Transportne Trakove nakup rabljenega (4.389)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 13,000 x 1,700 x 1,700 mm Weight: 1,950 kg Total Power Requirement: 13.5 / 17.5 kW Block Bandsaw TTM-1100 - Maximum log diameter: 1,100 mm - Maximum cutting length: 10 m - Rail length: 12 m - Main drive: 11 or 15 kW - Horizontal feed drive: 1.10 kW - Vertical feed drive: 1.10 kW Ppjdsv A Htqepfx Adyol - Roller feed drive: 0.18 kW - Voltage: 400 V / 50 Hz - Electrically adjustable saw head - Feed speed forward: 1.5 - 20 m/min - Feed speed reverse: 5.0 - 40 m/min - Feed speed up/down: 20 mm/s - Saw band dimensions: length 4.80 - 4.90 m; width 35 - 38 mm; thickness 1.1 - 1.2 mm; tooth pitch 22 mm - Includes operator seat - Includes turning rollers - Includes log clamp - Includes log supports - Includes visual ruler - Includes circular scale - Saw unit dimensions (W=2,400, L=1,700, H=1,700 mm) - Saw unit weight: 950 kg - Rail weight (2 x 6.0 m): 700 kg - Rail accessories weight: 300 kg - Dimensions: L=13.0 m x W=1.7 m x H=1.7 m - Total weight: 1,950 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 1820x585x1450 mm Weight 500 kg Total Power Requirement 4 kW Edge Bander KANTOMAX EASY Podpfx Adevz Hd Hjyspl - Min. / Max. Edge Thickness: 0.4 – 3 mm - Min. / Max. Edge Height: 15 – 48 mm - Min. / Max. Workpiece Height: 12 – 45 mm - Min. Workpiece Width: 80 mm - Min. Workpiece Length: 120 mm - Feed Motor: 1.1 kW - Feed Rate: 8 m/min - Operator control panel at machine infeed, at eye level - Chain feed - Support table for PVC and ABS edgebands - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint consolidation - Central adjustable top pressure - Glue pot with Teflon coating for hot-melt granulate - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 – 200 °C - Pneumatic end trimming - Pneumatic cylinder for workpiece spacing - End trimming unit for front and rear edge overhang, high-precision linear guide, Motor 0.5 kW, 200 Hz, 12,000 rpm, pulling cut for high accuracy - Flush and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Buffing unit for smoothing edges on top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm - Total power consumption 4.0 kW / 400 V - Extraction connection Ø 100 mm - Extendable workpiece support - Noise protection enclosure with inspection window - Compressed air connection 6 bar - Dimensions L=1820, W=585, H=1450 mm - Weight 500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 2650 x 640 x 1400 mm Weight: 700 kg Total connected load: 5 kW Edge Banding Machine KANTOMAX BASIC - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 55 mm - Min./max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min. - Operator panel at machine infeed at eye level - Chain feed system - Support plate for PVC and ABS edging - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for effective glue joint compression - Centrally adjustable top pressure - Teflon-coated glue pot for hot melt adhesive granules - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece separation Ppodjvz E T Hepfx Adyel - End trimming unit for front and rear edge overhang, high-precision linear guides; motors: 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom and side, for rounding pre-milled PVC edges - Buffing unit for edge finishing top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, height adjustable - Total power consumption: 5.0 kW / 400 V - Extraction connection Ø 100 mm - Extendable workpiece support - Noise protection enclosure with viewing window - Compressed air connection 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4200 x 1500 x 1500 mm Weight: 1050 kg Total Power Requirement: 8 kW Edgebander KANTOMAX BASIC FÜ+EK DELUXE - Min./max. edge thickness: 0.4 – 2 mm - Min./max. edge height: 15 – 55 mm - Min./max. workpiece height: 15 – 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW Ppedsvz E Tmjpfx Adysl - Feed speed: 12 m/min - Control panel (touch screen) at machine infeed, eye-level - Chain feed - Magazine plate for PVC and ABS edging rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue line consolidation - Centrally adjustable top pressure - Glue pot, Teflon-coated, for hot-melt granulate, capacity 3 kg - Glue application to workpiece via glue roller - Electronic temperature control, operating temperature 180 – 200°C - Pneumatic guillotine for cutting edging material - Pneumatic cylinder for workpiece spacing - Jointing cutter aggregate with 2 carbide-tipped jointing cutter heads for premilling in front of glue station, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors at 1.4 kW each, 200 Hz, 9000 rpm (1 clockwise, 1 counterclockwise) - Heating lamp for pre-warming the panel - Pre-cutting from roll - 3 solid steel pressure rollers - Flush and radius trimming unit top and bottom with vertical and horizontal sensing, 2 motors at 0.5 kW each, 200 Hz, 12,000 rpm - Contour trimming unit (corner rounding) top and bottom, for flush trimming and corner rounding of PVC edging, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with top, bottom, and side sensing for rounding pre-trimmed PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors at 0.18 kW each, 50 Hz, 1400 rpm, inclinable and height adjustable - Spray nozzle system (cleaning fluid) - Total power consumption: 8.0 kW / 400 V - Extraction ports: 4 x Ø 100 mm - Extendable workpiece support - Acoustic enclosure with inspection window - Compressed air connection: 6 bar - Machine dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 3810 x 575 x 1520 mm Weight: 1000 kg Total Power Requirement: 8 kW Edge Banding Machine KANTOMAX BASIC FÜ+EK - Minimum / Maximum Edge Thickness: 0.4 - 2 mm - Minimum / Maximum Edge Height: 15 - 48 mm - Minimum / Maximum Workpiece Height: 10 - 45 mm - Minimum Workpiece Width: 80 mm - Minimum Workpiece Length: 120 mm - Feed Motor: 1.1 kW - Feed Speed: 8, 12, 16 m/min - Control Panel at machine infeed at eye level - Chain feed system - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven primary pressure roller and follow-up rollers to ensure compression of the glue joint - Centrally adjustable top pressure - Glue pot Teflon-coated for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, operating temperature 180 - 200°C - Pneumatic end trimming station - Pneumatic cylinder for workpiece spacing Podpevz E Scefx Adyspl - Jointing unit with 2 DIA jointing cutter heads for trimming before edge gluing station, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (one clockwise, one counter-clockwise) - End trimming unit for front and rear edge overhang, high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pulling trim cut for high accuracy - Flush and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit top and bottom for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit for finishing top and bottom edges, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, inclinable and height-adjustable - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound insulation cabin with inspection window - Compressed air connection: 6 bar - Machine dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1050 x 830 x 1100 mm Weight: 133 kg Total power requirement: 2.1 kW Profile edge banding machine KAM535NEO - Motor output S1: 250 (+1750) W - Voltage: 400 V / 3 / 50 Hz - Feed speed: 0–15 m/min - Table size: 1000 x 700 mm - Table height: 850 mm - Minimum workpiece thickness: 10 mm - Maximum workpiece thickness: 50 mm - Edge width: 13–54 mm - Edge thickness: 0.3–3 mm - Operating air pressure: 4–5 bar - Operating temperature: 170 °C - Minimum internal curve radius: 20 mm - Sound pressure level dB(A): < 70 - Packaging width: 830 mm - Packaging length: 1,050 mm - Packaging height: 1,100 mm - Gross weight: 161 kg - Net weight: 133 kg Ppsdpfovz E Hmox Adyjl - Semi-automatic edge banding machine - Suitable not only for straight, but especially for applying edging to curved workpieces - Direct adhesive application on both straight and curved edges - Double-sided application to laminate and edge - Automatic length cutting - Glue temperature electronically adjustable - Variable feed speed control - 1750 W heating capacity - 250 W feed motor

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 3200 x 780 x 1500 mm Weight 800 kg Total power requirement 8 kW Edge banding machine KANTOMAX BASIC FÜ - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 48 mm - Min./max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Operator control panel at machine infeed at eye level Psdsvz E Evopfx Adyopl - Chain feed system - Support table for PVC and ABS edge bands - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for bonding seam compression - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to workpiece by glue roller - Electronic temperature control, operating temperature 180 - 200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece separation - Joint trimming unit with 2 DIA jointing cutter heads for preparing before the glue section, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 clockwise, 1 counterclockwise) - End trimming unit for front and rear edge overhang; high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius trimming unit (top and bottom) with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit: tracing from top, bottom, and side to round pre-trimmed PVC edges - Buffing unit for finishing edge surfaces (top and bottom), 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, angle and height adjustable - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Noise protection enclosure with viewing window - Compressed air connection 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 4600 x 1660 x 1750 mm Weight: 355 kg Total Power Requirement: 5.6 kW Block Bandsaw BBS-550 Podpfx Adjvz Ex Asyjpl The BBS 550 is ideal for cutting softwood, hardwood, dry or frozen timber, and wood prisms with a length in accordance with the machine’s design. - Maximum cutting length depends on the extension modules - All types of wood can be cut with the same saw blade - Robust and vibration-free construction - Minimal maintenance requirements - Simple operation - Heavy-duty precision cast-iron wheels - Precision guides - Eccentric tensioner - Pre-cutter swivel mechanism - Manual cutting height adjustment - Manual feed - Supplied with a 4.6 m roller track Technical Data: - Max. log diameter: 550 mm - Max. board width: 530 mm - Max. saw blade stroke: 20 mm - Max. cutting depth: 220 mm - Standard cutting length: 3.7 m - Extension section: 2.3 m - Max. cutting length: unlimited - Min. cutting length: 0.9 m - Drive wheel motor power S1 (100% duty): 4 kW / S6: 5.6 kW - Vertical feed: optional - Horizontal feed: manual - Max. feed speed: manual - Wheel diameter: 400 mm - Wheel width: 25 mm - Bimetal saw blade: 3200 x 27 x 0.9 mm - Kerf: 1.5 – 2.2 mm - Saw blade speed: 15 m/s - Machine dimensions (W x H x L): 1750 x 1660 x 4600 mm - Weight: 355 kg - Extension weight: 76 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Brand KDF110 Optimat Ambition – only 1,150 operating hours Make: Brandt Model: KDF 110 Year of manufacture: 2012 Pjdoxvirfopfx Adyepl Serial No.: 0-261-20-6960 Control: Easy Control 10+ non-contact distance control, feed-regulated with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / workpiece guide: Central control, 2 roller tracks Jointing unit: 2 x 0.75 kW 200 Hz, including joint cutter set in DIA version, manual positioning via Siko counting dial, max. 3 mm stock removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing unit for hotmelt adhesive and PU application option, magazine, pressure zone with electro-pneumatic 2-point positioning via central control Pressure zone: 1st roller powered, 2 free-running rollers for excellent and consistent compaction End trimming unit: 0.18 kW, 12,000 rpm Milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotation, 3-position setting for chamfer/radius (R2), overhang and straight edges. Max. 3 mm edge thickness with Siko counting dial Profile scraper: max. 3 mm edge thickness Surface scraper: Reversible knife Chain width: 80 mm Edge material (roll): 0.4 – 3 mm End trimmer device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: for workpiece thickness 8–22 mm: 70 mm; for 23–40 mm: 120 mm (dependent on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed rate: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Sestavljen iz: - Podajalna miza Profi TBL100/20/06 (HOMAG, letnik 2014) - Profil KAL310/7/A3 (HOMAG, letnik 2014) KAL je primeren za obdelavo oplemenitenih lesenih plošč: - z melaminskim robom 0,3-0,4 mm - z ABS in PP robovi 1,0-2,0 mm (na voljo orodja R 1,0 1,5 2,0) Stroj je dodatno opremljen z rezkalno enoto za vertikalno in horizontalno utiranje in rezkanje. V primeru interesa lahko pošljemo popolno potrdilo naročila. Ppjdpsqi Hqiefx Adyol Demontaža in nakladanje stroja sta v domeni kupca.

Stanje: rabljeno, Stroj za lepljenje robov Tempora F 60.06 - Leto izdelave: 2018 - Spojna rezkalnica, rezkalnica za radij, strgalo za radije in površine - Sredstva za čiščenje in ločevanje - Pršilna naprava - Debelina roba: 0,4–6 mm Ppsdpfx Aox Ha I Usdyjl - Dolžina postavitve: 3220 mm - Žaganje robov

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Leto izdelave: 2011 Stanje: stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Brezstopenjska hitrost podajanja 10–18 m/min Krmiljenje Edge Control 19 z 18,5" barvnim zaslonom na dotik Agregat za dodajoče rezkanje Podajanje robnih trakov Postaja za nanašanje lepila, kartuša, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Podpfx Adewka N Tjyopl Agregat za krajšanje Večnamenski rezkalni agregat Kopirni rezkalni agregat Agregat za obla robove Ravna rezkalna rezila Polirna enota Debelina obdelovanca 6 - 60 mm Debelina robnega traku 0,4 - 8 mm Minimalna širina obdelovanca 60 mm Najkrajša dolžina obdelovanca 180 mm Dimenzije: 5300x1500x1600 mm Teža: 2200 kg Lokacija: 65439 Flörsheim Razpoložljivost: na kratki rok

Stanje: rabljeno, Holz Her STREAMER 1057 FÜ + PU Tłoušťka hrany 0,4 - 6 mm Moderní ovládání s voličem pro nastavení agregátů Předfrézovací agregát pro přípravu materiálu před nanesením lepidla Plně automatický zásobník hran pro rolový i páskový materiál Stanice pro nanášení lepidla GLU-JET na kartuše + PU lepení Nanášení lepidla pomocí tryskové technologie Výška obrobku 6-60 mm Automatické nastavení výšky lepidla Vysoce kvalitní tříválcová přítlačná jednotka, 1. válec poháněný motorem Pneumatická ořezávací jednotka pro rolový i páskový materiál do tloušťky hrany 6 mm S pneumatickým nastavením sklonu ořezávacích pil 0-10° Frézovací agregát pro zarovnávací frézování do 6 mm, frézování rádiusů, zkosení až do 15° Agregát pro kopírování rohů – tloušťka hrany 3 mm Jednotka stíracích nožů na zkosení a rádiusy se 2 držáky nožů Jednotka plochých stíracích nožů – povrchová úprava Stříkací zařízení – PU Pedpfxoxqa Iyj Adyepl Stroj obsahuje veškeré pracovní nástroje Stroj je dílensky otestován a ve špičkovém stavu

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 maks. višina obdelovanca približno 40 mm min. dolžina obdelovanca približno 250 mm min. širina obdelovanca približno 70 mm Pomik približno 11 m/min. Pripravljen za obratovanje v približno 4-5 min. Poraba energije približno 11 kW Z ogrevanim vstopnim ravnilom S hitro grelnim lepilnim rezervoarjem Pnevmatsko kapiranje robov do 3 mm S kapirno žago za debelino roba do 5 mm Ppedpfx Adowka Tlsyol Z rezkalno postajo po želji opremljeno s kombiniranimi rezkarji z izmenljivimi ploščicami za radiusno, ravno in posneto rezkanje Konzola, zložljiva in izvlečna proti sprednji strani S podvozjem Z integriranim odsesavanjem D x Š x V 3600 x 1400 x 1200 mm Teža približno 670 kg Razpoložljivost: kratkoročno Lokacija: Flörsheim

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Semi-automatic edge banding machine for molded parts, suitable for edge heights up to 140 mm, feed speed adjustable from 2.5 to 12 m/min, quick-change device for glue pot, glue pot and glue roller with Teflon coating, standby function, tiltable worktable up to 45°, and digital length cutting unit. Includes the following options: • Electropneumatic premelting unit for cylindrical 2 kg cartridges Podsd Sb Duopfx Adyepl • Patented top pressure feed • Extension beam with steel balls

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with pre-milling unit, hotmelt adhesive application for straight workpieces (EVA-PUR gluepot with drainage function optional), HF end-trimming station, HF milling unit, corner copying unit, chain feed, double pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequencing and integrated track control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and heavy wood veneer roll material, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed rate: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touch screen. • Automatic edge feeder for roll material via rotary roll table, D=800 mm. • Two contra-rotating, sensor-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge application. • Long infeed fence (650 mm) with support. • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leakproof with glue supply from below (excess glue is automatically returned to the gluepot), precision glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for an extended period but remains switched on). Optional: EVA/PUR gluepot with drainage/cleaning function for rapid color change. • Automatic strip magazine (70 mm intake capacity) with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely conical spring-loaded pressing rollers ensures optimal joint formation between the edge material and the workpiece, with digital counter for pressure zone adjustment. • High-frequency end-trimming saw equipped with HF motor, 0.35 kW, 12,000 rpm, two saw blades and high-precision linear guides for clean and precise cutting, equipped with dust extraction hood. • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters, suitable for radius, flush, and bevel milling, horizontal and vertical workpiece tracing, aggregate adjustment with digital counters for different edge types, two chip extraction hoods with 2 x Ø 100 mm central extractors, height adjustment of the upper unit linked to the top pressure roller. • Corner copying unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, selectable via control panel. Option for single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idle time, on/off functions for processing units and error diagnostics, including digital meter counter for edge material usage. • LED lighting in the enclosure Ppsdpfxod R U Age Adyol • Riepe spray systems for anti-adhesion, NFLY, and cleaning agent optionally available Optional finishing units (3 free spaces): • Radius scraper unit: Light scraping cut removes any milling marks left by radius cutters, providing a perfect finish.

Stanje: rabljeno, Used stainless steel tank / transport container / IBC Previous application: Pharmaceuticals, cosmetics Article no.: 10800 Volume: 1,000 litres Type: Upright in galvanized stacking frame Contact material: 1.4571 / AISI 316 Manhole: 400 mm Design: Single-walled Pjdpjv Dt Scefx Adyopl Operating pressure acc. to nameplate: ATM Tank dimensions: Total width: 1,020 mm Total length: 1,220 mm Total height: 1,700 mm Materials: Internal: 1.4571 / AISI 316 External components: 1.4301 / AISI 304 Features: Nameplate: No Outlet diameter: DN50 Outlet valve: Disc valve Clearance from drain to floor: 280 mm

Stanje: rabljeno, Used stainless steel tank / transport container / IBC Previous use: Pharmaceuticals, cosmetics Item number: 10804 Volume: 1,000 litres Type: Upright in galvanized stacking frame Product-contact material: 1.4571 / AISI 316 Manway: 400 mm Design: Single-walled Operating pressure according to nameplate: ATM Psdsv Dt Nnspfx Adyopl Tank dimensions: Overall width: 1,020 mm Overall length: 1,220 mm Overall height: 1,640 mm Materials: Interior: 1.4571 / AISI 316 Exterior components: 1.4301 / AISI 304 Features: Nameplate: No Outlet diameter: DN50 Outlet valve: Disc valve Distance from outlet to floor: 280 mm

Stanje: dober (rabljeno), Used stainless steel tank / transport container Item number: 10851 Previous application: Paint industry Volume: 1000 L Type: Vertical in stainless steel frame Product contact material: 1.4301 / AISI 304 Manhole: Ø 400mm Operating pressure according to nameplate: ATM Pjdpfovx R Rlex Adyepl Tank dimensions: Overall width: 1050 mm Overall length: 1050 mm Overall height: 1820 mm Cylindrical height: 1000 mm Materials: Inner: 1.4301 / AISI 304 Frame: 1.4301 / AISI 304 Features: Nameplate: Yes Leg height: 420 mm Empty weight: 141 kg Without outlet

Stanje: dober (rabljeno), Used Stainless Steel Transport Container / Pressure Vessel Podpfx Adogybitjyepl Item Number: 10545 Previous Application: Food industry Volume: 250L Type: Upright, on four legs with forklift tunnel Product-contact material: 1.4301 / AISI 304 Design: Single-wall Operating Pressure according to nameplate: 0.9 bar Tank Dimensions: External diameter: 600 mm Total height: 1540 mm Overall width: 600x600 mm Materials: Internal: 1.4301 / AISI 304 External: 1.4301 / AISI 304 Features: Nameplate: Yes Outlet diameter: DN 50

Stanje: dober (rabljeno), Used Stainless Steel Transport Vessel / Pressure Tank Item Number: 10543 Quantity: 13 Previous Application: Food Industry Volume: 950L Type: Vertical, on four legs with forklift tunnel Product-contact material: 1.4301 / AISI304 Design: Single-walled Manway lid Ø 400mm Operating pressure per nameplate: 0.7 bar Tank Dimensions: External diameter: 1000mm Total height: 1800mm Overall width: 1000x1000mm Pedpfx Adsgx U Rgoyopl Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Fittings: Nameplate: Yes Outlet diameter: DN 50 Outlet valve: Disc valve

Stanje: rabljeno, Leto izdelave: 2020, Rabljeni stroj Letnik izdelave: 2020 Oprema: - Upravljanje agregatov preko zaslona na dotik - Dodajalni rezkalni agregat - Lepilni rezervoar - Kapni agregat - Radialni rezkalni agregat - Radialni strgalo - Površinsko strgalo - Polirni agregat - Pršenje spredaj in zadaj Lokacija: Porenje-Pfalška Razpoložljivost: po dogovoru Pedsx Enqujpfx Adyepl Prodaja po naročilu stranke. Podatki brez jamstva.

Leto izdelave: 2024, Stanje: rabljeno, New: Yes Pjdpfx Asx S N Dpsdyjpl Suitable for use with: agricultural machinery

Stanje: rabljeno, Lange B90 KFE Debelina roba 0,4 - 3 / 5 mm Upravljalna plošča: PLC zaslon na dotik Predrezalna enota za obdelavo pred lepljenjem Avtomatski magazin za robne trakove za material v roli Teflonsko prevlečen, hitro menjajoč kotliček za talilno lepilo v granulatu Delovna višina 8 - 50 mm Pedpfjxl Aw Tex Adyepl Natančno nastavljiv lepilni valj Klešče za rezanje do 3 mm za predrezovanje trakastega materiala Pritiskalna enota Rezkalna enota Multifunkcijska rezkalna enota za poravnavo, radij in posnetje robov Enota za kopiranje vogalov za robove do 2 mm, vklop iz upravljalne plošče Radij strgalo Ploščato strgalo Polirna enota Razpršilna enota na vstopu in izstopu Letnik 2018 Stroj je DELOVNO SPOSOBEN v DOBREM STANJU Ex site CENA NETO € 15.000,00

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.920 mm, višina obdelovanca (maks.): 60 mm, trajanje garancije: 3 meseci, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Program changes and tool adjustments are easily performed via the 18.5" touchscreen control panel. The GlueJet adhesive system features a short heat-up time of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. PUR adhesive changeover and system cleaning are extremely simple and can be completed within minutes. Axis adjustment is carried out by high-precision, repeatable servo motors. Special configuration for film-protected materials such as high-gloss and super-matte surfaces! One of the machine’s absolute highlights is the multifunction package, which proves especially valuable for workshops processing a wide variety of edge types. The DIA tooling is multi-stage and allows on-the-fly switching between radii and bevels—covering longitudinal milling, corner copying, and profile scraping. The extendable workpiece support and extended infeed zone facilitate handling of large panels, and a guiding system helps feed small workpieces into the machine. Edge thickness (coil): 0.4 – 3 mm (material dependent) Pjdpfox Emf Djx Adyspl Edge thickness (strip): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet for both EVA and PUR adhesives, minimal effort required. Processes all common edge types including high-gloss & super matte, as well as solid wood edging up to 15 mm. iTronic – pressure and adhesive quantity control system Pre-configured for integration with a RETURN system Motor-driven pressure bridge with top belt drive Multifunction units for rapid setup of radius, flush, and bevel trimming Vertical and horizontal spraying units and much more.