Stroj Za Obdelovanje Zemlje nakup rabljenega (86.485)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors Gbedet Dx U Sepfx Anfel BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Gedpfeuxqzujx Anfebl Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. Gbsdpfxett Da Dj Anfjl • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Gedov Hm Nmjpfx Anfobl Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Gbjdpog Nn E Nsfx Anfel Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Zelo dobro ohranjen stroj malo delovnih ur, Kontak možen tudi preko WatsApp, Govorimo Angleško Nemško in ex YU jezike. Strj se nahaja v Nemčiji. Vsa specifikacija mašine je v prilogi pdf Gbedpfxor Idkwo Anfel

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Odlično ohranjen stroj, giljotina za zmrznjene bloke trifazni priklop, malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Gsdjy R Eq Nspfx Anfjbl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Odlično ohranjen stroj, trifazni priklop malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Godpfxey R Ep Es Anfebl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Gbjdpfexwuryox Anfel Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Cleaning agent spraying unit Glue joint scraper FA20 BASIC Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Stanje: novo, Polirne krtače iz perlona 45/25x4 Gbjdpfx Ajy R R H Njnfjl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Gbodjy Iwlaspfx Anfel

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Curioni Sunmaster 350, leto 2021, v zelo dobrem delujočem stanju, v redni proizvodnji. Gedjy Rr R Aspfx Anfjbl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, Oprema: dokumentacija / priročnik, Univerzalni stroj COMEC RCG 900 za obnovo glav, blokov, bobnov in diskov osebnih in gospodarskih vozil. Širina obdelave: 320 mm Dolžina obdelave: 900 mm Največja delovna višina: 370 mm Gbodpey Rffyofx Anfel Največji hod mize: 1200 mm Pomik: 0,8 - 450 mm/min Največji premer zavornih bobnov: 1400 mm Glavni motor: 5,5 Hp Obrati za obdelavo zavor: 35-70-50-100 vrt/min Približna teža z dodatki: 1700 kg Dimenzije: 2300 x 790 x 1700 mm (V)

Stanje: novo, Zustanje novo Dobavni rok cca. 14 - 16 tednov od naročila Država izvora Turčija Cena 81.500 € Leasing obrok 1.540,35 € Maks. debelina pločevine – konstrukcijsko jeklo 8 mm Maks. debelina pločevine – nerjaveče jeklo 5 mm Maks. robni polmer 80 mm Min. robni polmer 10 mm Maks. premer diska 4.500 mm Gbedpfoyq Svkox Anfsl Min. premer diska 720 mm Maks. višina roba 95 (R 80) / 35 (R 25) mm Motor 11 kW Dolžina 4.900 mm Širina 1.700 mm Višina 2.700 mm Teža 4.550 kg Vključuje robne valje za konstrukcijsko jeklo (R25) Vključuje rezila Ena hitrost (70 min⁻¹) z možnostjo nastavitve največjega navora Pogonski zgornji in spodnji valj z neodvisnimi hidravličnimi motorji ter planetnim reduktorjem Možno obdelovati ravna in konveksna dno Hidravlično nastavljiva višina dna Postopek rezanja in robljenja na istem glavi Stranske podporne valje Upravljanje prek zaslona na dotik Možnosti kot so fiksni in nastavljivi nosilci stožcev, adapterji za manjše premere, rezila za nerjaveče jeklo ali večje hitrosti … po povpraševanju.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za mletje in mešanje Kolbe MW100 + porcioner KOLBE PM150 Gbjdey N D Drspfx Anfol

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kuter Mado Supra 70 . Gsdpfsy N D Dfsx Anfsbl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 020616/P, skupna širina: 70 mm, skupna dolžina: 90 mm, skupna višina: 180 mm, pritisk: 8 letvica, obratovalni tlak: 8 letvica, vhodna napetost: 230 V, Oprema: kabina, I am selling a METAL FINISHING water blasting machine - Type – waterblast 800 - Model – WBL 001 - Ser. No. – 020616/P - Year 2008 Gbsdey Rz Abspfx Anfsl The machine has been used very little and has been regularly maintained. It is very practical and very efficient. Its advantage is that with high pressure of water, which also contains abrasive granules, it hits the metal and creates a great effect. The advantage of a water blasting machine is that the water, together with the granules, constantly circulates, flows into the tank and this means that there is no dust, that abrasive particles do not enter the surroundings, that the surroundings are always clean. It is connected to the electrical network and ready to start.

Stanje: novo, Leto izdelave: 2026, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 755 mm, skupna višina: 2.280 mm, skupna dolžina: 1.445 mm, skupna širina: 19.975 mm, skupna masa: 2.600 kg, Tehnični podatki: Pomiki: X: 600mm Y: 500mm Gbsdpoy R Npvefx Anfel Z: 755mm W: 500mm W-tip: Servo-motor Dimenzije (Š x G x V) 1975 x 1445 x 2280 mm (maks. 2785 mm) Potrebni prostor (Š x G x V): 2100 x 1600 x 2900 mm Uporaben premer elektrode: ø 0,1 ~ ø 3,0mm (do ø 6,0mm opcijsko) Uporabna dolžina elektrode 800 mm Teža stroja: 2600 kg Največja teža obdelovanca: 1000 kg Moč: 3ø 380V 50~60Hz (nastavljivo) Največji dovoljen tok: 30A Nazivna zmogljivost: 5KVA Potreben pnevmatski tlak: 5 bar Ionski izmenjevalni sistem s senzorjem

Stanje: rabljeno, Stroj za upogibanje armature, Upogibalec armaturnega jekla, Peddinghaus Special 32, Rabljena naprava Proizvajalec: Peddinghaus Tip: Special 32 Skupne dimenzije: Širina: 660 mm Globina: 850 mm Višina: 830 mm Teža: 325 kg Električni podatki: 400 V; 7 A Gbodpfey R A Niox Anfjl Kapaciteta upogibanja: maks. Ø 32 mm (posamezna palica) Hitrost upogibanja: pribl. 10 obr/min Moč motorja: 2,2 kW Krmilni sistem: Samodejna nastavitev kota upogiba, zagon s stopalko

Stanje: dober (rabljeno), Škarje za rezanje pločevin iz jeklene žice Gsdogiplvopfx Anfjbl Rezalna dolžina: 3900 mm Dimenzije: Dolžina: 5100 mm Širina: 1700 mm Višina: 3100 mm

Stanje: rabljeno, Panning stroj, stroj za prevleko, za praline in dražeje, rabljena oprema Proizvajalec: Walter Brucks Tip: I Skupne dimenzije: 1200 x 1380 x 1800 mm Teža: 280 kg Električni podatki: 400 V, 3 A Velikost bobna: 1200 mm Ø x 650 mm Odprtina bobna: 740 mm Ø Gbsdjypvhzepfx Anfel Kapaciteta / mešanje: približno 150 kg

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: HAPA Model: 421 High-performance labelling machine for ampoules, suitable for containers with diameters ranging from 8 mm to 30 mm. Gbodpfjcq Tm Eox Anfol Capacity: up to 18,000 units/hour Label size (min): 15 x 28 mm Label size (max): 60 x 76 mm Year of manufacture: 2002

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 5801, Stroj za vrtanje in rezanje pločevine FDB 600, Stroj za obdelavo pločevine Peddinghaus FDB 600 iz serije Peddimat je primeren za avtomatizirano vrtanje in avtogeno rezanje ravnega jekla in jeklenih plošč v jekleni konstrukciji. CNC krmiljenje: SIEMENS SINUMERIC Premer vrtanja: min. Ø 8 mm, maks. Ø 40 mm, notranji hladilni sistem za vrtanje Število vrtalnih agregatov: 3 kosi Rezkalni sistem: Avtogena oprema za rezanje Godpsibq Itofx Anfobl Skupna priključna moč: 30 kW Največja višina obdelovanca: 600 x 50 x 6000 mm Minimalna velikost materiala: 80 x 8 mm Debelina pločevine – min.: 6 mm Debelina pločevine – maks.: 50 mm Dimenzije stroja pribl.: 2,4 x 2,4 x 2,8 m Dovodni valjčni transporter: 6 m Izhodni valjčni transporter: 1 m Teža stroja pribl.: 6,5 t

Stanje: pripravljen za uporabo (rabljen), Brusilnik orodij, brusilnik svedrov, Schanbacher S3-50 Proizvajalec: Schanbacher Tip: S3-50 Leto: 2012 Dimenzije: 460 × 600 × 1260 mm Gbedpjx Dbltsfx Anfel Premer svedra: 3–50 mm; Kot konice: 90°–140° Vključuje: zaščitni pokrov, sistem za odvajanje prahu

Stanje: rabljeno, Vibracijski podajalnik delov, vibracijski stroj za končno obdelavo, krožna vibracijska posoda, boben za obdelavo, rabljeni stroj Gbedpfx Aneyh En Eofel Proizvajalec: Rösler Oberflächentechnik Skupne mere: Širina: 1310 mm Globina: 1185 mm Višina: 1440 mm Teža: 690 kg Velikost korita: Ø 1090 mm, globina do višine izpusta: 240 mm Električni podatki: 400 V Uporaba: razigljevanje, brušenje, poliranje, čiščenje Vibracijski stroj Rösler R185 je idealen za razigljevanje, posnemanje robov, čiščenje in površinsko obdelavo kovinskih in drugih delov. Zanesljiv, industrijski nemški stroj, zasnovan za neprekinjeno delovanje.