Sušilec Zraka Za Kompresor nakup rabljenega (111.311)

Leto izdelave: 1980, Stanje: rabljeno, Compressed Air Dryer, Refrigeration Dryer - Max. pressure: 16 bar - Operating voltage: 380 V Godpfx Asckgiveb Tjkf - Dimensions: 1050/950/H1770 mm - Weight: 556 kg

Stanje: rabljeno, Piston Compressor KAESER Type EPC 630-250 Serial No. 1802334 Year of manufacture: 1992 Volume flow at 6 bar: 440 l/min Intake capacity max.: 630 l/min Max. pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Power supply: 400 Volt, 50 Hz (with 16 A plug) - 2-cylinder, oil-lubricated Gsdewypqrepfx Ab Tskf - Pressure switch set to 10 bar - Run time from 0 bar to cut-off pressure of 10 bar: 5 min Dimensions (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg Good condition

Stanje: dober (rabljeno), Leto izdelave: 2010, The unit has been well maintained. Comp. Air Pmax: 13 bar Refrigerant Pmax High: 18.7 bar Electrical connection values: 230 V / 50 Hz, 1 kW, single phase Width: 460 mm Depth: 500 mm Height: 830 mm Gksdpfx Asvmqkhsb Tef Weight: 60 kg

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 290 kg, skupna dolžina: 1.430 mm, skupna širina: 660 mm, skupna višina: 1.250 mm, vrsta goriva: električni, volumenski pretok: 15 m³/h, raven hrupa: 54 dB, vrsta zaščite (IP koda): IP55, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) – 2022 Model: SRKT 2 The compressor delivers completely oil-free air, dried to a pressure dew point of +3°C. Total operating hours: 5h Overpressure: 0.8 MPa Gksdpfoxyhdbsx Ab Tsf Capacity: 14.4 m³/h Overall dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 liters Ambient temperature: from +5 to +40 °C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A – 0.35 kg Sound level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Stanje: rabljeno, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration dryer with water-cooled aftercooler for the removal of water vapor and cooling of compressed air or gases. 1 pc. Aftercooler type WFN009 DHH16 Air flow rate (standard): 540 m³/h = 9,000 liters/min Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Gjdpfx Asdzqn Ueb Tekf Weight of aftercooler: 11 kg Dimensions (L x W x H): 1030 x 850 x 200 mm + 1 pc. Water Separator type CSP 008 Air flow rate (standard): 480 m³/h = 8,000 liters/min Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminium + 1 pc. Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Capacity: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures Height (as mounted): 2000 mm Total weight approx. 40 kg 2 identical units available

Stanje: pripravljen za uporabo (rabljen), Hladilnik / Kompresor za hlajenje, York YCSE-B080SB50, Rabljeni stroj Proizvajalec: York Gkedpfx Aox Hguhsb Tef Model: YCSE-B080SB50 Teža: 950 kg Hladilno sredstvo: R407C Dimenzije: 1110 × 870 × 1620 mm Leto: 2012 Moč: 232 kW Stopnja zaščite: IP2X Električni podatki: 68 kW, 118 A

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2001, Oprema: kompresor, Kompresor je deloval do zadnjega trenutka, vendar je izven uporabe že najmanj 10 let. Pred ponovno uporabo je potrebna temeljita servisna kontrola. Gkodpfox A Un Eex Ab Tjf

Leto izdelave: 2021, Stanje: dober (rabljeno), Moč motorja: 7,5 kW Dimenzije stroja pribl. (D x Š x V): 1.935 x 6 mm Teža pribl.: 447 kg Gjdpexzuxbjfx Ab Tekf Tlačna posoda: 500 L Maksimalni tlak: 13 bar - s hladilnim sušilcem, nameščenim na posodi - grafični nadzor - Air Engery Control 3+

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean-air extraction unit with H3 certification Suction inlet: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 1,140 m³/h Rated airflow: 814 m³/h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg Gkodshkztwopfx Ab Tjf - immediately available -

Stanje: rabljeno, VAKUUMSKA SUŠILNICA za masiven les Rabljeni stroj Gkjdexxladspfx Ab Tsf Prostornina: 10 m³ Premer: 150 cm 12 aluminijastih plošč z nakladalnim vozičkom Dimenzije: Dolžina: 630 cm Širina: 185 cm Teža: 3000 kg

Leto izdelave: 1999, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering here a screw conveyor with a 160kW motor. Both the screw and the motor have been completely overhauled by the manufacturer and have not been used since. The offer includes: Gkedpeic Rftjfx Ab Tsf - RO230 screw conveyor by GDW - Siemens 1LA6 316-4AA68-Z 315L 160kW motor

Stanje: zelo dobro (rabljeno), From federal stocks, we can offer you these top-maintained MAC 100 S breathing air compressors by the global brand Dräger – directly from the first owner! The MAC 100 S is capable of delivering ultra-pure breathing air in accordance with EN 737-3 for hospitals and other medical facilities, with a continuously adjustable output range from 0 to 6 bar. The unit operates extremely quietly and is suitable for continuous operation throughout the day. Both maintenance flaps allow easy access to all components, and all filters can be changed within minutes. Technical data: WxHxD: 630 x 884 x 690 mm Weight: 115 kg Gkjdpfx Ajitcx Teb Tjf Power supply: 230 V / 50 Hz Current consumption: 6.0 Amps Sound pressure level: max. 50 dB(A) The devices have been consistently stored in special wooden crates and were only operated during annual inspections and maintenance—run times for each unit are between just 30 and 100 hours. Included in the scope of delivery are the device itself, the transport crate, and an operating manual. All units are in excellent optical and technical condition, with no damage—minor scratches or discolorations may occur but are solely due to maintenance work and in no way affect the functionality of the equipment. The total system weight including accessories and box is approx. 210 kg. Sale is exclusively to commercial customers; of course, you will receive an invoice with VAT shown. Private buyers have the option to purchase the equipment "on behalf of a customer"; a direct commercial sale to private individuals is expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to compensation claims arising from grossly negligent or intentional breaches of the seller's obligations, as well as in the event of injury to life, body, or health. For inquiries regarding prices or technical details, please do not hesitate to contact us at the address provided.

Stanje: rabljeno, Filter system, extraction unit, clean air extraction unit SCHUKO Type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging system Fan Type S 140 / 0 / S1 Serial No. Year of manufacture 12 / 2004 Nominal air flow: 1451 m³/h Negative pressure: 1398 Pa Filter area: 18 m² Extraction connection: Ø 140 mm, reduced to Ø 120 mm Air outlet: 480 x 480 mm Motor power: 1.1 kW Power supply: 400 volts, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - Mechanical filter cleaning via shaking motor - 2 discharge pipes at the bottom for waste collection bags, each Ø 500mm reduced to Ø 300mm - Dry fire extinguishing line with connection for C-hose, fire brigade connection for filter fire - Differential pressure switch for detecting filter contamination - Without control system (no control unit included) - Mounted on 4 steel tube legs (square tube 40x40 mm) Height as shown in photos: 3050 mm Required space (L x W): 1850 x 1000 mm Weight: approx. 400 kg Gkedjr R Ewlspfx Ab Tef Very good condition Ideal for wood dust, wood chips, plastic dust, or plastic chips.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22924, Izpušni in razpraševalni sistem Dimenzije izsesavanja: Dolžina: 1100 mm Širina: 1100 mm Višina: 1950 mm Dimenzije ohišja filtra: Premer: 900 mm Višina: 1400 mm Gkedpfx Ajv Scfujb Tof Dimenzije krmilne omare: Širina: 400 mm Višina: 600 mm Globina: 300 mm Izpušni in razpraševalni sistem je že demontiran in je pripravljen za prevzem.

Stanje: novo, Leto izdelave: 2025, Ex-display unit – available at a special price Available at a special price Technical Data 300-P Inlet diameter: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 6,000 m³/h Nominal air flow rate: 5,089 m³/h Godpfxjcdy I Ts Ab Tjkf Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Special feature: Unit is equipped with a silencer – therefore extremely quiet – can be sold with or without the silencer Location: Available ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Suction inlet: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 6,000 m³/h Gedpfx Abeh D If Hj Tokf Rated airflow: 5,089 m³/h Negative pressure: 2,587 Pa Filter surface area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting output: 30 - 50 kg/h Briquette diameter: 50 mm Weight: 1,570 kg This machine is brand new in our stock – IMMEDIATELY AVAILABLE – Subject to prior sale Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, A thoroughly reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium extraction volumes, or an ideal complement to existing stationary systems. Gjdpfx Ajhkzt Njb Tekf Your advantages: • IE3 motor as standard • Approx. 73 m² filter surface area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional: type-tested rotary valve (FSA) • Tested return flow damper • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3 Ph • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h • Negative pressure at rated flow: 2,543 Pa • Inlet diameter: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection container volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: Available from stock, 54634 Bitburg - Immediately available – in stock Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 163 with standard chassis Dimensions and Weights Chip collection volume: 175 l Nominal diameter (outside) of extraction inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Maximum sound pressure level: 83 dB(A) Airflow Nominal air flow rate: 2200 m³/h Suitable for milling, planing, and sawdust (not for fine dust) Significantly reduced dust content due to BIA-certified filter material with high separation efficiency Housing parts and impellers made from high-strength special plastic Quick-release fasteners for filters and chip bags for easy maintenance Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Extraction units comply with Dust Class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Gkjdpfx Abohk S S Eo Tjf without extraction hose

Stanje: novo, Leto izdelave: 2025, Al-Ko Clean Air Dust Extractor Year 2024 Exhibition piece – Immediately available Absolute special price Technical Data Power Unit 250 P Inlet nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum pressure: 2,451 Pa Filter surface area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2,305 x 994 x 2,351 Gedpfx Abocdy I Rs Tskf Weight: 758 kg Location: in stock, 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Gedpfx Ajcnw T Iob Tjkf Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 141 With standard mobile chassis Dimensions and Weights Chip collection volume: 175 l Nominal diameter outside extraction inlet: 140 mm Length approx.: 1062 mm Width/depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Gkjdpehk S Swjfx Ab Tof Electrical Data Connection voltage: 230 V Mains frequency: 50 Hz Filter Filter area: 1.9 m² Noise Emission Maximum sound pressure level: 78 dB(A) Airflow Nominal air flow rate: 1650 m³/h For chips from milling, planing, and sawing processes (not for dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing parts and impellers made from high-strength specialty plastic Quick-release fasteners for filter and chip collection bags for simple maintenance Robust, high-quality construction Easy to maneuver thanks to swivel castors Low power consumption Extraction unit complies with dust class L Scope of delivery: Unit body with assembled fan module Filter bag / extraction unit Chip collection bag / extraction unit without extraction hose

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Capacity: 2 x 165 l Connection diameter (extraction inlet) outside: 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Network Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rate Godpfjhkzttjx Ab Tekf Nominal Airflow: 1448 m³/h Dust class: H3 Scope of delivery: - Metal fan wheel - Inspection opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed and two swivel castors with brake - Manual filter cleaning Item no. 5131620 Location: In stock, 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 250 P-BP Inlet Diameter: 250 mm Motor Rated Power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Maximum Airflow: 4,900 m³/h Nominal Airflow: 3,534 m³/h Gksdpfx Ascdr E Aob Tof Vacuum: 2,451 Pa Filter Area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting Capacity: 30 – 50 kg/h Location: Arriving at warehouse 54634 Bitburg Subject to prior sale

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Technical Data POWER UNIT 160 P: • Suction inlet diameter: 160 mm • Rated motor power: 2.2 kW; 400 V/50 Hz • Max. air flow: 2000 m³/h • Nominal air flow: 1448 m³/h • Vacuum: 2503 Pa • Filter area: 9 m² • Filter cleaning: Compressed air cleaning • Collection container (roll container): 241 liters • Dimensions (L x W x H): 1684 x 830 x 2050 mm • Weight: 288 kg • Design / operating side optionally right / left Gjdpfxebpg Itj Ab Tokf Location: Available immediately from stock, 54634 Bitburg Top price for the display unit

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Gsdscnw U Djpfx Ab Tekf Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg