Stisnjen Zrak Motornih nakup rabljenega (2.035)

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 Gsdpfxevz Hhxj Altobt The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar Gsdpsvz Hqgsfx Altjbt - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar Gedpfx Alsvz Hqtotjbt - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm Gedjvz Hq Tjpfx Altobt - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h Gbjdpfjvz Hqysx Altjt - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Gjdpfevz Hq Hox Altebt Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: rabljeno, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-Water, Air-Oil Heat Exchanger Serial No. WT08-1065P-2 Year of manufacture: 2008 Completely made of stainless steel (likely grade 1.4571) Gas-Air flow area: 900 x 230 mm Connection flange outside: 1000 x 310 mm Max. allowable pressure: 10 bar Max. allowable temperature: 300 °C Volume: 27 liters Test pressure: 17.9 bar Net weight: 325 kg Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pcs) - Tubes made of stainless steel with aluminum fins for improved heat transfer Available as accessories – for an additional charge: 3 units of heat exchangers with identical specifications and 27-liter capacity (each weighing 325 kg) 1 unit of heat exchanger with identical specifications and 17-liter capacity (weight: 200 kg) 2x 90° elbows with flange connection, stainless steel 2x adapters from rectangular flange to round tube Ø 210 mm, stainless steel Price is per heat exchanger. Gbsdpfxsy Dvguj Altst All four heat exchangers are shown together as a unit on pallet in the pictures. Total weight of all parts approx. 1,400 kg Package sale of all heat exchangers: EUR 4,000

Stanje: novo, Heating capacity: 30 kW Dimensions (L/W/H): 105 cm x 60 cm x 147 cm Gedpovxa Itofx Altsbt - NEW - Kanuk Turbo 2 *new design* Hot air furnace incl. heat exchanger and warm air blower Nominal heat output: 30 kW Dimensions: 105 cm x 60 cm x 147 cm Heatable room volume: 1,000 m³ Log length: 80 cm Efficiency: 82.4 % Flue pipe connection: 150 mm Ref. No.: 2100006

Stanje: novo, - NEW - Kanuk® Original Hot Air Stove Nominal heat output: 15.4 kW Dimensions: 80 x 58 x 95 cm Heatable room volume: 450 m³ Efficiency: 83.4 % Log length: 48 cm Flue pipe connection: 160 mm Total output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room heating capacity (m³): 450 Flue pipe connection (mm): 160 Flue pipe connection: top / rear Gsdpfxjvwf Rkj Altjbt Viewing window (cm): 28 x 15 Efficiency (%): 83.3 Weight (kg): 148 Flue gas temperature (°C): 216 Log length (cm): 48 Wood consumption (kg/h): 3.9 Flue gas mass flow (g/s): 14.28 Minimum chimney draft (Pa): 16 Flue gas throttle: No Combustion chamber H x W x D (cm): 40 x 44 x 49.5 Ash box: No Design type 1 (self-closing door): Optional Airwash system: Yes BimSchV Level 2: Yes Firewood, wood briquettes: Yes DIN EN number: 13240 Lignite briquettes: No AT §15a B-VG standard: Yes Primary, secondary, tertiary air: Yes CE marking: Yes External air connection (mm): 100 LRV Switzerland: Yes No. 2100102

Leto izdelave: 1994, stanje: rabljeno, Desiccant Air Dryer – Single Dryer KOCH CKT 300, 300 m³/h, Year of manufacture: 1994, Price: €4,900, Contact: Mr. Rainer Eckerle Gsdjb Hu S Tjpfx Altsbt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Dvojbobenska spiralna vroča zračna peč neposredno iz zaprte tovarne McDonald's, uporabljena za predkuhanje burgerjev in nuggetsov. Ti stroji so namenjeni visokokapacitetnemu pečenju, žaru in soparjenju najrazličnejših izdelkov; stopnja priprave je določena s temperaturo zraka, hitrostjo zraka, zračno vlažnostjo in časom, ki ga izdelek preživi v sistemu. Električno ogrevana. Trak 96 m x 600 mm. Uporabljena od leta 2007 do 2016, ko se je pogodba preselila v drugo tovarno. Stroj je v odličnem stanju, na voljo imamo tudi vse ostale stroje iz tovarne – oblikovalce, cvrtnike, stroje za paniranje, filtre, spiralne zamrzovalnike, pakirne linije itd. Prosimo, upoštevajte, da fotografije verjetno prikazujejo dve različni peči, obe sta si zelo podobni. Gbjdsx Altfjpfx Altet

Stanje: delavnici obnovljeno (rabljeno), Vijačne stopnje kompresorjev Atlas Copco, Kaeser - AIREND SIGMA - 1,2,3,4 SIGMA - 12 SIGMA - 175, 170, 18, 19, 26, 27, 28, 290, 292, 293, 33, 37 OIS-H03 OIS-H06 OIS-J01 OIS-K03 OIS-K13 OIS-K14 OIS-K15 OIS-K25 OIS-K26 OIS-K36 OIS-L03 OIS-L06 OIS-M01 OIS-M05 - C146 OIS-M08 OIS-N01 OIS-N02 OIS-O01 OIS-O05 OIS-Q01 Gbodpsxy Aaqsfx Altjt C146 C190 C111

Stanje: rabljeno, Extraction system, central extraction unit, ambient air filtration system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of manufacture: approx. 2005 Airflow volume: approx. 5000 m³/h Extraction inlet at filter: 1200 x 150 mm Gbjdpfxsicic He Altet Exhaust outlet at filter: 400 x 300 mm Motor power: 10 kW Power supply: 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance hatch for filter replacement - Radial fan mounted on top of the unit Required space (L x W x H): 2000 x 1650 x 3650 mm Transport height without fan: 3100 mm Weight: approx. 2000 kg Very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Zwillings-Trommelspiral-Heißluftofen direkt aus einer geschlossenen Fabrik, wurde zur Vor-Garung von Burgern und Nuggets eingesetzt. Diese Maschinen sind speziell für das Hochleistungsgaren, Grillen und Dämpfen einer Vielzahl von Produkten konzipiert. Der Gar-, Grill- oder Dämpfgrad wird durch die Lufttemperatur, die Luftgeschwindigkeit, die Luftfeuchtigkeit und die Verweilzeit des Produkts im System bestimmt. Elektrisch beheizt. 96 m x 600 mm Band. Im Einsatz von 2007 bis 2016, als der Vertrag in ein anderes Werk verlagert wurde. Die Maschine befindet sich in ausgezeichnetem Zustand. Wir verfügen außerdem über weitere Ausrüstung aus der Fabrik – Former, Fritteusen, Beschichtungsmaschinen, Filter, Spiralfroster, Verpackungslinien usw. Gedpfx Aljmrrwfotjbt Bitte beachten Sie, dass die Fotos vermutlich zwei verschiedene Öfen zeigen – beide sind jedoch baugleich bzw. sehr ähnlich.

Stanje: rabljeno, obratovalne ure: 638 h, Naprodaj visokotlačni kompresor za zrak / dušik – booster EFCO Maschinenbau GmbH BOE 100/200. Kompresor je rabljen, popolnoma delujoč. Trenutno je priključen – mogoč je ogled in preizkus na lokaciji. Namenjen je stiskanju zraka ali dušika do tlaka 200 bar. Primeren za tlačne preizkuse, industrijske procese, sisteme za testiranje ventilov ter druge visokotlačne aplikacije. Specifikacija: Model: EFCO BOE 100/200 Največji delovni tlak: 200 bar Kapaciteta: 2 x 50 l (100 l) Električni pogon – 400 VAC Primeren za stiskanje zraka in dušika Samodejni izklop ob doseženem maksimalnem tlaku Samodejni vklop ob padcu tlaka Enostavno in udobno upravljanje Čas polnjenja od 0 do 200 bar (2900 psi) ~2,5 h Delovne ure: 638 h Nemška oprema, profesionalna, industrijski razred. Za več informacij nas kontaktirajte – z veseljem odgovorimo. Gbodpey R Nnrsfx Altjt

Leto izdelave: 2026, stanje: novo, Ogrevanje jekla in/ali sušenje sena ter naprave in kabine za sušenje sena, montaža v kontejnerje plug and play (takoj pripravljeno za uporabo, tudi za najem), vgradnja v kontejner(je) ali na lokaciji v Švici in Avstriji ali južni Nemčiji. Moč od 80 kW do 500 kW in po dogovoru več kot 500 kW. Gbedpfskytn Hox Altot Toplozračni grelniki na zalogi – novi in rabljeni! Peletni grelnik 200 kW 19.000 m3/h – povprašajte za ugodne cene!! * Rabljeno!!! Na zalogi 1x 200 kW v kontejnerju s 3-tonskim zalogovnikom * Novo!!! Na zalogi 2x 200 kW s peletnim gorilcem Lanox.eu Nizozemska

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 82.618 h, Funkcionalnost: popolnoma funkcionalen, Rabljen hladilni sušilnik Kaeser TF230 Gbsdpfezwf Tzjx Altst 23 m3/min 16 bar Leto proizvodnje: 2018

Stanje: rabljeno, Parker Hiross sušač za komprimovani vazduh za kompresorske sisteme Mehanički separator kondenzata, separator vode Hladni sušač sa vodenohlađenim naknadnim hladnjakom za uklanjanje vodene pare i hlađenje komprimovanog vazduha ili gasova. Gjdpfx Aljdzqn Uotsbt 1 komad naknadni hladnjak tip WFN009 DHH16 Protok vazduha (normalno): 540 m3/h = 9000 litara/min. Radni pritisak vazduha: max. 16 bar Dužina kućišta: 1020 mm Prečnik kućišta: Ø 105 mm Navojni priključak za vazduh: G 2" Navojni priključak za vodu: G 3/4" Težina naknadnog hladnjaka: 11 kg Dimenzije naknadnog hladnjaka (D x Š x V): 1030 x 850 x 200 mm + 1 komad separator vode tip CSP 008 Protok (normalno): 480 m3/h = 8000 litara/min. Radni pritisak: max. 16 bar Navojni priključak: G 2" - Kućište filtera od aluminijuma + 1 komad mehanički separator kondenzata HIROSS SAC 120 Navojni priključci: R 1/2" Radni pritisak: 16 bar Zapremina: 0,8 litara - radi bez gubitka komprimovanog vazduha sve montirano kao što se vidi na slikama Visina montaže u stojećem položaju: 2000 mm Ukupna težina oko 40 kg

Stanje: rabljeno, Proizvajalec: STT Tip: Sušilnik 1500 Tovarniška/proizvodna številka: 930671 Vrsta naprave: Hladilni sušilnik / sušilnik stisnjenega zraka Napajalna napetost: 400 V Gbedpfxszx Tiyo Altet Faze / frekvenca: 3-fazna / 50 Hz Nadzorna napetost: 230 V Poraba moči: 5.505 W Poraba toka: 10 A Hladilno sredstvo: R134a Količina hladilnega sredstva: 830 g Izvedba: samostojna naprava

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 75.881 h, Funkcionalnost: popolnoma funkcionalen, Rabljen sušilnik z ohlajanjem Kaeser TF 280 28 m³/min 16 bar Letnik izdelave: 2015 Gbedozupuwspfx Altot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 78.886 h, Funkcionalnost: popolnoma funkcionalen, Rabljen sušilnik z ohlajanjem Kaeser TF 280 Gbsdezupr Nopfx Altot 28 m³/min 16 bar Letnik izdelave: 2015

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 81.265 h, Funkcionalnost: popolnoma funkcionalen, Rabljen hladilni sušilnik Kaeser TF 230. 23 m3/min 16 bar Gbodpfxjzupp Ue Altot Letnik izdelave 2018.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 96.663 h, Funkcionalnost: popolnoma funkcionalen, Rabljen hladilni sušilnik Kaeser TG 301 30,80 m3/min 16 bar Letnik izdelave 2007 Godpozupinjfx Altjbt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 83.875 h, Funkcionalnost: popolnoma funkcionalen, Rabljen hladilni sušilnik Kaeser TF 340 34 m3/min 16 bar Leto izdelave: 2015 Gedpfx Aljzupcuetsbt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Rabljen hladilni sušilnik Atlas Copco FX6 2,34 m3/min 14 bar Godpjzrtbijfx Altobt Letnik: 2019