Formatna žaga

SCM L´invincibile SI X

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 14.612 h, Pogon: kolesa Znamka motorja: Deutz Dolžina ročice žlice/ lopate: 250 cm Nlodpfx Ajyyt Uhobrec Za dodatne informacije se obrnite na Kristoffa Van Havereja.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 146 h, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodni tok: 35 A, največja višina reza: 204 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, vrsta nastavitve višine: električni, vrsta aktuacije: električni, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 2.000 obr/min, višina mize: 910 mm, leto zadnje generalne obnove: 2026, Oprema: CE označba, dokumentacija / priročnik, dozator, vrtilna hitrost brezstopenjsko nastavljiva, zaščitni pokrov žaginega lista, Altendorf F 45 EvoDrive plus (Skupna cena €52.050,-) + Miza z zračno blazino + Laserski prikaz reza Stroj s samo 150 delovnimi urami iz dvočlanskega podjetja se zaradi preoblikovanja prodaja po ugodni ceni - CNC vzdolžno vodilo 1300 mm z ojačano razširitvijo delovne mize - Ojačan motor 7,5 kW z VARIO regulacijo hitrosti 2.000 - 6.000 min⁻¹ brezstopenjsko - Povečana višina reza 204 mm - 2-osni predrezalnik z LED opozorilno lučko v nevarnem območju Nsdpezbc Uxefx Abrslc - Razširitev prečnega drsnika, izvlečna - Kotno-nagibno vodilo z DIGIT LD, rezanje do dolžine 3200 mm - Ojačana podaljšava 840 mm - Vklop/izklop na drsnem vozičku - Sprednji podporni valj - Orodjarna

Stanje: dober (rabljeno), Koda: 0322 Znamka: SCM Model: L'INVINCIBILE SI 3 – CE standard Elektronska formatna žaga z upravljano osjo, nagibnim rezilom in podrezovalno enoto, namenjena za pohištvo, obdelavo plošč, izdelavo pohištva po meri, vrata, lesena okenska okvirja, kuhinje, kopalniško pohištvo, plastiko, kompozitne materiale in različno drugo – CE standard – leto 2017 Tehnični podatki: - Voziček v celoti iz aluminija s kontaktnim drsnim sistemom po kaljenih in brušenih jeklenih vodilih - Elektronska upravljalna enota EASY TOUCH 12: 12-palčni barvni ravni zaslon – Neposredno upravljanje naslednjih osi z ročnim, ročnim inkrementalnim, polavtomatskim in avtomatskim načinom: dvig glavnega rezila, nagib rezilne enote, premik paralelnega vodila, dvig in pomik podrezovalnega rezila. Pomoč operaterju z grafično podporo. Baza podatkov orodij - Pomožna funkcija za operaterja na elektronskem upravljalniku - Stensko nastavljiva upravljalna plošča - Podrezovalna enota z lastnim motorjem - Dolžina formatnega vozička: 3800 mm - Premer glavnega rezila: 400 mm - Premer podrezovalnega rezila: 120 mm - Nagib rezila: 0-45 stopinj - Maksimalna višina reza pri 90°: 140 mm - Maksimalna višina reza pri 45°: 97 mm - Hitrost vrtenja rezila: 3000/4000/5000 min⁻¹ - Hitrost vrtenja podrezovalnega rezila: 8500 min⁻¹ - Moč motorja glavnega rezila: 9,5 KM Nlodpfsytufgjx Abrjc - Moč motorja podrezovalnega rezila: 1,7 KM - Širina reza do paralelnega vodila: 1500 mm - Programirani paralelni vod s THK vodenjem - Elektronska nastavitev podrezovalne enote - Pravokotni okvir s sistemom ‘COMPEX’ za poševne reze z avtomatsko kompenzacijo položaja prislona - Start/stop tipke integrirane v vozičku - Ekscentrična roka za vpenjanje obdelovanca - Podaljšek delovne površine - Pravokotno vodilo s 3 LCD prikazovalniki za položaje prislona - Popolna podpora in brezžična povezava: nastavljiv okvir za poševne reze s popolno brezžično funkcijo - Premer odsesovalne cevi: spodaj 120 mm, na zgornjem zaščitnem pokrovu 100 mm - Skupne mere sestavljenega stroja: 4200 × 4300 × 1800 mm (V x Š x G) - Mere za transport: 4200 × 2350 × 1800 mm + paleta 1600 × 1000 × 800 mm - Masa: 1140 kg

Stanje: rabljeno, številka stroja/vozila: 008394, Najv. širina plošče: 3800 mm Njdpfx Aeygtbtsbrolc Najv. dolžina plošče: 3800 mm Najv. izstop glavnega žaginega lista: 55 mm Število vpenjal: 4

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension Nljdev Erkaspfx Abrjc T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: zelo dobro (rabljeno), Spodnja vretenasta rezkalka SCM T150 Premer vretena: 35 mm Skupna dolžina vretena: 180 mm Električni dvig vretena Električni pomik vodila Električno nastavljiv kot -10/45° Spremenljiva hitrost vretena: 3000-4500-6000–7000-10000 vrt/min Moč motorja: 5,5 kW Nledow Ral Hepfx Abrjc Tehnična dokumentacija DTR

Stanje: rabljeno, Leto izdelave: 2021, Numerical control MEGA 300 TS Panel height 60 mm PVC/ABS up to 3 mm Feed speed up to 22 m/min Electronically adjustable working height via CNC Motorized pressure belt with increased pressure Infeed system for small panels Panel support guide with electronic CNC adjustment Side roller conveyor with idle rollers for panel support Anti-adhesive unit Straightening unit with two electronically adjustable CNC motors Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA adhesive with glue tank and premelter Pressure roller group for straight profiles with electronically adjustable CNC pressure rollers Anti-adhesive group Milling unit with 2 motors and automatic tilt adjustment End trimming unit with 2 vertically stacked motors Trimming/corner rounding group with 2 tilting motors electronically adjustable via CNC Nedpfet Hal Djx Abrelc Corner rounding unit with 4 motors Edge scraper unit electronically adjustable via CNC Glue scraper unit Oscillating brush unit Hot air dryer unit

Stanje: rabljeno, številka stroja/vozila: 008502, Maks. širina panela: 3800 mm Maks. dolžina panela: 3800 mm Maks. izstop glavne žage: 115 mm Število vpenjalnih čeljusti: 11 Nledpfx Asy Edp Hebroc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Spindle swivel: Yes, 0 to 45° Height adjustment: Handwheel / electric Swivel adjustment: Handwheel / electric Cutter fence adjustment: manual Nledpfjuzkxxjx Abrjc Height display: digital readout Swivel angle display: digital readout Fence display: mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 3.200 mm, premer orodja: 400 mm, premer vretena: 50 mm, pomik vretena: 640 mm, največja hitrost vretena: 3.000 obr/min, dolžina vretena za rezkanje: 320 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: Klimatska naprava, delovna višina: 130 mm, delovna širina: 200 mm, SCM Windor 60/100 – Angular Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Plant Description This production line is a window and door manufacturing line of the type Windor 60/100 by SCM Group, year of manufacture 2005. It is a CNC-controlled angular processing centre designed for industrial machining of frame and sash components. The system is engineered for series production, enabling precise and reproducible machining through integrated process steps. 2. Main Components of the System 2.1 Angular Processing Centre SCM Windor 60/100 The SCM Windor 60/100 features a modular design and is constructed as an angular system. Machining takes place on a tenoning side and a profiling side arranged at right angles to one another. The plant combines multiple operations such as milling, drilling, grooving, rebating, and tenoning in a continuous CNC-controlled process. Key Features: * CNC multi-side machining Nlodpfx Asx Nqqxjbrsc * Multiple milling and processing spindles * Automated tool guidance and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and serves for the precise drilling of joints and hardware fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile milling operations, consisting of two processing sides: Right Side: * Lifting spindle with height adjustment * For variable profile and contour processing Left Side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling tasks 2.4 Löwer Surface Sander A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding and improves the surface quality of the machined components. 3. Control, Operation, and Safety The plant is equipped with a CNC control system, which manages all machining sequences, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained specialist personnel. The safety features correspond to the state of the art at the time of installation (year 2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, installation of a 10-spindle SCM Topset XL planer is intended. The machine will be operated as a stand-alone processing station at a separate location within the production hall and will not be directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07/01/2026