Sušilnik zraka za vijačni kompresor

Atlas Copco FX9 (A7.5)

Stanje: rabljeno, Technical Details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table speed: 0.05–4.5 m/min, stepless Spindle speed: grinding spindle 1780, 2050 rpm Spindle speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2200x280 mm Table swivel range: 9° forwards / 10° backwards Godeu Ng Dgjpfx Ahmobn Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDER without internal grinding attachment - For precision grinding of external (and internal) as well as tapered surfaces. - Infeed of grinding spindle headstock by hand or hydraulically - Table feed hydraulically infinitely variable - Grinding spindle swivels by 60° - Workpiece headstock swivels by 90°, with MK 4 mounting - Tailstock, MK 3 mounting Equipment: - Wheel dressing device - Coolant tank including pump and supply as per description.

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Axial table travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: Gbedst Hww Dopfx Ahmjn - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 400 mm, merilno območje os Z: 200 mm, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, osvetlitev, Year of manufacture: 2012 Tactile probe: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C: 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C: 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C: 1.9 + L/250 Godouq Nfhepfx Ahmobn Scanning probing deviation MPE according to ISO 10360-4:2000 THP: 2.7 [μm] Single stylus probing deviation, form MPE according to ISO 10360-5:2010 PFTU: 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C: 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C: 1.7 + L/250 Probing deviation MPE according to ISO 10360-7:2011 PF2D 5): 1.7 [μm] Probing deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5): 1.2 [μm] Available services: Delivery, commissioning

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, For sale: (For further extensive technical data, see PDF) Technical Details of the Machine: - Long-tube filling system with 40 filling valves and 8 counterpressure pistons - Pre-evacuation system to reduce oxygen intake - Hygienic bottle table and stainless steel components for durability - Mechanical adjustment range: 3,000 to 15,000 bottles/hour - Capacity range: 0.33l LN 3,000–13,500 bottles/hr, 0.5l NRW 3,000–12,000 bottles/hr - Low oxygen pickup: max. 0.02 mg O2/l - Conversion parts included for various bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW) Advantages of the Machine: This machine offers numerous benefits that enhance the quality of the filling process. - Smooth, product-friendly filling under CO2 atmosphere - 50–60% lower CO2 consumption compared to short-tube fillers - High durability due to reinforced drive elements - Hygienic design makes cleaning easier - Short changeover times - Convertible to cans according to the manufacturer (conversion kit not included) Gsdswqz Nnopfx Ahmsbn Low operating hours: 3 days/week at 7 hours each; rarely used for 4 days/week Annual maintenance by the manufacturer The machine is immediately available and was only decommissioned about 5 months ago. Original purchase price was approx. €330,000

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Gbodpfxou Rptyo Ahmjn Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Maksimalni premer žaginega lista: 400 mm Digitalni prikaz kota v stopinjah (+/- 46°) 2 x pnevmatska objemka Hidravlični podajalec lista Moč motorja: 1,8 kW Digitalni zaslon na dotik Ročni čitalnik črtne kode 6000 mm dovod z digitalnim pomikom Gbedpjxx Hwwjfx Ahmen 4000 mm ročni odvod z valji

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Schiavo Hydro 3000.6 Vertical glass washing machine with pre-wash zone, main washing zone, and drying zone. Wet zone is largely made of stainless steel and moisture-resistant materials. 150 mm one-piece washing brushes with stainless steel core. Including water tanks for water treatment. Including fan for glass drying. Outfeed zone with inspection lamps. Processing dimensions: Max. glass height: 3,000 mm Glass thickness: 3–22 mm Brushes: 6 units Connected load: 22 kW Gedswd N Urjpfx Ahmjbn

Leto izdelave: 1991, stanje: dober (rabljeno), številka stroja/vozila: 44070/91-180102,

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 18.950 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Premer žice: 0,1–0,3 mm Samodejno ponovno vdevanje Vodna kopel Obratovalne ure: 18.950 h Gjdpfxowzyvho Ahmebn Hodi osi: X 350 mm, Y 220 mm, Z 220 mm, U 350 mm, V 220 mm Krmiljenje Millenium Leto izdelave: 2005

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m Gbsdpfxot Hw H Es Ahmen S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!