diameter: 372 mm Max. turning length: 520 mm Chuck: 152 mm (203 mm) Spindle speed: 6,000 (45,000) rpm Bore diameter: 60 mm (68 mm) Travel (X/Z): 215 mm / 562 mm MACHINE DETAILS Year of manufacture: 2017 Weight: 4,000 kg Operating hours: 849 h (as of November/December) EQUIPMENT • Control: Siemens Sinumerik 820 D incl. Operate • 3-jaw power chuck • 12-position tool changer with driven tools • Automatic tool measurement Nwsdpfx Ahorpiuys Ijd • Parts catcher • Programmable tailstock • Oil skimmer • Work area lighting • 2x WTO drilling and milling unit, straight BMT 55 • 2x WTO drilling and milling unit, angled BMT 55 • 1x facing tool holder 25x25 mm • 3x facing and longitudinal turning holders • 4x universal combination holders • Chip conveyor

Stanje: novo, Leto izdelave: 2026, Hopper capacity: 40 kg Capacity: Up to 140 onions/min Raw material size: 45 – 140 mm Overall machine width: 1050 mm Overall machine height: 1880 mm Overall machine length: 4830 mm Number of working lanes: 2 Onion loading height: 1000 mm Onion discharge height: 700 mm Waste discharge height: 400 mm Power supply: 3 x 400 V / 50 Hz Installed power: 1.2 kW Compressed air connection: 8-10 bar Air consumption: 1.9 m³/min Noise level: Above 80 dB Frame material: Acid-resistant stainless steel and plastics approved for food contact CE Certificate: Yes Nwedpfx Aed Nimash Isd Topper: No

Stanje: rabljeno, Leto izdelave: 2000, skupna dolžina: 900 mm, skupna širina: 500 mm, skupna višina: 600 mm, - Leto izdelave: 2000 - Dokumentacija na voljo: Ne - CE-oznaka prisotna: Da - CE-certifikat na voljo: Ne - Serijska številka: 2147964 - Transportne mere: 900mm x 500mm x 600mm (d x š x v) - Število transportnih paketov: 1 Finančne informacije DDV: Navedena cena je brez DDV Nodpfxox Afals Ah Ijwd DDV/diferencirano obdavčenje: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega sektorja Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2000, skupna višina: 1.600 mm, skupna dolžina: 4.300 mm, skupna širina: 840 mm, Price: On request • Year of manufacture: 2000 • Documentation available: No Nodjykafaopfx Ah Iewd • CE certificate available: No • Serial number: 404 • Number of units: 6 - Unit type 1: - Tools included: Yes - Unit type 3: - Tools included: Yes - Unit type 4: - Tools included: Yes - Unit type 5: - Tools included: Yes - Unit type 6: - Tools included: Yes • Voltage [V]: 400 • Power consumption [A]: 15.8 • Power output [kW]: 10.2 • Transport dimensions: 4300mm x 840mm x 1600mm (L x W x H) • Number of transport packages: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/ Margin Scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2000, Lastna teža: 22.000 kg Delovna širina: 1500 mm Delovna dolžina: 2160 mm Debelina pločevine: 2 mm S kompletno nakladalnim sistemom - Letnik izdelave: 2000 - Dokumentacija na voljo: Da Nodpfx Ajww Eqcjh Ijwd - CE-oznaka prisotna: Da - CE-certifikat prisoten: Ne - Serijska številka: 12/50 - Upravljanje: CNC - Moč [kW]: 18,0 - Največja debelina pločevine [mm]: 2 - Največja delovna širina [mm]: 1500 - Opcije: Nakladalni sistem - Transportna teža [kg]: 22.000 kg Finančne informacije: DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkupi so možni kadarkoli za vse industrijske naprave. Lukas van Rossum

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: colour monitor integrated with the operator console The machine is equipped with a fully hydraulic clamping system and the modern MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Size of mounting plates (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection rate: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater power: 29 kW Number of heating zones, cylinder: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Nwjdpfjyugkwsx Ah Ied Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency converter, adjusting the motor speed to actual requirements during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class quality and proven industrial technology - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Increased lifetime of hydraulic components - Possibility to retrofit existing hydraulic injection moulding machines.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Four ENGEL injection moulding machines are available: 1) ENGEL ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55 mm, shot volume: 511 cm³, injection pressure: 1616 bar / 2052 bar, nozzle stroke: 350 mm, nozzle contact force: 67 kN, clamping force: 1500 kN, opening stroke: 606 mm, ejector force: 60 kN, ejector stroke: 150 mm, min. mould installation height: 294 mm, platen dimensions X/Y: 750 mm / 520 mm, weight: approx. 9500 kg, control system: CC100, operating hours: approx. 79,000 h. Includes ENGEL HLi automation robot. 2) ENGEL ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22 mm, shot volume: 38 cm³, injection pressure: 1500 bar / 2050 bar, nozzle stroke: 200 mm, nozzle contact force: 28 kN, clamping force: 300 kN, opening stroke: 330 mm, ejector force: 24 kN, ejector stroke: 70 mm, min. mould installation height: 110 mm, platen dimensions X/Y: 550 mm / 380 mm, weight: approx. 2500 kg, control system: CC100, operating hours: approx. 113,300 h. 3) ENGEL ES 2000/250, year of manufacture: 1993, core pulls: 3, injection unit: PVC, screw diameter: 70 mm, shot volume: 1154 cm³, injection pressure: 1400 bar / 1700 bar, nozzle stroke: 450 mm, nozzle contact force: 150 kN, clamping force: 2500 kN, opening stroke: 600 mm, ejector force: 70 kN, ejector stroke: 200 mm, min. mould installation height: 200 mm, platen dimensions X/Y: 910 mm / 910 mm, weight: approx. 16,000 kg, control system: CC90, operating hours: approx. 109,300 h. Includes Wittmann W322 automation robot. Nwedpsyu T D Dsfx Ah Isd 4) ENGEL ES 750/150 HL, year of manufacture: 1998, core pulls: 2, screw diameter: 35 mm, shot volume: 135 cm³, injection pressure: 1060 bar / 1600 bar, nozzle stroke: 200 mm, nozzle contact force: 28 kN, clamping force: 600 kN, opening stroke: 450 mm, ejector force: 40 kN, ejector stroke: 100 mm, min. mould installation height: 150 mm, platen dimensions X/Y: 600 mm / 560 mm, weight: approx. 4700 kg, control system: CC100, operating hours: approx. 108,600 h. Includes ENGEL Angusspicker automation robot. Documentation available. On-site inspection is possible.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Cycle-controlled lathe | Manufacturer: SEIGER | Model: SLZ 2000 Year of manufacture: 2011 The machine can be inspected by appointment. Condition: Functional / ready for operation. Operating hours (February 2026): approx. 15,289 h TECHNICAL DATA Working area: - Distance between centers: 4,000 mm - Swing diameter over bedways: 2,000 mm - Swing diameter over cross slide guide: 1,400 mm - Cross slide travel: 760 mm - Bed width: 1,350 mm Turning tool: Cross section (height x width) 40 x 40 mm Spindle: - Spindle diameter in front bearing: 300 mm - Spindle bore: 120 mm Main drive AC: - Drive power 100% / 60% duty cycle: 54 / 70 kW Nwodpjyq Rwtefx Ah Iod - Max. torque at spindle: approx. 18,000 Nm - Speed range: 3 - 450 rpm Tailstock: - Quill diameter: 320 mm Permissible workpiece weights: - Between centers without steady rest: 18,000 kg - Machine weight: 24 t Space requirements / Dimensions (LxWxH): - Machine without enclosure: 10.5 x 4.2 x 2.8 m Electrics: - Supply voltage / Rated frequency: 400 V, 50 Hz - Main drive power consumption: 54 kW EQUIPMENT / ACCESSORIES: - Control: SINUMERIK 840D pl - 2 x chip conveyors - Documentation - CE marking No guarantee for the completeness or accuracy of the technical data or equipment. Subject to prior sale. A detailed technical data sheet and information on equipment are available upon request.

Stanje: dober (rabljeno), Vlečna kljuka, vlečna sklopka, čeljustna sklopka -Proizvajalec: AL-KO, os z zavoro -Tip: B 2000-4 -Zavora: Tip 3081 A -Zavorni boben: Ø 325 mm, izrez Ø 160 mm / razmak lukenj Ø 205 mm Nedpfx Ahjyvrulo Iowd -Dimenzije: glej fotografije -Transportne mere: 1750/660/V340 mm -Teža: 134 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Distance between centers: 2,000 mm Center height: 230 mm Maximum swing diameter: 455 mm Maximum workpiece weight between centers: 800 kg Maximum workpiece weight, cantilevered (incl. clamping device): 200 Nm X-axis feed movement: Electromechanical drive with ball screw X-axis feed movement: Traverse speed 0.01 – 8,000 mm/min X-axis feed movement: Setup via electronic handwheel or direction push-button X-axis feed movement: Measuring system with glass scale, internal resolution 0.0005 mm Z-axis table movement: Table speed 0.01 – 10,000 mm/min Workpiece spindle motor: 3.0 kW at 0–300 rpm Workpiece spindle: MK5 and KK5 taper Nodpfx Ahjynubwe Iewd Control system: SIEMENS 840 D solution line Operation via conversational programming Electronic handwheel included Grinding spindle motor: 11 kW Grinding wheel peripheral speed: 35 (50) m/s Standard grinding wheel: 600 x 80 x 203.2 mm Right-hand face grinding wheel: 300 x 40 x 127 mm Internal grinding spindle: per customer request Tailstock taper: MK4 Tailstock: Manual (hydraulic) Tailstock foot switch with quill stroke 40 mm and MK5 Card file / Data management for workpiece data, up to 100 grinding wheels and 40 dressers Cylindricity error correction: program-supported for all dressable grinding wheels Dressing from workpiece spindle headstock or tailstock Dressing amounts are automatically compensated Optional integration of diamond form rollers or swing dressers Various dressing strategies available in the control system Integrated CAD program optional Import of existing CAD data optional B-axis: infinitely variable swivel Fast and repeatable positioning Available grinding spindle configurations: - External grinding wheel left - External grinding wheel left, face grinding wheel right - External grinding wheel left, external grinding wheel right - External grinding wheel left, internal grinding spindle - External grinding wheel left, face grinding wheel right, internal grinding spindle Production machine Can be equipped with loading portal and in-process measuring controls Modular system / Options: - Manual or automatic (infinitely variable) B-axis swiveling - Number and arrangement of grinding spindles (external and internal grinding spindles) - Positionar (Z-length measuring probe) - Touch detection - In-process measuring control - Controlled C-axis (non-circular grinding) - Hydrostatic guideway on X-axis (infeed axis) - Swing dresser, diamond form roller - Servo-controlled tailstock with programmable clamping force - Network connection - Data backup - Remote maintenance - Universal paper band filter - Compact air purification unit Grinding cycles: - X-plunge grinding - Z-plunge grinding - Z longitudinal grinding - Angular plunge - Multi-X plunge - Contour grinding - Angular oscillation - Positionar cycle - Non-circular machining - Face grinding - Z-peel grinding - Auxiliary function The machine was commissioned at the end of 2012 Modernizations 2022 Grinding table repair: €255.40 Removal of tailstock: €1,174.50 Removal of tailstock, 2nd technician: €868.50 Installation of reconditioned tailstock: €1,875.00 Installation + overhaul of tailstock: €12,073.42 Total documented work: €16,246.82

Stanje: dober (rabljeno), Leto izdelave: 2022, I am selling an automatic pneumatic crosscut saw Salvamac Salvapush 2000, year of manufacture 2022. Automatic infeed table 6.10 m (pusher system) Outfeed table 3.00 m Nedjvxbmwspfx Ah Iowd Total length: 10.50 m Optimization with automatic defect detection and automatic cutting pattern programming. Available immediately. CE equipment. Documentation included.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Kotlovnica za ogrevno vodo, nizkotemperaturni kotel BABCOCK WANSON MODEL: HW3P Moč: 1985 kW Nsdpfxoianacs Ah Iewd Leto izdelave: 2013 v zelo dobrem splošnem stanju; minimalne delovne ure - Cena po dogovoru - Dostava po dogovoru - Vsi tehnični podatki so vidni na slikah Prednostna prodaja trgovcem, podjetjem ali za izvoz. Vsi podatki brez garancije, pridržujemo si pravico do napak in vmesne prodaje. Prodajalec ne prevzema odgovornosti za tipkarske in prenosne napake.