Scm Windor 1 nakup rabljenega (600)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA Gujdsr A Eq Rjpfx Aa Uoc The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Max. chip removal 5 mm Total surfacing table length 2200 mm Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Including the following options: Gujdpfx Aedvn Hwoa Uoc • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Gedpfx Aaeiiynnj Ujuc Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards Godpjd Supgefx Aa Uouc TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Electric Heated Platen Press SCM Gedpsfh Tmmofx Aa Ujuc Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Godotwzyfopfx Aa Ujuc Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Technical data: Working width mm: 1,350 Gsdpfx Aehtuvrsa Ueuc Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. Gsdpfxecuwpts Aa Ujuc • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2008, Rabljeni stroj Leto izdelave: 2008 Stanje: trenutno še v proizvodnji Oprema in tehnični podatki: Lepljenje max. 8–55 mm Vklj. z vrtljivim upravljalnim pultom Gujdpfx Aajw Nadgj Uoc HF-spojni agregat z dvema motorjema Vklj. z izmenljivim hitrogrelnim bazenom, teflonsko prevlečenim Vklj. z elektronskim pozicioniranjem pritisnih valjev Vklj. z nagibnim dvojnim čelilnim agregatom Vklj. z izravnalnim rezkalnim agregatom Vklj. z agregatom za posnemanje posnetja, radija in vogalov z nesting paketom Vklj. z radijskim vlečnim nožem z nesting paketom Vklj. z ravninskim vlečnim nožem Vklj. z utornim agregatom Vklj. z polirnim agregatom Vklj. z razpršilno enoto Razpoložljivost: kmalu Skladišče: Flörsheim

Stanje: dober (rabljeno), Koda: 0292 Znamka: SCM MINIMAX Model: FORMULA F1 - CE standard Skobeljni stroj za obdelavo lesa, plastike, kompozitnih materialov in drugih – CE standard Guodpfx Aaeyhp S Ro Uec Tehnični podatki: Delovna širina: 410 mm Dolžina mize: 2610 mm Število nožev: 4 Premer vretena: 120 mm Hitrost vrtenja vretena: 5000 rpm Vodilo nastavljivo od 90° do 45° Največji odvzem na prehod: 8 mm Moč motorja: 5,5 KM Višina mize od tal: 845 mm Premer priključka za odsesavanje: 120 mm Skupne dimenzije: 2610 x 900 x 1070 mm (višina) Teža: 575 kg

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje: X=2970 mm / Y=1725 mm. Hitrosti pomika osi: X=60, Y=45, Z=25 m/min. Teža: 3200 kg. Lokacija skladišča: Nattheim. Gjdpfow Dcccjx Aa Ueuc

Stanje: rabljeno, Leto izdelave: 2007, Pomik osi: X=4400 mm, Y=2195 mm, Z=440 mm Delovno polje v X=3650 mm, Y=1560 mm Prehodnost: 330 mm Elektrovreteno SCM Power 2000 Visokohitrostno rezkalno vreteno z močjo 13 kW Rotacijska os Vector (C-os) Ventilator za čiščenje orodja na rezkalni enoti Vpenjanje orodja HSK 63 F Hitrost vrtenja 600 – 24.000 1/min brezstopenjsko preko inverterja Moč motorja 8,5 kW Nosilci orodja: 6 kos Menjalnik orodja: Rapid 12 (12 mest) Vakuumska črpalka 250 m³/h / 5,5 kW Maks. vakuum: 0,9 bar Referenčni prisloni na straneh mize Vrtalni agregat z 11 vreteni (7 vertikalnih / 4 horizontalni) Krmiljenje: NUM serija 1000 Uporabniški vmesnik: XILOG Plus PC Office Hardware WINDOWS XP Professional Skupna priključna moč: max. 27,5 kW Teža: 5200 kg Skladišče: Nattheim Godpfxew Dcb Se Aa Ujuc

Stanje: dober (rabljeno), Moč motorja 3 kW Guedpfx Aaoza Htpj Ujc Širina brušenja 150 mm Teža 490 kg Robna brusilka SCM Samco tip Unilev 15 za brušenje ravnih robov, poševnin in profiliranih obdelovancev iz lesa in lesnih materialov. Robustna konstrukcija in nihajna brusilna enota omogočata natančne rezultate brušenja pri najrazličnejših aplikacijah. Idealna za proizvodnjo pohištva, notranje oblikovanje in obrtne proizvodne obrate.

Stanje: rabljeno, Leto izdelave: 2011, Obdelovalna velikost v X-smeri: 2770 mm Obdelovalna velikost v Y-smeri: 1220 mm Obdelovalna debelina (Z-mera): 80 mm Zasnova stroja: portalni stroj Moč glavnega vretena: 11,0 kW Hitrost glavnega vretena: 1500 - 24.000 obr/min Vektorsko vodeno vreteno: Da Vpenjalni sistem: HSK 63 F Hlajenje vretena: zračno hlajenje Guedpfovvi Htex Aa Uoc Število osi: 3 Menjalec orodij: Da, kos Število mest za menjavo orodij: 10 kos Pisalniška tipkovnica: Da Miška: Da Programski sistem: Xilog Plus DXF vmesnik: Da Možna spletna povezava: Da CD-ROM pogon: Da Izvedba mize: rešetkasta miza Ustavljalni sistem: ustavljalni valj Število vakuumskih črpalk: 1 Moč vakuumske črpalke: 250 m³/h Zavarovanje: varnostne pohodljive preproge Lokacija skladišča: Sonnefeld

Stanje: rabljeno, Leto izdelave: 2019, including tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center comes with a comprehensive array of milling and drilling tools to meet any woodworking requirement. - Highly efficient: equipped with drilling spindles running at 8,000 rpm and the industry's most robust spindle technology, offering over 1,000 maintenance-free operating hours. - Optimal and completely equipped: the suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be tailored precisely to your needs. - Easy and intuitive programming thanks to integrated Cad-Cam MAESTRO CNC software. - User-friendly operation: the lowered machine frame provides easy access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed. In the PRO SPACE version, no additional protective infrastructure is required. Supporting structure The supporting frame is made from an exceptionally sturdy, monolithic steel base, heavily ribbed and extremely robust. The extra-wide support surface is specially designed to give the machine maximum stability and to ensure constant precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry. The machining unit is equipped with a balanced, stable, and highly durable support structure that withstands heavy loads, guaranteeing top-tier performance and superior accuracy. The moving gantry is made from a single, solid piece, anchored to the base, and runs on premium prismatic rails with ball-bearing carriages. The machining unit is attached to this and moves in the Y and Z axes, also on prismatic rails with ball-bearing carriages. The movement of the lower mobile unit (X axis) and the machining unit along the gantry (Y axis) is ensured by a rack-and-pinion drive with helical gears, resulting in greater tooth engagement for increased acceleration and higher speeds along the X and Y axes. The specially designed helical gearing reduces wear on mechanical parts and enables quieter operation. The vertical Z-axis is driven by a ball screw, which ensures perfect balance under dynamic load, as well as high acceleration and deceleration speeds. The main milling unit is directly coupled to the Z-axis carriage, providing extremely fine processing quality by eliminating vibrations. The X-Y-Z axis movements are driven by brushless motors powered by static inverters, which provide: - Shorter machining times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders Gjdpfevvi Scjx Aa Ueuc - No setup required upon machine start-up due to absolute encoders - Elimination of general maintenance work as the brushless system has no brushes The control and management of all axes and working elements is handled via e

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.100 mm, moč: 11 kW (14,96 KM), vrsta nastavitve višine: električni, Prenovljen avtomatski širokopasovni kalibracijski brusilni stroj je namenjen za kalibracijo masivnega lesa in brušenje furniranih kosov. Model SANDYA 10 spada v višji razred avtomatskih širokopasovnih brusilk znamke SCM, ki se odlikuje po izjemno togi konstrukciji, vrhunski kakovosti brušenja in univerzalni uporabi. 2 agregata: valj + valj z blazinico in skupnim motorjem 11 kW 1. kalibracijski valj iz jekla 2. brusilni valj iz mehke gume + pnevmatska brusilna blazinica Širina brušenja 1100 mm Guedpfx Aaowx I Tpo Usc 2 hitrosti pomika podajalnega traku Samodejno merjenje debeline obdelovanca Motorizirana nastavitev delovne debeline s prikazom + fino uravnavanje Podaljšani mizi na vhodu in izhodu Pnevmatska oscilacija Zelo dobro tehnično stanje + popolnoma prenovljen Slovenska navodila priložena CE varnostni standard Primerna za kalibracijo in brušenje masive ter furnirja ODLIČNO TEHNIČNO STANJE Stroj je prenovljen, nastavljen in preizkušen.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Spodnji vretenasti rezkar SCM T130 Gsdjzakgmjpfx Aa Usuc Premer vretena: 35 mm Skupna dolžina vretena: 160 mm Glavni motor z močjo 5,5 kW Hitrosti vrtenja z menjavo jermena: 3000/4500/6000/7000/10000 o/min Vreteno se vrti levo in desno Električno dviganje vretena

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Ponujamo kot novo obdelovalno središče SCM morbidelli cx110, letnik 2025, z le 340 delovnimi urami. Gusdpfxoy Hf H Ne Aa Uoc Proizvajalec: SCM Model: morbidelli cx110 Leto izdelave: 2025 Stanje: kot novo ID kategorije: 2075 ID tipa: 970 Tip: obdelovalni center Cena: 59.990€ Delovne ure: 340h Če imate vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, številka stroja/vozila: AB00007338, Funkcionalnost: popolnoma funkcionalen, moč: 3,5 kW (4,76 KM), vhodni tok: 8 A, vhodna frekvenca: 50 Hz, višina obdelovanca (maks.): 84 mm, skupna masa: 177 kg, SCM Minimax E10 ročna oblepljivačica rubova proizvedena od strane SCM Group (Italija). Stroj je namijenjen za oblaganje rubova ravnih i zakrivljenih ploča koristeći ABS, PVC i melaminske trake za rubove. Idealan je za izradu namještaja po mjeri, recepcijskih pultova, šankova, zakrivljenih komponenti i za unutarnje montaže. Stroj je u vrlo dobrom stanju, potpuno ispravan i spreman za trenutni rad. Specifikacije: Godpfsy Uwq Nox Aa Ujuc Proizvođač: SCM Group Model: Minimax E10 Godina: 2018. Napajanje: 400V / 3 faze Upravljanje nožnom pedalom Sustav zagrijanog lonca za ljepilo Valjak za nanošenje ljepila Pogodno za ravne i zakrivljene ploče Mobilna ruka za potporu trake za rubove Kompaktna industrijska konstrukcija Jednostavno rukovanje i podešavanje Tehnički podaci: Debljina trake: 0,4 – 3 mm Visina trake: 10 – 84 mm Debljina ploče: 8 – 80 mm Minimalni unutarnji radijus: cca. 25 mm Brzina pomaka: 4 / 8 m/min Instalirana snaga: cca. 3,5 kW Stroj je moguće pogledati i isprobati pod naponom.

Stanje: zelo dobro (rabljeno), Spodnja vretenasta rezkalka SCM T150 Premer vretena: 35 mm Skupna dolžina vretena: 180 mm Električni dvig vretena Električni pomik vodila Električno nastavljiv kot -10/45° Guodjw Ral Hjpfx Aa Ujc Spremenljiva hitrost vretena: 3000-4500-6000–7000-10000 vrt/min Moč motorja: 5,5 kW Tehnična dokumentacija DTR

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, premer vretena: 30 mm, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, vrsta nastavitve višine: električni, dolžina vretena za rezkanje: 140 mm, Spodnji vretenasti rezkar SCM T130E Premer vretena: 30 mm Gjdpfx Aaoxzyltj Ujuc Dolžina vretena: 140 mm Spremenljiva hitrost vretena: 3000/4500/6000/7000/10000 obr/min Moč glavnega motorja: 7,5 kW Elektronska nastavitev višine vretena preko stikala 4-valjni podajalnik Regulacija hitrosti podajanja z variatorjem CE certifikat Tehnična dokumentacija (DTR)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širokopasovni brusilni stroj SCM Sandya 10 Delovna širina: 1100 mm Delovna višina: 3–160 mm Število brusilnih agregatov: 2 1. Kalibracijski valj 2. Kombiniran agregat s čeveljčkom Gjdpeyuclwjfx Aa Usuc CE certifikat Glavni motor z močjo 11 kW

Stanje: zelo dobro (rabljeno), SCM Machining Center Godewmxkuopfx Aa Usuc

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 8021 TEHNIČNI PODATKI - maksimalna širina obdelovanca: 1100 mm - maksimalna višina obdelovanca: 150 mm 2 agregata: 1) gumirani rebrasti valj za kalibracijo 2) gumirani rebrasti valj - moč motorja: 11 kW - zavora - zgoraj: - kovinska drsna razdeljena valjčna rola - pritisna enota - agregat - pritisna enota - agregat - pritisna enota - čistilna krtača Godozdfnyjpfx Aa Ujuc - spodaj: - 2 kovinska drsna valjčka - pogonski trak - 2 kovinska izhodna drsna valjčka - nov transportni trak - pnevmatska oscilacija trakov - električno dviganje mize - brezstopenjska regulacija podajalne hitrosti - podajalni motor: 1,5 kW - potenciometer za nastavitev debeline brušenja - delovni tlak: 8–10 bar - premer odsesovalnega priključka: 3×165 mm, 1×140 mm - skupne dimenzije (d/š/v): 1870×1850×2210 mm - teža: 2165 kg PREDNOSTI – italijanska proizvodnja, znamka SCM – nov transportni trak – 2 agregata – potenciometer za nastavitev debeline brušenja – brez ponovnega barvanja – rabljeni brusilni stroj v zelo dobrem stanju Neto cena: 26.900 PLN Neto cena: 6.405 EUR glede na tečaj 4,20 EUR (Cene se lahko spremenijo glede na večje spremembe tečaja)

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Godpehkz E Tofx Aa Ujuc Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale