Transportne Trakove nakup rabljenega (4.158)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 1.300 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, Oprema: CE označba, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Unit for panel sizing 1 Unit: Trimming Model: RT30 Motor power: 3.5 kW Max. speed: 9,000 rpm Edge processing unit 1 Unit: End trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction unit Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge processing unit 4 Unit: Edge scraper Model: RB40 Edge processing unit 5 Unit: Glue scraper Model: RC20 Edge processing unit 6 Unit: Brush Model: SZ30 Number of motors: 2 Bljdpexw T Tpsfx Aa Rsi Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Total installed power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing milling unit Multifunction unit Top pressure Pressure by rubber-coated belts Panel support guide Panel positioning by NC Angled panel infeed system Automatic time-based engagement Edge preheating lamps Coil magazine Hotmelt glue pot Prefuser for hotmelt Edge pressing roller track Spraying unit Machine programming software: SINTRA Panel ejection via transfer roller conveyor Panel feed by motorized carpet Edge banding machine return conveyor, left CE marking

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 40 mm, največja debelina roba: 6 mm, hitrost pomika os X: 11 m/min, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Minimum panel height: 8 mm Maximum panel height: 40 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 6 mm Max. rotational speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format trimming Unit: Corrections automatic engagement by timer Motor power: 2.2 kW Edge preheating lamps Coil magazine No. of spool positions: 1 Gluing system Glue pot for hot-melt adhesive Edge pressure roller section No. of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 automatic engagement by timer Motor power: 0.18 kW Max. rotational speed: 12,000 rpm Edge processing unit 2 Unit: Top and bottom trimming Number of motors: 2 Motor power: 0.27 kW Max. rotational speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Max. rotational speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT PC 16 control system CE marking Blsdpfx Ajxw Ttvja Rei

Stanje: rabljeno, Leto izdelave: 1994, for pre-glued edges including a large quantity of edge material with double-sided cantilever end cap station 3-roller feed used, in good condition Make: Hebrock Model: AKV-83 Year of manufacture: 1994 Edging thickness: 1.0 mm Max. workpiece height: 50 mm Min. workpiece width: 50 mm Min. workpiece length: 170 mm Blsdpfxovwfzve Aa Roi Space requirement: approx. 1700 mm x 690 mm x 500 mm Location: 97447 Gerolzhofen, free loaded on truck, unpacked Handover in as-inspected condition without warranty or guarantee

Stanje: novo, Edge thickness up to 3 mm Total length 4,122 mm Feed speed 10 m/min with PLC control (including touchscreen) and hot-melt glue application indication to the workpiece for tape material up to 3 mm Jointing cutter (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation end trimming unit, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable profile cutter (combination version), corner rounding unit, surface scraper (including pneumatic lift), vacant station (for cleaning station or radius scraper), sturdy chain drive, double roller pressure beam with ball bearings, viewing window from the rear of the machine, extendable workpiece support, approx. 10 m/min feed speed. Art. No. F4/00/11 - Whispercut jointing head F4/500/10 - Combination profile cutter head F4/500/20 - Radius cutter R=2mm F4/500/2 - Corner radius cutter R=2mm F4/08/2 - Quick-change device for corner rounding unit F4/08/4 - Radius scraper (incl. pneumatic lift) F4/09 - Radius scraper R=2mm F4/09/2 Blodpfx Aaovwd Uue Rsi - Chassis F4/10 - Pneumatic 3-point adjustment (radius, chamfer, flush milling) F4/30

Stanje: novo, - New - Description: - Premium features for high productivity in a compact footprint! - Intuitive operation with the eye-S control system and large 10" touchscreen: HMI Maestro Active Edge. Features include graphical display of all machining units and their operating status, graphic simulation of machining processes, control of all machining units, glue pot temperature regulation, setup assistance as per the processing program, error diagnostics for rapid troubleshooting, machining parameter statistics, USB interface, network connectivity ready, and Industry 4.0 readiness with API REST data transfer protocol. - Outstanding accessibility to all working units thanks to the large hood, providing protection and noise reduction. - Monoblock steel construction ensures maximum machine stability and rigidity. Bodevwfmlepfx Aa Roli - Automatic unit positioning when changing panel thickness. - Automatic feed of strip edges with edge magazine (me 35 t s): Solid wood strip edges are auto-loaded and synchronized with panel feed. - Panel feed via chain conveyor with rubber glide shoes. - Extendable workpiece support table. - Infeed fence adjustment by spacer plates. Technical Data: Dimensions and Weight Length: approx. 3314 mm Height: approx. 1300 mm Width/Depth: approx. 1085 mm Weight: approx. 545 kg Flush/Radial Milling Unit Motor power: 2 x 0.35 kW Spindle speed: 12,000 rpm Cutter diameter (carbide-tipped): 55.3 mm Extraction port diameter: 2 x 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue Unit Glue pot motor power: 0.25 kW Glue pot extraction port diameter: 60 mm Working temperature: 190°C Glue pot capacity: 0.8 kg Pneumatic Connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed motor power: 0.55 kW Feed speed: 7 m/min Edges Edge thickness, rolls: 0.4 – 3.0 mm Edge thickness, strips: up to 5.0 mm Pre-Milling Unit Motor power: 3 kW Diamond cutter diameter: 80 mm Material removal: 0.5 / 2 mm Spindle speed: 7200 rpm Cutter height: 56 mm Extraction port diameter: 2 x 80 mm Scraper Units Radius scraper: 2 mm Buffing Unit Motor power: 2 x 0.14 kW Speed: 2800 rpm Workpiece Workpiece thickness: 8 – 50 mm Minimum workpiece width: 110 mm Minimum workpiece length: 120 mm Item No. 5507235

Stanje: rabljeno, Leto izdelave: 1988, Used, good condition Manufacturer: Brandt Type: F10 + EK 11 - End Trimmers Year of manufacture: 1988 Machine no.: 0-260-01-2188/0-260-01-2746 Required space: approx. 1100 mm x 1100 mm x 1700 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Blsdpfxjvwf Txj Aa Rsi Transfer in present condition as inspected, without refurbishment, without warranty or guarantee

Stanje: rabljeno, Leto izdelave: 1993, with pre-milling used, good condition Manufacturer: Ott Model: Kantomat 156-FÜ Year of manufacture: 1993 Edgebanding thickness: 15 mm Workpiece height min. 10 mm / max. 60 mm Workpiece width min. 60 mm Workpiece length min. 60/160 mm Bljdpfx Ajvwfyfja Rji Thick edges up to 3 mm Edgebanding from the coil up to 3 mm Pre-milling Sawing unit K 14 / 2 x 1.1 hp Flush trimming HF15.1 2 x 1.5 hp Chamfering 082 2 x 0.8 hp, swiveling 0-45° Radius trimming 2 x 0.8 hp Radius scraping blade, pneumatically controlled Buffing, oscillating, pneum., with pneumatic feed 2 x 0.3 hp automatic edge magazine Infinitely variable feed speed Granulate quick-heat tank Sound protection hood Large roller support Extraction connection D 160 mm Required space approx. 7400 mm x 1000 mm x 1600 mm Total connected load 22 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Edge banding machine Manufacturer: IMA Model: Quadromat 3512 U Year of manufacture: 1999 Edge material: veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Edge thickness: 0.4–12 mm Speed: 18,000 rpm End trimming unit Milling units Profile scraping knives Blsdpfx Ajv T R Erja Rsi Buffing unit Flat scraping knives

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Working width: 707 mm, working height infeed/outfeed: 1220 mm / 1100 mm, operating temperature: 60°C, material: stainless steel, belt material: plastic, belt length and width (lower): 14,000 mm / 820 mm, belt length and width (upper): 8,500 mm / 820 mm, reducer power: 1.5 kW, pump power: 2.2 kW, additional bridge reducer power: 0.55 kW, machine dimensions (L/W/H): approx. 6,750 mm / 1,810 mm / 3,500 mm. Documentation available. On-site inspection is possible. Bsdpfx Asu S I Hfsa Rjli

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Type of adhesive: PUR adhesive, glue application system: cartridge-based, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16 m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Includes various spare parts and return conveyor Ligmatec. Documentation available. On-site inspection possible. Bljdpfeugmw Eex Aa Rji

Leto izdelave: 1995, stanje: nepreverjeno (rabljeno), Connected load 380V 55A PMS control unit Blodpfenxkm Eox Aa Rji Pre-milling unit 1961 Magazine 1901 Gluing station 1906 Pressure unit 1926K End trimming unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm radius up to 15 mm flush Radius scraper 1927 Form milling unit 1983 Buffing unit 1941 Extraction ports 1x160, 1x125 mm Compressed air connection 6 bar

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 3750, Funkcionalnost: popolnoma funkcionalen, The machine glues solid wood up to 18.0 mm as well as rolled materials up to 3.0 mm. Trims roll material up to 3.0 mm thick (PVC, ABS, and real wood up to 2.0 mm). Flush trimming up to 18 mm. Rounding and chamfering milling stations. Total length: 3.20 m Power consumption: 7.1 kW Glue pot Cross-cut shears Infinitely variable feed speed Trimming saw for front and rear edges Flush trimming unit Rounding milling unit Blsdpfx Aasigad Es Rsi Chassis Extraction connection: 100 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 558/0-112, Funkcionalnost: popolnoma funkcionalen, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feeding 1901 Tracing nozzle Pressure unit 1913 MOT End trimming unit 1918 Bsdoh Uyg Eepfx Aa Reli Milling unit 1942 top Milling unit 1942 top/bottom for radius milling Scraper 1929 Profile milling unit 1983 Flat scraper 1964 Buffing unit 1944 Length approx. 5900 mm Connected load 21.4 A

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1993, številka stroja/vozila: 869/9-302, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 21A Edge magazine Gluing station 1906 Press unit 1914 Cross-cut saw unit 1976 Blsdpfjiamufox Aa Roi Rounding milling unit 1943 Rounding scraper 1927 Buffing unit 1944 Control panel (top) Extraction nozzle D=100 mm Operating manual No interchangeable unit for flush milling

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1991, Power supply 400V / 11kW Extraction connection Ø 1x100 mm Bsdpfx Aoiw D Udja Reli Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, Length 4425 mm, Height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, coil material 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Pressure unit 1914 End trimming unit 1976 Flush trimming unit 1942 Radius trimming unit R2 1943 Scraper 1927 Buffing unit 1944

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 315/0-110, Funkcionalnost: popolnoma funkcionalen, Control panel upper Edge feeder 1902 Glue application station 1906 Cut-off shear 1902 Press station 1816 Cutting unit 1918 Milling unit 1942M Rounding scraper 1929 Profile milling unit 1983 Flat scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Bjdsh Ux Suepfx Aa Roli Length approx. 5300 mm

Leto izdelave: 1990, stanje: rabljeno, Power connection: 400 V, 3 kW Glue roller Milling unit: 2x flush trimming Edgebanding material up to 0.4 mm Dimensions (LxWxH): 3150 x 680 x 1250 mm Weight: approx. 400 kg Bljdpekkfk Nefx Aa Roi Conversion to 2 mm PVC edging possible (surcharge: €1,000.00)

Stanje: rabljeno, Leto izdelave: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Bjdpfxsrnkw Do Aa Rsli Year of manufacture: 2006 Machine No.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Fence ruler: Adjustable fence ruler 700.080 Infeed table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application station: 04.0832 Bonding unit: 04.1570 PU pre-melter: 283.203 High-speed tool holder: For high-speed motors Cut-off unit: 08.42 Milling unit: 08.0555 Multi-processing unit: 08.348 Multi-profile scraping blade device: 08.516 Flat scraper: 08.517 Corner copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety features: Light barriers, temperature controller, control terminal Additional equipment: Upstream roller conveyor table Total machine length: approx. 11/16 m Extraction system: Included Accessories: Edge magazines: 2 sliding magazines for edge rolls, each holding 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Control cabinet Panel return system (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, varying table lengths Round belt conveyor table Control cabinet system 2 angle transfer tables Peripheral equipment for edge processing line: Consisting of: Interface system Barcode scanning system

Stanje: rabljeno, Leto izdelave: 1992, Domet 1800 mm Višina obdelovanca 750 mm Potezna dolžina 4000 mm Širina mize 5500 mm Tehnični podatki so podatki proizvajalca oz. upravljavca in so za nas nezavezujoči. Pridržujemo si pravico do predhodne prodaje; izključno veljajo naši poslovni in prodajni pogoji. O nas več kot 400 lastnih strojev na zalogi preko 15.000 m² skladiščne površine, žerjavna kapaciteta 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoje podjetje, Bjdpfx Ajytx Nvea Rjli nas kontaktirajte. Več ponudb najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: novo, Pneumatic Strip Nailer 6512/130 SQ for nails up to 130 mm length Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battening, crate and pallet construction, fence construction, load securing, etc. • Sequential trigger • For paper-collated safety strip nails • Eurocode 5 nails according to DIN EN 14592 • User-friendly depth adjustment • Robust and high impact • Optimally sound-dampened and well-balanced Technical data: Bjdpfx Asvcl Slea Rsli • Trigger type: Sequential trigger • Air consumption per drive: 5.40 liters • Nail lengths: 90 to 130 mm • Nail diameter: 3.4 – 4.2 mm • Nail type: 34° safety strip nails • Magazine capacity: 75 nails • Weight: 6.60 kg • Dimensions (L x W x H): 470 x 150 x 460 mm The nailer is new and unused. Only minor showroom wear may be present as the tool was on display. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer – NO PAYPAL! If you have any questions, please feel free to contact us.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širina prehoda: maks. 150 mm Višina prehoda: maks. 5,0 mm Bledpfx Asxg Rxuea Rsi Drugo: Primerno za rezanje štancanih rešetk Upravljanje preko bata preše, povratek preko vzmeti

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN-No.: 88.04.017 D, 8 pieces of very clean (refurbished) Jakob Müller Frick AG NF42 looms from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% operational (completely overhauled). 12 shafts, without magazine, with Mütrans, some with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Item No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, completely overhauled, from 1990 at €6,500 each Item No.: 90.01.704 B Item No.: 90.01.755 A Item No.: 90.01.229 A 1 unit NF 2/84mm, completely overhauled, from 1989 for €6,500 Item No.: 89.00.118 D 3 units NF 2/84mm, completely overhauled, from 1988 at €6,500 each Item No.: 88.04.244 A Item No.: 88.02.758 A Item No.: 88.02.758 B The machines come from a curtain tape production line and were originally equipped with a Z compartment. As part of the general overhaul, they have been converted to standard compartments. All tension trees and pressure rollers have been newly vulcanized by Westland. Card rollers in the chain box are new or newly vulcanized. The central lubrication system in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines are fitted with Mütrans II. Individual machines with double-belt take-off (for heavy-duty fabrics) can be delivered upon request. I believe this is possible for 4-5 machines. Finely knurled tension trees can also be installed for 4-5 machines as an option. All needle holders are suitable for double needles. Two additional Mütrans II units can be installed for this purpose upon request. Blodpfx Aaor Ix Igj Roi The machines have been rebuilt from scratch. All bearings, shafts, and bushings have been inspected and replaced as necessary. All swing arms have been checked and replaced if required. Installed: - 1st shaft free (spacer block installed) - 2nd and 3rd shaft: swing arm 201 - 4th–6th shaft: swing arm 202 - 7th–9th shaft: swing arm 203 - 10th–12th shaft: swing arm 204 - 13th shaft: swing arm 205 All shaft springs have been checked and replaced where needed. There are no porous, cracked, or defective parts. The electrical system has been checked, the circuit board for thread monitoring has been inspected and, if required, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and undamaged. The machines are offered without Müdata. Four units are additionally equipped with crawler gears. The machines have been set up and tested. Note: Machines are supplied without oil, yarns, slats, reeds, needles, and chain links. Delivery on Euro pallet, FOB Wuppertal.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces, flush trimming unit with VR function, HF milling unit, chain feed, double roller upper pressure, and extendable workpiece support rail. Suitable for ABS and PVC edge banding rolls, as well as fixed lengths from 0.4 to 2.0 mm and workpiece heights from 8 to 50 mm. Feed speed: 5.5 m/min • 2 free spaces for finish units • 5.6" color touch screen • Automatic edge feeding for roll material via rotatable reel table D=600 mm • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters guarantee clean and tear-free jointing of the workpieces before edge application. • Teflon-coated glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue burn-off if the machine remains switched on but is unused for extended periods). (Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change). • Pressure zone consisting of a powered pressure roller operating synchronously with the glue roller, and an adjustable pressure roller with spring tension, ensuring a strong joint between the edge material and the workpiece, adjustable via SIKO display. • Flush trimming unit for front and rear workpiece edges, including VR function (for vertical curves), HF motor 0.27 kW / 12,000 rpm, automatic tracing on the workpiece, with extraction hood • High-frequency combination milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special cutters, suitable for radius and chamfer trimming, horizontal and vertical workpiece tracing, unit adjustment with digital counters for different edge types, height adjustment of the upper unit via upper pressure. • 5.6" color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is idle, activation/deactivation of units, and error diagnostics. • LED lighting in the enclosure Blodpfx Aaoip Uzps Rei • Riepe spray systems for anti-adhesive or cleaning agents available as option Optional finishing units (2 free slots): • Radius scraper unit: Slight cutting action removes any milling marks from radius cutters, ensuring a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Light cutting action removes any glue residues from the glue line on the workpiece surface. • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm, provide a superb finish for ABS and PVC edge materials.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drain function optional), high-frequency cross-cutting station, high-frequency milling unit, chain feed, double pressure roller top pressure, extendable workpiece support rail, and signal lamp for workpiece sequencing. Suitable for ABS, PVC, melamine, and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and workpiece height from 8 – 50 mm. Feed speed: 7.0 m/min. • 2 free spaces for finishing units • 7.0“ color touch screen • Automatic edge feeding for roll material via a rotary turntable D=600 mm • Infeed lineal (400 mm) with support • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge application. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof, with bottom glue reserve (excess glue is automatically fed back into the glue pot), fine adjustable glue application via glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if machine remains switched on but is unused for a long time). Optional: EVA/PUR glue pot with drain/cleaning function for fast color change • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable pressure roller with spring tension, for perfect edge bonding between edge material and workpiece; pressure zone adjustable with digital counter. • High-frequency cross-cut saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades, and high-precision linear guides for clean, precise cutting; equipped with extraction hood. • High-frequency combination milling station, 2 powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer milling, horizontal and vertical workpiece sensing, unit adjustment equipped with digital counters for different edge types, 2 chip extraction hoods with central extraction nozzles 2 x Ø 100 mm; height adjustment of upper unit via top pressure. • Rotatable control panel with 7.0” color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, on/off of units, and error diagnostics • LED lighting in the cabin • Riepe spray systems for anti-adhesive or cleaning agents optionally available Optional finishing units (2 free spaces): • Radius scraping unit: Light pulling cut removes possible radius milling marks for a perfect finish. Fine adjustment via digital counter. Bodpfx Aaed R U Ace Roli • Surface scraping unit: Removes glue residues from the workpiece surface at the glue joint with a light pulling cut • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application to straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor HF end trimming station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, integrated section control for contact-free operation of processing functions, and L-Motion control (18 axes). For ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. • Automatic edge feeding for roll material via rotatable roll table D=800 mm • Infeed table (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood laths. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the pot), fine dosing glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color changes. • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and two smaller, conversely conical pressure rollers with pneumatic pressure, ensures optimal joint formation of the edge material with the workpiece. Program-controlled adjustment for edge thickness with L-Motion motor. • High-frequency cross-cut saw equipped with two 0.55 kW HF motors, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure a clean and precise cut, equipped with extraction hoods. Pneumatically swivels from the control panel. Bjdof Tdwcjpfx Aa Rjli • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, each with 3 L-Motion motors for positioning the horizontal tracing shoes, vertical tracing shoes, and the multifunction tool. 2 chip extraction hoods, height adjustment for the top unit with the top pressure. • Corner copying unit: Automatic processing of end edges up to 3 mm edge thickness. Equipped with 2 high-frequency motors 0.27 kW, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and the tool. • Rotatable control panel with 10'' color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, switching units on and off and error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the processing units.