Tandem Osjo Priklopnika Nosilnost 7650 Kg nakup rabljenega (83.325)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Technical specifications of the EPS (Styrofoam) compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Hjdpfxsu Thkao Ah Donu Year of manufacture: 12/2022 Shredder drive power: 4 kW Compactor screw drive power: 7.5 kW Hydraulic unit drive power for retaining clamp in press channel: 1.1 kW Total connected load: 12.6 kW Rated current: 32 A Compaction ratio of pressed blocks to original material: approx. 50:1 (material dependent) Block weight after compaction: approx. 300 kg/m³ (material dependent) Block dimensions: 320 x 320 mm, length variable Throughput: approx. 100 kg/hour, depending on material Achievable density: approx. 250–300 kg/m³ The pressed blocks are stacked to about 1400 mm high on a pallet and wrapped with stretch film. Machine dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport weight of compactor: 1,325 kg Condition of the compactor: The machine has only been used occasionally, is in very good condition, and is available at short notice. Due to the low weight of the compactor and the forklift shoes in the transport frame, the machine is mobile and can be used directly at the material generation point, such as on construction sites. Electrical connection is provided via a CEE 32 A plug. Scope of delivery: 1 unit EPS compactor, ready to connect and operate Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. An inspection is possible by appointment. We assume no liability for technical data or possible errors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Temperature dry-block calibrator with accessories Hnodewc T Uajpfx Ah Dsu Temperature sensors are subject to mechanical, thermal and chemical stresses. Over time, this results in drift. Only regular calibration of the sensors provides information about the difference between actual and measured temperatures and makes the specific drift behavior visible. Dry-block calibrators and micro calibration baths are used for testing and calibrating various types of temperature measuring devices and sensors. Mechanical, electromechanical, or electronic measuring equipment can be checked with ease. The compact and robust instruments from SIKA are easily transportable, simple to operate, and feature all the necessary performance characteristics required for each test. Different requirements are placed on a temperature calibrator depending on whether it is used in the field, in production with frequently changing locations, or as a stationary unit in a measurement workshop or a test and calibration laboratory. Therefore, instruments must be lightweight and handy for convenient and quick on-site use. SIKA offers a range of temperature calibrators covering -55 °C to 1300 °C.

Stanje: novo, Included in the scope of delivery: 01x Wire mesh shelf, new Material finish: Sendzimir galvanized Version: drop-on shelf panels, bent on both sides Total depth: 1,112 mm Clear support distance: 1,000 mm Total width: 890 mm Mesh size: 106 x 72.5 mm Wire thickness: 3.8 mm Number of support bars: 4 pcs. Weight per unit: approx. 5.14 kg Technical data: Tested load capacity: 500 kg according to ANSI MH 26.2 for racking depth: 1,100 mm Assumed beam width: 50 mm For indoor use only Possible applications: Compartment size/modules required per compartment 1,100 x 1,800 mm / 2 pcs. 1,100 x 2,700 mm / 3 pcs. 1,100 x 3,600 mm / 4 pcs. Hsdpfx Ahjilk Ngj Djnu Heat shield plates: On request we can offer you heat shield plates (see images) for purchase; prices on request. Fire protection regulations impose special requirements. Therefore, the wire mesh shelves can be fitted with a welded-on heat shield plate. Should you require an anti-push-through device for cardboard boxes, the heat shield plate can also be manufactured with a bent edge. General information about the item: This item is only available for collection. Should transport or shipping be required, this will incur additional costs, which can be quoted separately depending on the delivery location and volume.

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni strojni primeži, primerni za delo v težkih proizvodnih pogojih. Robustna jeklena konstrukcija, precizna vodila in velika vpenjalna površina zagotavljajo stabilnost in togost tudi pri obdelavi večjih kosov. Parametri: • Teža 1 kosa: ca. 120 kg • Velika delovna čeljust – širina ca. 200 mm • Delovna razdalja čeljusti: ca. 310 mm • Močna litoželezno-jeklena konstrukcija • Kaljena drsna vodila • Idealno za velike rezkalne stroje in CNC-obdelovalne centre. Stanje: rabljeno, delujoče, običajni znaki uporabe. ///// CENA ZA 1 KOS ///// Hjdpow R S S Esfx Ah Dsnu

Stanje: novo, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard, type P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid by default. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Flooring - Fastening materials PRICES: Variant I: Base area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,711.50 net, excl. shipping and VAT Variant II: Base area: 50 m² | Dimensions: 5,000 x 10,000 mm | €4,756.00 net, excl. shipping and VAT Variant III: Base area: 75 m² | Dimensions: 5,000 x 15,000 mm | €6,659.80 net, excl. shipping and VAT Variant IV: Base area: 100 m² | Dimensions: 5,000 x 20,000 mm | €8,662.00 net, excl. shipping and VAT Variant V: Base area: 100 m² | Dimensions: 10,000 x 10,000 mm | €8,381.70 net, excl. shipping and VAT Variant VI: Base area: 150 m² | Dimensions: 10,000 x 15,000 mm | €12,162.50 net, excl. shipping and VAT Variant VII: Base area: 200 m² | Dimensions: 10,000 x 20,000 mm | €15,136.80 net, excl. shipping and VAT Variant VIII: Base area: 300 m² | Dimensions: 20,000 x 15,000 mm | €22,782.72 net, excl. shipping and VAT Further variants available Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Naturally, we develop and manufacture your mezzanine platform exactly according to your operational requirements—tailored to surface area, load capacity, installation height, and intended application. Our planning department will provide you with a customised, non-binding offer based on your specifications. Whether new construction, extension, or modernisation of existing systems – we support you with in-depth expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional charge. The extra costs depend on the delivery location and the size of the shipment and can be requested from us individually. TERMS OF PAYMENT Terms of payment are arranged in case of order. Prices are quoted per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice including VAT. Hjdpfx Ahexdvhps Djnu ABOUT US The company DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine platforms, textile warehouses, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favourable conditions. Please do not hesitate to contact us if you have any questions. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: rabljeno, Leto izdelave: 1984, nosilnost: 3.200 kg, 4 kosi Enonosilni polportalni mostni žerjav Proizvajalec: Christmann & Pfeifer KG Dvigalo: Demag Velikost: PLV 168 NF Nosilnost: 3200 kg Voziček: Demag Hodpfx Ahow Ugu Ae Dsnu Tip: 13/6PF 12/4 Uporabna višina kljuke: 4800 mm Razdalja med tirnicama: 8110 mm Teža: cca 2 t/kos Cena navedena za kos, prosto naloženo. Žerjavi so že demontirani in zapakirani za transport. Stroj si lahko ogledate na lokaciji. Vse informacije brez jamstva. Vmesna prodaja pridržana.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data Cardboard Shredder (2-shaft shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Hnsdeu Tha Ispfx Ah Deu Year of manufacture: 2011 (38,761 h), 2007 (52,386 h), 2007 (52,998 h), and 2007 (55,325 h) Operating hours recorded as of November 2021 Throughput volume: 130 m³/h Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder chamber dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder external dimensions without cover: 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t Application: The four Presto PZA cardboard shredders were in operation until 15.12.2021 at a Dutch logistics center, used to pre-shred loose and upright cartons from the returns department before pressing them into bales. Cartons were manually placed onto the feed conveyor and transported directly to the shredder by a slide belt conveyor for shredding. The pre-shredded cartons were then conveyed over hundreds of meters to a baler for compaction. Scope of supply: 4 units Presto Cardboard Shredder (2-shaft shredder) model PZA Remarks: The cardboard shredders were an essential part of the disposal line and have been well maintained to ensure high availability for the returns department. The machines are in good condition and ready for immediate use. The price is per unit ex works our warehouse in Siddeburen, Netherlands. Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. No liability is assumed for technical details or possible errors.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, High-pressure water pump, e.g. for - laboratory applications or - air humidification (cooling of outdoor areas / terraces) Pressure: 100 bar Voltage: 230 V Speed: 1400 rpm Hnjdpfx Aewc Ubnjh Deu

Stanje: novo, Included in the scope of delivery: 01x Wire mesh shelf, new Material finish: Sendzimir galvanized Design: drop-in mesh shelves, bent on both sides Total depth: 1,112 mm Clear support span: 1,000 mm Total width: 890 mm Mesh size: 106 x 53 mm Wire thickness: 3.8 mm Number of reinforcements: 7 pcs. Unit weight: approx. 7.53 kg Technical Data: Tested load capacity: 1,000 kg in accordance with ANSI MH 26.2 for frame depth: 1,100 mm Assumed beam width: 50 mm Use for indoor applications only Possible applications: Hjdoilk Nrjpfx Ah Denu Compartment size/ modules required per compartment 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat deflector sheets: On request, we can supply you with heat deflector sheets (see images) for purchase; prices on request. Fire protection imposes special requirements. For this reason, the wire mesh can be equipped with a welded-on heat deflector sheet. Should you require a push-through protection for cartons, the heat deflector sheet can also be supplied with an edge. General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will arise, which will be quoted separately depending on the delivery location and scope of delivery.

Stanje: novo, največja dovoljena obremenitev: 2.700 kg, Leto izdelave: 2025, Vlemmix Prevoznik strojev 2700 kg, 300x150x34 Novo Dovoljena skupna masa: 2700 kg Notranja nakladalna površina: 300/150/34 cm Zunanje mere: 482/210/167 cm Možna dovoljena skupna masa: 2700 kg Nosilnost: 2090 kg Lastna teža: 610 kg Osi: 2 x 1350 kg Pnevmatike: 195/50R13C Nizka nakladalna površina Os je opremljena z zavornim sistemom Knott Rampa s plinsko vzmetjo in višino rampe 130 cm Hsdpfx Ajw Aiwqsh Dsnu Rampa z perforirano rešetko Cena: 3.350,00 € neto Na zahtevo so na voljo tudi drugi priklopniki s 3,5 t Ogled je možen kadarkoli po predhodnem telefonskem dogovoru. Vse informacije brez garancije.

Stanje: rabljeno, TECHNICAL DATA: - Load capacity: 500 kg/m² - Grid size: approx. 4,200 x 5,000 mm - Top edge of flooring: approx. 4,030 mm - Clear height: approx. 3,700 mm - Colour: blue - Condition: used Scope of delivery: - Columns - Main and secondary beams Hnjdpfxeumbp Re Ah Dou - Diagonal bracing - Flooring panels PRICES: Price: from €45.00 net per m², ex stock Nordhorn. OPTIONAL ACCESSORIES: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping is also possible at an additional cost. The extra charges depend on the delivery location and the size of the shipment; please contact us for a personalised quote. TERMS OF PAYMENT Payment terms will be agreed upon order placement. The price is per item/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from a range of manufacturers/brands at excellent conditions. If you have any questions, please feel free to contact us. Connect Four – The success factors of DLK – Storage Technology | Levelmaker® | Logistics | Solutions.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, številka stroja/vozila: 97-006000S, Ponujen je inkjet tiskalnik serije Jet3 podjetja Paul Leibinger GmbH & Co. KG, letnik 2020. Stroj je v rabljenem stanju in trenutno ni v uporabi. Stroj ustreza najnovejšim varnostnim standardom. Stroj je pripravljen za obratovanje. OHIŠJE Hnjdpoxb Uqdefx Ah Deu - izdelano iz nerjavnega jekla - širina 486 mm, globina 286 mm, višina 446 mm - teža: 20,5 kg TISKALNA GLAVA - ohišje iz nerjavnega jekla - skupna dolžina 265 mm, premer 43 mm - teža: 1,5 kg Ogled stroja je možen po dogovoru in na zahtevo. Za dodatna vprašanja smo vam na voljo. (Slike še sledijo)

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 20.536 h, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, lastna masa: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput rate: 300 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying system: 4-fold vertical, fully automatic Throughput rates (depending on bulk density): Hnjdpfou Thypox Ah Deu — 30 kg/m³: approx. 6.0 t/h — 50 kg/m³: approx. 10.5 t/h — 100 kg/m³: approx. 17.5 t/h Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special features: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk goods of small grain size • Switch cabinet with air conditioning • Machine base raised by 200 mm Note: The machine is currently located in our workshop and is undergoing partial refurbishment. We expect the overhaul to be completed by the end of October, after which the machine will be tested and released for sale.

Stanje: novo, Leto izdelave: 2025, Blast container with craned hatch and reinforced floor. Dimensions: 5.89 x 2.35 x 2.69 m. Suitable for all commercially available blasting media such as cast steel grit, corundum, garnet sand, glass beads, ceramic beads, etc. Container blasting systems with integrated machine room. Flat conveyor floor, screw conveyor floor, bucket elevator, media recycling unit, vibrating screen, magnetic drawer, drum magnetic separator, 100 L pressure blasting pot, filter system, extraction floor, opening for use as a manual blasting booth. Equipped with LED and emergency lighting. Cartridge filter system and airborne dust filter included. For technical inquiries and further information, please contact us in writing or by phone. All machines are manufactured at our Großenlüder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-established, well-known contacts. Images may show optional equipment. Hodpfx Aofin Iysh Donu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Rabljen transportni cistern iz nerjavečega jekla / tlačna posoda Št. artikla: 10544 Količina: 50 kos Zadnja uporaba: živilska industrija Prostornina: 1500 L Tip: stoji na štirih nogah s tunelom za viličarja Material (mokri deli): 1.4301 / AISI304 Konstrukcija: enostenska s kupolastim pokrovom Hodpfjw N Illox Ah Djnu

Stanje: rabljeno, Leto izdelave: 2015, Reciklačni sistem za pridobivanje in ločevanje plastike ter gumijastih izdelkov od tekstilnih ojačitev, kot so različne vrste gumijastih cevi, PVC, ponjave, transparenti in drugi plastični materiali s tekstilno ojačitvijo. Sistem deluje v povezavi z granulatorjem in separacijskim sistemom. Ura proizvodnje: 50 - 80 kg/h Dimenzije odprtine za dovod: 270 x 120 mm + Ø80 mm Dolžina rezil: 3x2 + 2x2 Premer rotorja: 250 mm Dolžina reza: 600 mm Moč motorja: 22 kW Dimenzije: 3200 x 3000 mm Hedpfx Ahjwpkw Ee Djnu Višina: 2500 mm Teža: 1000 kg Leto proizvodnje: 2015 Tehnično stanje: rabljeni stroj, vsi motorji delujoči. Manjka zgornji pokrov za nalaganje izdelka z dimenzijami: 400x300 mm. Na voljo je popolna in originalna tehnična dokumentacija.

Stanje: dober (rabljeno), Leto izdelave: 1973, številka stroja/vozila: 73040, Embossing Press Baier GEBA 1/F, installation height 90 mm, pressing force 800 kg, working area 10 cm x 14 cm, year of manufacture 1973, machine number 73040, in good condition, immediately available. If interested, we are also happy to provide information about other machines available at our facility. Hsdpfx Ahjvt Rpqe Dsnu You are warmly invited to inspect the machine at our premises by appointment.

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: Res BS, Demag PK2 Chain Hoist Crane Lifting Gear 250Kg / 500Kg Approx. 40 units available!!! 250KG / 0.25t load capacity / lifting capacity – single-fall – 500.- 500KG / 0.5t load capacity / lifting capacity – double-fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Delivered complete with control pendant and load hook Total weight approx. 40 kg, connection to 380V 50Hz TOP condition, fully functional. Not a worn or used-up unit! Just connect and start operating. Comes from ongoing operation. Item location: 75053 Gondelsheim See pictures Hnjdpfx Ahevzkylj Dou

Stanje: dober (rabljeno), Leto izdelave: 2012, obratovalne ure: 12.078 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 30.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 98 kW (133,24 KM), volumenski pretok: 643 m³/h, Technical Data Press: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of manufacture: 2012 Total operating hours: 12,078 hours (as of September 2025) Pump operating hours: 6,616 hours (effective pump runtime) Number of bales pressed: 65,792 bales (as of September 2025) Main press force: 880 kN Specific pressure: 120 N/cm² Cutter edge pressure relief force: 120 kN Feed hopper dimensions: 970 x 1,800 mm Theoretical cycle time (idling): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 98 kW Total current consumption: 192 A Fuse protection: 250 A slow-acting Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/h Bulk density of 50 kg/m³: 32.15 t/h Bale weights at approx. 1.2 m bale length: 650 up to 750 kg per bale, material dependent Hydraulic oil tank capacity: 2,000 L HVI 46 Hedexcngnepfx Ah Denu PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor): 18,000 x 22,000 x 5,765 mm (L x W x H) Press weight approx. 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: - Access lock with key transfer system - Electro-hydraulic interlock of the press carriage during tying operation, to prevent press ram movement with highly expansive materials Additionally ordered special equipment: - Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motorization, at equivalent output - Manual activation/deactivation of the number of tying wires, to save strapping wire with non-expansive materials - Cutter edge relief with 121 kN press force - Wire monitoring by sensors, including press shutdown in the event of wire break or end of wire - Bale slide - Visual warning signal mounted on the control cabinet Condition of the press: The complete baling system (baler and conveyor system) is in good, ready-to-use condition. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2012 Drive power: 7.5 kW Conveyor speed: 0.05 – 0.4 m/sec Feeder belt length: 6,000 mm Feeder belt side wall height: 400 mm Incline belt length: 9,000 mm Incline belt side wall height: 800 mm Gooseneck length: 1,500 mm Incline: 30° Nominal belt width: 1,800 mm Usable belt width: 1,700 mm Belt quality: EP-500/4 Steel cleats on rubber belt: 50 x 50 mm Hollow pin chain, pitch: 125 mm, rollers: 36 mm Drive shaft height above ground: 4,284 mm Total conveyor height: 5,765 mm Transport dimensions feeder belt: approx. 7,000 x 2,200 x 1,250 mm (L x W x H) Transport dimensions incline belt: 13,000 x 2,500 x 2,900 mm (L x W x H) Pit dimensions for conveyor: 14,765 x 3,260 x 1,250 (L x W x H) Scope of delivery: For sale: the feed conveyor, the baler with bale slide, and the wire feed stations, but without wire. Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection possible by prior arrangement. We assume no liability for technical data or possible errors.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, barva: srebrn, Leto izdelave: 2022, The autopsy table is mounted on a central support column and features height adjustment in the range of 750 to 1000 mm. The table is made entirely of stainless steel (material no. 1.4301 - ANSI 304). The worktop includes a high, contoured edging and a seamlessly welded basin measuring 400 x 500 x 200 mm, with an overflow pipe and strainer insert installed at one end of the table. Additionally, the tabletop features a waterproof, soundproof membrane and has a negative incline, sloped towards the drain. All electrical connections are integrated into the base and are easily accessible through an inspection opening. The ST 10/150 autopsy table model includes the following features: • Knee-operated mixing tap for hot and cold water located on the central column • 3-meter shower hose with handheld sprayer Hnodpsw Rym Djfx Ah Deu • 2 watertight electrical sockets • All electrical and water connections are factory-installed • UP/DOWN button for height adjustment via an integrated electromechanical drive DIMENSIONS: 260x85cm Power supply: 230V Load capacity: 300kg. The table is brand new, factory-packed on a pallet (as shown in the photo), ready for installation, and comes with all necessary accessories. The device is new and comes from a bailiff liquidation, hence the attractive price. The official retail price for this model is around 20,000 EUR! Additional information is available in the attached files below.

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Ponudba zajema Fein fino vzmetno ravnotežje, nastavljivo 4,5-9 kg, z jeklenico 2 m in nastavljivo vzmetno silo. Hjdpfx Aew Tm Rneh Donu Na voljo več kosov, letnik 2005. Dodatne informacije na zahtevo. Plačilo z gotovino ali predplačilo. Prodaja samo pravnim osebam. Brez garancije in odgovornosti.

Stanje: novo, Leto izdelave: 2025, Priprava abraziva 1x pometna jama 1x vedričasti transporter 1x zračni separator 1x električno vibracijsko sito 1x bunker za abraziv 1x tlačna peskalna naprava 200 l 1x peskalna cev, peskalna šoba, varnostno stikalo, krmilni kabel 1x krmilna omarica Hnsdpfx Ahsw Ivvcs Dsu Opcijska oprema: - Prečna polžna transportna naprava čez celotno širino peskalne hale (tudi kot dodatni zalogovnik za večurno peskanje) - Razširitev na 2 abraziva: feritno in mineralno - Bubenski magnetni separator - Končna stopnja demagnetizacije - Magnetni predal

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), lastna masa: 12.000 kg, volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours, as of August 2025 Pressing Force (Main Press): 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput Rate: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Capacity at a Bulk Density of: - 20 kg/m³: up to 6 t/hour, depending on material - 50 kg/m³: up to 13 t/hour, depending on material Bale Weights: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Operator Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Type: HVI 46 Machine Installation Dimensions (with bale chute): 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (baler only): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (baler): approx. 12 t Scope of Supply: - HSM VK 4812 channel baler, without hydraulic oil, without conveyor equipment - Two wire reel boxes for 8 x 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and potential-free contacts for external control. Operation from the control cabinet is on the left in pressing direction; the needle unit is on the right side and can be folded back for transport. Hodpfevtpq Hsx Ah Djnu The machine has been partially overhauled and tested in our workshop – please see the photos. Documentation (operating instructions, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment. No liability for technical specifications or possible errors.

Leto izdelave: 2025, Stanje: novo, Vzdrževanju prijazna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predkomoro in udarnim ločevalnikom, popolnoma sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 1.4.B62.00 5000 m³/h (na voljo tudi druge velikosti) Sestava iz robustnega, vakuumsko tesnega 3 mm jeklenega ohišja, razdeljenega na surovi zračni prostor s filtrirnimi kartušami, filter s predkomoro in udarnim ločevalnikom ter čistim zračnim prostorom s čiščenjem filtrov s stisnjenim zrakom, vsak s posebnimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom za odstranjevanje prahu z uporabo Big Bag vreč. Magnetni ventil s prikazom diferenčnega tlaka za optimalno nastavitev čiščenja filtrirnih kartuš. Servisna vrata kot nihajna vrata za enostavno vzdrževanje. Hsdpfx Ahew Ivr De Dsnu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 19.750 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, kapaciteta rezervoarja za olje: 2.000 l, lastna masa: 33.000 kg, volumenski pretok: 643 m³/h, Technical Data – Baler: Hjdpjxb Dvvjfx Ah Denu Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of Manufacture: 2015 Operating Hours: 19,750 hours (as of July 2025) Number of Bales Produced: 24,760 bales (as of July 2025) Main Press Force: 1,000 kN Specific Press Force: 120 N/cm² Shear Edge Ejector Force: 121 kN Insertion Chute Dimensions: 970 x 1,800 mm Theoretical Cycle Time (idle): 8.3 seconds Theoretical Throughput: 643 m³/hour Bale Dimensions: 1,100 x 750 mm; length variable from 600 to 2,000 mm Drive Power: 2 x 45 kW, frequency-controlled Connected Load: 110 kW Total Power Consumption: 213 A Fuse Protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput Rates for a Bulk Density of 20 kg/m³: 12.86 t/hour Bulk Density of 50 kg/m³: 32.15 t/hour Bale Weights (at approx. 1.2 m bale length): 650 to 750 kg/bale, depending on material Hydraulic Oil Tank Volume: 2,000 L HVI 46 PLC Control: Siemens S7-300 Control Panel: Siemens TP 700 Baler Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation Dimensions with Conveyor Technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of Baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special Machine Features: - Access interlock via key transfer system - Electro-hydraulic locking of the press carriage during tying, ensuring the press ram does not shift with highly expansive materials Additional Optional Equipment Ordered: - Frequency-controlled main drive 2 x 45 kW, offering up to 40% energy savings compared to standard 2 x 45 kW motorization, with the same performance output - Manual selection/deselection of wire tying for non-expansive materials, saving tying wire - Shear-edge ejector with 121 kN pressing force - Sensor-based wire monitoring with automatic press shutdown on wire break or end - Bale chute - Visual warning signal mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, operational condition, regularly cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Model: Chain Belt Conveyor KF 1800 Year of Manufacture: 2015 Belt Speed: 0.36 m/s Input Belt Length: 7,000 mm Inclined Belt Length: 14,500 mm Gooseneck Length: 1,550 mm Incline Angle: 30° Nominal Width: 1,800 mm Usable Width: 1,638 mm Overall Conveyor Height: 7,745 mm Pit Dimensions for Conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: For sale are the input conveyor, the transverse distributor belt, and the baler—including bale chute, but without wire pulling stations and without wire. Notes: The full documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or potential errors.