Stiskalnica nakup rabljenega (2.605)

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €66,700 Leasing rate: €1,260.63 Pressing force: 150 t Stroke: 500 mm Table: 1,550 x 2,000 mm Mounting height: 800 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Length: 2,350 mm Width: 2,000 mm Height: 2,500 mm Weight: 4,100 kg Cylinder fixed or horizontally movable Clear gap between uprights: 1,550 mm Horizontally movable cylinder: 1,000 mm Hydraulically movable frame: 1,300 mm Horizontally movable cylinder Hydraulically movable frame Operation via hand lever and control panel Dedpjwirpisfx Aflekg Equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH OPTIONS: Worktable welded to base frame, with holes on the surface Control panel on swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Wireless remote control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8, or 10 units) Anti-rotation device for the ram 2 speeds for frame and cylinder movement Oil cooler and decompression valve

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 2.750 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 24.500 kg, Mobile car and mixed scrap press. Equipped with crane and cabin. Only 2,750 operating hours. Dkodpfx Afjuu Um Ejlsg

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Pressure: 16 t Stroke: 250 mm Throat depth: 270 mm Dodpfxeu Nfmyo Aflskg Installation height: approx. 400 mm Table area: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Pin hole in ram: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-speed hydraulic press Robust welded frame construction. Mode selection via selector switch: inching, two-hand, foot or continuous operation with feed Press is equipped with a side-mounted piece counter EMERGENCY STOP switch With stroke limiter Press force adjustment possible With overload protection (pressure relief valve) With shock-absorbing system Light curtain SICK optical electronics prepared (can be reactivated as an option)

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Italy Price: €117,000 Dkodpowirbrjfx Aflog Lease rate: €2,211.3 Pressing force: 125 tons Stroke: 500 mm Ram: 800 x 400 mm Table: 900 x 600 mm Installation height: 600 mm Throat depth: 300 mm Rapid traverse: 115 mm/s Reduced speed: 42 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Motor: 15 kW Length: 1400 mm Width: 1950 mm Height: 2600 mm 4 ram guides T-slots in table Rexroth hydraulic unit Monitored solenoid valves Air/oil heat exchanger Pressure switch Two-hand control panel Stroke adjustment via limit switch Siemens CPU Fixed side safety guards Equipped according to CE regulations (IV enclosure) OPTIONS (prices on request): Draw cushion Prism guide Light curtain Siemens CNC control with touchscreen Hydraulic pump with variable speed Proportional valves Side safety guards, movable with limit switch

Stanje: rabljeno, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Dodpfx Aju Nfuqsflekg Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Passage hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Further technical features: -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 7305 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €46,400 Leasing rate: €886.24 Dkedpfswiry Isx Aflog Quantity in stock: 1 Pressing force: 100 t Stroke: 500 mm Ram: 700 x 350 mm Table: 800 x 600 mm Installation height: 500 mm Throat: 300 mm Rapid traverse: 25 mm/s Working speed: 4 mm/s Motor: 4 kW Length: 1900 mm Width: 1200 mm Height: 2600 mm Weight: 2100 kg 2-point round guidance Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual including pressure switch OPTIONS: Delivery time with options approx. 2–3 months from order • 4-point round guidance € 1,900 • Light curtain € 7,300 • Siemens control for stroke and pressing time programming € 4,000 • Siemens touchscreen control, up to 50 programs storable, for programming: - Upstroke and downstroke percentages - Dwell time at lower stroke - Decompression time - Working pressure setting - Piece counter - Press stop in up and down movement - Manual and automatic operation setting - Alarm and fault management € 9,000 • Hour counter € 400 • Piece counter € 400 • Decompression valve € 700 • Oil cooler with decompression valve € 3,700 • Pressure switch included

Stanje: rabljeno, Technical Details: Force: 63 t Throat depth: 315 mm Ram adjustment: 60 mm Stroke adjustment: 70 mm Ram stroke: 10 - 105 mm Stroke rate: 71 - 140 strokes/min Strokes per minute (single stroke): 45 / 50 strokes/min Clearance between side frames: 355 mm Shut height: 335 mm Table (WxD): 800 x 630 mm Table opening: 400 x 130 mm Clamping plate (WxD): 616 x 85 mm Ram clamping surface (WxD): 450 x 280 mm Dkjdpfx Aevt Nvpsflsg Pin hole in ram: Ø 50 x 83 mm Total power requirement: 7.5 kW Machine weight approx.: 5.9 t Control cabinet dimensions (LxWxH): 0.86 x 0.30 x 1.3 m Machine dimensions approx. (LxWxH): Press: 1.42 x 1.8 x 2.6 m High-performance press with roller feed/strip system and straightener Application: Suitable for series production Equipped with servo roller feed MINI: manufacturer P/A GmbH confirmed, type SRF 220 - for strip width 220 mm - Feed rate 150 m/min - Operation via handheld unit Straightening system: - Manufacturer Wanzke, type KS 150 - Entry width max. 200 mm - 2 powered entry rollers - 4 powered straightening rollers (top), vertically adjustable approx. 30 mm - 5 powered straightening rollers (bottom), fixed, not adjustable Decoiler = custom fabrication: - mechanical/manual - Max. outer coil diameter: 1,500 mm - Max. inner coil diameter: 300 mm - Width max. 200 mm Roller table: - Roller system with 9 roller tracks with 53 rollers (Ø 25x25 mm)

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Turčija Cena: 91.200 € Lizing mesečna rata: 1.723,68 € Tlačna sila: 100 ton Hod: 500 mm Tlačna plošča: 600 x 900 mm Miza: 700 x 1.100 mm Vgradna višina: 750 mm Izvlečna razdalja: 320 mm Hitrost hitrega hoda: 100 mm/s Delovna hitrost: 8,5 mm/s Hitrost vračanja: 165 mm/s Motor: 11 kW Dolžina: 2.100 mm Širina: 1.900 mm Višina: 3.350 mm Teža: 7.300 kg Delovni tlak: 240 bar Sila vlečne blazine: 30 ton Hod vlečne blazine: 200 mm Luknja v mizi: Ø 120 mm Delovni tlak vlečne blazine: 170 bar Dkodpjwir Dgefx Afljg Hitrost vračanja vlečne blazine: 52 mm/s Površina vlečne blazine: 700 x 400 mm Dvoročno upravljanje Krmiljenje preko PLC Nastavljiv hod vlečne blazine Vodilne tirnice stiskalnice brez mazanja Svetlobne zavese

Stanje: rabljeno, Leto izdelave: 1990, Tehnični podatki: Pritisk: 100 t Dolžina upogibanja: 3100 mm Razmik med stojali: 2630 mm Krmiljenje za program: CNC-krmiljenje CYBELEC Maks. hod: pribl. 215 mm Izmet: 255 mm Vgradna višina: 410 mm Hitrost približevanja: 100 mm/sek Delovna hitrost: 6,5 mm/sek Zadnji omejevalnik: 500 mm motorni Velikost mize: 3100 x 60 mm Delovna višina: 890 mm Priključna napetost: 3x380 V / 50 Hz Skupna priključna moč: 5,5 kW Teža stroja pribl.: 7,9 t Dkedpfx Aou Icdaefljg Dimenzije stroja DxŠxV: pribl. 3,8 x 1,5 x 2,5 m Zadnji omejevalnik 500 mm, širina 2570 mm; 2 podprtni nosilci ročno pomični po celotni širini Upravljanje preko nadzorne plošče in/ali prostostoječega upravljalnega stojala za dvorokovno/nožno upravljanje Krmiljenje možno tudi s ročnim upravljalnikom Vključno z dodatno opremo i.D.

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po oddaji naročila Država izvora: Turčija Cena: 80.100 € Leasing obrok: 1.513,89 € Tlačna sila: 60 t Hod: 350 mm Bat: 550–850 mm Miza: 600–1.000 mm Vgradna višina: 600 mm Hitri pomik: 100 mm/s Delovna hitrost: 10 mm/s Povratna hitrost: 165 mm/s Motor: 11 kW Dolžina: 1.950 mm Širina: 1.900 mm Višina: 2.850 mm Teža: 5.350 kg Delovni tlak: 170 bar Tlačna sila vlečnega blazine: 24 t Hod vlečnega blazine: 150 mm Izvrtina mize: Ø 100 mm Delovni tlak vlečnega blazine: 156 bar Povratna hitrost vlečnega blazine: 65 mm/s Površina vlečnega blazine: 470–650 mm Svetlobna zavesa Vlečna blazina Ročno in samodejno delovanje Ročna nastavitev hoda preko ekscentričnega stikala 4-kratno samomazalno vodenje bata brez vzdrževanja Vpenjalna plošča z utori v obliki črke T Izvedba v skladu s predpisi CE Dkjdpfswiqz Rjx Aflog

Stanje: rabljeno, Leto izdelave: 1992, Tehnične podrobnosti: Obratovalna napetost: 400/50 V/Hz Priključek za stisnjen zrak: 7 bar Krmiljenje: - Največja stisna sila: 340–375 t Skupna priključna moč: 15 kW Približna teža stroja: 1,4 kg Dimenzije stroja: 1,4 x 0,8 x 1,6 m Stiskalnica za cevi in crimp stiskalnica ·Serijska proizvodnja hidravličnih cevi (delavnica, popravilo, proizvodna linija). ·Robustna izvedba, visoka stisna sila, primerna za velike premere cevi in visokotlačne armature. ·Čisto delo zaradi ležajev brez maziva/tehnologije – daljša življenjska doba, manj umazanije na obdelovancih. Delovno območje: vsi cevi do 6SP (SAE 100R 13-14) in prešane armature do DN 125 oziroma I.D. 5 Območje stiskanja od D=9 do D=180 mm Dsdpexv Awzsfx Afljkg Stiskalno orodje: dvoklinasti sistem (patenti doma in v tujini) Maksimalen stiskalni hod D=20mm Maksimalen nastavitveni hod D=10mm Število stiskalnih programov: 3

Stanje: novo, Stanje: novo Rok dobave: cca. 10 tednov po naročilu Država izvora: Turčija Cena: 74.100 € Leasing obrok: 1.400,49 € Tlačna sila: 100 t Hod: 300 mm Tlačnik: 600 x 900 mm Miza: 700 x 1.100 mm Vgradna višina: 550 mm Hitri pomik: 100 mm/s Delovna hitrost: 8,5 mm/s Dkedpfswiqy Tex Aflsg Hitrost povratka: 165 mm/s Motor: 11 kW Dolžina: 2.100 mm Širina: 2.050 mm Višina: 3.050 mm Teža: 6.500 kg 4-točkovno vodilo tlačnika Miza in tlačnik z utori v obliki črke T Ročna nastavitev hoda s pomočjo rotacijskega stikala Ročni in avtomatski način delovanja Svetlobne zavese Oprema v skladu s predpisi CE

Stanje: rabljeno, Technical details: Pressing force: 315 t Bending length: 5050 mm Distance between uprights: 4100 mm Throat depth: 500 mm Dsdpfxsu Iccpj Aflskg Stroke: 250 mm (ram) Control: DNC 884s Machine weight approx.: 27.0 t Machine dimensions LxWxH: 5.7 x 2.2 x 4.0 m The machine is installed approx. 0.95 m below floor level. Application: coining (bottoming) and air bending Operation modes via the DNC control system: manual, semi-automatic and automatic Maximum distance between table and upper beam: 490 mm Table: with extension approx. 800 mm, tool holder at the table = 30 mm dovetail Accessories: Numerous dies and punches, as shown in the photo in stock.

Stanje: novo, Stanje novo Dobavni rok pribl. 10 tednov po naročilu Država izvora Turčija Cena 71.300 € Leasing rata 1.347,57 € Prešna sila 30 t Hod 300 mm Bat 500–800 mm Miza 600–900 mm Dsdpowirl Djfx Aflskg Vgradna višina 550 mm Hitri pomik 100 mm/s Delovna hitrost 18 mm/s Hitrost povratka 165 mm/s Motor 11 kW Dolžina 1950 mm Širina 1900 mm Višina 2800 mm Teža 4.850 kg Delovni tlak 160 bar Prešna sila vlečnega blazine 12 t Hod vlečnega blazine 150 mm Izvrtina mize Ø 80 mm Delovni tlak vlečnega blazine 130 bar Hitrost vračanja vlečnega blazine 100 mm/s Površina vlečnega blazine 500x600 mm Svetlobne zavese Vlečna blazina Ročno in avtomatsko delovanje Ročna nastavitev hoda preko ročnega stikala Brez vzdrževanja, samomazalne, štirikratne vodila bata Mizna plošča s T-utorji Izvedba v skladu z "CE" predpisi

Stanje: rabljeno, Technical Details: Press force: 20 t Ram stroke: 6 - 60 mm Throat depth: 176 mm Ram adjustment: 55 mm Strokes per minute: 155 spm Distance table/ram: 270 mm Clear inside width: 470 mm Table dimensions: 300 x 450 mm Table pass-through opening: 90 mm Ram clamping surface: 130 x 248 mm Inclination: 28° Ram bore (slot): 25 x 65 mm Table height above floor: 775 mm Required air pressure: 5.5 - 6 bar Total power requirement: 3.5 kW Machine weight approx.: 1.0 t Machine dimensions (LxWxH) approx.: 1.3 x 1.1 x 1.95 m High-performance press Centralized lubrication with monitored light curtain (Linuflex) Stroke counter (counter mechanism) Dsdsu Nfliepfx Aflekg Additionally, a steel plate 315 x 400 x 50 mm with center hole Ø 63 mm included

Stanje: novo, Condition: new Dsdpfxsw Dvkgj Aflokg Delivery date: October 2025, interim sale/availability Country of origin: Turkey Price: €70,700 Leasing rate: €1,336.23 Pressing force: 100 t Stroke: 600 mm Table: 900 x 500 mm Installation height: 800 mm Throat depth: 400 mm Rapid traverse speed: 220 mm/s Working speed: 1 - 20 mm/s Return speed: 250 mm/s Motor: 14.65 kW Length: 1,900 mm Width: 1,700 mm Height: 4,400 mm Weight: 6,000 kg Working pressure: 30 - 239 bar Welded monoblock frame Cylinder hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rexroth Hydraulic overload valve Cooler Electrical components by Siemens 8 additional digital inputs and outputs 10-inch touchscreen Siemens S7-1200 PLC Stroke, pressure, speed, and dwell time adjustable via PLC Remote maintenance access Light curtain Safety guards Safety PLC from Siemens or Sick Two-hand control panel Reset and emergency stop buttons Equipment in accordance with CE directives

Stanje: rabljeno, Leto izdelave: 1978, Technical details: Press force: 160 t Ram stroke - max.: 500 mm Distance table/ram: max. 2,880 mm Ram speed, forward: 0.03 m/sec Ram speed, return: 0.04 m/sec Dkjdpfx Afju Nfq Eelog Ram surface: W: 1,720 x H: 1,000 mm Ram diameter: Ø 259 mm Ram bore, center hole: Ø 180 mm Operating pressure: 260 bar total power requirement: 11.0 kW Machine weight approx.: 18.8 t Machine dimensions approx. LxWxH: 7.5 x 1.6 x 1.6 m HYDRAULIC HORIZONTAL MULTIPURPOSE PRESS TÜV inspection valid until 02/2024 Specifications on the counterblock: Size W: 1,720 x H: 690 mm Counterblock lower mount = Ø 225 mm x depth = 450 mm Horizontal manual displacement: max. length 2,880 mm Specifications for the guide cylinders: 2 opposing cylinders; size Ø 230 mm x length 3,350 mm, 7 cylinders separated by adjustment groove Ø 170 x 50 mm, manually repositionable using the adjusting ring Specifications for the support bed: Steel construction, welded with 2 guiding grooves 20 mm; size LxWxH: 4,000 x 1,400 x 200 mm

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov od naročila Država porekla: Turčija Cena: 55.600 € Leasing obrok: 1.050,84 € Tlačna sila: 30 t Hod: 200 mm Bat: 500–800 mm Miza: 600x1000 mm Vgradna višina: 450 mm Hitri pomik: 100 mm/s Delovna hitrost: 18 mm/s Povratna hitrost: 165 mm/s Motor: 11 kW Dolžina: 1950 mm Širina: 1750 mm Višina: 2650 mm Teža: 4.700 kg 4-kratno vodilo bata Dkjdpfx Afewirlwsljg Miza in bat z utori v obliki črke T Ročna nastavitev hoda preko krmilnega stikala Ročno in avtomatsko delovanje Varnostne svetlobne zavese Oprema skladno s CE predpisi

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Pressing force: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance between table and ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x D=62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: 49 mm Height above floor level: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m Dksdpfow D Awmjx Afleg

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Država izvora Turčija Cena 104800 € Leasing obrok 1980,72 € Pritisk stiskalnice 150 t Hod 500 mm Bat 950 x 650 mm Miza 1200 x 750 mm Vgradna višina 750 mm Hitri hod 100 mm/s Delovna hitrost 5,5 mm/s Povratna hitrost 165 mm/s Motor 11 kW Dolžina 2200 mm Širina 2200 mm Višina 3650 mm Teža 9500 kg Delovni tlak 254 bar Sila izmetalne blazine 32 t Hod izmetalne blazine 200 mm Mizna odprtina Ø 120 mm Delovni tlak izmetalne blazine 160 bar Povratna hitrost izmetalne blazine 40 mm/s Dedpfswirl Rex Aflokg Površina izmetalne blazine 720x540 mm Foto-celice Izmetalna blazina Ročno in avtomatsko delovanje Ročna nastavitev hoda preko kam stikala Brez vzdrževanja, samo-mažejoča štirikratna vodila bata Vpenjalna plošča z T-utorji Izdelava po "CE" predpisih

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: Stamping force: 500 kN Shearing force: 9.0 t Control: Siemens Touch Panel S7 Ram adjustment: 80 mm Fixed ram stroke: 170 mm Stroke rate: 20 – 120 strokes/min Frame width: 1140 mm Shut height: 350 – 430 mm Lateral frame opening: 315 mm Table area (L x W): 1100 x 400 mm Ram area (L x W): 1100 x 400 mm Through-hole in table: 950 x 100 mm Table height above floor: 1100 mm Lateral frame passage: 315 mm Drive power AC: 230 VAC/24 VDC kW Operating pressure: 6 bar Operating hours: Machine 1: 6654 h Operating hours: Machine 2: 5970 h Total power requirement: approx. 30 kW per machine Machine weight approx.: 9.5 t per machine 2 mechanical transfer presses – PRESS LINE in automated operation. This transfer press line is currently set up for the production of vehicle sockets / electrical sockets. System equipped with: 1. Decoiler* PM245, with loop control, coil weight 2 t, coil width up to 450 mm 2. Servo feeder (roller feed) with 2 axes (transverse and longitudinal) 3. Press 1: Deep drawing press with five pneumatic ejectors (individually adjustable and expandable) 4. Feeding unit by Püschel conveyor system, drum vibratory feeder, linear vibratory feeder, capacity up to 100 parts/minute, belt oscillating conveyor for discharging deep drawn parts / transfer via steep conveyor into peat oscillating conveyor / transfer into entry of the punching press via mechanical vibratory feed rails 5. Punching press 2 (prepared for ejectors) Various safety fences, protections, safety switches, monitoring systems (Pilz PLC), adapted to machinery directives Optional: 1 unused spare flywheel gearbox Optional: Complete tool kit* for the production of vehicle sockets (e.g. for cigarette lighters or electrical devices) including full technology and technical drawings (DXF) * Dkedpfx Asu Nfttjfljg

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Turčija Cena: 86.300 € Leasing obrok: 1.631,07 € Tlačna sila: 150 t Hod: 300 mm Bata: 950x650 mm Miza: 1200x750 mm Vgradna višina: 550 mm Hitri pomik: 100 mm/s Delovna hitrost: 5,5 mm/s Hitrost povratka: 165 mm/s Motor: 11 kW Dolžina: 2200 mm Širina: 2200 mm Višina: 3250 mm Dedpowiq Tysfx Aflskg Teža: 8.200 kg 4-točkovno vodenje bata Miza in bat z T-utoroma Ročna nastavitev hoda preko krmilnega stikala Ročno in avtomatsko delovanje Svetlobne zavese Oprema v skladu s CE standardi

Stanje: rabljeno, Leto izdelave: 2003, Technical Details: Dsdpfx Afjvrygiolokg Pressing force: 60 t Stroke: 400 mm Table area: 700 x 700 mm Pass-through opening in table: Ø 100 mm Frame width: 700 mm Clearance between uprights: 700 x 1300 mm Table height above floor: 850 mm Maximum installation height: 1150 mm Installation height, table/ram upper position: 400 - 800 mm Cylinder diameter: Ø 110 mm Total power requirement: 4.8 kW Machine weight approx.: 930 kg Machine dimensions approx. (LxWxH): 1.2 x 0.7 x 3.0 m HYDRAULIC DOUBLE-COLUMN PRESS Special construction, welded from 25 mm steel plate Operating mode: single stroke Punch holder: pin M 70 x 2.5 mm and punch Ø 128 x 440 mm Table safety enclosure Round punch Ø 130 x 120 mm Hydraulic power unit

Stanje: rabljeno, Technical Details: Pressure: 160 t Table area: 1,260 x 600 mm (vertical) Table plate dimensions: 1,260 x 600 x 70 mm (vertical) Dsdeu Nfpuspfx Aflokg Ram area: 700 x 360 mm Throat depth: 300 mm Machine weight approx.: 9,000 kg Dimensions (L x W x H): 3.7 x 1.5 x 2.2 m Distance bed - ram: 1,000 mm Mounted ram assembly: L: 660 x W: 300 x H: 370 mm Pass-through rollers, one each on the right and left, with vertical adjustment 250 mm (Ø 80 x 300 mm)

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Pressing force: 63 t Strokes per minute: 65 / 130 spm Djdpfx Asu N Dafofljkg Throat depth: 315 mm Ram adjustment: 60 mm Ram stroke: 10 - 105 mm Distance table/ram: 335 mm Clearance between uprights: 355 mm Bolster plate: 800 x 610 x 85 mm Ram surface: 450 x 280 mm Compressed air: 9 bar Control voltage: 24V / 50Hz Total power requirement: 7.5 kW Machine weight approx.: 5.9 t Machine dimensions (LxWxH) approx.: 1.42 x 1.8 x 2.6 m Press with tilting frame (25°) and combined stroke and overload protection (nominal load exceeded) equipped. Available operating modes: Single stroke by foot actuation (slow and inching mode) and/or by manual actuation (slow) Continuous stroke by foot actuation (slow and fast) and/or by manual actuation (slow and fast)