Strani Nakladač nakup rabljenega (2.023)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), skupna masa: 2.200 kg, This listing is for informational purposes only and does not constitute a legally binding offer. The H180 model is the ideal equipment for agriculture, construction, electrical, plumbing, repair, and related industries. We also guarantee equipment service after the warranty period has expired. Wheel loaders are manufactured based on and under the supervision of European engineers. The equipment features a robust design and can operate under all conditions. DIMENSIONS AND WEIGHT: Length (without attachments): 3.5 m Length (with standard bucket): 4.25 m Overall width: 1.1 m Overall height: max. 2.4 m / min. 1.7 m Operating weight (without bucket): 2,200 kg Wheelbase: 1.86 m Axle track: 1.55 m Tyres: 10.0/75 – 15.3 Nsdpfxjyk Edzj Ag Towc OPERATING PARAMETERS: Lifting height (lower edge of standard bucket): 2.8 m Maximum lifting height (top edge of carrier): 3.2 m Maximum lifting height (top edge of bucket): 3.5 m Dump height (at 45°): 2.4 m Maximum load capacity (at carrier): 1,000 kg WORK EQUIPMENT AND HYDRAULIC SYSTEM: Bucket width: 1.05 m Bucket volume: 200 litres Bucket weight: 130 kg DRIVE AND TECHNICAL SPECIFICATIONS: Engine: KUBOTA – DIESEL Engine model: D1105 Engine power: 18.2 kW – 25 hp Battery voltage: 12 V Gears: 1 Drive: hydrostatic Brakes: disc brake Parking brake: drum brake ADDITIONAL EQUIPMENT: Bucket and forks Road lighting Trailer coupling Additional hydraulic circuit Joystick control 4x4 drive Quick coupler PWG Pump Italy PRICE: €14,500 net €17,255 gross

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Razpon premera palic: 5,0 - 30,0 mm Dolžina palic: 100 - 1.000 mm Nodpfx Agsylb Hze Tjwc Zmôgljivost: maks. 60 palic/min

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 13.790 km, moč: 90 kW (122,37 KM), skupna masa: 6.950 kg, vrsta goriva: dizel, konfiguracija osi: 2 osi, poraba goriva (kombinirana): 10 l/100 km, Leto izdelave: 1979, 1600 operating hours / total mileage 13,800 km! Fuel consumption approx. 10l/100km diesel. Front loader: Schmidt FL4 with quick-attach bucket and pallet forks. Nwsdpfxsxxkk Uj Ag Toc Has been kept nearly its entire life indoors. Never used in winter. No rust on the underside. Engine: OM 352 six-cylinder, 5,638 cc, 95 hp, economical (approx. 10 liters), smooth running and retains its "original, sonorous sound." Unique vehicle—has accompanied me reliably through all construction projects without any technical failures; now the work is complete. Offered as a collector’s item or for active use. Workshop manual included. I purchased the Unimog from the original owner; I am only the second owner and have had it for 14 years. First registered November 1979. I have driven it only approx. 2,000 km. Transmission synchronizer rings should be replaced. Permissible gross vehicle weight (GVWR): 6.95 t (can be driven with an “old class 3 license”). Completely tax-exempt registration! Registered as a “self-propelled work machine (excavator).” Annual costs are only approx. €250 for insurance + MOT, no emissions test (ASU) required. Currently registered and in use with valid MOT—everything works! Given its 43-year lifespan, soft and rubber components were subject to age-related brittleness; these have been renewed: clutch master cylinder, gear shift cylinder (small/large range), 4/2-way hydraulic valve, cylinder head gasket, etc. The clutch housing is completely dry (no leaks).

Stanje: rabljeno, Leto izdelave: 2005, Dematic Roller Curve Left 90°-500-440 IR795 RA2351 Manufacturer: Dematic Direction of travel: 90° left-running Roller width (RB): 440 mm, tapered, plastic-coated Nominal/outer width (NB): 500 mm Internal radius (IR): 795 mm 3x 300-500V Frame height: 132 mm Overall height including motor: 275 mm Geared motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveying speed: 0.6 m/s Optionally available: Supports Side guides Frequency inverter for stepless speed control Nwjdpsvu Ihyofx Ag Tsc Price excl. VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, please feel free to contact us. Get in touch with us by phone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Schulz Roller Curve Conveyor, Left-Hand, with Straight Section 90°-450-390 IR1400+250-450-390 RA1186 Roller Curve: Manufacturer: Schulz Angle: 90° Usable width (NUB): 390 mm Nominal/External width (NB): 450 mm Internal radius (IR): 1400 mm Speed: v = 0.35 m/s Straight Section: Conveyor length (FL): 250 mm Usable width (NUB): 390 mm Nominal/External width (NB): 450 mm Including dual-sided side guides Nwsdpfxjk Aa H Sj Ag Tsc Rollers: low-friction, featuring tapered plastic moulded elements Transport dimensions: L x W x H = 1900 x 450 x 400 mm Transport weight: 100 kg Scope of delivery: includes double-sided side guides (without supports — supports available upon request) Optionally available: 2 pcs. double supports Height-adjustable roller level +/-100 mm Frequency inverter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or e-mail — we are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Stanje: rabljeno, Schulz gravity roller curve conveyor, right, with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Usable width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Nwjdpfek Aa Ipsx Ag Tec Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: continuous round belt, curve + straight section Scope of delivery: including double-sided lateral guide rails, without supports (supports available on request) Optional accessories: 2 pairs of double supports, height-adjustable, top of roller +/-100 mm Frequency inverter for stepless speed adjustment Price plus VAT, ex central warehouse Dr. Sonntag KG 97076 Würzburg For individual, expert advice, simply contact us. Please reach out to us by phone or email. We'll be happy to assist you in planning and implementing your projects. We look forward to hearing from you soon. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Stanje: rabljeno, Leto izdelave: 1987, Dematic roller curve left 90°-600-540 IR830 RA2368 Manufacturer: Dematic Direction of travel: 90° left-running Mounting width/roller width (RB): 540 mm, tapered, plastic-coated Nominal/outside width (NB): 600 mm Inner radius (IR): 830 mm (900 mm to plastic coating) Frame height: 140 mm Total height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available: Supports Side guides Frequency inverter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For personalized, expert advice, please contact us directly. Nwedev Dyymspfx Ag Tjc Reach out to us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Stanje: rabljeno, Schulz roller curve conveyor, right-hand version, with infeed and outfeed sections 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Usable width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 1570 mm Speed: v = 0.33 m/s Straight section: Conveyor length (FL): 2x 250 mm, infeed and outfeed Usable width (NUB): 390 mm Nominal/outside width (NB): 450 mm Rollers: galvanized Roller pitch: 75 mm Rollers: plain bearings with tapered plastic end caps Transport dimensions: L x W x H = 2000 x 800 x 400 mm Transport weight: 120 kg Scope of supply: includes side guides on both sides, without supports (please inquire if needed) Nwodpsk Aa Iajfx Ag Tsc Optionally available: - 2 double supports - height-adjustable, top of roller +/-100 mm - frequency inverter for stepless speed adjustment Price plus VAT, ex central warehouse Dr. Sonntag KG, 97076 Würzburg For individual, professional advice, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and execution of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 1987, številka stroja/vozila: 33909, Falzmaschine - Falzmaschine Stahl T52/4-4-X-SAK66 Baujahr 1987 - Serien-Nr. 33909/87-136159 Min. Falzformat: 100 x 150 mm Max. Falzformat: 520 x 820 mm Falzarten: 1. Werk: 4 Taschen – Falzbreite 500 mm 2. Werk: 4 Taschen – Falzbreite 500 mm 3. Werk: Messerfalz Anleger: max. Stapelhöhe 690 mm Auslage: Schuppenauslage SAK 66 Inklusive Kompressor Zähler – Steuerung PCS 100 Betriebsanleitungen inklusive Online-Video-Besichtigung via Skype-Video möglich Wir freuen uns auf Ihren Besuch – Weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerstandort: Emskirchen / Nürnberg – Vorführung möglich Nwodpfx Agoh Axuqj Toc

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 103638, Folding Machine / Falzmaschine Heidelberg Stahlfolder KD 78-4-KZ, Year 1999 - Serial No.: 103638-258036 - Maximum working width: 780 mm - Round pile feeder - First station: 4 folding pockets - Second station: 3 folding knives, left/right delivery - Delivery stacker: Stahl SBP 46 - Rietschle compressor - Manuals included Nsdpfx Aemikq Aog Towc - Online video inspection possible via Skype We would be pleased to welcome you for a viewing—more machines available from stock. Available immediately – machine can be inspected and tested on site. Located in Emskirchen / Nuremberg – ready for demonstration.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, barva: sivo-črna, skupna masa: 15.000 kg, največja dovoljena obremenitev: 12.700 kg, lastna masa: 2.300 kg, širina tovornega prostora: 2.500 mm, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 125 mm, Dear Sir or Madam, We are offering a brand new roll-off platform from our own production for sale. The platform is equipped with the following features: - Manufactured according to DIN standards - Pickup bracket with 50mm diameter - Hook height: 1570mm - 5mm checker plate floor / 4mm front wall thickness - Heavy-duty hook mount with surrounding plates - Reinforced IPN 180 longitudinal beams - Greaseable and replaceable external rollers - Primed and painted in RAL 7016 / anthracite - C-lock according to DIN - 5 pairs of recessed lashing eyes, each with a tensile load of 2.5t - Lateral perforated rails on both sides with 30mm holes - 6 massive, secureable inserts for compensating the vehicle tracks - Tracks recessed by 120mm (125mm floor height) - Recessed tracks approximately 4780mm long & 708mm wide each - 2 lockable steel toolboxes at the front - 2 lashing rings (5.3t load capacity each) on the inside of the front wall - 2 lashing rings (5.3t load capacity each), completely recessed into the ramp area floor - 2 warning markings according to §32 (1) StVO & DIN Nwjdpjymxqyofx Ag Tec - Including type plate and container inspection according to DGUV regulation 114-010 (formerly BGR) - Immediately available Also available with a platform length of 6.5m & 5.5m. Nationwide delivery available for an additional charge! If you are interested in other roll-off container products, we would be happy to receive your inquiry!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-21, lastna masa: 462 kg, največja dovoljena obremenitev: 1.038 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 150 mm, višina nakladalnega prostora: 300 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS K1 276 150 1500 1 Internal dimensions: 276 cm x 150 cm Side wall height: 30 cm Loading platform height: 67 cm Gross vehicle weight: 1500 kg Payload: 1059 kg Braked single-axle trailer Overrun brake and handbrake by AL-KO 1500 kg axle with brake and cooling fins Nwjdpfxsrk Iybs Ag Tec Low chassis Fully welded hot-dip galvanized steel frame Aluminium profile side walls with tension lock Side walls fold down and are removable on all sides 15 mm thick, slip-resistant and durable phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400 kg support load 6 noise-damping lashing rings with 800 kg tensile strength Reinforced 13" C-rated tyres with steel valve M+S tyres Net/rope hooks on frame 13-pin connector LED marker lights at front Rear lamps with reversing light, fog lamp, and triangular reflectors Upper frame mounted on rubber Large tipping angle of 41 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without side walls (discount available) - Side wall increase to 35 cm - Black Edition (powder-coated side walls and rims in black) - Loading ramps - U-profile for hooking in the original SARIS loading ramp - Electric tipping control - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work with the vehicle tipped - Complete LED lighting - Anti-theft device - Fine- or coarse-mesh net - H-frame - Leaf grille in various heights, also closed - 30 cm extension side walls with tension lock - Flat tarpaulin with or without bows - High tarpaulin, 160 cm or 180 cm Further accessories available on request! Plus freight to Gera and vehicle documents €200 net. Images are for illustrative purposes only and may show optional equipment subject to surcharge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate collection. Our workshop is open for all types of repairs on weekdays from 8:00 a.m. to 5:00 p.m. Specialist for axle repairs, also for caravans. Large selection of rental trailers available. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get expert advice over the phone, visit our website, or come by in person.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-10, lastna masa: 535 kg, največja dovoljena obremenitev: 1.465 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K1 276 150 2000 2 Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading platform height: 66cm Gross weight: 2000kg Payload: 1465kg Braked tandem trailer Overrun brake and handbrake by KNOTT Nsdpfxoghpcpo Ag Tjwc 2x axles with 1350kg brake capacity each Low chassis Fully welded and hot-dip galvanized steel frame Aluminium profile side panels with tension locks Drop-down and removable on all sides 15mm thick, slip-resistant and durable phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg static load capacity 8 noise-absorbing lashing eyes, each with 800kg tensile strength Reinforced 13" C-tires with steel valve M+S tires Mesh/rope hooks on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light, fog lamp and triangular reflectors Main frame mounted on rubber bushings Large tipping angle of 48 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without side panels (price reduction) - Increased side walls to 35cm - Black Edition (powder-coated side panels and rims in black) - Loading ramps - Electric tipping operation - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work with tipped body - Folding crank rear supports - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf mesh in various heights, also closed - Extension side panels 30cm with tension lock - Flat cover with or without hoops - High cover 160cm or 180cm Further accessories on request! Plus freight to Gera and vehicle registration documents €200 net Images are for illustration purposes and may show optional accessories subject to surcharge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate collection. Our workshop is open weekdays from 8:00 - 17:00 for all types of repairs. Specialist in axle repairs, including caravans. We also have a large range of spare parts and accessories for trailers of various manufacturers. Visit us online or come by in person!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-11, lastna masa: 546 kg, največja dovoljena obremenitev: 2.166 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K1 276 150 2700 2-Way Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading height: 67cm Gross vehicle weight: 2700Kg Payload: 2154Kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axles with brakes Low chassis Fully welded hot-dip galvanized steel frame Aluminum sideboards with tension locks Drop-down and removable on all sides 15mm thick, slip-resistant, robust phenolic plywood floor Additional steel plate on wooden floor Automatic support wheel with 400Kg static load capacity 6 noise-reducing lashing eyes with 800Kg tensile strength Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hooks on the frame 13-pin plug connector LED marker lights at the front Rear lights with reversing light, NSL, and triangular reflectors Upper frame mounted on rubber bushings Large rear tipping angle of 48 degrees Manual pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without sideboards (discount) - Increased sideboard height to 35cm - Black Edition (powder-coated black sideboards and rims) - Loading ramps - U-profile for attaching original SARIS ramps - Electric tipping control - Battery charger - Remote control - Bluetooth remote control Njdpfxsghpclj Ag Tjwc - Emergency hand pump in combination with electric control - Safety props for maintenance work with tipped vehicle - Full LED lighting - Anti-theft device - Fine or coarse-meshed net - H-frame - Leaf mesh sides in various heights, also enclosed - 30cm sideboard extensions with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration documents €200 net Pictures for illustration only; may show optional accessories subject to surcharge. Haven’t found the right trailer yet? We stock 50–100 vehicles permanently, ready for immediate pickup. Our workshop is open weekdays from 8:00am to 5:00pm for all types of repairs. Axle repair specialist, including for caravans. Wide selection of rental trailers. Additionally, we offer a large range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or drop by directly.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-21, največja dovoljena obremenitev: 1.062 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.560 mm, širina tovornega prostora: 150 mm, višina nakladalnega prostora: 300 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS K1 256 150 1500 1 Single-Axle Rear Tipper NEW VEHICLE Internal dimensions: 256cm x 150cm Sidewall height: 30cm Loading height: 67cm Gross weight: 1500kg Payload: 1059kg Braked single-axle trailer Overrun brake and parking brake by AL-KO 1500kg axle with brake and cooling fins Low-chassis Fully welded, hot-dip galvanized steel frame Aluminium profile side panels with tension locks Side panels foldable and removable on all sides 15mm thick, non-slip, durable phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg static load 6 noise-reducing lashing rings with 800kg pull force Reinforced 13'' C-tyres with steel valve M+S tyres Net/rope hooks on the frame 13-pin connector LED marker lights at front Rear lights with reversing light, fog lamp, and triangular reflector Upper frame mounted on rubber Large tipping angle of 41 degrees to rear Hand pump with adjustable handle OPTIONAL ACCESSORIES—PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - 100km/h package (shock absorbers) - Spare wheel with bracket - Without side panels (discounted price) - Side panel extension to 35cm - Black Edition (powder-coated black panels and rims) Nwodpfxeghpbno Ag Tec - Loading ramps - Electric tipping control - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric tips - Safety support for maintenance work with raised dump body - Folding rear supports with crank handle - Full LED lighting - Anti-theft device - Net (fine or coarse mesh) - H-frame - Leaf mesh sides in various heights, also available fully enclosed - 30cm high side extension panels with tension locks - Flat tarpaulin, with or without bows - High tarpaulin (160cm or 180cm height) More accessories available on request! Freight to Gera and vehicle registration document: €200 net Images are examples and may show accessories subject to an extra charge. Haven’t found the right trailer yet? We permanently stock 50–100 vehicles ready for immediate pick-up. Our workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialists for axle repairs, also for caravans. Additionally, we stock a wide range of spare parts and accessories for trailers by various manufacturers. Visit us online or drop by in person!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-2, lastna masa: 694 kg, največja dovoljena obremenitev: 2.006 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K3 306 170 2700 2 Three-Way Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Load platform height: 75cm Gross vehicle weight: 2700kg Payload: 2006kg Braked tandem trailer Overrun brake and handbrake from AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile drop sides with tension locks Drop sides can be folded down and removed on all sides 15mm thick, non-slip and durable phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg noseweight 8 noise-dampening lashing rings, each rated for 800kg traction Reinforced 13" C-type tires with steel valve M+S tires Net/rope hooks on frame 13-pin connector LED marker lights at the front Rear lamps with reversing light, rear fog lamp, and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 49 degrees to the rear Lateral tipping possible by repositioning safety pins Hand pump with adjustable handle U-rail for fitting the original SARIS loading ramps OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 -100km/h equipment (shock absorbers) -Spare wheel with carrier -Without side walls (discounted price) -Black Edition (powder-coated side walls and rims in black) -Integrated loading ramps 2800kg -35cm side walls -Battery charger -Electric tipper control -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric control -Safety support for maintenance work on tilted vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Nets (fine-meshed or coarse-meshed) -H-frame -Leaf mesh sides in various heights, also closed -30cm extension sides with tension lock -Flat tarpaulin with or without bows -High tarpaulin 160cm - 200cm Further accessories on request! Plus shipping to Gera and vehicle registration document: €250 net Images are for illustrative purposes and may include optional accessories subject to surcharge. Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate delivery. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist for axle repairs, including for caravans. Nodpfx Aeghpdfjg Tswc We also have an extensive range of spare parts and accessories for trailers from various manufacturers. You will also find a large selection of rental trailers with us. Visit us online or come by in person!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-4, lastna masa: 796 kg, največja dovoljena obremenitev: 2.704 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 300 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS K3 306 170 3500 2E Three-Way Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading deck height: 75cm Gross weight: 3500kg Payload: 2702kg Braked tandem trailer Overrun brake and handbrake by AL-KO Largest possible axle and brake Low chassis height Njdpfeghpc Tox Ag Tewc Fully welded, hot-dip galvanized steel frame Aluminium-profile sideboards with tension locks Sides can be folded down and removed on all sides 15mm thick, non-slip, heavy-duty phenolic plywood floor Additional steel plate on wooden floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C-rated tyres with steel valve M+S tyres Net/rope hooks on the frame 13-pin plug Front LED marker lights Rear lights with reversing light, fog light, and triangular reflector Upper frame mounted on rubber mounts Large rear tip angle of 49 degrees Side tipping via repositioning of safety pins Electric tip control with plug for charging 12V battery Electric limitation of tip angle to the side U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (discount) -Black Edition (powder-coated black sideboards and rims) -Integrated ramps 2800kg -35cm sideboards -Battery charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric control -Safety prop for maintenance work when tipped -Folding crank rear supports -Full LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Mesh sides in various heights, also closed -30cm extension sideboards with tension lock -Flat tarpaulin with or without bows -High tarpaulin 160cm - 200cm Further accessories available on request! Plus delivery to Gera and vehicle registration document €250 net Images are for illustration purposes and may show optional equipment at extra cost. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and available for immediate collection. The workshop is open on weekdays from 8:00 - 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. We also offer a large selection of spare parts and accessories for trailers from various manufacturers. You’ll also find a wide selection of rental trailers with us. Visit us online or stop by directly!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-5, lastna masa: 734 kg, največja dovoljena obremenitev: 2.766 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.840 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K1 306 184 3500 2E Rear Tipper Trailer NEW VEHICLE Internal dimensions: 306 cm x 184 cm Side wall height: 30 cm Loading platform height: 68 cm Gross weight: 3500 kg Payload: 2746 kg Braked tandem axle trailer Overrun brake and handbrake by AL-KO Strongest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tension locks All sides fold-down and removable 15 mm thick, slip-resistant and robust phenolic plywood flooring Additional steel plate on wood floor Automatic jockey wheel with 400 kg support load 8 noise-reducing lashing eyes with 800 kg tensile force Reinforced 13" C-rated tires with steel valves M+S tires Mesh/rope hooks on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light, fog light, and triangular reflector Upper frame mounted on rubber cushions Large tilting angle of 51 degrees to the rear Electric tipper control with charging plug for 12V battery OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without side panels (price reduction) - Side wall height increase to 35 cm - Black Edition (powder-coated side panels and rims in black) - Integrated loading ramps 2800 kg - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump - Safety support for maintenance work on tipped vehicle - Foldable crank rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf mesh sides in various heights, also closed - Additional side panels 30 cm with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160 cm - 200 cm Further accessories available on request! Plus freight to Gera and vehicle registration documents €250 net Pictures are examples and may show optional, extra-cost accessories. Can't find the right trailer? We have 50–100 vehicles in stock, always ready for immediate collection. Our workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Axle repair specialist, also for caravans. Nedpfxsghpc Ns Ag Tewc We also offer a wide range of spare parts and accessories, including for trailers from various manufacturers. You will also find a variety of rental trailers with us. Visit us online or come by in person!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-14, lastna masa: 627 kg, največja dovoljena obremenitev: 2.073 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K1 306 170 2700 2 Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading height: 66cm Gross weight: 2700kg Payload: 2073kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x 1350kg axles with brakes Low-chassis design Fully welded, hot-dip galvanised steel frame Aluminium profile side walls with tension locks Drop and removable on all sides 15mm thick, non-slip, heavy-duty phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg static load 6 noise-dampening lashing rings with 800kg tensile strength Reinforced 13" C-type tyres with steel valves M+S tyres Net/rope hooks on frame 13-pin plug Front LED marker lights Rear lights with reverse light, fog light, and triangular reflector Top frame mounted on rubber bushings Large rear tilting angle of 51 degrees Hand pump with adjustable handle OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - Equipment for 100km/h speed rating (shock absorbers) Nwedjghpcaepfx Ag Tec - Spare wheel with holder - Without side walls (discount available) - Side wall height increase to 35cm - Black Edition (powder-coated side walls and rims in black) - Integrated loading ramps, 2800kg capacity - Electric tipping mechanism - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric mechanism - Safety support for maintenance work with tilted body - Folding crank rear supports - Full LED lighting - Anti-theft device - Fine- or coarse-mesh net - H-frame - Mesh sides in various heights, also available fully enclosed - Extension side walls, 30cm, with tension locks - Flat tarpaulin with or without bows - High tarpaulin, 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle documents €200 net Images are for illustration purposes and may show optional, extra-cost accessories. Haven't found the right trailer yet? We stock 50-100 vehicles, always ready for immediate pickup. The workshop is open weekdays from 8:00 to 17:00 for all kinds of repairs. Axle repair specialist – also for caravans. Large selection of rental trailers. Additionally, we offer a large range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by in person.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-25, lastna masa: 886 kg, največja dovoljena obremenitev: 2.614 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.560 mm, širina tovornega prostora: 1.840 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K3 356 184 3500 2E Three-way Tipper Trailer NEW VEHICLE Internal dimensions: 356cm x 184cm Side wall height: 35cm Loading platform height: 75cm gross weight: 3,500kg payload: 2,614kg Braked tandem trailer Overrun and hand brake by AL-KO Maximum axle and brake configuration Low chassis Fully welded, hot-dip galvanised steel frame 35cm aluminium profile side walls with tension locks Drop-down and removable on all sides 15mm thick, non-slip and robust phenolic plywood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing points with 800kg tensile force Reinforced 13" C-tires with steel valves M+S tires Net/cable hooks on frame 13-pin plug LED marker lights at the front Tail lamps with reverse light, fog light, and triangular reflector at the rear Upper frame mounted on rubber bushings Large rear tipping angle of 41 degrees Side tipping possible by repositioning safety pins Electric tipping control with plug-in charger for 12V battery Electric limitation of side tipping angle U-rail for attaching original SARIS ramps OPTIONAL ACCESSORIES PERMANENTLY REDUCED FROM FEBRUARY 2026 -100 km/h equipment (shock absorbers) -Spare wheel with holder -Without side walls (price reduction) -Black Edition (powder-coated side walls and rims in black) -Integrated ramps, 2800kg capacity -Extended tipping angle up to 52 degrees (5-stage cylinder) -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric control -Safety supports for maintenance when trailer is tipped -Folding crank rear supports -Full LED lighting -Theft protection -Nets, fine or coarse mesh Nsdpfxeghpa Uj Ag Towc -H-frame -Mesh cages in various heights, also closed -Additional side walls, 30cm, with tension locks -Flat tarpaulin with or without bows -High tarpaulin, 180cm or 200cm Further accessories available on request! Plus shipping to Gera and vehicle registration document: €250 net Images are for reference only and may show chargeable accessories. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available from stock. Our workshop is open weekdays from 8:00 to 17:00 for all kinds of repairs. Specialists for axle repair, including caravan trailers. Additionally, we offer a wide range of spare parts and accessories, including for various trailer manufacturers. Find a large selection of rental trailers with us. Visit us online or stop by in person!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/1988, Leto izdelave: 1988, Technically sound Loading area 6.20 m Nwodpfx Aopuhpwjg Tsc

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 80,9 kW (109,99 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, skupna masa: 8.000 kg, lastna masa: 8.000 kg, obratovalna teža: 8.000 kg, največja dovoljena obremenitev: 2.500 kg, dvižna moč: 2.500 kg/m, dvižna višina: 2.800 mm, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, emisijski razred: Euro 5, Leto izdelave: 2025, Backhoe Loader GG30BC Backhoe Loader The GG30BC backhoe loader is a robust and reliable machine, designed for construction and industrial applications. With a payload capacity of 2,500 kg and an operating weight of 8,000 kg, this machine delivers outstanding stability and efficiency. The loader bucket, measuring 2,200 mm wide with a capacity of 1.3 m³, enables fast and efficient loading operations. Engine and Drive System The machine is equipped with a modern YUCHAI YCF36110-S500 engine (81 kW). Its mechanical transmission with fixed drive axle features 2 forward and 2 reverse gears, ensuring optimal vehicle control. The maximum travel speed is 24 km/h, allowing efficient movement around the job site. Hydraulic and Braking System The advanced hydraulic system operates at a pressure of 22 MPa, delivering a breakout force of 46.5 kN for the grapple and 31 kN for the bucket. The standard digging depth is 4,000 mm and can be increased up to 5,500 mm with an optional telescopic arm. The machine is fitted with a pneumatic-hydraulic brake system featuring an emergency stop function, significantly enhancing operational safety. Working Range and Dimensions The GG30BC offers a dump height of 2,800 mm, a reach of 1,062 mm, and a swing angle of 190°. Maximum drawbar pull is 39 kN and breakout force is 38 kN. With a minimum ground clearance of 300 mm, the machine performs excellently on difficult terrain. Overall dimensions are 7,600 × 2,260 × 2,890 mm, with a turning radius of 6,581 mm at a steering angle of ±36°. Specifications - Engine model: Euro 5 YUCHAI ENGINE-YCF36110-S500 - Rated power: 81 kW (110 hp) - Weight: 8,000 kg - Payload: 2,500 kg - Transmission type: Mechanical transmission with fixed power drive - Gears: 2 forward, 2 reverse - Maximum speed: 24 km/h - Tires: (F) 14-17.5 (R) 19.5L-24 - Steering brand: FEICHENG YUNYU - Steering system working pressure: 12 MPa - Front tire pressure: 0.22 MPa - Main transmission type: Reduction - Final drive: Single-stage final reducer - Brake system operation: Pneumatic brake clamp over oil, external, self-adjusting, self-balancing - Hydraulic system pressure: 22 MPa - Grapple breakout force: 46.5 kN - Bucket breakout force: 31 kN - Brake type: Self-leveling - Emergency brake operation: Manual—parking brake with end force - Loader bucket capacity: 1.3 m³ - Loader bucket width: 2,200 mm - Backhoe bucket capacity: 620 mm - Loader dump height: 2,800 mm - Loader dump reach: 1,062 mm - Maximum digging depth: 4,000 mm - Optional digging depth: 5,000–5,500 mm (with telescopic arm) - Minimum turning radius: 6,581 mm - Dipper swing angle: 190° - Maximum drawbar pull: 39 kN - Breakout force: 38 kN - Minimum ground clearance: 300 mm - Wheelbase: 2,250 mm - Steering angle: ±36° Njdpfx Agsxr Ru He Tewc - Working pressure: 12 MPa - Length: 7,600 mm - Width: 2,260 mm - Height: 2,890 mm

Stanje: rabljeno, Leto izdelave: 2014, Pregled Ta robotski paletizator je bil izdelan leta 2014 pri nemškem proizvajalcu Kuka. Stroj ima 2 različni prijemalni glavi za ravnanje s KEG-i in plastičnimi zaboji. Opremljen je s 6 osemi in je v dobrem stanju. Stroj je bil letno vzdrževan, leta 2025 pa bo demontiran. Tehnični podatki Zmogljivost Odvisno od tvorbe slojev Opremljen za obdelavo: KEG-ov Modularnih zabojčkov Nsdpfxjyb Ryce Ag Tswc

Stanje: novo, številka stroja/vozila: 06b624786df9f4b5c196a36b0, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285 / 70 r 19,5, Further information Chassis Central axle tipping trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball tipping bearing 2-speed gear support leg at the front Foldable rear support Wheel chocks with holder Steel underride guard Rear splash guards across the full width Quarter shell mudguards Lockable storage compartment for loading ramps beneath the loading area Drawbar device for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) Wheels and Tires 285 / 70 R 19.5 Manufacturer’s choice Steel rims, factory silver Braking system 2-line air brake system Spring-actuated parking brake 2 interlock-proof coupling heads at the front, with connecting lines to the tractor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrics 24 Volt, multi-chamber lamps, yellow side LED lighting 2 white position lights in front 2 white/red lane marker lights at the rear All lamps in LED version (Note! With certain towing vehicles, diagnostic errors may occur, although functionality is ensured) 1 x 15-pin plug at the front, with connecting cable Hydraulics Nwjdsi Ri Ipjpfx Ag Tec Three-way tipping system, hydraulic multi-piston press with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without flow restrictor. If required, this must be retrofitted on the truck. Operation hydraulic via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper body Sturdy tipping body with 4 mm steel plate floor, steel drop sides, continuous, foldable and pendulum-mounted with central locking at the bottom. Corner stanchions at the rear plug-in. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 bottom hinges. Side wall return springs (not possible with split side walls) Rear wall pendulum-mounted and as 2-wing door (not foldable), with door retainer and side protective rubber Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 t Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white on side and red at rear Paintwork Frame hot-dip galvanized including passivation; 15-year warranty against rust-through Side walls/body RAL 3002, carmine red Note! Body inside only primed! Attention: Archive images!

Stanje: novo, številka stroja/vozila: e763c8c2bb3370bd2342236a4, lastna masa: 3 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearings Gearbox support leg at the front 2 wheel chocks with holders Steel underride protection Lockable storage compartment for loading ramps beneath the loading area Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension Euro axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tyres Nwedji Rizbepfx Ag Tjc 235 / 75 R 17.5 Manufacturer’s choice Factory silver steel rims Braking System 2-line air brake system with color-coded line routing for easy service. Hand spindle parking brake Integral air reservoir Without ABS but with mechanical automatic load-dependent braking (ALB), max. 60 km/h registration 2 swap-proof coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connection cable extended by approx. 60 cm Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limitation and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipping body Robust tipping body with 4 mm steel plate floor, steel side wall construction, continuous side walls, fold-down and pendulum-mounted with central locking at the bottom. Detachable corner posts at the rear. Tailgate fold-down and pendulum mounted, with central locking at the bottom. Bed length approx. 4,500 mm, side walls with 5 bottom hinges. Bed width 2,420 mm 5 pairs of lashing eyes in the floor, each rated at 5 t Operational notes The specified gross weight is technically achievable; depending on the cargo, the gross weight may not be attainable when observing permissible axle/support/kingpin loads. (Poor driving or trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra inspection and certificate, for max. 60 km/h registration, towing vehicle LoF, (country of registration Switzerland max. 40 km/h possible) Prepared for single-line number plate holder Without contour marking / reflective tape as per ECE R 048, Paintwork Frame hot-dip galvanized including passivation, 15 years warranty against corrosion Side/tipper body RAL 3002 carmine red Note! If body is galvanized, it will not be painted! Note! Inside of body is only primed! Wide tyres available at extra charge: 355 / 60 R 18, loading height approx. 980 mm Attention: Archive pictures!