Scm Windor 60 nakup rabljenega (617)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Hodpfxetwzyfs Afaop Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Hsdpfx Ashtuvrsfaep Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Drive: • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces Hedpfx Asd E Ixzsfasp • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • 10.4" touch screen display • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Hodpfxoyftzks Afajp Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address & telephone number!)

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Hedpocrnm Nefx Afasp Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: novo, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and height. Gray cast iron saw unit ensures torsional rigidity and vibration-free operation. Easy panel handling thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – sliding table guided by a highly precise, time-proven ball contact system for smooth operation. Scoring unit features its own drive and is easily adjustable from outside. Saw unit accommodates saw blades up to 400 mm diameter. Scoring blade diameter: 160 mm. Two-position manually adjustable saw blade pendulum guard. 3-axis control. Motorized parallel fence with electronic position control. Includes: - Position display via encoder - Adjustment via ball screw spindle - Stepless setting via switch or automatic positioning system - Incremental adjustment capability - Swiveling fence retraction below table - Cutting width 1270 mm - Programmed movement of motorized saw unit adjustment and tilting UP version: - Swiveling operator panel for maximum flexibility X version: - Compex miter fence for fast, precise miter cuts with automatic length compensation (length adjustment) - Outrigger with angle-adjustable telescopic crosscut fence - Optional degree scale division (Art.-No.: 5510403) - Longitudinal fence with 2 LCD position displays Options included: Hedped Akygjfx Afaop - Version with max. sliding table travel of 3200 mm - Integrated main and scoring blade start/stop switches on the squaring frame - Squaring frame with CompeX feature - Version “READY 3 UP” - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with parallel fence: 1270 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height 90°: 136 mm Max. cutting height 45°: 97 mm Max. cutting height -45°: 60 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: Hsdpfscuwptox Afasp – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Hedpfxehvan Ie Afaep Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Hsdpfx Afsdibw Asaep Work table dimensions: 600 x 520 mm Work table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: rabljeno, SCM ST1 Krožna žaga in Rezkalni stroj Hjdpfx Aezhnncofajp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, številka stroja/vozila: AH/005553, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 78 A, vhodna frekvenca: 50 Hz, skupna masa: 4.400 kg, Main specifications: • Panel thickness: max 60 mm • Edge thickness: 0.4 - 3 mm (Solid wood up to [12] mm) • Feed speed: up to 25 m/min • Glue system: [EVA / PUR] Hedpezgnx Sofx Afasp Configuration: • Pre-milling unit • Gluing unit with pressure rollers • End-trimming unit • Top/Bottom trimming unit (rough & fine) • Corner rounding unit • Radius edge scraper • Glue scraper • Buffing unit Machine Condition: • Excellent working condition. • Regularly maintained. • Available for inspection and testing under power.

Stanje: novo, SCM Olimpic 500 HT - Avtomatski robni lepilni stroj Hsdpfxozgf Ids Afaop Nova stroj z garancijo. - Olimpic 500 - izvedba "HP T-ER2" - Upravljalna konzola "eye-S" (nadzorna plošča) - Programska oprema človek-stroj vmesnik (HMI) "Maestro active edge" - Enota za fino rezkanje in radij nože radius = 1 mm - Enota za fino rezkanje in radij nože radius = 2 mm - Elektronsko pozicioniranje zgornje pritisne letve - Distančniki na vhodnem vodilu - Komplet "SAVENERGY" - Notranja osvetlitev kabine in lepilnega območja - Senzorske rolice za "Nesting" - Razpršilna enota za ločilno sredstvo "AAR" 1 - Razpršilna enota za končno obdelavo roba - Razpršilna enota za občutljive robove - Priključek za spajanje "RT-V1" - Naprava "EASY SIZE" - Lepilna enota "VC-VM" - Keramična infrardeča svetilka - Elektronsko pozicioniranje pritisnih valjev - Odrezovalna enota "K-2 Radius" - Fazna in radijska rezkalna enota "R-HP Multiedge 2R" - Zaoblitvena enota "Round 2-A Multiedge 1R" - Komplet MULTIEDGE 3, samodejne pozicije ravno/R/R za "Round 2-A" - Radij rezka za odstranjevanje "RAS-HP Multiedge 2R" - Površinski strgalo "RC-N" - Polirna enota "SP-V" Stroj je nov in še vedno v originalni embalaži. Zagotovimo lahko zagon v Nemčiji in Avstriji. Trenutno je v Nemčiji mogoča subvencija v višini 15 %, pri tem vam z veseljem pomagamo. Akcijski stroj po posebni ceni.

Stanje: rabljeno, Leto izdelave: 1996, Delovna širina: 520 mm Skobelni valj: Tersa Število nožev: 4 Dolžina poravnalne mize: 2300 mm Nastavljiv kot doravnalnega vodila: da Dvig poravnalnih miz: pnevmatski Največja debelina prehoda debelinke: 250 mm Nastavitev višine debelinske mize: električna Prikaz debeline oblanja: digitalni Hitrost podajanja: 5 / 8 / 12 / 19 m/min Vlečni valj: jeklo Izpušni valj: guma Pritiskalna letev: členkasta Valji v mizi: ne Moč motorja: 5,5kW Zavorni motor: da, avtomatski Priključek za odsesavanje: 120 mm Dolžina stroja: 2300 mm Širina stroja: 1100 mm Hedpfx Afjy A Hh Tsaep Teža: 980 kg

Stanje: rabljeno, Leto izdelave: 1992, Delovna širina: 520 mm Višina skobljanja: 250 mm Hjdpsyt E Raefx Afasp Skoblarska gred: lamelni noži Število nožev: 4 Nastavitev višine: električna Prikaz debeline skobljanja: skala Hitrost podajanja: 2 hitrosti Vhodni valj: jeklo Izhodni valj: jeklo Namizni valji: ne Moč motorja: 5,5 kW Priključek za odsesovanje: 140 mm Dolžina stroja: 1200 mm Širina stroja: 1400 mm Teža: ca. 900 kg

Stanje: rabljeno, Leto izdelave: 2005, Delovna širina: 180 mm Delovna višina: 110 mm Število delovnih vreten: 4 Razporeditev vreten: spodaj, desno, levo, zgoraj Moč motorja spodnjega in zgornjega vretena: 7,5 kW Moč motorja desnega in levega vretena: 7,5 kW Nastavitev spodnjega vretena: - Nastavitev desnega vretena: - Nastavitev levega vretena: ročni volan Nastavitev zgornjega vretena: ročni volan Skobelni glavi spodaj in zgoraj: Centrolock Skobelni glavi levo in desno: Centrolock v kombinaciji s profilirno možnostjo Hitrost podajanja: 2 Pritisk podajalnih valjev: vzmet Poraba toka: 32,8 A Priključek za odsesavanje: Dolžina stroja: Hedpfx Asyq R Aiefajp Širina stroja: Teža:

Stanje: rabljeno, Leto izdelave: 1999, Carriage Length: 3800 mm Cutting Width at Rip Fence: 1500 mm Cutting Width at Crosscut Fence: 3200 mm Cutting Depth: 140 mm Scoring Unit: No Saw Blade Height Adjustment: Electric Saw Blade Tilt Adjustment: Electric Rip Fence Adjustment: Electric / Position Control Saw Blade Angle Display: Digital Cutting Height Display: - Rip Fence Display: Digital Crosscut Fence Display: Scale Saw Blade Diameter: 400 mm Speeds: 3 Motor Power: 7.5 kW Motor Brake: Yes, automatic Extraction Connection: 80 mm and 120 mm Hodpfx Afsvxi Ddjaop Machine Length: 3900 mm Machine Width: 2200 mm Weight: 1000 kg

Stanje: rabljeno, Leto izdelave: 2022, OBOSTRANSKO ZASUKLJIVA ŽAGAŠKA ENOTA: MAKSIMALNA VIŠINA REZA BREZ KOMPROMISOV. OKVIR ZA OBROBNO REZANJE FULL SUPPORT & WIRELESS: UPORABA IN PRECIZNA MEHANIKA. KONSOLA eye-S: UDOBNJE UPRAVLJANJE VSEH FUNKCIJ PREK KRMILNEGA SISTEMA. Tehnični podatki Linvincibile si x Največja višina reza pri 90° (mm) 200 s krožnim žaginim listom 550mm Največja višina reza pri +45° (mm) 130 s krožnim žaginim listom 550mm Največja višina reza pri -45° (mm) 105 s krožnim žaginim listom 550mm Zasuk krožnega žaginega lista (stopinje) -46 ÷ +46 Dviganje in zasuk žagaške enote programabilen Prikaz upravljanja/višine dela Easy Touch Hitrost krožnega žaginega lista (obr/min) 3000 ÷ 5000 (inverter) Glavna moč motorja kW (KM) 9 (12) Hz50 Formati reza: - z vozičkom 3200 (mm) - z vozičkom 3800 (mm) 3200x3200 3800x3200 Širina reza s paralelnim vodilom (mm) 1600 Premer sesalne odprtine: - na ogrodju (mm) - na zaščiti žaginega lista (mm) - na razcepkalu (mm) 120 100 Osnovna oprema - voziček za obrobno rezanje v celoti iz aluminijaste konstrukcije z vodilnim sistemom na vdelanih, kaljenih in lokasto brušenih jeklenih vodilih s povečano kontaktno površino - izvedba z vozičkom za obrobno rezanje 3200 mm - 10 let garancije na vodila vozička - vklopni/izklopni gumb za glavno žago/predrezilo na vozičku - eye-S 15" elektronsko upravljanje kompletno z: * 15"-touchscreen monitorjem * Neposredno upravljanje naslednjih os delovnega procesa z ročnim, polavtomatskim, avtomatskim in inkrementalnim načinom: - nastavitev višine glavnega žaginega lista - naklon žagaške enote - nastavitev paralelnega vodila - nastavitev višine in strani predrezila (predrezilo se pri vklopu samodejno nastavi v želen položaj, pri izklopu pa zniža) * Prilagoditev hitrosti z inverterjem * Funkcije pomoči operaterju za izvajanje zahtevnih rezov * Možnost shranjevanja do 1000 programov z ustrezno sliko * Možnost shranjevanja do 1000 različnih orodij z ustrezno sliko * Upravljanje rezov iz prednaloženih parametričnih programov * Možnost ustvarjanja in shranjevanja novih zaporednih delovnih programov * Samodejni prevzem delovnih mer iz aplikacije Thundercut * USB priključek * Priprava za povezavo v omrežje - Pomožne funkcije elektronskega upravljanja: * Določitev pravilnega položaja prislona na vzdolžnem vodilu pri formatnih rezih z nagnjenim žaginim listom * Določitev pravilnega položaja prislona na vzdolžnem vodilu pri poševnih rezih s kotnim prislonom na delovni mizi z ali brez nagnjenega žaginega lista - Zasukljiva upravljalna konzola nad mizo - Programabilen paralelni prislon z vodilom THK in voden ose preko robustnega krogličnega vretena, hitrost pomika 25 m/min - Paralelni prislon popolnoma zložljiv pod delovno mizo, širina reza 1600 mm - Podporna roka za okvir obrobnega reza z pozicioniranjem na prizmatičnih linearnih vodilih s krogličnimi pušami - "Full Support & Wireless". Okvir za poševne reze s popolno brezžično funkcijo. Nastavitve kota od +50° do -50° pravokotno na rezalno os z možnostjo fine nastavitve. Sistem zaznavanja kota prek magnetnega traku in LCD prikaza. Posodobitev položaja vzdolžnega prislona v realnem času s tremi LCD prikazi pri spremembi zasuka žaginega lista in/ali reza pod kotom. - Moč motorja 9kW (12KM) 50Hz - 11kW (15KM) 60Hz - Inverter za elektronsko regulacijo hitrosti od 3000 do 5000 obr/min. Hjdpfxjzh Hwvo Afaep

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Hjdjvvi I Ropfx Afajp Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Hsdpfevwbp Ajx Afaep

Stanje: rabljeno, Leto izdelave: 2011, Obdelovalna velikost v X-smeri: 2770 mm Obdelovalna velikost v Y-smeri: 1220 mm Obdelovalna debelina (Z-mera): 80 mm Zasnova stroja: portalni stroj Moč glavnega vretena: 11,0 kW Hitrost glavnega vretena: 1500 - 24.000 obr/min Vektorsko vodeno vreteno: Da Vpenjalni sistem: HSK 63 F Hlajenje vretena: zračno hlajenje Število osi: 3 Menjalec orodij: Da, kos Število mest za menjavo orodij: 10 kos Pisalniška tipkovnica: Da Miška: Da Programski sistem: Xilog Plus DXF vmesnik: Da Možna spletna povezava: Da CD-ROM pogon: Da Izvedba mize: rešetkasta miza Ustavljalni sistem: ustavljalni valj Hodpovvi Htsfx Afaep Število vakuumskih črpalk: 1 Moč vakuumske črpalke: 250 m³/h Zavarovanje: varnostne pohodljive preproge Lokacija skladišča: Sonnefeld

Stanje: rabljeno, Leto izdelave: 2004, Lokacija skladišča: Nattheim Hedpsvvi Hysfx Afajp

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. Hsdpfxevvi N Is Afaop The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...

Stanje: rabljeno, Leto izdelave: 1999, Lokacija skladišča: Nattheim Hjdpfxsvvi Rxj Afaop

Stanje: rabljeno, Leto izdelave: 2019, including tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center comes with a comprehensive array of milling and drilling tools to meet any woodworking requirement. - Highly efficient: equipped with drilling spindles running at 8,000 rpm and the industry's most robust spindle technology, offering over 1,000 maintenance-free operating hours. - Optimal and completely equipped: the suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be tailored precisely to your needs. Hsdpfsvvi Scox Afajp - Easy and intuitive programming thanks to integrated Cad-Cam MAESTRO CNC software. - User-friendly operation: the lowered machine frame provides easy access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed. In the PRO SPACE version, no additional protective infrastructure is required. Supporting structure The supporting frame is made from an exceptionally sturdy, monolithic steel base, heavily ribbed and extremely robust. The extra-wide support surface is specially designed to give the machine maximum stability and to ensure constant precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry. The machining unit is equipped with a balanced, stable, and highly durable support structure that withstands heavy loads, guaranteeing top-tier performance and superior accuracy. The moving gantry is made from a single, solid piece, anchored to the base, and runs on premium prismatic rails with ball-bearing carriages. The machining unit is attached to this and moves in the Y and Z axes, also on prismatic rails with ball-bearing carriages. The movement of the lower mobile unit (X axis) and the machining unit along the gantry (Y axis) is ensured by a rack-and-pinion drive with helical gears, resulting in greater tooth engagement for increased acceleration and higher speeds along the X and Y axes. The specially designed helical gearing reduces wear on mechanical parts and enables quieter operation. The vertical Z-axis is driven by a ball screw, which ensures perfect balance under dynamic load, as well as high acceleration and deceleration speeds. The main milling unit is directly coupled to the Z-axis carriage, providing extremely fine processing quality by eliminating vibrations. The X-Y-Z axis movements are driven by brushless motors powered by static inverters, which provide: - Shorter machining times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No setup required upon machine start-up due to absolute encoders - Elimination of general maintenance work as the brushless system has no brushes The control and management of all axes and working elements is handled via e

Stanje: rabljeno, Leto izdelave: 1995, Lokacija skladišča: Nattheim Hedpfx Afjwkirqoaop