Strani nakup rabljenega (2.141)

Stanje: rabljeno, prevoženi kilometri: 550.000 km, moč: 309 kW (420,12 KM), prva registracija: 06/2007, vrsta goriva: dizel, konfiguracija osi: 8x2, gorivo: dizel, vrsta prenosa: mehanski, emisijski razred: Euro 4, vzmetenje: jeklo-zrak, Leto izdelave: 2007, Oprema: žerjav, Technically in good condition and ready to drive Hsdpfx Ajpbw Nhob Sjw

Stanje: rabljeno, prevoženi kilometri: 591.680 km, moč: 332 kW (451,39 KM), prva registracija: 12/2009, skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 8x4, največja dovoljena obremenitev: 17.250 kg, lastna masa: 14.750 kg, velikost pnevmatike: 385/65 r22,5 - 315/80 r22,5, medosna razdalja: 4.250 mm, zavore: retarder, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, prostornina tovornega prostora: 14 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 5.600 mm, višina nakladalnega prostora: 1.100 mm, številka stroja/vozila: 172, Oprema: ABS, hidravlika, klimatska naprava, nadzor oprijema, nizka raven hrupa, tempomat, zapora diferenciala, Urea tank (AdBlue) Displacement: 12,882 cc EBS (Electronic Braking System) Automatic climate control Sun visor Lashing rings Foldable underrun protection 3rd and 7th gear grinding Subject to errors and omissions Hedpfx Abjp Nmu Ho Sew

Stanje: novo, številka stroja/vozila: bdf30cb8a53c70e900bdb40a7, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Gear support foot at the front 2 wheel chocks with holders Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the load platform Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Hedpoi Riwiofx Ab Sow Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker equalization) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel rims, factory silver Braking System 2-line air brake system with color-coded piping for easy service. Manual spindle parking brake Integral air tank ABS and ALB, with ABS plug at the front, including connection cable. Note: The trailer may only be towed by vehicles that guarantee ABS functionality! 2 non-interchangeable coupling heads at the front, with connecting lines to the truck Electrics 24 Volt, multi-chamber lighting, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Hydraulics Three-way tipping system, hydraulic multi-piston cylinder with stroke limiter and safety cable Low pressure cylinder up to max. 170 bar, without restrictor. If required, the restrictor must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Tipping operated hydraulically via truck PTO Tipper Body Robust tipping platform with 4 mm steel sheet floor, steel side wall construction, continuous side walls, foldable and swinging with central locking at the bottom. Removable rear corner stanchions. Rear wall foldable and swinging, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 bottom hinges. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated for 5 tonnes Operating Notes The specified gross weight is technically feasible; depending on the cargo, the gross weight might not be attainable while complying with permissible axle/support/kingpin loads. (Poor handling or tracking may result from incorrect load distribution) Registration/Country & Plates Country of registration: Germany with Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year anti-corrosion warranty against rust-through Side wall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox are optionally available at additional cost Note: Archive images

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 807.000 km, moč: 324 kW (440,52 KM), prva registracija: 03/2012, skupna masa: 28.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 6x4, lastna masa: 12.275 kg, velikost pnevmatike: 315/80/22.5, naslednji pregled (TÜV): 02/2026, gorivo: dizel, medosna razdalja: 3.650 mm, zavore: intarder, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, prostornina tovornega prostora: 11 m³, Leto izdelave: 2012, številka stroja/vozila: 1928, Oprema: ABS, filter saj, hidravlika, klimatska naprava, nadzor oprijema, nizka raven hrupa, parkirni grelec, računalnik na krovu, registracija vozila, retarder, spojka prikolice, tempomat, zapora diferenciala, Meiller three-way tipper body with Bordmatic on the left, full leaf spring suspension, ZF manual transmission with intarder, 90% tires, 50 mm trailer coupling, continuous brake and hydraulic system, diesel/water separator, new diesel tank, new air reservoir, not a construction site vehicle, German vehicle from first owner. Hedpfx Aeq T Iunob Sew Sale to commercial customers only and without any warranty. We deliver to any German seaport.

Stanje: rabljeno, Leto izdelave: 2001, Dematic Roller Curve Left 90°-600-540 IR795 RA2325 Manufacturer: Dematic Direction of travel: 180° counterclockwise Roller width (RB): 540 mm, tapered, plastic-coated Nominal/overall width (NB): 600 mm Internal radius (IR): 795 mm Frame height: 132 mm Height including motor: 275 mm Motor: MOVI-Mot 3x300-500V 0.25kW 1400 rpm max Brake: 220-240V Gear motor: SEW Conveying speed: 0.71 m/s Can be dismantled into 2x90° segments for shipping Optional accessories: - Frequency inverter for stepless speed control - Supports - Side guides Hjdpfx Asu Nxw Eob Sow All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, The team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.

Stanje: zelo dobro (rabljeno), KOMPLETNE DVOSTRANE MAŠINE ZA FORMATIRANJE I NANOŠENJE KANT TRAKE, sačinjene od: OZ2050A) Stanica za ubacivanje 'MEINERT' model P 415 D/B - L, dvostruka stanica za prihvat. Sa centralno motorizovanim rolno-stolom. Sa dve motorizovane rolne postavljene na podu za dopremu složenih ploča do stanice za ubacivanje. OZ2050B) Prva dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 440 / A / R3 OZ2050C) Povezani rolni sto 'IMA' model IDK L/Q sa obrtanjem (od uzdužnog ka poprečnom smeru) OZ2050D) Druga dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 590 / B / R3 Hsdpoxftt Ejfx Ab Sow OZ2050E) Povezani rolni sto 'IMA' model IDK Q/L sa uređajem za obrtanje (od poprečnog ka uzdužnom smeru) sa dvostrukim konus sistemom OZ2050F) Dvostrana stanica za skidanje sa palete 'MEINERT' model P 415 D/S - L, kompletna sa centralno motorizovanom rolnom trakom. Sa dve motorizovane rolne trake.

Stanje: rabljeno, Leto izdelave: 2009, Four-sided Planer Weinig Variomat Year of manufacture: 2009 Serial number: 113680 400 V, 32 kW, 64 amps. Min.-max. working width: 20–230 mm Min.-max. working height: 8–120 mm Max. vertical spindle tool diameter: 232 mm Max. horizontal spindle tool diameter (except the first): 200 mm Infeed table length: 1950 mm Feed speed: 6–12 m/min Spindle diameter: 40 mm Spindle speed: 6000 rpm Hsdpfx Abewnhh Ee Sjw 1st bottom spindle: 5.5 kW 2nd and 3rd spindle, left and right: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 5.5 kW Please note: The 5th spindle is not functional. Dimensions: 4000 x 1400 x H1350 mm, weight 2500 kg. - Year of manufacture: 2009 - Documentation available: No - CE marking present: Yes - Serial number: 113680 Financial information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items in the industrial sector. Yorick Diebels

Stanje: rabljeno, prevoženi kilometri: 614.850 km, moč: 345 kW (469,07 KM), prva registracija: 06/2015, skupna masa: 26.000 kg, vrsta goriva: dizel, konfiguracija osi: 6x4, največja dovoljena obremenitev: 13.760 kg, lastna masa: 12.240 kg, velikost pnevmatike: 315/80 r22,5, medosna razdalja: 3.400 mm, zavore: VEB (Kombinat državnih podjetij), voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, prostornina tovornega prostora: 12 m³, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 4.900 mm, višina nakladalnega prostora: 1.050 mm, številka stroja/vozila: 400, Oprema: ABS, hidravlika, klimatska naprava, nadzor oprijema, nizka raven hrupa, parkirni grelec, spojka prikolice, tempomat, zapora diferenciala, Colour: white/grey Hjdpek Afaaefx Ab Sow Urea tank (AdBlue) Displacement: 12,777 cc EBS (Electronic Braking System) Automatic climate control Dautel tipper with electric Cramaro sliding cover Folding underrun protection Sun visor Air-suspended cab 1 berth Gross combination weight: 60,000 kg Beacon lights Euro 6 B Subject to errors and prior sale

Stanje: novo, številka stroja/vozila: 06b624786df9f4b5c196a36b0, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285 / 70 r 19,5, Further information Chassis Central axle tipping trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball tipping bearing 2-speed gear support leg at the front Foldable rear support Wheel chocks with holder Steel underride guard Rear splash guards across the full width Quarter shell mudguards Lockable storage compartment for loading ramps beneath the loading area Drawbar device for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) Wheels and Tires 285 / 70 R 19.5 Manufacturer’s choice Steel rims, factory silver Braking system 2-line air brake system Spring-actuated parking brake 2 interlock-proof coupling heads at the front, with connecting lines to the tractor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrics 24 Volt, multi-chamber lamps, yellow side LED lighting 2 white position lights in front 2 white/red lane marker lights at the rear All lamps in LED version (Note! With certain towing vehicles, diagnostic errors may occur, although functionality is ensured) 1 x 15-pin plug at the front, with connecting cable Hydraulics Hodpfx Abji Ri Ipo Sow Three-way tipping system, hydraulic multi-piston press with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without flow restrictor. If required, this must be retrofitted on the truck. Operation hydraulic via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper body Sturdy tipping body with 4 mm steel plate floor, steel drop sides, continuous, foldable and pendulum-mounted with central locking at the bottom. Corner stanchions at the rear plug-in. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 bottom hinges. Side wall return springs (not possible with split side walls) Rear wall pendulum-mounted and as 2-wing door (not foldable), with door retainer and side protective rubber Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 t Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white on side and red at rear Paintwork Frame hot-dip galvanized including passivation; 15-year warranty against rust-through Side walls/body RAL 3002, carmine red Note! Body inside only primed! Attention: Archive images!

Stanje: dober (rabljeno), Hladna krožna žaga, krožna žaga za kov, kotna žaga, krožna žaga, žagalna naprava, kovinska žaga -Proizvajalec: MEP, hladna krožna žaga za kov tip TRL 300, nagibna na obe strani -Motor: tip C 112 M -Moč: 2,2 / 3,0 kW -Hitrost: 720 / 1450 obr/min -Krožna žaga: Ø 315 mm -Območje reza pri 90 stopinjah plosko: 110 x 70 mm -Območje reza pri 45 stopinjah: 100 mm Hsdpfsxlzytox Ab Sow -Dodatki: vklj. 2 krožna rezila, glejte slike -Mere: 1230/630/V1800 mm -Teža: 273 kg

Stanje: novo, lastna masa: 1.260 kg, največja dovoljena obremenitev: 2.240 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 300 mm, vzmetenje: jeklo, velikost pnevmatike: 195/50r13c, Large three-way tipper from trailer manufacturer HAPERT, model COBALT HM-2-FERRO, 3500kg, 405x200x30mm. In our opinion, the COBALT tipper series from Hapert is extremely robust, very well equipped, and offered at a fair price. This car trailer, designed as a flatbed high loader, is built for durability. High-quality features and a very comfortable suspension system (parabolic spring suspension) are standard on this three-way tipper trailer. Hedpfxoqxbknj Ab Sjw Here is an overview of the comprehensive standard features of this tipping trailer: - Built with an extremely stable, hot-dip galvanized steel frame - Solid steel floor - Loading ramps stowable under the platform - Crank-type rear support stands - Parabolic suspension with shock absorbers, rated for 100 km/h - Electrohydraulics with battery in a covered compartment - Detachable illuminated control unit - Double-walled anodized aluminium side panels, all sides foldable and removable - Easy-to-use eccentric locks - Low chassis with 195/50R13C tires - Lashing rings rated for 1000kg - Net hooks - Steel plate on wooden floor - Automatic jockey wheel and reinforced V-drawbar We offer useful accessories for Hapert three-way tippers. At a reasonable price, you can get side wall extensions, mesh sides, tarpaulin, frame for cover, flat tarpaulin, battery charger, emergency hand pump, toolbox, lashing straps, and anti-theft device.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12332034, lastna masa: 680 kg, največja dovoljena obremenitev: 1.920 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, Leto izdelave: 2025, Loading dimensions approx. 1800 mm x 3060 mm External dimensions approx. 1920 mm x 4400 mm Permissible total weight: 2600 kg Payload: approx. 1920 kg (payload varies depending on additional equipment) Manufacturer: Debon Special features - 3-way tipper "PW2.4E" - Electric hydraulic pump (battery-powered) - Charging contacts in the frame profile (12V / chargers can be used) - 6 lashing rings in the loading floor - H-frame, galvanized steel (installed / removable) - 350 mm aluminium side walls (foldable / removable) - Ramp storage compartment (without ramps, available as optional accessory) - Vehicle documents included Hsdpfx Aoi R Hw Ueb Ssw Additional equipment - Floor panel: galvanized steel sheet on phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar fully hot-dip galvanized | Rubber suspension axle | V-drawbar with ball coupling | Heavy-duty automatic support wheel Electrical system - 12 Volt | 13-pin plug | Fog light | Marker lights If you would like to purchase this trailer or have further questions about our tipper trailers, please use our internal 3-way tipper trailer reference "No.12332034"

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/1988, Leto izdelave: 1988, Technically sound Hsdpfx Aspuhpwjb Sew Loading area 6.20 m

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 412, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2025, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, medosna razdalja: 1.310 mm, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Hodpelipccsfx Ab Ssw Internal width approx. 2,420 mm Overall width max. 2,550 mm Loading height unladen approx. 1,510 mm Chassis Central axle steel frame welded construction in weight-optimized lightweight design with tipping brackets and rear tipping shaft; Plug-in lock for tipping body with cross safety Drawgear Cranked drawbar with height-adjustable heavy-duty screw-type towing eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support device Front: 1 mechanical landing gear with crank on left in direction of travel, Manufacturer according to factory selection, 1 step bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, offroad version, automatic brake adjusters Axle spacing 1,310 mm Without axle lift Wheels 4 tyres 385/65 R 22.5, 160K, brand according to factory selection (road profile) 4 steel rims 11.75 x 22.5, offsetless, silver Without spare tyre Without spare rim(s) Without wheel nut caps Brake system/Suspension Brake system according to EU Directive 71/320 or ECE R13 Two-line compressed air brake system Brake system by Knorr EBS system 2S2M, 2nd axle sensed RSS/RSP - stability program Spring-actuated parking brake on 2nd axle Aluminum air tanks Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additionally lowering lockout via rotary switch on the trailer Without lift and lowering device Tipping body Steel welded construction Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 outside on the front wall High-tensile fine-grain steel floor plate 5 mm (Slight floor waviness due to welding distortion possible) 5 pairs of high-pivot lashing rings 5 t (distance between rings approx. 2,320 mm) One-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, fold-down with extended swing bolt locks and spring lifting aid, as well as additional pendulum function Side walls left and right with manual central locking 2 rear corner posts in side wall height, fixed on sides Steel rear wall 4 mm (HB400), approx. 980 mm high, swinging with recessed mounting, hooks for dosing chains on rear wall and underbody Rear wall locking = automatic pneumatic latch 2 dosing chains for swinging rear wall With sealing strips Hydraulics Single-line system with hydraulic connection hose and quick coupling SVK DN13 Tipping cylinder for 3-way tipping, initial lifting force approx. 30 t; 1 safety cable Tarp Plastic roll tarp incl. aluminum tube with hand crank, side overhang of approx. 400 mm, without customs closure, toward right in direction of travel with horizontal rope lashing, zigzag lashing at front and rear; Retaining bracket and latch for rolled up tarp on right in direction of travel; bracket for hand crank Tarp fastening on left in direction of travel with 2 tension belts incl. rubber pad

Stanje: novo, številka stroja/vozila: e763c8c2bb3370bd2342236a4, lastna masa: 3 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearings Gearbox support leg at the front 2 wheel chocks with holders Steel underride protection Lockable storage compartment for loading ramps beneath the loading area Hedpfji Rizbjx Ab Sew Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension Euro axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Factory silver steel rims Braking System 2-line air brake system with color-coded line routing for easy service. Hand spindle parking brake Integral air reservoir Without ABS but with mechanical automatic load-dependent braking (ALB), max. 60 km/h registration 2 swap-proof coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connection cable extended by approx. 60 cm Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limitation and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipping body Robust tipping body with 4 mm steel plate floor, steel side wall construction, continuous side walls, fold-down and pendulum-mounted with central locking at the bottom. Detachable corner posts at the rear. Tailgate fold-down and pendulum mounted, with central locking at the bottom. Bed length approx. 4,500 mm, side walls with 5 bottom hinges. Bed width 2,420 mm 5 pairs of lashing eyes in the floor, each rated at 5 t Operational notes The specified gross weight is technically achievable; depending on the cargo, the gross weight may not be attainable when observing permissible axle/support/kingpin loads. (Poor driving or trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra inspection and certificate, for max. 60 km/h registration, towing vehicle LoF, (country of registration Switzerland max. 40 km/h possible) Prepared for single-line number plate holder Without contour marking / reflective tape as per ECE R 048, Paintwork Frame hot-dip galvanized including passivation, 15 years warranty against corrosion Side/tipper body RAL 3002 carmine red Note! If body is galvanized, it will not be painted! Note! Inside of body is only primed! Wide tyres available at extra charge: 355 / 60 R 18, loading height approx. 980 mm Attention: Archive pictures!

Stanje: zelo dobro (rabljeno), 4-sided sizing and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 Hsdpeiztxysfx Ab Ssw SIZING UNIT: Twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: Top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), grooving unit for rabbeting and grooving UF11 (4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) KZ0400c) Rotating station (90° longitudinal-transverse) "HOMAG" model TDL 310 / 25 / 12 (for longitudinal to cross transfer) Feed speed (adjustable): 20–60 m/min KZ0400d) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 SIZING UNIT: Pre-milling cutter (1 x 4.5 kW), twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: End trimming unit HL 84 (2 x 0.22 kW), top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile trimming/copying unit FF32 (4 x 0.4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) MINIMUM EDGE LENGTH: 70 mm (For narrow workpieces: max. thickness 25 mm, max. edge thickness 2 mm, max. cycle rate 20 pcs/min, max. feed speed 20 m/min.)

Stanje: novo, lastna masa: 1.060 kg, največja dovoljena obremenitev: 2.440 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 185/70r13c, Three-way tipper from trailer manufacturer HAPERT, model COBALT HM2+ 3500kg 335x180x40. In our opinion, the cobalt tippers from Hapert are extremely robust, very well equipped, and also offer a fair price. This car trailer, designed as a flatbed high loader, is built for longevity. Premium-quality equipment comes as standard with this three-way tipper. Overview of the comprehensive standard equipment on this tipping trailer: - Extremely sturdy steel frame, hot-dip galvanized by immersion - Parabolic suspension with shock absorbers - Loading ramps stowable beneath the platform - Crank-type rear support legs - Electrohydraulics with battery and emergency hand pump - Removable, illuminated control unit - Double-walled, 40cm high, anodized aluminium drop sides in anthracite - All sides are hinged and removable - H-frame headboard - Easy-to-use eccentric latches - Low chassis with off-road tread tyres - LED lighting with protective covers - Lashing rings rated to 1000kg - Mesh hooks - Solid steel floor - Highly robust automatic jockey wheel - Battery charger - Reinforced V-drawbar We offer useful accessories for Hapert three-way tippers: Affordable mesh sides, sidewall extensions, tarpaulin with frame, toolbox, lashing straps, and locks available here. ----- All of our competitively-priced offers can also be found on our website. Delivery available across Germany (except islands)! Feel free to ask for a quote. ----- Hjdpef Nt Disfx Ab Sjw PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37, 28816 Stuhr near Bremen Tel: 0 Fax: Collection times: Monday - Friday – hours No collection possible on Saturdays!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12332035, lastna masa: 680 kg, največja dovoljena obremenitev: 1.920 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 950 mm, vzmetenje: drugo, Leto izdelave: 2025, Loading dimensions approx. 1800 mm x 3060 mm External dimensions approx. 1920 mm x 4400 mm Permissible total weight: 2,600 kg Payload: approx. 1,920 kg (payload varies depending on additional equipment) Manufacturer: Debon Features - 3-way tipper "PW2.4E" - Electric hydraulic pump (battery powered) - Charging contacts in chassis frame (12V / compatible with chargers) - 6 lashing eyes in the loading floor - 600 mm mesh side extensions (installed / removable) - H-frame, galvanized steel (included / not installed) - 350 mm aluminium drop sides (foldable / removable) - Ramp compartment (ramps not included, available as accessory) - Vehicle documents included Additional equipment - Floor plate: galvanized steel sheet on anti-slip plywood - Wheel chocks + holders Chassis - Axle and drawbar fully hot-dip galvanized | Rubber suspension axle | V-drawbar with ball coupling | Automatic heavy-duty jockey wheel Electrics Hedpfsi R Hvpex Ab Sow - 12 volt | 13-pin plug | Rear fog lamp | Clearance/outline lights If you wish to purchase this trailer or have further enquiries regarding trailers, please use our internal reference for 3-way tippers "No.12332035".

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 174, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2025, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 1.310 mm, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Total width max. 2,550 mm Loading height unladen approx. 1,510 mm Frame Central axle steel frame welded construction in weight-optimized lightweight design with tipping outriggers and rear tipping shaft Plug-in lock for tipping bridge with cross-over safety Drawbar Cranked drawbar with height-adjustable heavy-duty screw-type towing eye 50 mm (offset approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm – max. 1,000 mm Support device Front: 1 mechanical landing gear with crank left 1 access step bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road design, automatic brake adjusters Axle spacing 1,310 mm Without axle lift Wheels 4 tyres 385/65 R 22.5, 160K, brand at manufacturer’s discretion (road tread) 4 steel rims 11.75 x 22.5, zero offset, silver Without spare wheel Without spare rim Without wheel nut covers Braking system / Suspension Braking system to EC Directive 71/320 or ECE R13 Two-line compressed air braking system Brake system brand: Knorr EBS system 2S2M, sensors on 2nd axle Hsdpfxep T Ullo Ab Ssw RSS/RSP – stability program Spring-actuated parking brake on 2nd axle Aluminium air tanks Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines laid under drawbar Electronic air suspension with automatic lowering via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance / Safety Systems SWIT – Schwarzmüller Intelligent Telematics, service package “BASIC” Data transmission via GPRS Tipper body Steel welded structure, body length 5,100 mm Fixed steel front wall 4 mm, approx. 980 mm high 2 interior and 1 exterior access steps on front wall Special fine-grain steel floor plate 5 mm (Slight floor wave possible due to welding distortion) 5 pairs upward-folding lashing rings 5 t (distance between lashing rings approx. 2,320 mm) One-piece reinforced aluminium hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended swivel latch fasteners and spring-lift aid, additionally side walls on left and right can swing with manual central locking 2 rear corner posts at side wall height, fixed-side mounted Steel rear wall 4 mm (HB400), approx. 980 mm high, swinging with recessed bearing, hooks for metering chains on rear wall and underside of body Rear wall locking = automatic pneumatic lock 2 metering chains for swinging rear wall With sealing strips Hydraulics Single-line system with hydraulic connection hose and quick coupling SVK DN13 Tipping press for three-way tipping, initial lifting force approx. 30 t; 1 retaining cable Tarpaulin Plastic roll-up tarpaulin incl. aluminium tube with hand crank, side overhang of side wall approx. 400 mm, without customs closure, right-hand side in direction of travel horizontal Tarpaulin bow rope lacing, zig-zag lacing front and rear; Stop bracket and lock

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 119, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2025, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 1.310 mm, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Overall width max. 2,550 mm Loading height unladen approx. 1,510 mm Frame Central axle steel frame welded construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; Plug-in locking system for tipper body with cross-over safety lock Drawbar Assembly Cranked drawbar with height-adjustable heavy-duty screw-type towing eye, 50 mm (offset approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support Equipment Front: 1 mechanical support crank with handle on left in driving direction, Manufacturer at factory’s discretion, 1 step bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Capacity 9 t/axle, off-road version, automatic brake adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tires 385/65 R 22.5, 160K, make at factory’s discretion (road tread) 4 steel rims 11.75 x 22.5, zero offset, silver No spare tire No spare rim(s) Brake system/Suspension Brake system according to EC Directive 71/320 or ECE R13 Two-line compressed air braking system Braking system make Knorr EBS system 2S2M, 2nd axle sensor-equipped RSS - stability program Spring-applied parking brake on 2nd axle Aluminum air tanks Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines routed under drawbar Electronic air suspension with automatic lowering via inductive switch and additionally lowering lock via rotary switch on trailer Without lifting and lowering device Assistance/Safety Systems Axle load display via EBS-CAN bus signal for display on driver’s cab monitor (truck must be pre-equipped accordingly, not a calibrated scale) Hodpfoinxcqjx Ab Sew Tipper Body Steel welded construction Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 outside on front wall Special fine-grain steel floor plate 5 mm (slight floor waviness due to welding distortion possible) 5 pairs of high-foldable lashing rings 5 t (spacing between lashing rings approx. 2,320 mm) One-piece reinforced aluminium hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended swivel latch locks and spring lifting aid, also pendulum-mounted Side walls left and right with manual central locking 2 rear corner posts at sidewall height, fixed mounted on the sides Steel rear wall 4 mm (HB400), approx. 980 mm high, pendulum-mounted with recessed mounting, hooks for dosing chains (on rear wall and underside of body) Rear wall lock = automatic pneumatic lock 2 dosing chains for pendulum rear wall With sealing strips Hydraulics Single-pipe system with hydraulic connecting hose incl. SVK DN13 quick coupling Tipper ram for 3-way tipper, initial lift force approx. 30 t; 1 safety cable Tarpaulin Plastic roll-over tarp incl. aluminium tube with hand crank, side overlap approx. 400 mm, without customs lock, on right side in driving direction horizontal rope lashing, front and rear zig-zag lashing; Stop bracket and locking for rolled-up tarp on right in driving direction; Holder for crank handle Tarp fastening on left in driving direction with 2 tension belts incl. rubber pads and tension locks under the platform Tarp color similar to RAL 9006 white aluminum Lighting/Electrics 24-volt lighting unit

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 122, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2025, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, medosna razdalja: 1.310 mm, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Overall width max. 2,550 mm Loading height unladen approx. 1,510 mm Frame Central axle welded steel frame construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; Hedpsk Ttc Sjfx Ab Sew Plug-in locking system for tipper body with cross-locking safety feature Drawbar Cranked drawbar with height-adjustable heavy-duty bolted towing eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support device Front: 1 mechanical landing leg with crank on the left in direction of travel, brand at manufacturer’s choice, 1 step bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, axle load capacity 9 t/axle, off-road version, automatic brake slack adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tyres 385/65 R 22.5, 160K, manufacturer at manufacturer’s choice (road tread) 4 steel rims 11.75 x 22.5, without offset, silver No spare tyre or spare rim(s) Braking system/Suspension Braking system according to EC directives 71/320 or ECE R13 Two-line compressed air brake system Brake system brand Knorr EBS system 2S2M, 2nd axle sensed RSS - stability program Spring-actuated parking brake on 2nd axle Aluminium air reservoir Brake/air connection lines with Duomatic quick-release couplings EBS/ABS connection cable Hose lines routed beneath the drawbar Electronic air suspension with automatic lowering function via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/Safety systems Axle load display via EBS CAN Bus signal for display in the driver’s cab Tipper body Steel welded construction Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 outside on the front wall Special fine-grain steel floor plate 5 mm (Slight floor ripple due to welding distortion possible) 5 pairs of high-swing lashing rings 5 t (distance between lashing rings approx. 2,320 mm) 1-piece reinforced aluminium hollow-profile side walls 60/40 mm, approx. 980 mm high, fold-down with extended swivel lock closures and spring-assisted lifting aid, and additional pendulum function Side walls left and right with manual central locking 2 rear corner posts at side wall height, rigidly mounted to the sides Steel rear wall 4 mm (HB400), approx. 980 mm high, pendulum type with recessed mounting, hooks for metering chains (on rear wall and underbody) Rear wall locking = automatic pneumatic lock 2 metering chains for the pendulum rear wall With sealing strips Hydraulics Single-line system with hydraulic hose and SVK DN13 quick connect coupling Tipper cylinder for three-way tipping, initial lifting force approx. 30 t; 1 safety cable Tarp Plastic roll tarp including aluminium rod and hand crank, side overhang approx. 400 mm, without customs closure, on the right in the direction of travel horizontal tarp bar rope lacing, front and rear zigzag lacing; Stop bracket and securing for rolled-up tarp on the right in the direction of travel; Holder for hand crank Tarp fastening on the left in the direction of travel with 2 tension belts incl. rubber pads and tension locks on the body

Stanje: rabljeno, številka stroja/vozila: 284, lastna masa: 4.340 kg, največja dovoljena obremenitev: 13.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/1996, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.360 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 11 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 1.310 mm, barva: modra, Oprema: ABS, Drum brake Swinging steel side walls SAF axles Foldable underride guard Hodoi Dzc Dspfx Ab Sew Subject to errors and omissions

Stanje: rabljeno, prevoženi kilometri: 269.900 km, moč: 77 kW (104,69 KM), prva registracija: 02/1993, skupna masa: 7.490 kg, vrsta goriva: dizel, barva: zelen, konfiguracija osi: 2 osi, največja dovoljena obremenitev: 3.985 kg, lastna masa: 3.505 kg, velikost pnevmatike: 205/75 r17,5, medosna razdalja: 3.700 mm, vrsta prenosa: mehanski, vzmetenje: jeklo, prostornina tovornega prostora: 2 m³, širina tovornega prostora: 2.200 mm, dolžina tovornega prostora: 3.100 mm, višina nakladalnega prostora: 350 mm, številka stroja/vozila: 136, Oprema: spojka prikolice, Displacement: 3,972 cc 7 seats Jaw coupling Electrical hookup for trailer operation VIN No.: N011197 Subject to errors and omissions Hjdpfx Absi Hm Ave Sow

Stanje: rabljeno, prevoženi kilometri: 454.300 km, moč: 335 kW (455,47 KM), prva registracija: 07/2012, skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, največja dovoljena obremenitev: 13.570 kg, lastna masa: 12.430 kg, velikost pnevmatike: 385/65 R22,5 - 315/80 R22,5, medosna razdalja: 3.900 mm, zavore: retarder, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, prostornina tovornega prostora: 12 m³, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 5.100 mm, višina nakladalnega prostora: 1.000 mm, številka stroja/vozila: 204, Oprema: ABS, dodatne luči, hidravlika, klimatska naprava, nadzor oprijema, nizka raven hrupa, parkirni grelec, retarder, spojka prikolice, tempomat, zapora diferenciala, EBS Urea tank (AdBlue) Automatic climate control Sun visor 1 bed Beacon light Double-H manual gearbox Kempf steel side walls on the left, pendulum-mounted and foldable with lifting aid – right side pendulum-mounted Rear wall pendulum-mounted and designed as double-leaf door with frame 6 pairs of lashing rings 6 mm floor VIN no. 661279 Subject to errors and omissions Hsdjiuugdjpfx Ab Sew

Stanje: rabljeno, prevoženi kilometri: 426.800 km, moč: 320 kW (435,08 KM), prva registracija: 10/2012, skupna masa: 26.000 kg, vrsta goriva: dizel, konfiguracija osi: 6x4, največja dovoljena obremenitev: 11.210 kg, lastna masa: 14.790 kg, velikost pnevmatike: 385/65 R22,5 - 315/80 R22,5, medosna razdalja: 3.600 mm, zavore: retarder, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, prostornina tovornega prostora: 9 m³, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 4.600 mm, višina nakladalnega prostora: 800 mm, številka stroja/vozila: 235, Oprema: ABS, hidravlika, klimatska naprava, nizka raven hrupa, spojka prikolice, tempomat, žerjav, Colour: RAL 1007 chrome yellow Urea tank (AdBlue) Displacement: 11,946 cc Automatic climate control Atlas AK 240.2E-10.3/3/V103 with radio remote control Lück tipping body with pendulum and foldable side walls, equipped with lifting springs and lashing rings Sun visor Rotating beacons Outreach: 10.2 m = 2,040 kg / 8.2 m = 2,560 kg / 6.3 m = 3,390 kg / 4.4 m = 5,000 kg VIN no. 699934 Errors and omissions excepted Hedpfxoqrtlgo Ab Ssw