Stroj za brizganje
KraussMaffei KM 420-2000 CX

Name: KraussMaffei KM 420-2000 CX
Brand: KraussMaffei
Availability: InStock

Leto izdelave

2018

Stanje

Rabljeno

Lokacija

Wrocław

Stroj za brizganje KraussMaffei KM 420-2000 CX

Prikaži karto

Podatki o stroju

Oznaka stroja:: Stroj za brizganje

Proizvajalec:: KraussMaffei

Model:: KM 420-2000 CX

Leto izdelave:: 2018

Stanje:: zelo dobro (rabljeno)

Cena in lokacija

Lokacija:: Kwiatkowskiego 5a, 52-407 Wrocław, Polska

Pokliči

Podrobnosti ponudbe

ID oglasa:: A21501202

Posodobitev:: nazadnje dne 13.03.2026

Opis

Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX

Basic Information

Manufacturer: Krauss Maffei
Model: KM 420-2000 CX
Machine number: 61030600
Year of manufacture: 2018
Control system: MC6
Control panel: colour monitor integrated with the operator console

The machine is equipped with a fully hydraulic clamping system and the modern MC6 control system.

Plasticizing Unit

Complete plasticizing unit designed for thermoplastics processing.
High-performance screw: HPS-UN
Screw diameter: 60 mm
Non-return valve: Yes
Nozzle type: open
Nozzle radius: 15 mm
Nozzle opening: 6 mm
Injection unit: SP 2000

Clamping Unit

Gtsdpfx Asyugkwed Aew
Clamping force: 4200 kN
Mould opening force: 250 kN
Size of mounting plates (horizontal × vertical): 1270 × 1230 mm
Tie bar clearance (horizontal × vertical): 800 × 800 mm
Max mould opening stroke: 1020 mm
Min mould height: 580 mm
Max platen opening stroke: 1600 mm
Ejector stroke: 250 mm
Ejector force (forward / backward): 95 / 49 kN

Injection Unit

Screw diameter: 60 mm
L/D ratio: 23.3
Injection pressure: 2420 bar
Injection volume: 792 cm³
Shot weight (PS): 720 g
Injection speed: 130 mm/s
Injection rate: 368 cm³/s
Screw speed: 285 rpm
Plasticizing capacity: 72.2 g/s
Nozzle contact force: 82 kN

Electrical & Hydraulic Equipment

Nominal pump motor power: 75 kW
Installed heater power: 29 kW
Number of heating zones, cylinder: 6 (+1 extended nozzle)
Dry cycle time (EUROMAP 6): 3.0 s / 560 mm
Required hydraulic oil volume: 1000 l

Machine Dimensions & Weight

Net weight (incl. control cabinet): 21.5 t
Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m
Max mould weight: 6700 kg

Optional Energy Saving System ESS (Energy Saving Systems)

The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines.

The system controls the hydraulic pump motor via a frequency converter, adjusting the motor speed to actual requirements during the production cycle.

Key benefits:
- Reduction of electric energy consumption by up to 30%
- Servo drive technology for the hydraulic pump
- World-class quality and proven industrial technology
- Reduced energy loss during idle operation
- Lower heating of the hydraulic system
- Increased lifetime of hydraulic components
- Possibility to retrofit existing hydraulic injection moulding machines.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2019

94 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+48 71 70... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Cantabria

1.511 km

Stroj za brizganje
KraussMaffeiKM 420-2000 CX

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 6.200 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4.200 kN, premer vijaka: 75 mm, Krauss-Maffei KM 420-2000 CX Injection moulding machine from Krauss-Maffei with a 420-tonne clamping force. Only 6,000 operating hours in automatic mode. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras include: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The injection moulding machine is delivered REFURBISHED by the UK Transitus technical expert team. Commissioning at customer facilities can be offered, ensuring machine functionality upon installation completion. Technical Details Gedpfx Aowq D Efed Aotw SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ INJECTION WEIGHT: 1126 g MAXIMUM DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOULD THICKNESS: 380 mm OPENING STROKE: 1020 mm TIE BAR DISTANCE: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282

Poglej podrobnosti

Mali oglas

CNC center za simultano struženje Spinner TTS65-Triplex

Nemčija

650 km

CNC center za simultano struženje
SpinnerTTS65-Triplex

Pokliči

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), A Spinner simultaneous turning center featuring three turrets, complete with extensive accessories, spare parts, and tooling, is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tooling package, and additional spare parts. Documentation is available. On-site inspection possible. Gsdpfxsua E Trj Ad Astw

Poglej podrobnosti

Mali oglas

Tiefenbronn

552 km

Rezkalni stroj
KNUTHEcoMill 350 CNC

Pokliči

Mali oglas

Arburg 1200T 2000-800 (vertikalno, vrtljiva miza, delovne ure: 9.562) Arburg 1200 T 2000-800

Trenčianske Stankovce

375 km

Arburg 1200T 2000-800 (vertikalno, vrtljiva miza, delovne ure: 9.562)
Arburg1200 T 2000-800

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Arburg 1200 T 2000-800 (vertikalna mašina sa obrtim stolom 1200 mm) Jedinica za zatvaranje 2000T Gsdpfjwugczex Ad Ajtw Prečnik stola: 1200 mm Ugao rotacije: 180 stepeni Sila zatvaranja: 200 tona Maks. sila otvaranja kN/mm: 115/500 Jedinica za ubrizgavanje Prečnik puža: 45 mm Zapremina šuta: 318 cm3 Težina šuta: 291 g Pritisak ubrizgavanja: 2470 bar 1. Model: T-model 2. Tip mašine: 1200 T 2000 - 800 3. Jedinica za plastifikaciju: Termoplastični cilindar 45 mm, visokootporan na habanje 4. Puž: Ojačana spojka puža za klinastu geometriju spajanja 5. Upravljanje: SELOGICA 'direct' sistem upravljanja 6. Tehnološki nivo: Nivo 2, servo-upravljan sa 2 regulacione pumpe 7. Obrtni sto: Napredno ergonomsko specijalno izvođenje, dvofazno, 180° napred/nazad naizmenično 8. Dizne: Otvorena dizna 45 mm sa vrhom dizne 9. In-Mould igličaste dizne: Električne &

Poglej podrobnosti

Mali oglas

Stroj za brizganje KraussMaffei KM 120-380 EX

Cantabria

1.511 km

Stroj za brizganje
KraussMaffeiKM 120-380 EX

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Horizontal injection molding machine from Krauss-Maffei with 120 tons clamping force. All-electric machine. Year of manufacture: 2008. MC5 control system. 63,000 operating hours. 40 mm screw diameter. Extras: anti-vibration plates, 8-zone flowmeter. Additional options: 1x pneumatic valve, 6 hot runner zones, Euromap 67 interface for robot connection. The machine is delivered REFURBISHED by our technical team and in optimum working condition. We can offer commissioning service at your facility. Technical Details Gsdpfx Adjttgybs Astw INJECTION WEIGHT: 185 g INJECTION VOLUME: 201 ccm OPERATING HOURS: 63,000 YEAR OF MANUFACTURE: 2008 TIE BAR DISTANCE: 470x470 mm PLATEN DIMENSIONS: 780x770 mm CLAMPING FORCE: 1,200 kN INJECTION PRESSURE: 1,860 bar SCREW DIAMETER: 40 mm MINIMUM MOLD HEIGHT: 200/450 mm OPENING STROKE: 850 mm

Poglej podrobnosti

Mali oglas

Soltau

845 km

Rezkalni stroj
Röders TecRXP300

Pokliči

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 320 mm, pomik osi Y: 300 mm, pomik po osi Z: 200 mm, največja hitrost vretena: 50.000 obr/min, skupna masa: 3.800 kg, teža obdelovanca (maks.): 200 kg, potrebna širina: 2.000 mm, zahteva za prostor dolžina: 1.800 mm, potrebna višina: 2.000 mm, Oprema: dokumentacija / priročnik, Röders RXP300 – Refurbished – The machine is completely refurbished, inspected, and measured at our facility. The machine once again meets the tolerances of a new machine! Working Area: X-axis: 320 mm Y-axis: 300 mm Z-axis: 200 mm (height) The clearance height above the machine table without chuck is 390 mm. Machine Table: Size: 370 mm x 350 mm Workpiece Weight: Maximum 200 kg Axis Drives: High-dynamic linear motors in all axes with integrated cooling. Feed Rates: 0 – 40,000 mm/min on all axes. Spindle: HSK25E, 50,000 rpm Tool Changer: 42 positions automatic 3D probe Controller: Röders RMS6 (latest version, 2024) Gjdpfjvvigmox Ad Ajtw The machine can be inspected in fully operational condition at any time. You are also welcome to learn more about the type and extent of our refurbished machines on our website or on our Hüttmann YouTube channel.

Poglej podrobnosti

Mali oglas

Stroj za brizganje Haitian JU 4500-2/2250 multi

Salzgitter

750 km

Stroj za brizganje
HaitianJU 4500-2/2250 multi

Pokliči

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 23.000 h, vpenjalna sila: 450 kN, premer vijaka: 70 mm, razmak između stupova: 810 mm, premer stebra: 70 mm, delovna prostornina: 1.239 cm³, tlak vbrizgavanja: 199 letvica, injekcijska masa: 1.127 g, vgradna višina: 850 mm, 4 izvleki jedra Gedpfx Ajxxxa Rjd Ajtw Bimetalni polž 70 mm

Poglej podrobnosti

Mali oglas

Obdelovalni center - navpično YCM TV2110B

Nemčija

796 km

Obdelovalni center - navpično
YCMTV2110B

Pokliči

Stanje: rabljeno, Leto izdelave: 2012, x-hod 2100 mm y-hod 1020 mm z-hod 762 mm Krmilnik Fanuc MXP-200FP Hitrost vretena 6000 min⁻¹ Moč vretena cca 22 kW Gsdsx Sr A Uopfx Ad Aotw Navor na vretenu cca 550 Nm Vpenjalo orodja SK 50 Vpenjalna površina mize 2300 x 1020 mm Največja obremenitev mize 3000 kg T-utori 6 x 22 mm Razmak T-utorov 150 mm 3-osni CNC-obdelovalni center Oprema/Dodatki: - Menjalec orodij z verižnim magazinom, 40 postaj - max. Ø orodja: 120/240 mm - max. dolžina orodja: 350 mm - Naprava za hlajenje s centralno črpalko in filtrom - Odsesavanje emulzijske megle - Elektronski ročni kolesni upravljalnik - 2 kosa magnetnih vpenjalnih plošč 800 x 400 mm - različni držaji SK50 - Transporter za odrezke

Poglej podrobnosti

Mali oglas

Arburg 570 S 2200-800/290 Arburg 570 S 2200-800/290

Romunija

653 km

Arburg 570 S 2200-800/290
Arburg570 S 2200-800/290

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, vpenjalna sila: 2.200 kN, premer vijaka: 70 mm, injekcijska masa: 172 g, Ta Arburg 570 S 2200-800/290 je bila izdelana leta 2020. Opremljena je s hidravličnim pogonskim sistemom in Selogica krmiljenjem za natančno delovanje. S zapiralno silo 2.200 kN in premerom polža 40 mm je idealna za natančne brizgalne naloge. Izkoristite priložnost in kupite to hidravlično brizgalno maso Arburg 570 S 2200-800/290. Kontaktirajte nas za dodatne informacije. Zapiralna enota • Razdalja med vodili: 570 × 570 mm • Hod odpiranja: 650 mm • Izmetalna sila: 70 kN • Izmetalni hod: 200 mm Brizgalna enota • Velikost brizgalne enote: 290 • Tlak brizganja: 2.500 bar • Volumen brizga: 188 cm³ Pogon in krmiljenje • Pogon: Hidravlični • Krmiljenje: ARBURG Selogica Gtodpfxex Nkp Ij Ad Asw

Poglej podrobnosti

Mali oglas

Stroj za brizganje Arburg 470S 1100-290 2K

Schwäbisch Gmünd

491 km

Stroj za brizganje
Arburg470S 1100-290 2K

Pokliči

Stanje: rabljeno, Leto izdelave: 2017, Injection moulding machine Arburg 470S 1100 290, year of manufacture 2017 2K machine Gedpfx Aew D R N Rjd Astw The machine has been out of operation for a longer period. It was built in 2017 and has only around 21,600 operating hours. The machine features a clamping force of 1,100 kN, with a 290 unit and 35 mm barrel installed below, and a 100 unit with 30 mm barrel above. Only ABS and TPE have been processed so far. The machine includes an integrated hot runner, three core pulls, and other options. Also included is a Kuka handling system, operated via the machine’s Selogica control, and the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale.

Poglej podrobnosti

Oglašujte tukaj