Valjčna brusilka

Geibel & Hotz RS 2000 CM-DS

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Cpsdpfx Ajph Uk Nsfnew Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 2.050 mm, pomik osi Y: 850 mm, pomik po osi Z: 750 mm, število mest v zalogovniku orodij: 36, dolžina mize: 2.200 mm, širina mize: 850 mm, model krmilnika: OKUMA-OSP-HMI, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 950 mm, moč vretenovega motorja: 22 W, število vreten: 36, hitri pomik na osi Z: 16 m/min, hitro pomikanje X-os: 16 m/min, hitri pomik os Y: 16 m/min, nos vretena: BT 50, največja hitrost vretena: 10.000 obr/min, hitrost vretena (min.): 50 obr/min, obremenitev mize: 2.500 kg, premer orodja: 120 mm, dolžina orodja: 400 mm, teža orodja: 20 g, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 3-axis vertical machining centre with OKUMA OSP-HMI CNC Codeu Dinkepfx Afnspw

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Cjdpfxofxyhfo Afnopw Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 87.327 h, Funkcionalnost: popolnoma funkcionalen, We offer you: CNC Machining Centre – Universal Manufacturer: DMG MORI Model: DMU 210P duoBlock µ- Precision Year of manufacture: 2013 Control system: Siemens 840D sl Technical Data: Travel: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Swivel range: 360° Main spindle: Max. speed – main spindle: 18,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Cjdpfxeyhbcue Afnjpw Tool changer: Tool interface: HSK-63A Number of tool stations: 120 positions Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Features & Accessories: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - Tool measurement within the working area, color: BLUM Laser NT Hybrid - KZ 40 bar through the spindle center - Coolant tank 2,500 l - Chip conveyor - Rotating viewing window - Electronic handwheel - 3D path control - Infrared probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal light - Rinsing gun with pump - Operating mode 4 - Machine adaptation for aluminium and glass processing, including: - Linear guides with additional Viton wipers - Ball screws partially with additional Viton/felt wipers - Air seal for all linear measuring systems - Lubrication interval reduced to 10 to 15 minutes (overgreasing) - Adapted maintenance schedule for the steel covers - Interface for camera monitoring and integration into the control system - Machine with vacuum preparation, including: - 2-channel rotary union, special centering bush and cable guidance in T-slots to the table edge - Additional compressed air connection at the edge of the table plate (opposite vacuum connection) - Integration of vacuum monitoring at terminals with NC stop and error message "Vacuum error" - Oil-resistant rubber hose, secured with 2 clamps at the rotary union - Evaluation of the error "Minimum level" in feed and spindle stop - Monitoring of coolant flow for internal and external coolant supply - Machine preparation (cable routing) for the use of the spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides on the X, Y and Z axes were replaced. Accessories, depicted tools and clamping devices are only included in delivery if specified in the additional information. Subject to prior sale. Modifications and errors in technical data and information excepted!

Stanje: rabljeno, Tehnični podatki: Premer brušenja: 600 mm Dolžina brušenja: 2600 mm Višina konic: 180 mm Cpodpfow Rktbex Afnow Premer obdelovanca - maks.: 360 mm Obodna višina: 600 mm Premer brusnega koluta: 600 x 305 x 160 mm Skupna potrebna moč: 17,6 kW Naprava za hlajenje: 90 l/min Obratov vretena obdelovanca: 12,5-250 min^-1 Brezstopenjski pomik: 0,05 - 6,0 mm Teža stroja pribl.: 8,2 t Dimenzije stroja pribl. D x Š x V: 6,4 x 2,2 x 1,9 m Finibalanz naprava za uravnoteženje Konjiček s cilindrično napako in digitalnim prikazom X=0,001 - Z=0,01 Naprava za radij 2-10 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, DMG MORI DMC 1150 V Centro de mecanizado vertical CNC: Siemens CELOS Selector de modo de operación SMARTkey Año: 2017 Velocidad del husillo programable continuamente: 20–24,000 rpm Potencia del motor del husillo: 24 kW Horas de husillo: 2200 h Avance programable continuamente en ejes X, Y, Z hasta 42,000 mm/min Avance rápido X, Y, Z: 42 m/min Recorrido eje X: 1,150 mm Recorrido eje Y: 700 mm Recorrido eje Z: 550 mm Tamaño de la mesa: 1,460 × 750 mm Carga máxima de la mesa: 1,500 kg Dimensiones totales: 6,185 × 5,421 × 2,910 mm Dimensiones de transporte: 3,733 × 2,855 × 2,710 mm Peso de la máquina: 9,200 kg Selector de modo de operación SMARTkey Cpjdpfx Asyf Im Ijfnjw Avance programable continuamente en ejes X, Y, Z hasta 42,000 mm/min Avance rápido X, Y, Z: 42 m/min Accesorios: - Revista de herramientas para 60 herramientas - Transportador de virutas - Sonda de herramientas Blum - Sonda de pieza Heidenhain - Mesa giratoria de 4º eje Nikken BZA CNC Z180 - Separador de niebla - Unidad refrigeradora - Refrigeración a través del husillo - Juego de 63 portaherramientas HSK - Pistola de lavado - Extractor de niebla de aceite - Documentación completa

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Cpjdpju A Dn Nsfx Afnew Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, as new condition * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad * Beam switch with 4 LLK outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D * Optional fieldbus interface and IIO3 card available * 2 units available Cjdpfx Asqfguajfnjpw

Leto izdelave: 2007, stanje: generalkompletno obnovljen (rabljeno), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Codpfemmfwuox Afnopw Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface quality: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy machine setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility upon order placement. A 6-month warranty is provided on all machine components. Commissioning and training services are available upon request.

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL KEY DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping surface NC rotary table: Rotary indexing table: 2,400 x 1,900 mm Max. transport load (with centrally supported load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor/brand main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range rpm 0-738 mid range rpm 739-1,842 high range rpm 1,843-6,000 Axis drives/axis feed rates: Axis drive motors: brand Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Feed rate max.: X, Y, and Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Linear axis drive systems: X-axis (longitudinal): preloaded ball screw Ø 63 x 40 Z-axis (vertical): preloaded ball screw Ø 63 x 20 Cedpoygiwqofx Afnopw Y-axis (cross): preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal) 6 pcs. type INA RUE 55 EL Z-axis (vertical) 4 pcs. type INA RUE 65 EL Y-axis (cross): 8 pcs. type INE RUE 55 E-HL and additional damping unit Clamping table / table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch spacing outer slots 1,800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with boost to 37 bar IKZ Special operating mode 4 RepairFIT is our proven offer for a profitable entry into our product lines. Machines offered in this line are sourced by us following a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.