Teleskopski Band nakup rabljenega (5.054)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Dsdpfjhy Tlrox Agpeup Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system Duedpfx Aec S Di Rjgpop ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Djdpfxolc Ewij Agpsup Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: novo, Hebrock Model F 2 next Dodpfx Aol D Rp Eegpeup Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Djdpfx Agefbr S Ropsup Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 90 kW (122,37 KM), vrsta goriva: dizel, dvižna moč: 4.100 kg/m, dvižna višina: 7.000 mm, Leto izdelave: 2016, obratovalne ure: 6.332 h, Oprema: dodatne luči, kabina, klimatska naprava, pogon na vsa štiri kolesa, spojka prikolice, vilice za palete, Teleskopski nakladalnik MANITOU MLT 741 H Leto izdelave: 2016 Po števcu: 6.332 ur Dvižna zmogljivost: 4,1 tone Dvižna višina: 7 metrov Dodpfxeyhmf Io Agpsup Deutz motor 90 KW 2-stopenjski hidrostatski pogon (36 km/h) - vključene vilice - mehanski hitri menjalnik - dodatni krog do nosilca vilic - svetlobni sistem z utripalkami - kabina s klimatsko napravo - upravljanje z joystickom - štirikolesni pogon - 3 načini krmiljenja - originalna barva - vključena vsa dokumentacija! - vključeno dovoljenje za cestno uporabo kategorije B! Prodajna cena: 34.500,-- neto Možna tudi ugodna dostava! Nova žlica na zalogi za doplačilo!

Stanje: rabljeno, Leto izdelave: 2025, številka stroja/vozila: 4123479, Funkcionalnost: popolnoma funkcionalen, moč: 1,13 kW (1,54 KM), vrsta vhodnega toka: trifazni, skupna višina: 27 mm, skupna masa: 225 kg, Razpon rezanja okroglega jekla pri 45°: 150 mm, Obseg rezanja okroglega jekla pri 90°: 220 mm, Obseg rezanja kvadratnega jekla pri 45°: 150 mm, Območje rezanja kvadratnega jekla pri 90°: 210 mm, dolžina tračnega lista: 2.450 mm, širina tračne žage: 9 mm, potrebna višina: 1.740 mm, zahteva za prostor dolžina: 1.550 mm, potrebna širina: 870 mm, delovna višina: 915 mm, Hidravlični cilinder / črpalka za emulzijo / ekscentrični napenjalec / podnožje / tračni list / vtikač 400V -16A- Hitrost rezanja: 35 + 70 m/min. Dodpfx Agjxxi N Aspeup

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, moč: 2,2 kW (2,99 KM), vhodna napetost: 400 V, vhodna frekvenca: 60 Hz, največja višina reza: 600 mm, največja širina rezanja: 430 mm, vrtilni razpon: 75 °, skupna masa: 1.500 kg, Bauer kotna tračna žaga vertikalna VG 450 L vključno z valjčnimi progami in avtomatskim prislonom. Oprema: Dujdpfeyryr Nsx Agpep - Hidravlično napenjanje rezalnega traku - Digitalni prikazovalnik kota - Priložena krtača za odrezke - Hidravlično nastavljanje kota reza: desno 45°, levo 30° - Hidravlično vpenjanje primeža: neprekinjeno nastavljiv tlak vpenjanja - Konstantno napenjanje rezalnega traku

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 2.690 h, nosilnost: 4.000 kg, dvižna višina: 18.000 mm, vrsta goriva: dizel, gradbena višina: 3.000 mm, vrsta prenosa: samodejen, Roto-teleskopski viljuškar proizvođača Merlo, RT 38 / Roto 40.18 S * Tip: RT38 / Roto 40.18 S, * Pogon na sve točkove (Allrad), * Godina proizvodnje: 2017, * Radni sati: 2690 prema očitavanju brojača, * Visina podizanja: cca 18 m, * Maksimalna nosivost: cca 4000 kg, Duedpfjyq Anwjx Agpjp * Maksimalni dohvat: cca 15,5 m, * Jedna kabina sa jednim sedištem, * Pogon preko 4-cilindarskog Kubota dizel motora, 4x4x4, * Maksimalna brzina: 20 km/h, * Konstrukcija sa 3 teleskopska segmenta od čelika, * Dimenzije pneumatika: 405/70-R20, profil 14-18 mm, međuosovinsko rastojanje 2750 mm, * Ukupne dimenzije (dužina x širina x visina): 6250 x 2300 x 3000 mm, * Ukupna težina: 13.900 kg, * Hidraulične 4-tačke stabilizacije sa nogama 4700 x 3900 mm, * Viljuška za palete, dužina krakova 1200 mm, daljinsko upravljanje putem radija Detaljnije informacije i dodatne slike dostupne na upit. Ovaj opis ne predstavlja obavezujuću ponudu i može sadržati greške, bez garancije za sve navedene podatke. Posetite i našu web stranicu.

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 2.809 h, nosilnost: 3.800 kg, dvižna višina: 16.000 mm, vrsta goriva: dizel, gradbena višina: 3.000 mm, vrsta prenosa: samodejen, Roto-Teleskopstapler des Herstellers Merlo, Roto 38.16 S * Typ Roto 38.16 S, * Allrad, * Baujahr 2017, * Betriebsstunden 2809 lt. Zähler abgelesen, * Hubhöhe ca. 16 m, * max. Tragfähigkeit ca. 3800 kg, * max. Ausladung ca. 13 m, * Einzelkabine mit 1 Sitz, * Antrieb über 4 Zylinder Kubota Dieselmotor, 4x4x4 * Höchstgeschwindigkeit 20 km/h, * 3-Teleskop-Stahlbauweise, * Reifengröße 400/70-R20, Profil 10-20 mm, Radstand 2750 mm, * Gesamtmaße in Länge x Breite x Höhe 6250 x 2300 x 3000 mm, * Gesamtgewicht 13900 kg, * hydraulische 4-Punkt Pratz-Abstützung 4700 x 3900 mm, Dusdoyq Anqspfx Agpop * Palettengabel, Zinkenlänge 1200 mm, Funkfernsteuerung nähere Daten und weitere Bilder gern auf Anfrage, diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Besuchen Sie auch unser Homepage

Stanje: kot nova (razstavni stroj), Natančna tračna žaga za rezanje lesa, plastike, kompozitnih materialov, aluminija in drugih materialov – CE standard – leto 2025 Tehnični podatki: Premer pogonskega kolesa: 700 mm Dimenzije mize: 700 x 840 mm Širina reza: 690 mm Višina reza: 460 mm Moč motorja: 7,5 Hp Nagib mize: -5° +45° Premer priključka za odsesavanje: 120 mm Djdpfxsynlqcs Agpjup Teža: 400 kg STROJ IZ RAZSTAVNEGA PROSTORA

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 B) Rotation unit (90°) Duedpjun N Dljfx Agpep C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, skupna masa: 8.700 kg, prva registracija: 01/2021, Leto izdelave: 2021, obratovalne ure: 1.272 h, JCB 535-95 / Dvižna višina: 9,5 m / Vilice / 4x4x4 / Teleskopski nakladalnik • Proizvajalec: JCB • Tip: 535-95 • Leto izdelave: 2021 • Delovne ure: 1272 h • Dvižna višina: 9,5 metra • Dvižna zmogljivost: 3500 kg • Moč: 55 kW / 74,78 KM • Motor: JCB 430 TA5-55 • Klima • Skupna teža: 8700 kg Dujdpoytfulofx Agpsp • Takojšnja pripravljenost za uporabo • Ta ponudba ni zavezujoča in je neobvezujoča. - Vmesna prodaja pridržana, - Napake in/ali tipkarske napake niso izključene. - Prodaja po naših splošnih pogojih.

Stanje: rabljeno, Leto izdelave: 2016, Industrial Automatic Edge Banding Machine SOLUTION XD MAIN FEATURES "E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: OPERATE THE MACHINE WITH JUST ONE "TOUCH" STANDARD PRESSURE UNIT WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES, AND SOLID WOOD EDGES GENERAL FEATURES Dujdjxy Tm Iopfx Agpep Single-sided edge banding machine in left-hand configuration for processing roll material and strip edges using all conventional hot-melt adhesives. The base frame consists of a robust welded steel stand with increased rigidity, providing optimal support for the processing units. The top pressure ensures a stable hold with a thick-walled steel profile and dual trapezoidal drive belt, which is automatically positioned according to panel thickness. Height adjustment with indicator at the top pressure and on the operator surface. Manual workpiece infeed system with large-scale work line and enlarged support area facilitates the insertion of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling. Working units attached to the pressure beam and mechanically linked to ensure automatic setting when changing panel thickness. Lower working units attached to the machine frame or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency inverters for optimal flexibility and improved production times; each unit is equipped with its own inverter. Extraction hood for all units positioned after the gluing station. Polycarbonate viewing windows provide a clear view of the units during processing. Interior lighting with sound-absorbing material for reduced noise emissions. Spacer at the infeed fence allows material to be fed into the machine at the correct distance. The distance adjusts automatically to the selected feed speed. Swiveling control panel, positioned at the infeed, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal enclosure mounted on the machine frame, equipped with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide rubberized nylon chain plates for optimal guidance and high precision. The chain runs on two guides made of hardened and ground steel – one round and one flat – to ensure straight feeding and prevent lateral displacement. Automatic lubrication of the chain; the control system adjusts the amount of oil according to the number of processed panels. External roller conveyor positioned along the entire machine length; equipped with a retractable system extendable up to 650 mm (for panels up to 1200 mm maximum width). E-TOUCH PC control system enables fast and easy execution of main functions, including: – Processing of programs in "Just in Time" mode – Possibility of management via parts lists – Management options through ...

Stanje: rabljeno, Leto izdelave: 1986, Premer valjev: 600 mm Višina reza: 385 mm Moč motorja: 2,2 kW Nagibna miza Velikost mize: 540 x 600 mm Skupna višina: 2100 mm Teža: cca 260 kg Lokacija skladišča: Nattheim Duodow D Aybjpfx Agpep

Stanje: rabljeno, Leto izdelave: 1992, Premer kolesa: 500 mm, vodilo traku zgoraj in spodaj, nagibna miza. Lokacija skladišča: Nattheim Djdpfsw D Aw Hjx Agpeup

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Razpon rezanja okroglo Maks. 530 mm Dsdpfx Agjykrv Djpoup Razpon rezanja kvadratno Maks. 530 x 520 mm Dimenzije žaginega traku 7.000 x 54 x 1,6 mm Hitrost rezanja 10 - 110 m/min Pogonska moč 7,5 kW Teža cca 4,5 tone

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Izteg 630 mm --- Hitrost rezanja od 15 do 120 m/min --- Hidravlični pomik mize --- Nosilnost mize pribl. 450 kg --- Hidravlični dvižni valji v mizi --- Pomik mize 400 mm. Miza desno od žaginega lista, Š x D 500 x 975 mm. Miza levo od žaginega lista, Š x D 500 x 975 mm. Namenjeno za rezanje visoko kakovostnih materialov ali za postavitev vpenjalnih naprav. Dujdpfjyr Hgajx Agpep

Stanje: novo, Leto izdelave: 2026, Cutting range round: 420 mm Cutting range square (W x H): 420 x 420 mm Smallest cuttable size: 10 x 10 mm Clamping range: 0 - 420 mm Bundle cutting range (min. W x H - max. W x H): 160 x 130 - 260 x 160 mm Shortest cut-off length: 5 mm Shortest remnant length in automatic operation*: 190 mm Shortest remnant length in single cut: 20 mm Length: 2220 mm Dodpewaa A Sefx Agpeup Width incl. chip conveyor: 3030 mm Height: 2250 mm Machine weight approx.: 3000 kg Total connected load: 11.5 kW Saw motor output: 7.5 kW Hydraulic motor output: 1.5 kW Cutting speed, steplessly adjustable: 20 - 80 m/min Saw feed rate: 1 - 300 mm/min Automatic material feed length, single stroke: 500 mm Automatic material feed length, multiple stroke: 9999 mm Saw blade dimensions: 5150 x 41 x 1.3 mm Standard equipment Fully enclosed guard according to CE standard JLH-EHA Saw Master CE Electrical safety Permanent magnetic synchronization motor Saw frame anti-collision detection LED work light Laser line projection Saw blade break detection Cutting depth control HMI + buttons Frequency inverter Deviation detector Hydraulic blade tension Vise differential pressure valves Automatic chip conveyor (spiral) Hydraulic blade guide tension Vise pressure regulator Motorized chip brush Cooling fan for hydraulics Automatic lubrication device Work table with rollers Hydraulic feed Main drive precision gearbox Split vise tension Moveable guide arm hydraulically clamped Chip collection container 40 (L) Toolbox (wire brush, leveling pads, touch-up paint) One-piece saw blade Optional equipment UL electrical safety Zero-start (option for first cut) Top clamp Servo feed Chip collection container (mobile) 70 (L)

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) Duedpfxou Ekbne Agpop FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Duedpewz Ic Ajfx Agpsp Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Djdpfeunrwnex Agpjup Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or can be used as the 1st and/or 2nd machine in a production line). Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 60 mm Working width (min/max): 240 / 2500 mm Control: PC 22 Feed speed (adjustable): 10–40 m/min Cam pitch: 500 mm EDGE PROCESSING (for each side): - Protection milling unit (pre-milling): 1 x 4.5 kW (hydro) - Chipping aggregate KD 11 (2 x 8.1 kW) hydro EDGE BANDING UNIT (for each side): - Gluing unit (hot melt + pre-melter): A3 + A34 - Edge magazine for rolls (slot no. 6) - Edge pressure zone “C” - Pre-milling unit: 2 x 0.55 kW - Milling unit MF 20 (2 x 0.55 kW) 20° - Profile scraping aggregate PN 20 Dodpjlikydefx Agpeup - Finishing unit (flat scraper + buffing aggregate) FA 11 Free space

Stanje: zelo dobro (rabljeno), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof cabins PROCESSING AREA (per side): Milling unit KD 10 (2 x 6.6 kW) EDGEBANDING AREA (per side): Gluing unit (hot-melt glue + premelter) A3 + A34 (high speed package) Pressure zone Djdpfx Agjifnxxspoup Edge magazine for rolls (compartment no.) 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finish unit (scrapers + smoothing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90°

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 Dusdslikvhspfx Agpjp X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA