Scm Windor 60 nakup rabljenega (599)

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 3.200 mm, širina obdelovanca (maks.): 200 mm, višina obdelovanca (maks.): 130 mm, TECHNICAL DETAILS Workpiece Dimensions Max. workpiece length: 3,200 mm Lodpfxoxx Un Rs Ab Tsri Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Working table height for profiling: 850 mm Feed roller diameter: 100 mm Feed roller centre distance: 150 mm Cross-Cut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Milling Unit for Tenoning High-performance spindle with top bearing: diameter 50 mm, length 620 mm Motor power: 7.5 kW Speed: 3,500 rpm Max. tool diameter: 320 mm Axis travel under working table: 575 mm Milling Unit for Profiling Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./Max. tool diameter: 130 - 250 mm Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool pockets: 24 Max. weight per tool: 10 kg EQUIPMENT Automatic Jolly anti-splinter protection Automatic brake RAPID 24 automatic tool changer Quick vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm Lsdpst R T Hcsfx Ab Tjri - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Lrjdpfxoitvkue Ab Tsi Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 3.200 mm, premer orodja: 400 mm, premer vretena: 50 mm, pomik vretena: 640 mm, največja hitrost vretena: 3.000 obr/min, dolžina vretena za rezkanje: 320 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: Klimatska naprava, delovna višina: 130 mm, delovna širina: 200 mm, SCM Windor 60/100 – Angular Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Plant Description This production line is a window and door manufacturing line of the type Windor 60/100 by SCM Group, year of manufacture 2005. It is a CNC-controlled angular processing centre designed for industrial machining of frame and sash components. The system is engineered for series production, enabling precise and reproducible machining through integrated process steps. Ljdpfx Aex Nqqxob Tjri 2. Main Components of the System 2.1 Angular Processing Centre SCM Windor 60/100 The SCM Windor 60/100 features a modular design and is constructed as an angular system. Machining takes place on a tenoning side and a profiling side arranged at right angles to one another. The plant combines multiple operations such as milling, drilling, grooving, rebating, and tenoning in a continuous CNC-controlled process. Key Features: * CNC multi-side machining * Multiple milling and processing spindles * Automated tool guidance and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and serves for the precise drilling of joints and hardware fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile milling operations, consisting of two processing sides: Right Side: * Lifting spindle with height adjustment * For variable profile and contour processing Left Side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling tasks 2.4 Löwer Surface Sander A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding and improves the surface quality of the machined components. 3. Control, Operation, and Safety The plant is equipped with a CNC control system, which manages all machining sequences, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained specialist personnel. The safety features correspond to the state of the art at the time of installation (year 2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, installation of a 10-spindle SCM Topset XL planer is intended. The machine will be operated as a stand-alone processing station at a separate location within the production hall and will not be directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07/01/2026

Stanje: rabljeno, Leto izdelave: 2006, Schlitzspindel 2 kos. Število rezkalnih agregatov: 5 kos. Premer vretena: 50 mm SCM Windor 40 R linija za izdelavo oken, letnik 2006 ----- Stroj je del prodaje celotne delavnice za izdelavo oken, glej skladiščno številko 1305-6979. Stroji so še vedno priključeni in pripravljeni za demonstracijo. Tehnični povzetek: ----- Lredpfoyn R Imex Ab Toi - 2 dolgi špranjski vretena, CNC krmiljena - Optima 16: vrtalni agregati za čelne in vzdolžne vrtine - ROTATEN: naprava za poševna okna - 3 dolgi profilni vreteni, CNC krmiljeni + agregat zgoraj in spodaj - Transportni voziček za majhna okenska krila - Povratni sistem za obdelovance Možnosti s doplačilom: ----- - rabljena Leitz orodja za okna in vrata za SCM Windor 40 R. Cena: 10.000 EUR - ločen OKOMA UF 3 stroj za prekrivanje z ustreznimi orodji za sisteme SCM Windor 40 R. Cena: 2.000 EUR - rabljena naprava za izsesavanje in filtracijo odpada za SCM Windor 40 R (glej priložen PDF za več informacij). Cena: 5.500 EUR (tehnični podatki po podatkih proizvajalca, brez garancije!)

Stanje: rabljeno, Number of machines: 9 units. Wooden window production line for sale on behalf of the customer. Machines can be viewed while still in operation. Sale includes machines as well as tools and programming for the manufactured systems. Incl. production of angled windows and arched windows. Item 1: Weinig Powermat 500, year 2010, window version ----- - 6 spindles, 5 x PowerLock - 8,000 rpm - large PowerCom controller - Spindles 2, 3, 4 axis CNC-controlled - Spindles 2, 3, 4, 5 radial CNC-controlled - Window package for glazing bead cutting: pneumatic cycling of right and top spindles for bead cutting - incl. existing Leitz planing and bead tools - in line with Maweg single timber sanding machine Saturn Duo, year 1985, as well as return conveyor system for workpieces Item 2: SCM Windor 40 R window line, year 2006 ----- - 2 long slot spindles, CNC-controlled - Optima 16: drilling units for end and longitudinal drilling - ROTATEN: angled window device - 3 long profile spindles, CNC-controlled + unit from above and below - sash transfer trolley for small sashes - workpiece return - incl. Leitz window and door tools - incl. separate OKOMA UF 3 rebate milling machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year 2018 ----- - gantry machine, 5-axis Drive 5C+ with 15 kW - overhead laser - working area 4200 mm length, 1350 mm depth - disc tool changer 32 positions - linear tool changer 8 positions - fixed drilling head 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - connection for PowerCLamp clamps, 8 pcs. - approx. 30 vacuum clamps - 4 x PowerCLamp clamps - WoodWop - chip conveyor - various small solid wood clamps, used for box windows - incl. Leitz tools for Homag with arch window production - incl. Barbaric vacuum lifter, year 2015 Lrsdpfx Aboyclwxe Toi Item 4: Löwer MZP 1 mini dovetail press ----- - for arch window production Item 5: S+S frame press type Bavaria 200 L, year 2014 ----- - working area 4000 x 2600 mm - with center pressure beam and cross pressure device - motorized width adjustment - basic equipment for counter profiles - angled window control - oscillating pressure plates + extension for pointed windows - intermediate inserts for small size pressing - various supporting plates for counter profiles and counter profiles Item 6: Striffler sash hardware table ----- - with automatic screwdriver and screw feed - hardware shelf - punch for Roto hardware Item 7: Tools ----- All tools belonging to the machines for the wood + wood-aluminium systems IV 72 + 92 mm as seen in the PDF: - windows - lift-sliding doors - arch and angled windows - box windows - entrance doors in many variants - putty rebate variants - ... Sale of the tools in their current condition, scope, and with accessories as existing. Note on window sections, tool drawings, tool system listings: Engelfried GmbH does not provide any warranty that the actually available tools correspond with the systems listed and depicted.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, SCM Wide Belt Calibration and Fine Finishing Sander Model: dmc sd 60 RCS 135 Technical Specifications: - Working width: 1,100 mm - Min./max. working height: 4–170 mm - Sanding belt width: 1,120 mm - Sanding belt length: 2,150 mm - Main motor power: 11 (15) kW (HP) - Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) - Feed speed: 4.5/9 m/min Standard Equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore – 1st station - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore – 2nd station - Hard sanding pad with manual working height adjustment - Motor power for first unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current consumption - Electronic display for working height - Electronically controlled sanding belt oscillation Lrjdpfx Abjtwqn Ss Toi - Rubber pressure rollers - Kick-back protection at infeed ahead of the first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at both the infeed and outfeed of the work table - Conveyor feed with two speeds: 4.5 / 9 m/min via gear motor - Automatic belt centering Includes the following special equipment: - 1x version "B" for RCS with: pneumatic on/off control for roller on 1st unit "R" + pneumatic on/off control for roller on 2nd unit "CS" + "MESAR" elastic segmented sanding pad + pneumatic on/off control for the sanding pad unit + electronic programming unit "LOGIC 50" + electronic working height adjustment - 1x CE safety specifications - 1x roller table at infeed and outfeed for long workpieces, equipped with 5 idler rollers - 1x "RA" helical-ribbed steel contact roller for 1st unit - 1x 15 kW main motor - 1x sanding belt wear optimizer - 1x LED interior lighting - 1x door with viewing window on the rear side - 1x Logic SC control system

Stanje: novo, - NEW - GENERAL FEATURES: Machine Frame and Work Table * Steel structure with electrical control cabinet located at the front of the machine * Sanding belts inserted from the left side of the machine * Motorized table height adjustment * Main motor integrated into the machine frame Electrical Equipment * Electromechanical control panel on the left front side of the machine * Automatic star-delta starter for the main motor * Motor protection switches for the motors * Motors with insulation class IP 54 Emergency and Safety Devices * Safety microswitch for thickness limit exceedance * Automatic brake for immediate stop of the aggregates * Emergency stop bar at the workpiece infeed * Mushroom emergency stop buttons at workpiece infeed and outfeed * Lockable main switch * Automatic emergency shutdown of the machine in case of: - Sanding belt breakage - Unsufficiently tensioned sanding belt - Lateral deviation of the sanding belt - Lack of compressed air - Main motor overload Note: The standard version with 400 Volt 50 Hz requires a three-phase mains supply + neutral wire + earth wire. If the 400 Volt power supply has no neutral wire, a single-phase transformer from the price list must be ordered. The same transformer must also be ordered for machines with voltage higher than 400 Volts, regardless of whether a neutral wire is present. The version of the machine with 220 or 230 Volts (50 or 60 Hz) is available at a surcharge (see price list). STANDARD BASIC MACHINE EQUIPMENT - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual working height adjustment - Main motor 11 kW (15 HP) - Electronic ammeter for the main motor to display current consumption - Electronic display for working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at infeed before the first aggregate - Rubber feed belt 60 Sh - Roller table with two rollers at infeed and outfeed of the work table - Feed belt with two speeds 4.5 / 9 m/min with geared motor - Automatic belt centering Lodpfxovwfrnj Ab Teri Working width mm 1,100 Min./Max. working height mm 4 - 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Main motor output kW (HP) 11 (15) Geared motor kW (HP) 0.45/0.8 (0.6/1.1) Feed speed m/min 4.5/9 Consisting of: 10.90.87 European safety standards (C.E. mark) 93.07.31 Volt 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10-inch control panel with "eye-S" software integration 31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate 97.50.71 Main motor 15 kW (20 HP)

Leto izdelave: 2014, stanje: skoraj kot novo (rabljeno), "EASY PLUS" electronic control from the control panel, 2 axes: - Automatic control of the left spindle, vertical and horizontal adjustment of the upper spindle. - Feed speed selection. - 7" color LCD display Min. working width (finished dimension): 25 mm Max. working width (finished dimension): 230 mm Min. working height (finished dimension): 6 mm Max. working height (finished dimension): 120 mm Min. length of single piece: 450 mm Variable feed speed controlled by frequency inverter: 5 - 25 m/min Ljdpfsh Nvt Usx Ab Tjri Pneumatic feed roller pressure Top feed roller positioned in front of the jointer Feed motor power: 3 kW Jointer motor power: 5.5 kW Vertical spindle motor power (each): 11 kW Top horizontal spindle motor power: 9 kW Spindle speed: 6000 rpm Spindle diameter: 40 mm Vertical spindle length: 140 mm Horizontal spindle length: 250 mm Axial adjustment of vertical spindles in relation to worktable: 40 mm Axial adjustment of horizontal spindles in relation to right fence: 40 mm Min./max. tool diameter on jointer: 120 – 140 mm Min./max. tool diameter on vertical spindles: 100 – 180 mm Max. profile height on vertical spindle: 40 mm Min./max. tool diameter on top spindle: 125 (100-180) mm Feed roller shaft diameter: 140 mm Infeed table length: 2000 mm Quick adjustment of infeed table and fence: 10 mm Manual lubrication pump for table STD

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 42 A, skupna višina: 1.800 mm, skupna dolžina: 4.800 mm, skupna širina: 1.000 mm, Oprema: CE označba, TEHNIČNI PODATKI Število enot: 9 1. enota: Enota za predrezkanje Orodja vključena 2. enota: Enota za lepljenje 3. enota: Pritiskalni valji Orodja vključena 4. enota: Enota za kapiranje Orodja vključena 5. enota: Enota za zaobljenje robov Lodpfx Abjyux Rij Tsri Orodja vključena 6. enota: Enota za vlečenje radija Orodja vključena 7. enota: Enota za zaobljenje robov Orodja vključena 8. enota: Enota za vlečenje ploskev Orodja vključena 9. enota: Sčetkasta enota Orodja vključena PODROBNOSTI STROJA Napetost: 400 V Tok: 42 A Dimenzije (D x Š x V): 4.800 mm x 1.000 mm x 1.800 mm OPREMA Lepilni lonec

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Ledpjr A Eq Rofx Ab Tjri Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: rabljeno, Leto izdelave: 2018, skupna višina: 2.200 mm, skupna dolžina: 3.540 mm, skupna širina: 900 mm, Price: On request - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AB00007737 - Number of units: 7 - 1st unit type: Pre-milling station - Tools included: Yes - 2nd unit type: Glue application station - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End cutting station - Tools included: Yes - 5th unit type: Rough trimming station - Tools included: Yes - 6th unit type: Flat scraping station - Tools included: Yes - 7th unit type: Brushing station - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 34 - Transport dimensions: 3540mm x 900mm x 2200mm (L x W x H) Lsdpfxsyw Sdco Ab Tori - Number of transport units: 1 Financial Information VAT: The stated price is excluding VAT VAT/refundable VAT: VAT can be deducted for business customers Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Stroj za lepljenje robov SCM Olimpic K560 je bil izdelan leta 2019. Opremljen je z 7" zaslonom na dotik z elektronskim upravljanjem Touch 7, podpira debeline robnih trakov od 0,4 do 3 mm in obdela plošče debeline od 8 do 60 mm. Stroj omogoča podajalno hitrost 12–14 m/min in ima sistem za lepljenje robov s toplim zrakom. Za dodatne informacije nas kontaktirajte. Lrodpfxeyabq Ae Ab Tei • Stanje stroja: dobro ohranjeno • 7" zaslon na dotik (16:9) z elektronskim upravljanjem Touch 7 • Debelina robnega traku: 0,4 – 3 mm • Debelina plošče: 8 – 60 mm • Minimalna dolžina plošče: 140 mm • Minimalna širina plošče: 100 mm • Podajalna hitrost: 12 – 14 m/min • Sistem za lepljenje robov s toplim zrakom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, This SCM DMC sd60 wide belt sander was manufactured in 2018. It features a working width of 1,100 mm and processes materials with heights ranging from 4 to 170 mm. Equipped with a powerful 15 kW main motor, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic control for precise operation. Take advantage of this opportunity to acquire the SCM DMC sd60 wide belt sander. Contact us for further information. Machine Advantages Technical Machine Specifications • Working width: 1,100 mm • Min./max. working height: 4 - 170 mm • Sanding belt dimensions: 1,115 x 2,150 mm • Feed speed: 4.5 / 9 m/min • Main motor: 15 kW (20 hp) Lrjdpfx Absx Nr Sds Toi Additional Information Control Unit - Electronic ammeter for main motor to display current consumption - Electronic display for working height - Electronically controlled sanding belt - Electrically adjustable working height - Logic 50 K electronic programmer - LOGIC SC electronic programmer with LCD display, featuring dual-row, dust-protected membrane keys and integrated LED indicators Workpiece Handling - Rubber pressure rollers - Infeed anti-kickback protection - Rubber feed belt - Roller table with two rollers at both the infeed and outfeed of the worktable - Pneumatic activation/deactivation of roller #1 - Pneumatic activation/deactivation of roller #2 - TES elastic-joint sanding pad - Pneumatic activation/deactivation of sanding pad unit Tooling - "R" unit with roller - "CS" combination unit with roller/sanding shoe - Rubber-coated calibration roller - Sanding roller with rubber coating - Hard sanding pad - "RA" diagonally ribbed steel contact roller in the first unit

Stanje: skoraj kot novo (rabljeno), premer vretena 35 mm ročno dviganje in spuščanje vretena z odčitkom nastavljiva hitrost vretena: 3000/4500/6000/8000/10000 vrt/min stranski voziček za čepovanje tri-valjni podajalec MAGGI CE oznaka Ljdpoytf Hhsfx Ab Teri leto izdelave 2008 teža 525 kg

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oblepilka SCM K560HP - leto 2020. POPOLNI SERVO POGONI Servisirana pri pooblaščenem servisu SCM Popolnoma delujoča, stalno v uporabi. Načrtovana demontaža stroja: januar/februar 2026 Celoten opis funkcij na priloženih fotografijah Lsdpfx Abjxn T Sge Tsri Možnost ogleda in preizkusa na kraju samem.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 9.974 h, skupna višina: 2.700 mm, skupna dolžina: 7.700 mm, skupna širina: 2.420 mm, Net weight: 7,390 kg CNC Machining Center SCM Morbidelli M-600 5-axis machine Year of manufacture: 2012 Machine No.: AA2/002032 Working area X-axis: 5020 mm Working area Y-axis: 1680 mm Working area Z-axis: 250 mm Tool positions: 36 Vertical drilling spindles: 24 Software: SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity: 250 m³/h Disassembled for transport Weight: 7,450 kg Lodswnhccspfx Ab Tjri - Special features: - Note: Machine reports spindle error - Year of manufacture: 2012 - Documentation available: No - CE mark present: Yes - CE certificate available: No - Serial number: AA2/002032 - Operating hours: 9,974 - Number of milling spindles [pcs]: 1 - Milling spindle 1: - Number of controlled axes [pcs]: 5 - Type of router table: beam table - Drilling tools available: Yes - Horizontal drilling spindles [pcs]: 6 - Vertical drilling spindles [pcs]: 24 - Saw unit available: Yes - Tool changer positions [pcs]: 36 - System/Software: SCM Maestro - Vacuum pump included: Yes - Quantity [pcs]: 1 - Brand: Becker - Capacity [m³/h]: 250 - CNC options: waste conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Working range Z [mm]: 250 - Transport dimensions: 7700 mm x 2420 mm x 2700 mm (L x W x H) - Transport weight [kg]: 7,390 kg - Transport packages [pcs]: 1 Financial information VAT: The stated price is plus VAT VAT/Taxation: VAT recoverable for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rabljeni robni lepilni stroj SCM Ljdpfx Aoyrr Naeb Tjri - Model: Olimpic K360 T-ER1 - Zelo dobro stanje. - Takoj na voljo - Video na zahtevo - Leto izdelave 2016 - Vrhunska oprema (2 dodatna lepilna rezervoarja)

Stanje: dober (rabljeno), Leto izdelave: 2021, Rabljeni robni lepilni stroj SCM Olimpic K360 Lrjdeyrrpmspfx Ab Tsi - 11 m/min - debelina plošče: 8 - 60 mm - robovi: 0,4 - 6 mm - dolžina stroja pribl. 4.200 mm - teža pribl. 1.200 kg - takoj na voljo - malo delovnih ur/metrov (glej fotografijo) Za dodatna vprašanja nas kontaktirajte.

Stanje: rabljeno, številka stroja/vozila: 008390, Tip pritrjene obrobe: tanka obroba, močna obroba, masiven les Leplilni sistem: EVA Lrjdeygtbyjpfx Ab Tsi Spojnično rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 18 m/min Največja debelina plošče: 60 mm Delovni agregati: 7 kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, dolžina brusnega traku: 2.150 mm, vhodni tok: 39 A, Širokopasovna brusilka SCM namenjena za kalibracijo masivnega lesa, brušenje masivnega lesa, furnirja in lakiranih temeljev. Model: Sandya 600 RCS Delovna širina: 1.100 mm Delovna debelina: 4-170 mm Glavni motor: 15 kW s frekvenčnim pretvornikom Hitrost brusnih trakov: 3-16 m/s (frekvenčni pretvornik) Hitrost podajanja: 3-18 m/min (frekvenčni pretvornik) Dolžina brusnih trakov: 2.150 mm Agregati: 1. Kalibracijski valj iz jekla R (premer 140 mm) 2. Kombinirana enota CS: - gumirani valj (premer 160 mm, trdota 30Sh) Lrjdpfx Abeygddle Tji - elektronska segmentna noga (širina segmentov 30 mm) 3. Brusilni valj Scotch-Brite (premer 150 mm) Dodatna oprema: - 5 podpornih valjev na vstopu - 5 podpornih valjev (1 valj je poganjan) na izstopu - komplet C-Plus - pnevmatski izklop 1. valja - pnevmatski izklop 2. valja in segmentne noge - elektronski programator LOGIC TS z 10.4" zaslonom na dotik - motorizirana nastavitev debeline (prikaz na zaslonu) Stanje stroja: zelo dobro Leto izdelave: 2016 Teža: 1.400 kg Električni priključek: In=39A Dostopnost stroja: približno april 2026

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Leto izdelave 2016 Upravljanje na dotik s barvnim zaslonom Antiadhezivna tekočina Agregat za predhodno rezkanje Lrjdpfx Aeyg H Aqjb Tei Zaobljenje robov pri 2 agregatih Ravna in radialna strgala Avtomatsko upravljanje položaja rezkalnih agregatov zgoraj/spodaj, na vogalih in profilne strgala Polirni stroji Teža 1754 kg Dolžina stroja 4,8 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 336 h, največja debelina roba: 8 mm, skupna dolžina: 4.764 mm, skupna masa: 1.840 kg, model krmilnika: Maestro Pro Edge, Stroj na lemovanie hrán s iba 336 prevádzkovými hodinami a rozsiahlym príslušenstvom! TECHNICKÉ ÚDAJE Max. hrúbka hrany: 8 mm Ledpfxsydc Abe Ab Tori INFORMÁCIE O STROJI Ovládanie: Maestro Pro Edge Elektrické údaje Napätie: 400 Volt Frekvencia: 50 Hz Rozmery a hmotnosť Dĺžka stroja: 4 764 mm Hmotnosť cca: 1 840 kg Prevádzkové hodiny: 336 h Konfigurácia stroja na lemovanie hrán: Jednotka na zarovnávanie a strúhanie - rádius: 1 mm Jednotka na zarovnávanie a strúhanie - rádius: 2 mm Striekacie zariadenie na konečnú úpravu hrán Striekacie zariadenie na citlivé hrany Plošný škrabák "RC-V" Kefa "SP-V" Kit "SAVENERGY" Zariadenie "EASY SIZE" Vnútorné osvetlenie kabíny a oblasti lepenia Keramická lampa s infračervenými lúčmi Elektronické nastavovanie prítlačných valčekov Náhradný zásobník na lepidlo "SGP" s NC dávkovaním Dodatočný zásobník na lepidlo "SGP" s NC dávkovaním Manuálne podávanie Snímacie valčeky "Nesting" Diamantové nástroje H=64 pre predfrézovaciu jednotku, 2 zuby Podstavec

Stanje: zelo dobro (rabljeno), 4-sided DOUBLE END PROFILER LINE, currently configured for INTERIOR DOORS, Lrodpfx Abowzmbqj Tsi Consisting of the following machines: X10023A) CELASCHI powered roller conveyor for infeed X10023B) CELASCHI DOUBLE END PROFILER Model TSA 3 B 480 A Installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) X10023D) CELASCHI DOUBLE END PROFILER Model TSA 2 B 360 Installed total power: 65 kW

Stanje: dober (rabljeno), Leto izdelave: 2017, EDGEBANDER WITH DIGITALLY CONTROLLED SETTINGS WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Workpiece height: 8 - 58 mm 10 to 45 mm with corner rounding unit in use - Panel length: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding max 3 mm with corner rounding unit - Edge thickness (strips): max 6 mm without corner rounding max 3 mm with corner rounding unit - Edge width: panel thickness + 2mm each side - Feed speed: 11 m/min - Minimum workpiece gap: 600 mm - Panel overhang (relative to conveyor chain): 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Ø800 mm reel holder - Front workpiece support extension - Easy Size: digital positioning of infeed fence and workpiece passage height - Anti-adhesive spray unit - Edge trimmer (RT-V) 12,000 rpm - Infrared panel pre-heating at infeed Lrsdpferx S Ipjx Ab Toi - Glue unit (VC-VM) with interchangeable gluepot for granules, 1 kg capacity. Heat-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers incl. 1 motorised and timer-controlled roller - Tilting end trimming unit 0-20°, 12,000 rpm - Top/bottom flush trimming unit with digital position adjustment with copying system. 1/4 round (radius 2 mm) or chamfer cutter, 12,000 rpm - Corner rounding aggregate R2mm, 12,000 rpm with digital positioning - Top/bottom radius scrapers R1 & R2 mm with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (nebuliser) OTHER SPECIFICATIONS: - Trimmer motors: 2x2 kW - End trim motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming motors: 2x0.65 kW - CE marking - Lockable mains switch, emergency stop buttons - Main power: 380V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 and 5x Ø80 mm Spindles: 780 m³/h Trimming 360 m³/h Scrapers 2x360 m³/h Max. operational floor space: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and schematics.