Tekoči Tiska nakup rabljenega (10.867)

Stanje: rabljeno, Plastic belt with cleats Hedpfownbyujx Ah Djfn Cleat height: 15 mm Distance between cleats: 100 mm Belt width: 400 mm Loading height: approx. 900 mm Discharge height: approx. 1,250 mm Overall dimensions (L x W x H): approx. 1900 x 1250 x 1550 mm mobile

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Hedpfofxykpex Ah Djfn Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: dober (rabljeno), Press control unit from Brankamp, removed from a used machine due to a complete rebuild of the control system. Not tested, but was in use up to removal. Hfsdpfxebu N N Ne Ah Don May be suitable for spare parts or as a donor unit.

Stanje: novo, • Conveyor belt / chip conveyor for dowel drilling machine Nottmeyer or similar • Length (mm): approx. 7520 • Width (mm): approx. 770 Hodpfoguak Ajx Ah Dsfn

Leto izdelave: 2019, Stanje: rabljeno, številka stroja/vozila: 672248, robust vacuum-insulated working vessel for use with liquid nitrogen External diameter: 850 mm Internal / usable volume: 402 liters Outer vessel volume: 82 liters Lowest operating temperature: -196°C Supplied with lid Hfsdpsiqhkbsfx Ah Don Stable design with edge protection Flat bottom Three crane lugs Forklift pockets Custom-made – original price approx. €15,000 Weight: 274 kg

Stanje: novo, Hydraulic Cylinder Replacement Cylinder Chamber Filter Press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats. Hfsdpfxsd Hgade Ah Den

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 1.650 mm, širina transportnega traku: 400 mm, Manufacturer ERC machinery Length 165 cm Width 40 cm Hodowny Abopfx Ah Defn

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Hfodpfx Ajfxykweh Don Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: zelo dobro (rabljeno), SSI Schäfer Three-Part Inclined Conveyor Belt Manufacturer: SSI Schäfer Total length: 6,540 mm 1 x Segment: 3,960 x 470 mm 1 x Segment: 1,140 x 470 mm 1 x Segment: 540 x 470 mm Belt width: 370 mm Side guide left & right Height: 700 – 1,600 mm Inclination: approx. 8° 14% Geared Motor: Manufacturer: SEW-Eurodrive Type: WA20DT71D4 Operating voltage at 50 Hz: 220 ... 240 V / 380 ... 415 Y Hedpfxeq Aa E Us Ah Dsfn Current consumption at 50 Hz: 2.15 / 1.24 A Speed at 50 Hz: 1,380 / 135 rpm Power: 0.37 kW Protection class: IP 54 More new and used items can be found in our shop! International shipping costs on request!

Stanje: rabljeno, System: Used chamber filter press Design: Side-beam guided Filter plate size: 400x400 mm Number of chambers: 30 Cake thickness: 25 mm Filter plates: Polypropylene (PP) Filter cloths: Optionally available, tailored to the specific medium Discharge: Open Open filtration area: approx. 7.5 m² Press capacity: approx. 90 dm³ Plate pack length: approx. 1,512 mm Filtration pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10°C / max. 50°C Plate shifting: Manual Hydraulic pump: Optional Motor voltage: 380 V Control voltage: 230 V – 24 V Accessories: Optional, according to customer requirements and machine type Safety devices: Optional Special accessories: Optional, depending on configuration Hfjdpfxob E A Efs Ah Don Upgrades: Possible in consultation, depending on machine type Special services: Refurbishment service available upon request. Each unit undergoes a service check or general overhaul before delivery. Up to 12 months warranty provided for these units. Condition: The system is immediately operational. Purchase or rental: Inspections of the systems are possible by appointment at our premises.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Length: 145 cm Hodjwb Spgjpfx Ah Djfn Width: 45 cm

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Hodpodxvfhjfx Ah Dofn Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Oil tank: 300 l

Stanje: zelo dobro (rabljeno), SSI Schäfer two-piece incline conveyor Manufacturer: SSI Schäfer Total length: 5900 x 600 mm 1 x segment: 4700 x 600 mm 1 x segment: 1200 x 600 mm Belt width: 600 mm Overall width: 690 mm Side guides left & right Height: 800 - 1600 mm Incline: approx. 8° 14% Hfsdoq Aa Hrjpfx Ah Dsn Gear motor: Manufacturer: SEW-Eurodrive Type: WA20DT71D4 Operating voltage at 50 Hz: 220 ... 240 V / 380 ... 415 Y Current consumption at 50 Hz: 2.15 / 1.24 A Speed at 50 Hz: 1,380 / 135 rpm Power: 0.37 kW Protection class: IP54 More new and used items can be found in our shop! International shipping costs on request!

Stanje: rabljeno, System: Chamber filter press, pre-owned Application area: Chamber filter press, pilot plant Design: Side-bar guided Filter plate size: 400 x 400 mm Number of plates: 15 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available as an option, matched to the specific medium Discharge: Open Filtration area: approx. 3.0 m² Hjdpeb E I T Sjfx Ah Dofn Press volume: approx. 37 dm³ Plate package length: approx. 700 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Pump technology: Optional Purchase or rental: Inspection of the systems at our facility can be arranged by appointment. Would you like to rent or purchase this unit? Please contact us—we are happy to assist you.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 2.450 mm, širina transportnega traku: 600 mm, Length: 245 cm Width: 60 cm Hodpfewb Sn Nsx Ah Djfn

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, Pressure: 800 t Clear width between uprights: 1200 mm Stroke: 500 mm Total power requirement: 85 kW Approx. machine weight: 40 t Dimensions L x W x H: 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 piece Column diameter: 250 mm Installation height (distance between bolster and ram plate with cylinder fully retracted): 1000 mm Table size: 1300 x 1100 mm Ram area: 1300 x 1100 mm Ram height: 800 mm Table height above floor approx.: 950 mm Max. table load: 5 t Hsdsdxvfpspfx Ah Djfn Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at start: 10 mm/sec Hydraulics and tank mounted on top of press: included? All-round maintenance balcony: included? Side panels: included? Light barriers front and rear: included? Right side monitored door: included (800 x 530 mm)? Left side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation for ram and table by a 30 mm thick insulation plate Table deflection according to DIN max. 0.2 mm Ejector force: 150 t Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-1, System: Chamber filter press, demonstration model – as new Operating hours: None Application areas: Chamber filter press, laboratory press, pilot plant, wine press Design: Side-beam guided Filter plate size: 250 x 250 mm Number of plates: 8 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available optionally, customized to medium Discharge: Open Filter area: approx. 0.56 m² Pressing volume: approx. 7 dm³ Plate bundle length: approx. 379.2 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Hfjdpjb Dluwofx Ah Don Product-contact parts: PP & stainless steel Dimensions (L x W x H): approx. 960 x 400 x 360 mm Weight: 350 kg (photo shows identical machine) Pump system: Optional Purchase or rental: Machine inspections available by appointment at our facility. Note: Several units available. Please pre-order due to high demand. Are you interested in renting or purchasing this machine? Please contact us – we are happy to assist.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Length: 160 cm Hodpfx Aewanhveh Dofn Width: 83 cm

Stanje: novo, Hydraulic cylinder replacement cylinder Hsdpod Hf Uwsfx Ah Defn Chamber filter press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Stanje: dober (rabljeno), Leto izdelave: 2005, dolžina transportnega traku: 4.000 mm, širina transportnega traku: 100 mm, Manufacturer: Engel Length: 400 cm Width: 100 cm Hfsdpfswanhisx Ah Den

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-2, System: Chamber Filter Press – as new, demonstration model Operating hours: None Application area: Chamber filter press, pilot plant, wine press Design: Side-bar guided Filter plate size: 390x390 mm Number of plates: 14 Filter plates: Polypropylene (PP) Cake thickness: 25 mm Hfodpfxeb Dluyj Ah Den Filter cloths: Available optionally, tailored to the medium Filtrate discharge: Open Filter area: Approx. 2.8 m² Chamber volume: Approx. 35 dm³ Plate stack length: Approx. 391 mm Filtration pressure: Approx. 15 bar Plate shifting: Manual Frame: Steel Product-contact parts: Polypropylene (PP) + stainless steel Dimensions (LxWxH): Approx. 1695x750x630 mm Weight: 610 kg (photo shows identical system) Pump technology: Optional Purchase or rental: Inspection of the systems can be arranged at our facilities by appointment. Additional: Several units available. Please order in advance due to high demand.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, dolžina transportnega traku: 3.000 mm, širina transportnega traku: 800 mm, Manufacturer: Virginio Nastri Length: 300 cm Width: 80 cm Hsdpfx Aswang Soh Dsfn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 2.400 mm, širina transportnega traku: 600 mm, Manufacturer: Virginio Nastri Length: 260 cm Hfsdpfxowang Eo Ah Djn Width: 60 cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 1.550 mm, širina transportnega traku: 450 mm, Manufacturer: M.A.S.S. Hsdpfxowangrj Ah Defn Length: 155 cm Width: 45 cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 2.450 mm, širina transportnega traku: 500 mm, Manufacturer: M.A.S.S. Length: 245 cm Hsdpfswanglex Ah Defn Width: 50 cm