Sistem Za Nanos Balzama nakup rabljenega (117.179)

Stanje: novo, Vacomats are mobile extraction units designed to remove large quantities of dust and chips in compact spaces. These clean air extraction systems (negative pressure), intended for indoor installation, can be used for single or multi-machine extraction, handling air volumes of up to 10,000 m³/h. Built in accordance with the latest EU standard EN 16770, they are particularly suitable for woodworking shops where special safety requirements apply due to the risk of dust explosion. They are suitable for materials classified under dust explosion class St1. Filter cleaning in the Vacomat XPe is carried out purely electro-mechanically via an efficient shaking motor, which automatically activates once all connected machines are switched off. The control is managed via voltage-free contacts relaying the operating status of the woodworking machines. Motorized shaking control is included in the scope of delivery. Delivery does not include coils. Motorized filter regeneration, mobile design, extraction port can be mounted on either the right or left side, and the unit can be height-reduced for transport. ----- Technical Data ----- Extraction connection Ø: 180 mm Airflow: 2,610 m³/h Rated airflow: 1,832 m³/h Max. negative pressure: 2,450 Pa Filter surface area: 13.5 m² Residual dust content: < 0.1 mg/m² Number of collection bags: 2 Motor power: 3.0 kW Dimensions (LxWxH): 2,085 x 900 x 2,130 mm Cedpfx Adju T Hriohjrh Weight: 414 kg Sound pressure level: 76 dB(A) Dust class: M Includes: integrated control cabinet

Stanje: dober (rabljeno), Technical specifications for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Specifications for installation: Number of racking rows: 1 unit Length per racking row: 33,450 mm Number of bays per row: 12 units Number of beam levels plus ground level: 2 units Volume specifications: Pallet spaces per bay: 9 units Pallet spaces per row: 108 units Total pallet spaces: 108 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max): approx. 800 kg Scope of supply includes: 13x pallet rack upright frames, used Colour: blue Frame profile: MX610 Profile dimensions: 76.2 x 63.2 x 1.8 mm Incl. horizontal and diagonal bracing, base plates Uprights are pre-assembled (bolted truss design) Height: 2,100 mm Depth: 1,050 mm 48x pallet rack beams, used Colour: yellow Box section: 140 x 40 mm Beam type: N140x40 SEG Connector: 5 hooks Clear span: 2,705 mm Max. load per beam pair: 2,400 kg, with evenly distributed load 96x safety pins, used Finish: sendzimir galvanized For securing beams against accidental lift-out 52x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 26x shim plates, used Finish: fully galvanized For levelling uprights installed on uneven floors 1x load sign With information on bay and shelf loads, manufacturer, and order number Cjdpfswk I N Usx Adhorh Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. Delivery or shipment of this item is subject to additional costs, which can be requested individually depending on the delivery location and scope of delivery.

Stanje: rabljeno, Leto izdelave: 1997, Obremenitvena teža 220 litrov Zunanji premer posode 1200 mm Premer/višina posode 1200 / 1115 mm Dolžina posode (raztegnjena) 2630 mm Širina delovne kadice 260 mm Obratovalna napetost 400 V Priključna moč 3 kW Teža stroja pribl. 700 kg Prostor potreb po širini pribl. 1,50 x 1,30 x 1,12 m - Tovarniška št.: 17645/97-07 - Brezstopenjsko nastavljivo število vrtljajev pogona preko frekvenčnega pretvornika - Čas začetka in obdelave nastavljiv preko Csdpfsxb Edhex Adhjrh časovnika

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Roll stamping machine Crjdpjq T N A Usfx Adhjh Eberhardt STA 5 x 7 for Kaiser roll stamping, star rolls, and button rolls with 3 stamping trays mobile machine connection: 400V, 16A CEE plug used machine More bakery machines in stock!

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen,

Stanje: novo, SAPI Praškasto Barvanje Popolna prevleka za dolgo zaščito. Praškasto barvanje je zelo učinkovita in široko uporabljena metoda za nanašanje zaščitne in dekorativne površine na različne vrste substratov. Gre za suhi postopek, pri katerem se fina prah, sestavljena iz smol, pigmentov in dodatkov, nanese na substrat. Prah je elektrostatično napolnjen, zato se enakomerno oprime površine in ustvari enakomerno prevleko. Za dosego optimalne oprijemljivosti in trajnosti se substrat najprej temeljito očisti in pripravi. Olja, umazanija in druge nečistoče se odstranijo, da se zagotovi čista površina. To je ključnega pomena, da se prah učinkovito poveže s substratom in ustvari trdno in dolgo obstojno prevleko. Komponente Praškastega Barvnega Sistema Tipičen sistem praškastega barvanja je sestavljen iz več komponent in naprav, potrebnih za nanašanje in strjevanje praškaste prevleke. Kabina za Pršenje in Območje Pršenja Kabina zagotavlja čisto okolje za postopek nanašanja in zagotavlja enakomerno porazdelitev praška. 🎨 Pištola za Praškasto Barvanje Pištola za praškasto barvanje se uporablja za nanašanje praškaste prevleke na delovni kos. 💨 Sistem za Napajanje s Praškom Cedpfx Adoun Sd Ujherh Sistem za napajanje s praškom je sestavljen iz lijaka ali posode, v kateri je shranjen material za praškasto barvanje. Običajno vključuje naprave, kot so črpalke za prah, dovodne cevi in sita, ki prah prenašajo iz skladišča do pištole za pršenje. 🔄 Napravite za Predobdelavo Sistemi za predobdelavo se uporabljajo za pripravo substrata pred nanašanjem praškaste prevleke. To lahko vključuje postopke, kot so čiščenje, razmaščevanje, izpiranje in obdelava površine, da se zagotovi dobra oprijemljivost in trajnost prevleke. 🧼 Peč za Strjevanje Peč za strjevanje je ključna komponenta praškastega barvnega sistema. Uporablja se za segrevanje prevlečenega substrata na ustrezno temperaturo, da se prah stopi, tekoče preide in strdi v trajno površino. Peč običajno vključuje sistem za transport ali police, ki prenašajo prevlečene dele skozi peč. 🔥 Sistem za Odsesavanje V sistemu je nameščen sistem za odsesavanje, ki odstranjuje odvečni prah, pare ali hlapne spojine, ki nastanejo med postopkom nanašanja prevleke. Pomaga pri ohranjanju čistega in varnega delovnega okolja za osebje in preprečuje kopičenje prahovih delcev v zraku. 🌬️ Iščete rešitev za Praškasto Barvanje? Iščete prilagojeno rešitev za praškasto barvanje? Specializirani smo za zagotavljanje rešitev za praškasto barvanje, ki so prilagojene vašim specifičnim potrebam. Ne glede na to, ali imate specifične zahteve glede barve, kompleksnih zasnov ali težkih substratov, je naš izkušen tim pripravljen zagotoviti izjemne rezultate. 💡 Kontaktirajte nas še danes, da se pogovorimo o vaših potrebah in nam dovolite, da razvijemo prilagojeno rešitev za praškasto barvanje. 📞 Kontaktirajte nas še danes!

Stanje: novo, Vacomats are mobile dust extractors designed to remove large volumes of dust and chips in confined spaces. These clean air extraction units (negative pressure), intended for indoor installation, can be used for single- or multi-machine extraction with air volumes of up to 10,000 m³/h. Manufactured according to the latest EU standard EN 16770, they are specifically suitable for woodworking operations where increased safety requirements apply due to the risk of dust explosions. Suitable for dusts classified under explosion group St1. Filter cleaning on the Vacomat XPe models is performed entirely electro-mechanically via an efficient shaking motor, which starts automatically once all connected machines are switched off. Control is managed via potential-free contacts triggered by the woodworking machine. The control for motorized shaking is included in the delivery. Supplied without coils. Features: - Motorized filter regeneration - Mobile design - Extraction side configurable to the right or left - Height reduction possible for transport ----- Technical Data ----- - Extraction nozzle diameter: 200 mm - Airflow: 2,495 m³/h - Rated airflow: 2,262 m³/h - Max. negative pressure: 2,000 Pa - Filter surface: 14.5 m² - Residual dust content: < 0.1 mg/m³ - Number of bags: 3 - Motor: 4.0 kW - Dimensions (LxWxH): 2,645 x 900 x 2,130 mm Crodju T Dv Espfx Adhsh - Weight: 500 kg - Sound pressure level: 73 dB(A) - Dust class: M Includes: built-on control cabinet

Stanje: dober (rabljeno), The system was designed and configured for the washing, classification, and screening of railway ballast and mineral soils. The plant consists of the following basic units: - Feed station - Washing, classification, and screening unit - Process water treatment Cedpfx Adettv Dishorh Details and further information available upon request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Système de traitement d'image comprenant une caméra monochrome 5 millions de pixels (numéro de modèle CA-H500M) et un contrôleur de traitement d'image (numéro de modèle XG-X1500). Le set comprend des câbles et un éclairage de fond blanc (numéro de modèle CA-DSW30). Type : Caméra*1 Élément de capture d'image : capteur CCD monochrome 2/3", capture haute vitesse 11x avec pixels carrés, 5 050 000 pixels Taille des cellules : 3,45 x 3,45 µm Nombre de pixels actifs : 4 990 000 pixels 2432 (H) x 2050 (V) Vitesse de transfert des pixels : 130 MHz (65 MHz x 2 canaux) Système de balayage : mode plein cadre (61,2 ms), mode entrelacé (40,3 ms) Crjdpfx Aomza Iljdhoh Système de transmission : transmission série numérique Obturateur électronique : 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, de 0,05 ms à 9000 ms réglable en valeur numérique. Monture d'objectif : monture C

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, Certificirano po DGUV do: 10/2026, leto zadnje generalne obnove: 2025, Broma stiskalnik za mlečne žemljice Stiskalnik za mlečne žemljice / kose testa za ročno polaganje / enojno upravljanje nastavljiv pritisk stiskanja dolg izhodni trak Crsdpfx Ajidp Nmjdhsh namizna naprava samo pri nas, preizkušen po DGUV V3 priključek 400V, vtikač 16A-CEE rabljeni stroj, obnovljen z garancijo + servisom Opcija: vzdrževalna pogodba storitve dostave Obiščite našo veliko razstavo pekarskih strojev!

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), Na voljo je sortirna naprava Otto za drobne dele. Ogled na lokaciji je mogoč. Cjdexfkn Hepfx Adhorh

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Our powerful sandblasting cabinet "MM 2010" operates using the pressure blasting method and is suitable for all types of blasting media thanks to its innovative media recirculation system. The bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest media types, such as stainless steel shot, steel cast grit, and other metallic abrasives, to be used without issue. Unlike competing systems, the abrasive is not vacuumed back but transported to the adjacent bucket elevator using a flat conveyor system. The bucket elevator lifts the material upwards and deposits it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed blasting media recirculation and recycling system ensures continuous abrasive supply regardless of the extraction system’s suction capacity. Thanks to the recirculation system for blasting media and innovative fan technology, the blasting cabinet features very low energy consumption (0.75 kW fan motor). Because the abrasive is not vacuumed back, there is no need for an oversized dust extraction system with high power consumption, as is required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator for infinitely adjustable blasting pressure, ranging from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blasting pressure vessel, protecting the blasting media from moisture. The pressure blasting nozzle is made from highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which enhances the service life of the blasting media and protects the cabinet from wear. An air blow gun is installed for cleaning blasted workpieces and the interior walls of the cabinet. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber and maximum service life for the blasting media. The dedusting unit features continuous filter cartridge cleaning by means of pulse-jet compressed air, ensuring long filter service life and consistently stable extraction performance in the long term. Loading of the blasting chamber is carried out via an angled front flap which swings fully upwards, allowing loading by forklift or crane. The robust working grating supports up to 500 kg. To ensure optimal visibility inside the chamber, two powerful and energy-saving LED lights are mounted on the cabinet roof, dust- and wear-protected by their rooftop installation. Credpewc Nrnsfx Adheh The system is operated via a modern touch display. For safe operation, the blasting cabinet is fitted with a door safety switch. The installed viewing windows are made of toughened safety glass (ESG) and protected with a wear-resistant film.

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 16550, Offer 23433 Technical Specifications - Stand-alone unit for filtering welding fumes and grinding dust - Exhaust air can be routed either into the workspace or outside - Stationary or semi-mobile installation - Airflow volume up to approx. 500 m³/h - Free blowing: 860 m³/h - Maximum vacuum: -26 kPa - Turbine capacity: 1,050 m³/h - Separation efficiency according to filter class M: > 99% - Filter surface: 3.4 m² - Automatic filter cleaning by reverse airflow during suction operation - Dust collection container - Compressed air connection: 3 L/day - Connection pipe inlet and outlet each: 100 mm - Silencer Crsdpforl Iwzox Adhoh - Electrical connection: 400 V / 13 kW - Required space: approx. W 1200 x H 2000 x D 700 mm - Weight: approx. 350 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Profil T18 Vhodna širina 1250 mm Debelina materiala 0,5 – 0,63 mm Leto izdelave 2002 Krmiljenje Siemens PLC (novo) Crodpfx Ajhryh Ujdheh Stroje si je možno po predhodnem dogovoru ogledati v obratovanju v naši tovarni v 94486 Osterhofen.

Stanje: dober (rabljeno), Approx. 4 units h.a.l.m. solar cell measuring system, cetisPV-CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P complete device – used -: Price per unit ex stock: €8,350 (net) Complete IV Measurement System Codpoukiu Nsfx Adhjrh Manufacturer: H.A.L.M. Model: cetisPV Consisting of: CTL1, cetisPV-XF2-C, cetisPV-XF2-R, cetisPV-XF2-P complete device Year of manufacture: unknown Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 662509, trajanje garancije: 6 meseci, Used machine – Year of manufacture 06/2011 Professionally overhauled, with 6 months warranty* The Quadro Filius is a program-controlled machine for the gentle processing of all types of bread roll doughs. The following types of rolls can be produced: - Rustic rolls, square - Triangular rolls - Seeded sticks The machine stands out for its high flexibility in the production of these baked goods for small and medium-sized bakeries. It can be combined with downstream seeding units or a rotary table system. Operation is via a text display. Codpfew A Nxzox Adhorh The machine has been final inspected and tested with dough by our master baker. Equipment: + Head unit, year 06/2011 + 3-row cutting roller + Triangle stamping tool + Moistening station, moistens dough pieces from above and below + Seeding station with rotary table + Integrated SIEMENS control: operation via text display + Hinged door for the cutting unit + Equipped with new belts + Adjustable flour duster on the strand + Machine is supplied with operating manual Additional cutting rollers and stamping tools available at extra cost. *Exclusions: controls / circuit boards / displays / sensors Technical data: Year of manufacture: 06/2011 Piece output per hour: 1,400 – 4,000 pieces (depending on product & cutting roller) Dough output per hour: approx. 320 kg (depending on product) Dough yield: up to 170 (depending on product) Weight range: 25 – 360 grams (depending on product & cutting roller) Machine frame: Stainless steel, brushed Cladding sheets: Stainless steel, brushed Connection: 230/400 V, 1 kW, 50 Hz, 16A CEE plug Compressed air: 6 – 8 bar Net weight: 280 kg Cable length: 3 m

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovno območje: 6.500 mm, vrsta vhodnega toka: trifazni, skupna širina: 1.629 mm, skupna višina: 2.525 mm, skupna dolžina: 10.500 mm, dolžina mize: 6.500 mm, skupna masa: 3.500 kg, premer cevi: 220 mm, moč: 15 kW (20,39 KM), laserska moč: 6.000 W, trajanje garancije: 24 meseci, Oprema: hladilna enota, varnostna svetlobna zapora, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15 – 160 mm Format The skytube-pro-6500×3 profile and tube fiber laser cutting system for fast material changeovers, with up to 6kW effective cutting power for your production, is the smart and efficient solution for tube laser processing. Suitable for the laser cutting of round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine delivers maximum productivity during production changes. The task: the fiber laser with up to 6kW for a wide range of metalworking applications! Unmatched Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure excellent cutting performance and accuracy. Codpfxerh Iw Tj Adhjrh The tube and profile laser processing machine designed for production requires minimal floor space—simply clever! Ingenious solutions 100% made in Saxony! Tubes and profiles from 15 x 15 up to 160 x 160 mm can be 3D cut with efficient fiber laser technology. The semi-automatic 6-fold profile tube loading chain system enables rapid changeovers between jobs. With the optional bundle loader, you can work independently. Bevel Cutting A feature that changes everything: Thanks to the capability of our machines to tilt their cutting head up to 50° along an additional fifth axis, one of the greatest challenges of modern profile machining is now solved. When the laser beam always hits the tube exactly perpendicular, it results in an elliptical cut edge. The ability to angle the tube laser cutting head allows for truly bevelled cuts in combination with the feed axis. Work safely with the skyTUBE Laser! The skyTUBE Pro is a class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and strict compliance with the highest standards and regulations. Technical Specifications: · Enclosed industrial housing, laser class 1 (optionally class 4) · Working area for tube cutting system/clamping: Uniform tubes from 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Tube working area X 6500; Y ±100; Z 150; A ±360°; U ±50° · Automatic material feed for up to 6 x 160 mm profiles from 3500 – 7000 mm · Automatic material removal system for profile cut-offs, design tailored to profile length · Z drive system: Ballscrew axis system with PTI SVZ system · X/Y drive system: Linear axis system with PTI AC-SERVO system · Productive cutting speeds: depending on material and laser configuration, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Maximum footprint dimensions (W x D x H): 11600 mm x 2830 mm x 2100 mm + unloading system depending on profile cut length

Stanje: dober (rabljeno), Painting unit, GRACO MERKUR paint pump + Graco G40 spray gun. Csdpjulc S Rjfx Adherh

Stanje: rabljeno, Leto izdelave: 2014, številka stroja/vozila: 950144105510003, Reg. št. 25044 Filtrirna naprava za varilni dim // Filtrirna naprava za brusni prah Codpfx Aswgd A Aodhjrh Tehnični podatki - Pokončna izvedba za filtriranje varilnega dima in brušenega prahu - Razred varilnega dima „W 3“ - Primerno za filtriranje varilnega dima iz jekel z - vsebnostjo kroma in niklja nad 30% - Izpušni zrak se lahko spelje v delovni prostor (npr. za ogrevanje) ali navzven - Krmiljenje TEKA - Pretok zraka do ca. 5000 m³/h - Največji statični tlak do ca. 3000 Pa - 4 filtrske kartuše BIAM - Način čiščenja: Pulse Jet, ločevalna učinkovitost > 99 % - Ločena komandna omara - Priključek 400 V / 5,5 kW - Prostorske zahteve filtrske kocke ca. Š 850 x V 3150 x G 850 mm - Teža ca. 380 kg

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Popolna odsesovalna naprava za proizvodno linijo za razrez hlodovine LSH 350/4500. V obratovanju od 01/2023. Naprava nima proizvajalca, sestavljena je iz posameznih komponent. Nameščena na podlagi izračuna, dokumentacija na voljo. Credpfxexa Excj Adhsh

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 1912-06, Offer 24821 Fine Dust Extraction System for Thermal Cutting Machine - Plasma Cutting Machine Technical Specifications: Credjvgbyaspfx Adhoh - Extraction unit consisting of filter modules and radial fan - Fine dust filter with 15 cartridges - Cartridge filter with pneumatic cleaning system - Airflow rate approx. 4,000 m³/h - Compressed air connection: 6 - 7 bar - Electrical connection: 400 V, 5.5 kW - Dust collection tray - Required space approx.: W 1,500 x D 2,000 x H 2,750 mm - Weight approx.: 900 kg

Stanje: dober (rabljeno), Leto izdelave: 2005, Offer 21553 Credet E Nwaopfx Adhoh Technical Data: - Extraction unit with control system - Bag filter cleaning via compressed air pulses - Air flow rate 425 m³/h - Filter surface area 3.7 m² - Compressed air connection 4 - 6 bar - Power supply 400 V - Separate fan output 1.5 kW - Total weight approx. 150 kg - Space requirement W 600 x D 600 x H 1700 mm

Stanje: dober (rabljeno), Offer 23501 Gas Receiving Unit with Pressure Reducer + Separator Technical specifications (approx.): - Gas receiving unit suitable for nitrogen, argon, forming gas, hydrogen Cedjrf Uqzspfx Adhsrh - From plasma cutting system + oxy-fuel cutting system, Manufacturer: ESAB - Mounted on stainless steel sheet as shown - Various pressure reducers and separators included - Weight approx. 80 kg - Installation footprint approx.: W 1.6 x H 1.5 x D 0.2 m

Stanje: dober (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 9501441040100301, Offer 24469 Welding Fume Filtration Unit with Spark Pre-Separator + Extraction Arms Technical Data - Upright design for filtering welding fumes and grinding dusts - Welding fume class “W 3” - Suitable for filtering fumes from welding steels containing over 30% chromium and nickel - Exhaust air can be discharged into the work area (e.g. for heating) or vented outside - TEKA control system - Airflow volume up to approx. 4000 m³/h Csdpfxouwl Due Adhsrh - Max. static pressure up to approx. 3000 Pa - 4 filter cartridges, type BIAM - Cleaning system: pulse jet, separation efficiency > 99% - Separate control cabinet - Connection: 400 V / 4 kW - Space requirement filter cube: approx. W 850 x H 3150 x D 850 mm - Weight: approx. 380 kg - Separate spark pre-separator, manufacturer TEKA, type FVS 4000–6000 - Space requirement spark separator: W 850 x H 1650 x D 950 mm - 3 articulated extraction arms - Piping

Stanje: dober (rabljeno), Leto izdelave: 2001, Offer 24367 Orbital Welding System + Pipe Cutting Machine Csdpfevhchhex Adhsrh Technical Data: - Orbital Welding Device AXXAIR SALS 150 (AIR LIQUIDE Prestotig 180) - Cooling Unit ACW 015 (SAF Prestocool) - Circumferential Seam Welding Unit AXXAIR CC 220 with motorized rotation - Pipe Cutting Machine AXXAIR CC 80 - Transport Cart - Table Height: 830 mm - Power Supply: 220 V - Required Space: approx. W 1400 x H 1450 x D 1000 mm - Weight: approx. 150 kg