Transportne Trakove nakup rabljenega (4.389)

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: CD1500, CD-1500 STROJ ZA KOCKANJE VOĆA I POVRĆA Ovaj stroj je namijenjen za rezanje, kockanje i sjeckanje voća i povrća poput krumpira, mrkve i cikle na trakice, ploške ili kockice. Zamjenjivi rezači omogućuju odabir oblika i veličine narezanih komada, čime se osigurava ujednačen rezultat. Dodatni setovi alata dostupni su za manje ili veće rezove po potrebi. Voće i povrće ručno se umeće u lijevak, a narezani komadi izlaze u spremnik za prihvat. Ppodpjvlwlcofx Adyol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Prodajam popolnoma opremljen robni lepilni stroj HOMAG KAL370 AMBITION 2280, letnik 2015: Konfiguracija: Vhodni naslon ročno nastavljiv Združevalna rezkala ročno nastavljiva Lepljenje robov s predgrevalnim rezervoarjem Cona za pritisk materiala ročno nastavljiva Krožne žage pneumatsko nastavljive Radii rezkali zgoraj in spodaj ročno nastavljivi Podpfjxnbx Isx Adyopl Krožna glava s 4 motorji ročno nastavljiva Radialni potegni nož R2 pneumatsko izklopljiv / drugi komplet R1 vključen Ravna strgala Polirne ščetke Separacijsko brizganje spredaj Čistilno brizganje zadaj Delovna višina ročno nastavljiva Višina materiala 8–60 mm Debelina robnega materiala 0,4–20 mm Podajalna hitrost do 20 m/min Skupna dolžina z vključenim podajalnikom 7860 mm Stanje prevoženih metrov: 2.926.000 m zlepljenih Vključena popolna dokumentacija in CE-serifikat. Stroj je v zelo dobrem stanju, popolnoma funkcionalen!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna masa: 915 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 24 A, vhodna frekvenca: 50 Hz, Work table dimensions: 3465 x 710 mm, height: 875 mm Edge band thickness for roll edges: 0.4 – 3 mm Edge band thickness for strip edges: up to 5 mm Min. – max. workpiece thickness: 8 – 50 mm Min. workpiece length/width with roll edges: 190/110 mm Minimum panel length: 120 mm Feed speed: 9 m/min Feed motor: 0.55 kW Working pneumatic pressure: 6.5 bar Psdouacqzjpfx Adyjpl Extraction hood glue pot: 80 mm 2 extraction hoods, flush trimming unit: 60 mm 2 extraction hoods, pre-milling unit: 80 mm Working temperature: 20–190°C Equipment: Pre-milling unit (jointing) Corner rounding unit (corner copying) Gluing unit, applying and pressing the edge (self-lubricating glue pot) End trimming unit for trimming the projecting edge front and rear at 90° Flush trimming unit (jointing) Scraper unit Buffing unit Flat scraper Automatic application of strip edges with edge magazine Quick-change kit for glue pot Device for plate edge heating Anti-adhesive spray unit Spray device for final edge finishing

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banders for bonding and processing flat edges using coil materials (melamine, PVC, ABS, veneer) and strip materials (solid wood, laminate, knife-cut veneers, etc.) • NC control with touchscreen • Automatic start of aggregate motors • Direct selection for second pass • Production data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material *): 0.4–10 (12) mm Workpiece projection: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air connection: 7 bar Glue pot capacity: 2 (approx.) kg *Depending on configuration. - GLUING UNIT VC-511 Applies hotmelt adhesive to the workpiece, feeds the edge material to the workpiece, automatically trims it from the coil, and presses it in place for optimal positioning. - TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a maximum thickness of 3 mm. JOINTING UNIT RT02 Joints the workpiece prior to glue application. Fitted with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing of thick PVC/ABS edges. FLAT SCRAPER UNIT RC02 For removing excess glue at the joint area between edge and panel. Equipped with tracing rollers and a straight knife with insertion control. BUFFING UNIT SZ02 Ppedpfoxzb Iiox Adyel For cleaning and buffing the workpiece edges with cloth polishing discs. The unit automatically adapts to workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of release agent via injectors actuated by CNC control. KIT PRO-GLUE The PRO-GLUE kit consists of the following components: • TEKNO-GLUE system for optimum gluing, featuring: - controlled glue roller pressure - automatic retraction during feed stops - automatic ON/OFF of glue section REVERSE system for glue roller operation in forward or reverse mode. Electrical and mechanical provision for the use of special glue pots for POLYURETHANE adhesive on machines configured for EVA glue. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tools according to edge type or thickness, controlled via the CNC. Pair of multi-profile cutters for the fine trimming unit: Bevel cutter 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the sensor relative to edge thickness, controlled via the CNC. Allows activation of corner-only processing. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools according to edge type or thickness, controlled via the CNC.

Stanje: dober (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 020313L, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, pritisk: 7 letvica, Description: Solid steel construction for high machine stability. Workpieces are conveyed on a smooth-running transport chain with plastic plates. The top pressure unit is equipped with two rows of rubber-coated rollers. Manual adjustment of the top pressure, with automatic positioning of the processing units according to the changed workpiece thickness. Mechanical digital display for panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3mm edging material. Support plate for edging rolls with a diameter of up to 800 mm. Central extraction system. Roller track as workpiece support along the entire machine length. Protective hood over all processing units. Control panel, including emergency stop button and lockable main switch. Transformer for 24V auxiliary circuit. Pre-milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable stopper at the infeed. Maximum material removal: 2 mm. 2 motors, each 1.1 kW, 12,000 rpm, maximum material removal 2 mm, extraction diameter 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with rapid heating and glue application roller. System for temperature control and recycling of excess hot-melt adhesive. Power consumption: 3.5 kW, capacity: 1.5 kg, heat-up time: approx. 15 min, depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming the front and rear overhanging edges at a 90° angle, flush with the workpiece. Trimming of the front and rear overhangs is individually controllable as required. Motor: 0.35 kW Saw blade speed: 12,000 rpm. Flush trimming unit With 2 motors for milling radii or chamfers at the top, bottom, and/or front edge. Vertical and horizontal adjustment of the motors on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motors not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, each 0.55 kW, 12,000 rpm. Diamond cutting tools, 68 mm Z6, R=2. Profile scraping unit Flat scraping blade Buffing unit Form trimming unit With 0.22 kW, 12,000 rpm, prismatic linear guide. Max. panel thickness: 50 mm Max. edge material thickness: 2 mm Technical data: Edging strip thickness (for manual feed) max.: 5x45 mm Pre-milled panel thickness: 10 – 40 mm Unmilled panel thickness: 10 – 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°–210°C Feed speed: 8 m/min Inverter: 200 Hz Podpfxsxn Hzbe Adyjpl Compressed air: 7 bar Extraction socket diameter: 2x 60 mm CE standard

Stanje: dober (rabljeno), Leto izdelave: 2002, Edge banding machine with jointing milling unit; otherwise fully equipped. PU glue can be used. Ppsdpfx Ajgmn H Aedyol

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 200.12.010.13, leto zadnje generalne obnove: 2024, The machine will be available for collection from April. The machine is still operational and can be inspected while running. Technical Data: - Control unit with 10.4" colour touchscreen - Extendable workpiece support - Motorised, position-controlled pressure beam - Chain feed with 12 m/min feed speed - Roller support disc, diameter 760 mm - Dual-motor jointing milling unit - Edge feeder for coil and strip material, 0.4 – 5 mm Ppedpfx Adotvfihjyol - 2 exchangeable glue application units for EVA - 1 exchangeable glue application unit for PUR - Motorised, position-controlled pressure unit - Dual-motor end trimming unit - Dual-motor multifunctional unit for radius, flush, and bevel milling - Corner rounding unit - Profile scraping blade - Dual-motor polishing unit (buffing wheel) - Spray unit for release agent at machine infeed - Spray unit for cleaning agent before the polishing unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, - Debelina obdelovanca do 60 mm - Debelina robnega traku do 3 mm - Pomik: 16 - 20 m/min Pedpfxew R T Alo Adyjpl - Skupna dolžina: 9365 mm - Powercontrol PC23 Agregati: - Agregat za nanašanje ločilnega sredstva zgoraj/spodaj - Spojni rezkar 2x 3kW - Lepljenje z 2 koluta zaloge - Kapalni agregat HL 81 0,8kW - Predrezilni agregat FF30 spodaj/zgoraj; 4x 0,4kW - Prostor za 2 dodatna agregata - Profilna strgala PN 10 - Površinsko strgalo - Agregat za nanašanje čistila - Gladilni agregat

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, - HOMAG Power Edge gluing unit Ppedeub Rw Sjpfx Adyjl - removed from HOMAG BAZ 211 Venture

Stanje: rabljeno, Leto izdelave: 1983, Rabljeni stroj Leto izdelave: 1983 Za predpremazan robni material Robni material do 1,3 mm Z valjčnim rezanjem Z rezanjem z nožem na poravnano Z rezkanjem na poravnano/posnetjem zgoraj/spodaj z HF motorji Pedpsxc Rl Hofx Adyopl Lokacija: Röllbach Razpoložljivost: kratkoročno

Stanje: novo, Holzkraft minimax me 35 t s edge banding machine 5507235 For plastic edging from 0.4 - 3 mm, solid wood edging up to 5 mm, and workpieces from 8 - 50 mm Top configuration for high productivity with minimal space requirements! Intuitive operation with the eye-S control and large 10" touchscreen: HMI Maestro Active Edge; graphical display of all processing units and their operating status; graphical simulation of machining operations; control of all machining units; regulation of glue pot temperature; assistance functions for machine setup according to the machining program; error diagnostics for rapid resolution of simple faults; statistics on processing parameters; USB port; prepared for network connection. Excellent accessibility to the working units thanks to the large hood, which ensures protection and noise reduction Monoblock steel frame construction guarantees high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Automatic application of strip edging with edge magazine (me 35 t s): solid wood strips are automatically loaded and synchronized with the panel feed Ppjdpfx Aekknbqsdyjl Panel feeding by chain conveyor with rubber-coated glide shoes Extendable workpiece support Quality Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 3314 mm Width/depth (product) approx. 1085 mm Height (product) approx. 1300 mm Weight (net) approx. 545 kg Flush radius trimming unit Flush radius trimming unit power 2 x 0.35 kW Flush radius trimming unit cutter diameter carbide 55.3 mm Flush radius trimming unit cutter speed 12,000 rpm Flush radius trimming unit extraction port diameter 2 x 60 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Glue unit Glue pot power 0.25 kW Glue pot operating temperature 190°C Glue pot extraction port diameter 60 mm Glue pot filling capacity 0.8 kg Pneumatic connection Operating pressure 6.5 bar Feed Feed unit power 0.55 kW Feed speed 7 m/min Edging Edgeband thickness, coil material 0.4–3.0 mm Edgeband thickness, strip material 0.5–5 mm Pre-milling unit Pre-milling unit extraction port diameter 2 x 80 mm Pre-milling unit power 3 kW Pre-milling unit cutter speed 7,200 rpm Pre-milling unit diamond cutter diameter 80 mm Pre-milling unit cutter height 56 mm Pre-milling unit material removal 0.5 / 1 / 1.5 / 2 mm Scraper units Radius scraper 2 mm Buffing unit Buffing unit power 2 x 0.14 kW Buffing unit speed 2,800 rpm Workpiece Workpiece thickness 8–50 mm Workpiece length min. 120 mm Workpiece width min. 110 mm Holzkraft authorized dealer – Accessories available on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Klein – Edge Banding Machine KTD51 for Profile Strips and Straight Edges, with Direct Glue Application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, Edge thickness: 0.5 – 1 mm, inner radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable 4 – 9 m/min, 2.6 kW, 400 Volt. Ppjdpfxovf H I Ts Adyjl

Stanje: pripravljen za uporabo (rabljen), V zelo dobrem stanju. Podpsvunm Ajfx Adyspl

Stanje: novo, Leto izdelave: 2024, New machine Ppedow I U Rfspfx Adyol Year of manufacture: 2024 Features and technical specifications: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support, 600 mm Extension for telescopic support arm Standard infeed fence 3 LED lights at infeed Jointing unit, twin-motor DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Fully automatic edge feeder 1903 Glujet 301 adhesive application unit Automatic reloading function Reserve hopper for 1.4 kg cartridges (4 cartridges) GluJet collection container Pneumatic pressure unit 1912-3 Spray unit GM 201 after pressure unit Pneumatic end trimming unit 1918 Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters, R=2 mm Profile trimming unit 1832 Shelf board programme Radius scraper blade ZK 301 Chip collection box Flat scraper blade FK 701 Front and rear spray unit TR201 Buffing unit 1940 Availability: short notice Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 220.01.016.22, hitrost pomika os X: 18 m/min, višina obdelovanca (maks.): 60 mm, premer vrtljive mize: 750 mm, največja hitrost vrtenja: 12.000 obr/min, The machine is being auctioned due to the closure of operations! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edgeband material (coil): 0.4–3 mm Rotary table diameter for coiled edge material: 740 mm Workpiece infeed support surface: 600 mm Spindle speed, diamond jointer unit: 12,000 rpm Feed rate, chain conveyor: 10 and 18 m/min Cross-cut saw unit speed: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical Data Voltage: 400.0 V Phases: 3 Podpfx Adoxwt Nqoyjpl Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW FEATURES Ball bearing rotary table for coiled edge material Workpiece infeed and infeed fence with manual adjustment Chain feed with two feed rates Edge feeder for both coil and strip material, single feed Upper and lower multifunctional milling units with x-motion PLUS via smartouch Upper and lower radius scraper blade, x-motion PLUS Corner processing unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing unit Pneumatic-mechanical retract safeguard for workpiece spacing control glueBox application unit

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 20 mm, višina izdelka (maks.): 60 mm, največja širina izdelka: 55 mm, TECHNICAL DETAILS Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA Jointing cutter: yes Multifunction unit: yes Number of working units: 8 Panel thickness: 12 - 60 mm Panel width: min. 55 mm Edge thickness: 0.3 - 20 mm Feed speed: 24 m/min Pressure: rubberised belt Panel guidance Panel support guidance: yes With NC positioning: yes Mounted units in the sizing section Unit: Corrections Automatic engagement by time: yes Additional systems Edge pre-heating lamps: yes Coil magazine: yes Number of positions: 2 Glue pot for hot-melt glue: yes Hot-melt pre-fuser: HOT MELT A34 Edge pressure roller track: yes Mounted units in the edge processing section Number of units: 6 Unit 1: End trimming unit Manufacturer model: HL 81 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Unit 2: Top milling unit Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Unit 3: Multifunction unit Manufacturer model: FK 13 Number of motors: 2 Automatic tool change: yes With NC positioning: yes Processing speed: 20 m/min Motor power: 0.4 kW Speed: 12,000 rpm Ppsdpfjv Eakhox Adysl Unit 4: Edge scraper Manufacturer model: MN 21 With NC positioning: yes Unit 5: Glue scraper Unit 6: Buffing unit Number of motors: 2 Motor power: 0.18 kW Speed: 14,000 rpm Additional systems Spraying unit: RIEPE LP 163/93 Control system: PC 22 CE marking: yes

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 24 m/min, največja debelina roba: 3 mm, višina izdelka (maks.): 60 mm, višina izdelka (min.): 10 mm, dolžina izdelka (min.): 150 mm, največja širina izdelka: 3.200 mm, širina izdelka (min.): 100 mm, TECHNICAL DETAILS Type of applied edge: thin edge, thick edge Adhesive system: EVA Joint trimming: yes Multifunctional unit: yes Number of working units: 8 pcs Software: SINTRA Feed speed: 25 m/min Panel dimensions Panel height: 10 - 60 mm Panel length: min. 150 mm Panel width: 100 - 3,200 mm Edge thickness: 0.3 - 3 mm Ppjdpfov Eabajx Adyel Panel guidance Panel support guide: yes With NC positioning: yes Angled panel feed system: yes Installed units in the sizing section Unit: Corrections Manufacturer/Model: RT30 Automatic timed engagement: yes Spindle speed: 9,000 rpm Edge processing systems Edge preheating lamps: yes Coil magazine: yes Number of positions: 6 Adhesive system: yes Hotmelt gluepot: yes Hotmelt pre-fuser: yes Pre-fuser model: HM20 Edge pressure roller conveyor: yes Number of pressure rollers: 4 With NC positioning: yes Installed units in edge processing 1-6 Unit 1: End trimming Manufacturer/Model: IT90-S Processing speed: 28 m/min Spindle speed: 12,000 rpm Unit 2: Edge trimming router Manufacturer/Model: RF10 Spindle speed: 12,000 rpm Unit 3: Multifunctional unit Manufacturer/Model: AR30 Automatic tool change: yes Processing speed: 18 m/min Spindle speed: 12,000 rpm Unit 4: Edge scraper Manufacturer/Model: RB40 With NC positioning: yes Unit 5: Glue scraper Manufacturer/Model: RC20 Unit 6: Buffing unit Manufacturer/Model: SZ30 Spindle speed: 1,400 rpm Additional systems Spraying unit: yes CE marking: yes MACHINE DETAILS Installed total power: 25 kW Feed and return system Feed speed: 24 m/min Panel return for edge bander: left Panel ejection: transfer roller conveyor Panel feed: motorized belt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Robna lepilka Proizvajalec: Biesse Tip: Akkron 440 Leto izdelave: 2011 Ppodpoxtnb Tjfx Adyjl Debelina obrobe: 0,4 - 3 / 10 mm Debelina obdelovanca: 10 - 60 mm Podajalna hitrost: max. 18 m/min Skupna moč: 13 kW Višinsko nastavljanje: električno Teža stroja: ca. 2.000 kg Enota za spajanje (frezanje): Da Enota za odrezovanje: Da Enota za profilno in ravno rezkanje: Da Enota za kopiranje robov: Da Rezilo za radij: Da Škropilna naprava: Da

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Stroj za lepljenje robov Proizvajalec: Felder Tip: Tempora 60.06, F600 Leto izdelave: 2019 Popolnoma avtomatsko upravljanje iz nadzorne plošče. Enota za spajanje: Da Enota za odrezovanje: Da Pedpfoxix Hxex Adyjpl Enota za rezkanje radijev: Da Rezilo za vlečenje radijev: Da

Leto izdelave: 2018, Stanje: zelo dobro (rabljeno), I am selling a washing machine for sanding belts used on wide belt sanding machines, NETEK Denmark. Psdpfx Adjw Ancxeyopl Working width up to 1350mm. Designed to extend the lifespan of sanding belts. Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, I am selling a fully equipped edge banding machine BRANDT Optimat KDF 440 C, year of manufacture 2015: Configuration: - Infeed fence adjustable via servomotor Psdewun Irspfx Adyspl - Pre-milling unit adjustable manually - Edge banding unit with EVA adhesive / Airtec System Schugoma - Pressure zone for material adjustable manually - End trimming saws adjustable pneumatically - Top and bottom radius milling adjustable via servomotor - Two-motor corner rounding unit adjustable manually - Radius scraper R2 switchable pneumatically - Flat scraper switchable pneumatically - Polishing brushes - Separator and cleaning spray units at infeed and outfeed - Control panel Working height adjustable via servomotor Material thickness: 8-60mm Edge material thickness: 0.4-8mm Feed speed: 11 m/min Total length including infeed table: 5573mm Total weight: 1860kg Only 592,198 meters processed. Very good condition, fully functional! Complete documentation and CE certificate included. Available immediately.

Stanje: dober (rabljeno), Leto izdelave: 2002, I am selling a HEBROCK AKV 088D edge banding machine for shaped parts. Year of manufacture: 2002. Suitable for curved components. Good condition, inspection possible! It is also possible to additionally purchase the HFF08 radius milling unit. Psdpevx D Auofx Adyopl

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 6900 x 1750 x 1660 mm Weight: 450 kg Total Power Consumption: 4.5 kW Block Bandsaw BLOCKMAX 550 - Max. log diameter: 550 mm - Max. board width: 530 mm - Max. bandsaw stroke: 540 mm - Min. bandsaw stroke: 20 mm - Max. cutting depth: 220 mm - Max. cutting length: 6 m - Min. cutting length: 900 mm - Bandsaw motor: 4.0 kW - Height adjustment motor: 0.12 kW - Voltage: 400V / 50Hz - Bandsaw wheel diameter: 400 mm - Wheel width: 25 mm Psdpovz Exiefx Adyjpl - Bandsaw blade size: 3200 x 27 x 0.9 mm - Kerf: 1.5 – 2.2 mm - Bandsaw cutting speed: 15 m/s - Includes electric height adjustment - Includes manual log turner - Dimensions: L = 6900 mm, W = 1750 mm, H = 1450/1660 mm - Weight: 450 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 1480 x 760 x 1160 mm Weight 180 kg Total power requirement 3.5 kW Edge sanding machine KOS-2600 ECO - Table size: 750 x 300 mm - Sanding belt dimensions: 2600 x 150 mm - Sanding belt backing: 850 x 200 mm - Belt speed: 20 m/sec - Table stroke up to 200 mm - Oscillation motor power: 0.25 kW - Main motor power: 3.0 kW Ppedpfjvz Hppsx Adyjl - Extraction connection: 100 mm - Separate oscillation drive with geared motor - Height-adjustable cast iron table, double column-guided - Dual extraction mechanism for main sanding unit and round sanding table - Sanding unit steplessly tiltable up to 45° - Graphite-coated sliding surface - Including mitre fence with angle scale - Including extendable table extension with multi-roller system - Including sanding belt - Dimensions: L=1480, W=760, H=1160 mm - Net weight: 180 kg - Gross weight: 230 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 860 x 1060 x 1060 mm Weight: 280 kg Total Power Requirement: 3 kW Edgebander CONTOUR 350 DELUXE - Motor power: 0.4 kW - Heating power: 2.2 kW - Feed speed continuously adjustable: 0–14 m/min - Voltage: 400 V / 50 Hz - Minimum workpiece thickness: 10 mm - Maximum workpiece thickness: 40 mm - Edge thickness: 0.3–3 mm - Edge width: 15–50 mm - Compressed air connection: 6 bar - Minimum inside curve radius: 20 mm - For gluing curved edges - Glue application on straight and curved edges Ppjdovz En Repfx Adyjl - Glue applied on both the workpiece and edging - Automatic length cut-off - Glue temperature continuously adjustable electronically - Installation dimensions: 1600 x 1150 x 965 mm - Transport dimensions: L=860 mm, W=1060 mm, H=1060 mm - Net weight: 280 kg - Gross weight: 340 kg