Kompakten Pogonom Na Vsa Kolesa Traktorja nakup rabljenega (28.109)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 235,36 kW (320,00 KM), konfiguracija osi: 4x4, gorivo: dizel, barva: rdeča, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, Leto izdelave: 2025, Oprema: airbag, centralno zaklepanje, klimatska naprava, pogon na vsa štiri kolesa, spojka prikolice, zapora diferenciala, From our range of new vehicles, we offer you: TLF 4000 All-Wheel Drive on Off-Road MAN TGM 18.320 All-Wheel Chassis Our Water Buffalo on MAN There is hardly any terrain too difficult for it. Calmly and powerfully, it transports its loads safely to their destination. And at the incident scene, it demonstrates its strengths by bringing crew, equipment, and sufficient extinguishing agents to the operation together with a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single, track-matching tires for high off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA holders in the crew compartment Body: • High-quality, frame-constructed body made of rust- and corrosion-free material • Fold-out steps for each side equipment compartment • Individually configured stainless steel equipment mounting to your specifications • Walkable, slip-resistant vehicle roof Vehicle Pump/Extinguishing Agent Tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP&ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • Water tank 5,000 l with integrated foam agent tank 500 l • Additional heater in the pump compartment Firefighting Equipment: • High-pressure rapid intervention reel with 50 m form-stable hose • Foam/water monitor 2,000 l/min mounted on the vehicle roof • Self-protection system with 4 extinguishing nozzles in front of the wheels Safety and Lighting: • LED lightbar on the vehicle roof/2 LED front flashers • Pneumatic special signal system Martin horn • 100 W PA system with announcement unit • Reversing camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on the body and additional headlights • Pneumatic LED light mast with remote control • Hygiene board available on request We will be happy to provide you with a specific offer and present the vehicle to you in detail at our Berlin location. Gsdpfx Asxzu Ehjgyobi All information to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 375,1 kW (509,99 KM), konfiguracija osi: 4x4, gorivo: dizel, emisijski razred: Euro 6, Leto izdelave: 2025, Oprema: airbag, dodatne luči, parkirni grelec, spojka prikolice, From our range of new vehicles, we offer you: TLF 3000 All-wheel drive on an off-road MAN TGM 13.290 all-wheel chassis Ideally suited for small and medium-sized fire departments in rural areas, seeking a compact and robust vehicle to handle diverse tasks while requiring a large water reserve. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission Gbjdexyunaopfx Agyei • Single tires with same track width for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • 4 standard breathing apparatus holders in crew compartment Body: • Premium frame construction made of stainless, corrosion-resistant materials • Folding steps for each side equipment compartment • Custom stainless steel equipment mounts configured to your requirements • Walkable, anti-slip vehicle roof Vehicle pump/extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump FPN 2000-10 • PUMP&ROLL capable • Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating system in the pump compartment Firefighting equipment: • High-pressure rapid intervention system with 50 m rigid hose • Foam/water monitor with 2,000 l/min output mounted on roof • Self-protection system with 4 extinguishing nozzles in front of wheels Safety and lighting: • LED roof bar / 2 LED front flashers • Pneumatic Martin-Horn special signalling system • 100 W PA system with loudspeaker unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on body and additional spotlights • Pneumatic LED lighting mast with remote control • Hygiene station on request We would be pleased to provide you with a detailed quotation and present the vehicle to you at our facility in Berlin. All details to the best of our knowledge and belief, without guarantee for completeness or accuracy. This listing does not constitute an offer but is for informational purposes only. Subject to prior sale!

Stanje: rabljeno, prevoženi kilometri: 169.715 km, moč: 110 kW (149,56 KM), prva registracija: 06/2020, vrsta goriva: dizel, največja dovoljena obremenitev: 955 kg, skupna masa: 3.200 kg, velikost pnevmatike: 16 Zoll, barva: srebrn, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 5, dolžina tovornega prostora: 1.500 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 1.400 mm, Leto izdelave: 2020, število prejšnjih lastnikov: 1, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), klimatska naprava, letne pnevmatike, meglenke, nadzor oprijema, navigacijski sistem, parkirni grelec, parkirni senzorji, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, The vehicle is in top technical and visual condition. All vehicles for sale are inspected and serviced in our master automotive workshop. Non-smoking vehicle Equipment: First owner, ABS, ASR, Electronic Stability Program (ESP) with brake assist, 7-speed DSG automatic transmission, driver’s airbag, passenger airbag, passenger airbag deactivation, side airbags, all-wheel drive, third brake light, electrically adjustable exterior mirrors, electric windows, headlight range adjustment, cornering lights, remote central locking and immobiliser, interior electric lock, 2-zone climate control, Climatic semi-automatic air conditioning plus second evaporator, programmable auxiliary air heater, additional heater, second cabin heater, hands-free system, multi-function onboard computer, height-adjustable driver’s seat, manually adjustable lumbar support for left front seatback, split rear bench (second row), cup holder, power steering, adjustable steering wheel, electronic cruise control (GRA), second battery, rear parking sensors, ‘Discover Media’ navigation system, DAB radio, Bluetooth, voice recognition, external audio connection, Aux-in, USB type A, 1x USB port, external connectivity interface, sliding doors on both left and right in load/passenger area, heated rear window with rear wiper, summer tyres, lashing eyes in load compartment, load compartment cladding, plywood floor, rubber floor, extra lashing points for cargo, tinted windows, dark tinted glass in rear (Venus35/Privacy), front sliding windows, sealed rear windows in load/passenger area (left and right), 16-inch wheels, tyre pressure monitoring, towbar, roof ventilator for load compartment ventilation, EURO 6, extras totalling €8,900. Total weight: 3,200 kg; payload: 941 kg; towing capacity: 2,500 kg Load compartment internal dimensions: length: 1.50 m, width: 1.65 m, height: 1.40 m We will gladly accommodate your requests and can carry out various retrofits in our workshop: Upgrade auxiliary heater (remote control) from €600; rear view camera from €600 Gbjdpfxjuu Nbqs Agyoi 1 year ‘Auto Helle’ warranty according to warranty certificate. Last 5W30 long-life oil service at VW at 115,956 km in May 2023 New air conditioning service Current technical inspection Full service history / digital service record Timing belt kit and water pump, serpentine belt and tensioner, crankshaft oil seal, front and rear brake discs and pads, air and pollen filter, automatic transmission oil change, all replaced at 133,907 km Repair, service, and preparation costs included in the purchase price. Bank financing possible Subject to changes and errors.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 235,36 kW (320,00 KM), vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 4x4, gorivo: dizel, barva: rdeča, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: airbag, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, spojka prikolice, zapora diferenciala, From our range of new vehicles, we offer you: TLF 5000 All-Wheel Drive on off-road capable MAN TGM 18.320 All-Wheel Drive Chassis Our vehicle for major operations! In addition to a 5,000-liter water tank and 500 liters of foam, it features a highly efficient pump and additional space for both personnel and equipment. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW), automatic transmission • All-terrain tires, twin tires on rear axle for enhanced driving stability Cab: • Standard crew cabin (1:5) painted in RAL 3000 (fire red) • Air conditioning and auxiliary heating • Standard 4 PA mounts in the crew compartment Body: • High-quality superstructure in frame construction made of rust and corrosion-free material • Fold-out step boards for each side equipment compartment Gbodpfx Agexgiifsysi • Individually configured stainless steel equipment holders, tailored to your requirements • Walkable, non-slip vehicle roof Vehicle Pump / Extinguishing Agent Tank: • Maintenance-free combined low/high-pressure pump FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam proportioning system • Water tank: 5,000 l with integrated foam tank: 500 l • Additional heater in the pump compartment Firefighting Equipment: • High-pressure rapid intervention system with 50 m rigid hose • Foam/water monitor (2,000 l/min) on the vehicle roof • Self-protection system with 4 extinguishing nozzles in front of the wheels Safety and Lighting: • LED lightbar on vehicle roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W loudspeaker system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on the body and additional spotlights • Pneumatically operated LED light mast with remote control • Hygiene board available on request We are happy to provide you with a detailed quote and present the vehicle to you at our facility in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This description does not constitute an offer, but serves as information only. Subject to prior sale!

Stanje: novo, Leto izdelave: 2021, Stihl Lawn Mower 53 cm Petrol RM 655.1 VS The STIHL petrol lawn mower RM 655 VS is a true powerhouse, not least thanks to its robust aluminium chassis. Featuring Vario-wheel drive and a 53 cm cutting width, it is ideally suited for maintaining large lawns. The centrally positioned seven-level cutting height adjustment allows you to choose a grass height between 25 and 85 mm. To make your work easier from the start, its engine is equipped with the ReadyStart system for reliable starting. While mowing, the powerful engine maintains a constant speed, even when the pace changes, and its mono-comfort handlebar ensures effortless handling. Another highlight is the blade brake clutch (BBC) on the RM 655 VS: this mechanism disengages the mowing deck from the engine, so you can pause mowing without restarting the motor. The foldable 70-litre grass catcher basket with fill level indicator can be emptied easily. With this petrol lawn mower, you are choosing a dependable companion for your gardening tasks. Technical data: • Aluminium chassis with abrasion protection strips • Guaranteed sound power level LWAd [dB(A)]: 98 dB(A) • Weight: 50 kg • Grass catcher box capacity: 70 l • Displacement: 173 cm³ • Foldable grass catcher box with fill level indicator • Comfort handlebar • Easy-running wheels • Blade Brake Clutch (BBC) • Engine with easy-start system (ReadyStart) • Engine type: Series HD775 OHV SC • Mulching function & Multi-blade • Rated speed of working tool: 2800 rpm • Rated power output: 2.6 kW / 3.5 hp • Recommended lawn area: up to 2500 m² • Cutting width: 53 cm • Cutting height: 20-85 mm • Super-soft grip • Uncertainty KpA [dB(A)]: 2 dB(A) • Vario-wheel drive • Vibration at handlebar ahw: 3.8 m/s² • Vibration uncertainty K: 1.9 m/s² • Central cutting height adjustment The lawn mower is new and unused. It has only been on display in our showroom and may show minor signs of storage. Shipping by standard parcel service is not possible due to its size and weight. Delivery within Germany (excluding island surcharges) is €79 net. International shipping is available on request; please ask for specific rates. We ship exclusively within the EU. No shipping outside the EU. You will receive an invoice with shown VAT. Payment by bank transfer only—NO PAYPAL! Gbedpfx Astvf R Ejgyji

Leto izdelave: 2009, stanje: dober (rabljeno), Tirni voz, platformni voziček, transportni voziček za težke tovore, transportni voziček, voziček za težke tovore, električni težki tirni voziček, tirni voziček, prikolica -Proizvajalec: Seacom, tirni voziček z pogonom -Tip: GWN 40t -Povečanje mase: dva tirna vozička v sklopu do 80t z ID36864 -Platforma: 4000 x 2500 mm -Nosilnost: 40.000 kg Godpfxsyam H As Agyebi -Pogon: z električnim reduktorskim motorjem -Tirna širina: 1500 mm (1420/1580) -Širina kolesne steze: 80 mm -Skupne dimenzije: 4060/2500/H770 mm -Lastna teža: 2400 kg

Stanje: rabljeno, Double diaphragm pump with pneumatic drive DEPA Type DH40-FA-ZRT Air-operated diaphragm pump, twin pump Serial No.: B1802498 Year of manufacture: 09.05.2018 Maximum temperature: 130°C Size: 40 Maximum particle size: 16 mm Suction lift: approx. 2 m Suction lift when primed: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/8" Suction connection: 1 1/2" Discharge connection: 1 1/2" - self-priming - aluminium housing Godpfx Ageib D H Uoyebi - diaphragm plates made of stainless steel - diaphragm made of nopped E4® PTFE composite - balls made of PTFE - ball seats made of stainless steel Required installation space (L x W x H): 370 x 270 x 450 mm Net weight: 15 kg Very good condition

Stanje: novo, TECHNICAL DATA Type: gas-heated pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Max. loading weight: approx. 2.5 t Gbsdpfx Ageg Dgymeyoi Control system: Siemens S7

Stanje: skoraj kot novo (rabljeno), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Machine XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spray System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. The device is designed to simulate sunlight, weather, and climate influences, and is used worldwide in research, quality control, and material testing. Special features: - Professional device for UV and weather resistance testing - Ideal for laboratories, industry, and quality assurance - Fully functional, incl. comprehensive technical documentation Technical data & features: - Weathering and lightfastness tester with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) to adjust spectral distribution Gbodpfx Asw Thyksgyoi - Humidification and spray system (ultrasonic humidifier, spray bars) - Measurement system with XENOSENSIV sensor for irradiance and black standard temperature monitoring - Integrated touch display for control and programming - Pre-programmed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely definable test programs - Documentation possible via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications; information is non-binding!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Catalogue number 7275 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height: 200 mm From above: - Feed roller, toothed - Anti-kickback fingers - 2 pressure rollers - Feed roller, toothed - Pressure roller - 610 mm planing head, 4-knife, 7.5 kW - Pressure rollers - Feed roller, smooth From below: - Guide bar - Adjustable infeed table with split smooth sliding roller - 610 mm planing head, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure From the rear: Gbedpfx Ageytdkxsyoi - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Maximum planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle 160 mm, adjustable up/down + left/right + angle, approx. 4 kW - Possibility to plane with additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers in lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction nozzle diameter: 120 mm - Dimensions (L/W/H): 2550 x 1700 x 1350 mm - Weight: approx. 3000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, flooring, etc. - 2 horizontal planing heads + 2 vertical spindles + 1 horizontal spindle - Cutterheads included - German-made, brand KUPFERMUHLE - Used planer in very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (depending on 4.2 EUR rate) (Prices may vary depending on exchange rate fluctuations)

Stanje: rabljeno, Offer consisting of: Creasing machine Upon request, we can arrange the following for you: Gbjdpfx Aju Srw Rogyoi Packaging, loading, transport (by ship or airplane), including customs clearance.

Stanje: dober (rabljeno), For sale: CRATHERN, PERONDI IA630, NA 900. Gsdpfxsud Axgj Agysbi

Stanje: zelo dobro (rabljeno), Catalogue number: 7640 FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer in very good condition Gbjdpfsyaq Taox Agysi TECHNICAL DATA - Max planing width: 610 mm - Max planing height: 200 mm - Top section: - Geared infeed roller - Kickback fingers - Pressure beam - 2 geared feed rollers - Pressure beam - Planing shaft: 610 mm, 6 knives, 15 kW - Pressure beams - Outfeed smooth feed roller - Bottom section: - Side pressure at infeed - Guide rail - Infeed table - Geared feed roller - Planing shaft: 610 mm, 6 knives, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear section: - 2 side spindles + pressure systems: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW (electronically adjustable left/right) - Spindle diameter: 40 mm - Spindles adjustable alternately - Spindles adjustable up/down, left/right 3) Additional lower horizontal spindle 160 mm, adjustable up/down + left/right, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal idler rollers, 2 lower rubber-driven rollers - Adjustable rollers in lower table - Electric adjustment of planing height - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120 mm, 2×160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (subject to 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 01254653, Linija za proizvodnjo lesenih delov za leseno-jeklene varovalne ograje TERTU. - utorni stroj T18 - utorni stroj za stebre - čelilna žaga - finalizacijski stroj (krajšanje, vrtanje) - podajalne mize - vrtalna miza - 4x rezervna glava - komplet rezervnih nožev in svedrov Preprosti, zelo kakovostni in masivni stroji. Popolnoma kompletni, pripravljeni za obratovanje. Gjdeu A Hv Njpfx Agyjbi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Flexographic Printing Machine FlexiCOLOR 1700/1400 (2 colors), Cooper system – year 2013 – Excellent condition, preserved Price: 6,000 EUR Location: Ostrava, Czech Republic Year of manufacture: 2013 Condition: Used (briefly in operation), long-term preserved – wrapped in anti-corrosion foil and stored in a crate Description For sale: Flexographic printing machine FlexiCOLOR 1700/1400 (2 colors), designed for printing on sheet materials, particularly plywood and cardboard. The machine was used only for a short period, then decommissioned, preserved, wrapped in anti-corrosion foil, and stored in a shipping crate – ideal for secure transport and storage. The machine is equipped with the Cooper system (quick cliché change and precise registration) and stepless speed control via frequency inverter. Operates with water-based inks (ink tray + two-roller system, easy draining and cleaning). Main advantages - Briefly used, then unused and preserved (anti-corrosion foil + crate) - 2 colors, suitable for standard marking/printing on plywood and board materials - Cooper system – quick cliché change, stable print registration - Frequency inverter – stepless speed adjustment - Water-based inks – easy operation and maintenance Possible to print on irregular shapes (independent feeder adjustment / guide chains) Technical data Model: FlexiCOLOR 1700/1400 Number of colors: 2 Max. print material width: 1700 mm Gbjdpfsyghzhsx Agyji Print cylinder width: 1400 mm Cylinder circumference: 905 mm Max. speed: up to 1,800 pcs/h Motor power: 0.75 kW Dimensions (L × W × H): 3700 × 1850 × 1100 mm Weight: 540 kg Use: printing on thick sheets, up to approx. 30 mm Delivery / Inspection The machine is available in Ostrava. Delivery includes protective packaging (anti-corrosion foil) and crate.

Stanje: zelo dobro (rabljeno), Profesionalni diskasti rezkar Ø100 mm x 6 mm z izmenljivimi rezilnimi ploščicami, nameščen na držalu SK40 – Izdelano v Nemčiji. Idealno za hitro in natančno utorno rezkanje, rezanje ter bočno obdelavo jekla, litega železa, aluminija in drugih konstrukcijskih materialov. Rezkar je opremljen z večrezilnimi ploščicami – zagotavlja visoko učinkovitost rezkanja in dolgo življenjsko dobo orodja. Celota v dobrem delovnem stanju, pripravljena za takojšnje delo v CNC centru. • Premer rezkarja: Ø100 mm • Širina reza: 6 mm • Izmenljive rezalne ploščice • Priprava: konus SK40 • Stanje: rabljeno – 100% delujoče • Proizvodnja: Izdelano v Nemčiji Gedpfoxllclsx Agyobi

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (double-sided): 200 mm - Max planing height (four-sided): 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - 1 metal feed roller - Toothed infeed roller - Pawls - Pressure element - 2 toothed feed shafts - Pressure element - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure element - Smooth metal feed roller - Pressure element - Profiling spindle, 7.5 kW - Pressure element - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, shaft length 130 mm, 2.2 kW - 2 guide rails - Infeed table - Smooth feed shaft - 610 mm, 4-knife planing shaft (currently 2 knives installed), 7.5 kW - 2 smooth feed shafts - Split metal sliding roller - Side pressure element Rear section: - Side spindles + 2 pressure elements 1) Right vertical spindle 95 mm, 4 kW 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down and left/right - Adjustable rollers in lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction connection diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight: approx. 3500 kg ADVANTAGES: Gbedex S Ngkepfx Agyoi - The best wide planer for both wet and dry wood - Perfect for processing beams, floorboards, etc. - Additional profiling shaft and pre-cutter - 4 horizontal planing shafts + 2 vertical spindles - Manufactured by the German brand KUPFERMUHLE - Used planer, condition: very good Net price: 66,900 PLN Net price: 15,930 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant currency fluctuations)

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Popolna odsesovalna naprava za proizvodno linijo za razrez hlodovine LSH 350/4500. V obratovanju od 01/2023. Naprava nima proizvajalca, sestavljena je iz posameznih komponent. Nameščena na podlagi izračuna, dokumentacija na voljo. Gbsdpfxexa Exco Agysi

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Naprodaj 20 kosov 1 kos za 500,- EUR Možnost prodaje po kosu Gsdpfx Asxb Acujgyjbi Prvi premer 76 mm Drugi premer 98 mm Premer montažnih vijakov 166 mm, 6 vijakov M14

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, nosilnost: 350 kg, skupna višina: 820 mm, skupna širina: 1.185 mm, skupna dolžina: 2.345 mm, skupna masa: 68 kg, Pozdravljeni Gedpfxjvx Dx As Agyebi Prodajam palete za osebne pnevmatike - Zelo dobro stanje - Dimenzije: 2345x1185x820 mm - Teža: 68 kg - Nosilnost: 350 kg - Na voljo: 850 kosov - Cena: 119 EUR/neto/kos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, obratovalne ure: 10.643 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 815 mm, pomik po osi Z: 815 mm, največja hitrost vrtenja: 3.600 obr/min, model krmilnika: Heidenhain iTNC 530, Retrofit stroja je bil izveden leta 2010! TEHNIČNI PODATKI Gbjdpfx Aeyrdxtogyei Pomik X-os: 1.500 mm Pomik Y-os: 815 mm Pomik Z-os: 815 mm Vpenjalna miza: 3.250 x 815 mm Nosilnost mize: 5.000 kg Hod pinole: 150 mm Vreteno: SK 50 Območje vrtljajev: 40–3.600 min⁻¹ PODROBNOSTI STROJA Krmiljenje: Heidenhain iTNC 530 Rezkalne glave: uporaba 1/2/3/4-glavne postavitve Skupna potrebna moč: 44 kW Mere & teža Potrebni prostor: ca. 8 x 4 x 4,5 m Transportne mere osnovnega stroja: ca. 6 x 3 x 3,5 m Električna omara: ca. 2,6 x 0,6 x 2,6 m Teža stroja: ca. 20 t Delovne ure Vklopne ure krmiljenja: 20.987 h Vklopne ure stroja: 19.703 h Čas programskega teka: 10.643 h OPREMA Hidravlika Razni pločevinasti deli

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 5.189 h, Vehicle Description Wheel Loader TEREX TL 80 Year: 2016 According to hour meter: 5,189 hours 45 kW 2-speed hydrostatic transmission Approx. 5,000 kg incl. forks hydraulic quick coupler auxiliary hydraulic circuit up to the fork carrier cab with heating lighting system with indicators incl. Dutch road registration ready for immediate use! very good original condition! Gbodpfx Ajrrdgwsgyoi Sales price: €29,500 net Affordable delivery available!

Stanje: rabljeno, obratovalne ure: 54.000 h, številka stroja/vozila: LC597, Technical specifications and performance data This used bottling line is designed for reliable beverage production and downstream industrial packaging, achieving up to 8,000 bottles per hour (bph). The configuration integrates an MBF filling monoblock (2002), consisting of rinser, filler, and capper, specifically engineered for straight flush cork closure technology. The line also includes a ROBINO & GALANDRINO POKER Z 6/8 (2002) capsule and shrink machine, followed by APE Impianti carton handling and KOSME labeling technology. This equipment offers robust performance for used plant settings and flexible format management, as typically required for glass and PET bottles. Production speed: 8,000 bottles per hour Gbedpfx Agsyh E Huoyei Filling monoblock: MBF (year 2002) – rinser, filler, capper Closure type: straight flush cork Capsuling/shrinking: ROBINO & GALANDRINO POKER Z 6/8 (year 2002) Compatible formats: Typical carton pattern includes 12 x 0.75 L; additional formats manageable with changeover kits Containers: Suitable for bottle handling; configuration supports glass (cylindrical containers) Labeling modules: KOSME STAR 720 12T (cold glue) and KOSME EXTRA ADHESIVE 12T S3 E3 (self-adhesive) Labeling capabilities: Front, back, and neckband (collarino) application Packaging modules: APE FORMA 2000 (carton erector), APE INCA 2010 (carton packer), APE INSER 2001 (partition inserter) Electrical (MBF monoblock): 380 V, 50 Hz; installed power 17 kW Electrical (labelers): 400 V, 50 Hz; installed power 4 kW (STAR) or 8 kW (EXTRA ADHESIVE) Pneumatics (MBF): 0.6 MPa (6 bar); air consumption 200 Nl/min Weights: 9,000 kg (MBF monoblock), 2,650 kg (STAR 720 12T), 2,000 kg (EXTRA ADHESIVE 12T S3 E3) Compliance: CE-marked components Advanced automation and control systems The line uses modular automation across filling, labeling, and carton stations to ensure stable throughput. The MBF monoblock and Robino & Galandrino POKER Z operate in synchronized mode, ensuring precise fill heights, hermetic straight cork sealing, and professional capsule handling. The KOSME labelers are configured for complex equipment requirements and allow synchronized application of front, back, and neckband labels. Operator-friendly controls on each module support fast commissioning and format changeovers. APE Impianti packaging modules offer synchronized motions and interlocked safety guards for downstream processes. Integration capability in production lines This bottling line is engineered to work inline with conveyors and buffer zones to achieve the 8,000 bph target. The MBF filling core

Stanje: dober (rabljeno), Leto izdelave: 2014, Vehicle Description Mobile Excavator TAKEUCHI TB295W Year: 2014 According to meter: 9,709 operating hours 10,700 kg 77 kW - Powertilt - Hydraulic quick coupler - All hydraulic lines - Ditch cleaning bucket - 2 trench buckets - Blade - Outriggers - Central lubrication - Air conditioning - Reversing camera and much more... Very nice and good original condition with original paint! Gedpev D Dqvjfx Agyobi Asking price: €49,950 net Affordable delivery available!

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: SO133, Technical Data & Performance Specifications The SIPA SFR EVO3 is a rotary stretch blow molding machine designed for highly efficient production of PET bottles in modern beverage facilities. As a robust used piece of equipment for industrial packaging, it delivers reliable performance for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and accommodates a broad range of bottle sizes commonly used in the water and soft drink sector. Manufacturer: SIPA Model: SFR EVO3 Year of manufacture: 2017 Production speed: up to 18,000 bottles per hour Number of cavities: 8 Thread/Neck finish: PCO 28-1810 Bottle formats: Compatible with 0.5L, 1.0L, 1.5L formats Container type: Designed for handling PET bottles Bottle diameter (min–max, diagonal): 50–125 mm Bottle height (min–max, without neck): 80–349 mm Advanced Automation & Control Systems Engineered for consistent performance, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing cycles. Operator-friendly HMI and PLC-based controls support recipe management, process monitoring, and rapid format changes. The machine architecture emphasizes repeatability of pre-blow and blow phases, ensuring stable bottle quality even at high production speeds. Automated process control with user-oriented HMI Efficient preform heating for uniform material distribution Quick-change features to support fast format changeovers Safety-interlocked protective covers and emergency stop switches for operator protection Integration Capability into Production Lines This blow molder can be seamlessly integrated into used PET filling lines, either as a stand-alone unit ahead of a filler or synchronized within a complete beverage production line. The supplied preform feeder and preform cooling systems facilitate smooth handling and stable production conditions, thus enhancing the overall efficiency of the line. Inline or stand-alone operation with standard conveyor interfaces Compatible with downstream filling, capping, and labeling machinery Flexible handling of 0.5L, 1.0L, and 1.5L formats Suitable for upgrades or capacity expansions of used packaging machines Machine Condition & Maintenance History The machine is currently in operation, demonstrating its readiness for deployment in an active production environment. Built in 2017, it offers a modern platform for operators seeking reliable performance and repeatable quality in PET bottle production. Its status as a fully functional used machine makes it a strong candidate for rapid integration into industrial packaging lines. Operating Performance & Versatility With 8 cavities and up to 18,000 bph, the SFR EVO3 combines speed and quality for demanding beverage... Gedpfx Ageyhbihjysbi