Scm S 630 nakup rabljenega (589)

Stanje: delavnici obnovljeno (rabljeno), Priključna moč 380V 13A, pogonski motor 5,5kW + podajalni motor 0,7kW, širina skobljanja 630 mm, gred Tersa s 4 noži, brezstopenjski podajalni pomik 6-18 m/min, stikalo zvezda-trikot, mehanska nastavitev višine mize s pomočjo ročne ročice – pogon preko nožne gredi, fino nastavljanje z ročnim kolesom, mehanski digitalni prikaz višine oblanja, 1x mizni valj, priključek za odsesavanje 160 mm, 1x jekleni podajalni valj, 1x jekleni izstopni valj. Iedpfexdl U Esx Ah Djtn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, We offer for sale a wide belt sander SANDYA 16-S RRCS 1350. The machine is fully operational and has seen little use. It has served as an auxiliary machine for special projects. STANDARD EQUIPMENT: * Control panel * Electric adjustment of working height * Digital readout of working thickness * Conveyor belt made of natural rubber * Automatic centering and tensioning of conveyor belt * Movable rubber pressure rollers before and after the sanding units * Flexible steel pressure bar before the first sanding unit * 2 roller supports with 2 non-driven rollers at machine infeed and outfeed * Electronic oscillation of sanding belt * Extraction ports designed to minimize air consumption * "Hand protection" emergency device at workpiece entry * Safety switches at the front and rear of the machine * Lockable main switch * Automatic "star-delta" switch for main motor * Main motor overload protection * Automatic brake for immediate shutdown of sanding units * Automatic emergency shut-off in case of: - Sanding belt breakage - Lack of sanding belt tension - Lateral deviation of sanding belt Itjdpjwq Efmofx Ah Den - Lack of compressed air - Main motor overload * Electric motors with IP54 insulation class TECHNICAL DATA: - Working width: 1,350 mm - Min./max. working thickness: 3–170 mm - Sanding belt width: 1,375 mm - Sanding belt length: 2,620 mm Machine configuration: - B/23: Reading bar for sectional pads with 23 sections FIRST UNIT "R": - Steel calibrating roller, diameter 200 mm, 18/5 kW - Pneumatic On/Off selector for first roller, actuated by pneumatic cylinder, including micrometric adjustment according to sanding belt thickness - Oscillating blower for cleaning sanding belt of the first unit, including: • Electronic positioning • Timed activation synchronized with workpiece presence • Extraction port, filter, and pressure regulation SECOND UNIT "R": - 250 mm diameter roller, 55SH rubber sanding roller, 15 kW - Pneumatic On/Off selector for second roller, actuated by pneumatic cylinder, with micrometric adjustment - Reverse motion of second unit THIRD UNIT "CS": - Sanding roller, diameter 175 mm - Electronic sectional pad on third unit with LOGIC TS electronic programmer • Distance between sections: 60 mm • Working pressure adjustment - Pneumatic On/Off selector for third roller Roller supports at infeed and outfeed for long workpieces Fixed cleaning unit at outfeed Electronic positioning of the working table The machine was purchased new from an authorized SCM Polska dealer and has been serviced exclusively by SCM's authorized service. Last calibration performed: 16-01-2025. Machine available from mid-July. Working hours: 589h.

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm Itodpfxew Tfybe Ah Djn - Minimum: 3.5 mm Max. cutting depth per pass: 8 mm Minimum workpiece length: 260 mm Cutterblock diameter: 120 mm 4 knives: 35x3x640 mm Cutterblock speed: 4500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction port diameter: 150 mm Standard Equipment and Accessories - Automatic thicknessing table lift with 2 speeds, including micrometric positioning - Thicknessing table with vertical movement via 4 steel lead screws - Electronic 2-axis control for the setting of: * programmed thicknessing table position * feed speed - Infinitely variable electronic feed speed from 4 to 20 m/min via inverter - Feed speed adjustment based on maximum main motor power consumption - Ribbed steel infeed roller - Two upper rubber-coated outfeed feed rollers - Interchangeable feed rollers - Independent pneumatic pressure regulation for upper feed rollers - Motor power 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta start: * S1] 7.5 kW / 10 HP 50 Hz (8.8 kW / 12 HP 60 Hz) * [S6 -40%] 9 kW / 12 HP 50 Hz (11 kW / 15 HP 60 Hz) Safety/Protection - Noise reducing guards at infeed and outfeed - Micro safety switch on the guard cover - Emergency stop switches at the front and rear of the machine - Lockable main switch - Motor protection circuit breaker - Low voltage control circuit (110 Volt) - Automatic motor brake - C.E. Declaration of Conformity Production code: S 7 109999 Standard safety regulations 530314 TERSA – cutterblock (monoblock version) with disposable reversible cutters 083201 Stand 930731 Voltage 400 V EU R02017 L'invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short term Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), working width 900 mm steel calibration roller combi aggregate with rubber roller motor power 11 kW pneumatic shoe shot-blasting automatic pneumatic oscillation via photo sensor workpiece thickness gauge electric table adjustment star/delta start-up power supply 380 V Itedpfxow Dqy Ns Ah Dsn

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 520 mm, vrsta nastavitve višine: električni, število rezil: 4, vhodna napetost: 400 V, višina obdelovanca (maks.): 250 mm, število podajalnih valjev: 2, Oprema: motorna zavora, - 4 noži - največja širina skobljanja 520 mm - največja vhodna debelina 250 mm Itedpfx Aow Tthgjh Don - 4 stopnje hitrosti - električno nastavljanje debeline Stroj je v dobrem stanju, pripravljen za uporabo.

Stanje: dober (rabljeno), Leto izdelave: 2011, Naprodaj je rabljeni SMC robni lepilni stroj iz prve roke v dobrem stanju. Proizvajalec: SMC Leto izdelave: 2011 Tip: Olimpic S 2000 "Model A" Teža: 2000 kg Podajalna hitrost: 12-18 m/min Delovna višina (debelina plošče): 8-60 mm Debelina roba: 0,4 mm - 6 mm - Enota za poravnalno rezkanje - Enota za čelno rezanje - Površinski strgalnik - Enota za zaobljenje Vse navedene informacije so brez garancije, prodaja samo pravnim osebam. Ogled možen po dogovoru na naslovu Karlovarská 1415, 363 01 Ostrov, Češka. Prevzem v Ostrovu (Češka) ali 94424 Arnstorf (Nemčija) Itjdpfx Aohf Acljh Den

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Itodpfxotwzyfo Ah Don Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as-new machine with 6 spindles and beveling unit Itodpfx Aowy Hifsh Djn further technical details available on request

Stanje: zelo dobro (rabljeno), Wide Belt Sander SCM Sandya 3 Working width: 950 mm Itsdpfewn H Tgex Ah Den Number of sanding units: 2 1st unit: steel roller 2nd unit: combination – rubber roller + sanding pad Pad automatically engaged Oscillation with photocell sensors Two feed belt speeds Feed speed: 4.5 / 9 m/min Motor power: 7.5 kW Abrasive belt size: 1900 × 970 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A Morbidelli CNC machining center with drilling and milling functions is available. Working area X/Y/Z: 4255mm/1465mm/280mm, travel range X/Y/Z: 3600mm/1300mm/280mm, traverse speed X/Y: 40m/min/45m/min, table dimensions X/Y: 3600mm/1300mm, spindle power: 11kW, speed: 18,000 rpm, tool holder: HSK 63, tool stations: 12, drilling spindles horizontal/vertical: 6/12, machine dimensions X/Y/Z: 4000mm/1700mm/2500mm, weight: 4,000kg. Documentation available. Inspection on site possible. Itedpfowi Tngjx Ah Djn

Stanje: rabljeno, številka stroja/vozila: 006416, Working area X-axis: 4320 mm Working area Y-axis: 2155 mm Working table type: Nesting table Main spindle power: 9.5 kW Number of controlled axes: 3 axes Itjdpfx Ahsrtuqro Dsn Number of drilling spindles: 12 Number of tool positions: 13

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, delovna širina: 1.100 mm, moč: 15 kW (20,39 KM), Širokopasovni brusilnik v dobrem stanju. Opremljen z valjem in kombiniranim valjem. Učinkovit tudi pri brušenju na preprogi, idealen za brušenje manjših predmetov. Širina brušenja: 1100 mm. Prevoz po celotni Evropi je mogoče organizirati po ugodni ceni. Iodpfx Ajxmfhdeh Detn

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! Itsdpfxeitvkuj Ah Den AVAILABLE IMMEDIATELY!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer vretena: 30 mm, – Italijanska proizvodnja – CE oznaka – Dolgi delovni pulti TEHNIČNI PARAMETRI: – Premer vretena: 30 mm – Višina vretena: 150 mm – Največji premer orodja: 350 mm – Pet vrst hitrosti vrtenja: 3000 / 4500 / 6000 / 7000 / 10.000 obr/min – Nastavitev višine – Električna zavora – Moč motorja: 5,5 kW – Dimenzije mize: 730 x 1200 mm Iedpfew Ip R Hox Ah Djtn – Dve pomožni mizi: 410 x 670 mm – Višina mize od podnožja: 925 mm – Premer izhoda: 2 x 120 mm – Dimenzije stroja (d/š/v): 261 / 100 / 120 cm – Teža: 800 kg

Stanje: zelo dobro (rabljeno), SCM Sandya Uno CS wide belt sander Working width: 900 mm Working height: 3–160 mm Itedewic H Sjpfx Ah Djn Number of sanding units: 1 Sanding unit configuration: COMBI (steel roller + pad) Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930 × 1525 mm Weight: 830 kg

Stanje: rabljeno, Leto izdelave: 1992, used Make: SCM Model: Compact 220 S Year of manufacture: 1992 Machine no.: 110830 GS-certified for wood dust Number of spindles: 4 Spindle arrangement: bottom-top-right-left Motors: 4 / 5.5 / 4 kW Planing width: approx. 220 mm Planing height: approx. 120 mm Itodpfx Ajw En H Noh Djn Spindle diameter: 40 mm Table length: approx. 2500 mm Knife system: Tersa 230/125 Pre-cutting cutter Pneumatic pressure rollers Infeed ahead of the jointer Feed speed: 5–20 m/min Profiling Sliding rollers Extraction connection: 4 x 120 mm Required space: approx. 3000 mm x 1400 mm x 1600 mm Weight: approx. 1500 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-is condition, as inspected, without guarantee or warranty

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Working width: 1100 mm Motor: 11 kW 2 units First unit: steel calibrating roller Itjdpfx Ahsw Dq Ers Den Infinitely variable feed speed adjustment Second unit with rubber roller and pneumatically actuated pad Pneumatic oscillation with photoelectric sensors Machine functions activated from control panel Automatic material thickness gauge Vacuum table New conveyor belt Year of manufacture: 2001 Weight: 1206 kg Width: 150 cm, length: 200 cm, height: 200 cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, For sale: As-new SCM M3 single-shaft multi-blade rip saw. Isdpfxjwff Nns Ah Dstn Motor power: 18.5 kW Cutting width: 300 mm Cutting height: 120 mm Optionally available with a 37 kW motor upon request.

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 – 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 15.0 with inverter Feed speed variable m/min: 3.5 – 18 Working units: 1st unit: "RA" diagonally grooved steel contact roller, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments C version: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/pad unit - Sector activation via electronic control, synchronizing engagement with the feed speed and regulating the number of segments based on workpiece geometry, enabling selection of more or fewer sectors on the left and right sides of the workpiece. - Versions 135: Itsdpfshtuvrex Ah Den “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing bar at the infeed Additional features: Roller table in infeed and outfeed for long workpieces Perforated table and feed belt Vacuum table with integrated 4 kW (5.5 HP) electric fan in the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S software integration’ ATTENTION: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thickness planer machines model SCM S 520 Used machine CE marking: Yes Condition: Excellent Technical specifications: Working width mm: 520 Maximum (minimum) working height mm: 250 (3) Maximum cutting depth mm: 8 Number of feed speeds m/min: 5 / 8 / 12 / 18 Iedeu Ecqzspfx Ah Detn Motorized table positioning Number of knives: 4 Main motor power HP: 7.5 Voltage: 380/50

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), USED AUTOMATIC FRONT-LOADING PANEL SAW Brand: SCM Model: SIGMA IMPACT year: 2006 CE compliant Ijdshkr A Sepfx Ah Dstn Max. cutting dimensions: 3200 x 3200 mm Cutting height: 67 mm 3 long and 2 shorter wide air tables 6 pneumatic clamps Main saw motor: 10 HP Scorer unit PC with WINCUT software

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Device Description Iodpew Dq Dbsfx Ah Detn working width: 950 mm calibration unit with a steel roller combination unit with a rubber roller and a sanding pad sanding pad pneumatically actuated star-delta starter pneumatic oscillation controlled by photocells two feed speeds for the conveyor motor power: 11 kW year of manufacture: 2001 power supply: 400V weight: 975 kg

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel Iodpfodibw Asx Ah Dotn - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Work table dimensions: 600 x 520 mm Work table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: zelo dobro (rabljeno), working width 230 mm working height 120 mm 5 heads head configuration: bottom/right/left/top/universal heads adjustable on two axes pneumatic pressure rollers variable feed speed adjustment spindle diameter 40 mm star/delta start bed lubrication weight 2245 kg year 1997 Iedpfx Aow Afdgjh Djtn