Scm Minimax Me 35 nakup rabljenega (599)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, SCM Wide Belt Calibration and Fine Finishing Sander Model: dmc sd 60 RCS 135 Technical Specifications: - Working width: 1,100 mm - Min./max. working height: 4–170 mm - Sanding belt width: 1,120 mm - Sanding belt length: 2,150 mm - Main motor power: 11 (15) kW (HP) - Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) - Feed speed: 4.5/9 m/min Standard Equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore – 1st station - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore – 2nd station - Hard sanding pad with manual working height adjustment - Motor power for first unit: 11 kW (15 HP) Ncodpfx Adetwqn Sovjp - Electronic ammeter for the main motor to display current consumption - Electronic display for working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kick-back protection at infeed ahead of the first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at both the infeed and outfeed of the work table - Conveyor feed with two speeds: 4.5 / 9 m/min via gear motor - Automatic belt centering Includes the following special equipment: - 1x version "B" for RCS with: pneumatic on/off control for roller on 1st unit "R" + pneumatic on/off control for roller on 2nd unit "CS" + "MESAR" elastic segmented sanding pad + pneumatic on/off control for the sanding pad unit + electronic programming unit "LOGIC 50" + electronic working height adjustment - 1x CE safety specifications - 1x roller table at infeed and outfeed for long workpieces, equipped with 5 idler rollers - 1x "RA" helical-ribbed steel contact roller for 1st unit - 1x 15 kW main motor - 1x sanding belt wear optimizer - 1x LED interior lighting - 1x door with viewing window on the rear side - 1x Logic SC control system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 105 h, Sliding table panel saw with movable carriage and saw blade tiltable up to 46°, allowing safe operation and reducing required floor space by 50% compared to a conventional panel saw and pressure beam saw combined. Easy and fast programmed adjustments via the “Ready” control unit from the operator panel. Instant positioning thanks to the rear fence, which is motor-driven and programmable, ensuring quick and precise workpiece positioning. Nedpfx Adjyb T Trsvscp Robust and reliable telescopic fence with measuring scale and two flip stops: cutting of panels up to 2500x3200 mm (optional 3200x3200 mm). The rigid, large-format table ensures optimal support of the panel during processing. Technical data class px 350i Max. sliding table travel mm 2600 3200 3800 Saw blade tilting range dgr 0÷46° Max. saw blade diameter (cutting) mm 350 Max. saw blade diameter (scoring + cutting) mm 300 Max. cutting height (D350) from table at 90°/45° mm 105/72 Max. cutting height (D300) from table at 90°/45° mm 80/50 Saw blade speed rpm 4000 Cutting width, rear fence mm 1300 Other technical features Three-phase motor 7 kW 50 Hz Extraction hood diameter mm 120 (1) - 100 (2) Dimensions mm L 3859 H 1368 Location: ex works customer - available at short notice -

Stanje: zelo dobro (rabljeno), Večnamenski stroj SCM 350, formatirka, debelinka Debelinka: širina 35 cm, maks. višina cca 220 mm, 3 rezila, 1 hitrost podajanja, Poravnalka: širina 35 cm, dolžina miz 180 cm, 3 rezila, Nsdpfx Adsyhdcdjvecp nastavljivo vodilo pod kotom Rezkalni stroj: posodob fi30, vreteno nastavljivo gor-dol in pod kotom 4 hitrosti, stranski voziček, nastavljivo vodilo Žaga: nastavljiva gor-dol in 0-45°, stranski voziček, vodilo na stranskem vozičku, predrezilo, maks. žagin list 300 mm, višina reza pri listu 300 mm - 90 mm Horizontalni vrtalni stroj: miza nastavljiva gor-dol, naprej-nazaj ter levo-desno Stroj ima 3 motorje po 3 kW, napajanje 380V, rabljena naprava v zelo dobrem stanju, pripravljena za delo, robusten večnamenski stroj.

Stanje: zelo dobro (rabljeno), Formatna žaga - panelna žaga SCM class px 350i, dolžina reza 320 cm, nagib agregata 0-45 stopinj, maksimalna velikost lista 350 mm, maksimalna višina reza 105 mm, maksimalna višina reza pri naklonu 72 mm, širina reza na zadnjih vodilih stroja 1300 mm, motor 5,5 kW, hitrost žage - 4000 obr/min, naprava za rezanje pod kotom, Ncjdpfoyf H Tgjx Advop stroj v zelo dobrem stanju, možnost preizkusa pred nakupom.

Leto izdelave: 1980, stanje: potreben popravila (rabljeno), Planing width: 35 cm Maximum planing height: 21 cm Motor missing for the milling machine! The rest is functional Machine requires inspection Ncjdpfx Adjh Tx Awsvep

Stanje: zelo dobro (rabljeno), Width 520 mm Length 264 cm 4 Tersa knives Hydraulic table lift Clean condition, functional Ncodpfjub Uifox Advop You can call or write to us. We speak and write in German and Russian. You can also send us messages in English.

Stanje: rabljeno, Leto izdelave: 2003, Kalibrirno-brusilni stroj SCM SANDYA 20 model 20 M3 135, rabljen leto izdelave: 2003 serijska št.: AE/024903 maksimalna delovna širina: 1350 mm hitrost podajanja: 3,5-18 m/min z inverterjem delovna višina: 4-170 mm vakumska miza: 7,5 kW Sestava: I. grupa: kalibrirni valj iz utorjenega jekla D. 250 – motor 22 kW II. grupa: brusni valj d. 250, trdota 45 SH – motor z dvema hitrostma 9/11 kW vrtljaji 1400/2800 III. grupa: kombinirani valj d. 170, trdota 30 SH + elastična segmentna blazinica s 46 sektorji – motor 11 kW z inverterjem IV. grupa: satinirni valj Scotch-Brite Pozicionirna miza z obdelovancem dimenzija trakov: 2620 x 1370 mm pihala za II. in III. trak samodejno centriranje transporterja Njdpfx Adsxwbydjvscp elektronsko upravljanje I./II./III. valja/blazinice

Stanje: novo, Leto izdelave: 2025, The track links for multi-blade saws are cast from high-quality cast iron or cast steel, which also ensures the high quality of the tracks produced. The links can be additionally equipped with carrier spikes. The track belt components – guides, pins, and bushings – are made from premium materials and undergo thermal and thermochemical treatment. Track feed accuracy is achieved through a specialized hole machining method in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. Njdpewvp Ddjfx Advscp We design and manufacture tracks for multi-blade saws worldwide from manufacturers such as: A.COSTA RAIMANN TOS SVITAVA REMA RESZEL GABIANNI PAUL OGAM and all models of CHINESE TRACKS.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: AH/335516, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 68 A, Oprema: CE označba, TEHNIČNE PODROBNOSTI Nsdpfxsyuylue Advecp 1. Enota: Razpršilna naprava Orodja priložena 2. Enota: Lepilni agregat 3. Enota: Pritrdilni valji Orodja priložena 4. Enota: Kap agregat Orodja priložena 5. Enota: Grobi rezkalni agregat Orodja priložena 6. Enota: Agregat za zaokroževanje robov Orodja priložena 7. Enota: Radijusni vlekalni agregat Orodja priložena 9. Enota: Ploski vlekalni agregat Orodja priložena 10. Enota: Krtačni agregat Orodja priložena PODROBNOSTI O STROJU Napetost: 400 V Poraba toka: 68 A Število transportnih paketov: 2 OPREMA CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, številka stroja/vozila: 3005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.700 mm, pomik osi Y: 1.870 mm, dolžina mize: 3.756 mm, širina mize: 1.892 mm, Oprema: CE označba, TEHNIČNI PODATKI Delovno območje X-os: 3.700 mm Delovno območje Y-os: 1.870 mm Dolžina mize: 3.756 mm Širina mize: 1.892 mm Sistem vpenjanja orodij: HSK-F63 Število mest v menjalniku orodij: 18 kos PODROBNOSTI STROJA Vrtalna glava: F20R Število vrtalnih vreten: 8 navpičnih, 12 vodoravnih Sistem/Programska oprema: SCM Maestro Dimenzije & Teža Dimenzije (D x Š x V): 6.100 mm x 2.600 mm x 2.450 mm Teža stroja: 4.160 kg OPREMA Delovna miza z 2 vakuumskima conama Uporabniški priročnik FAST18 18-pozicijski menjalnik orodij (18/22XX) Električne sheme CE-označevanje CE-certifikat Vrtalno orodje Zaščitni odbijač Vakuumska črpalka (250/300 m3/h 50/60 Hz) OF0438 MAESTRO ACTIVE programska oprema za človek-stroj vmesnik (HMI) OF0429 SCM DIGITAL SOLUTIONS: MAESTRO CONNECT 52.52.20 MAESTRO CONNECT; popolna strojna prednastavitev za IOT platformo 52.52.25 MAESTRO CONNECT; letno članstvo (veljavnost nejasna) OF0422 MAESTRO CNC programska oprema Ncodpfx Adjyuyf Usvjp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 42 A, skupna višina: 1.800 mm, skupna dolžina: 4.800 mm, skupna širina: 1.000 mm, Oprema: CE označba, TEHNIČNI PODATKI Število enot: 9 1. enota: Enota za predrezkanje Orodja vključena 2. enota: Enota za lepljenje 3. enota: Pritiskalni valji Orodja vključena 4. enota: Enota za kapiranje Orodja vključena 5. enota: Enota za zaobljenje robov Orodja vključena 6. enota: Enota za vlečenje radija Orodja vključena 7. enota: Enota za zaobljenje robov Orodja vključena 8. enota: Enota za vlečenje ploskev Orodja vključena 9. enota: Sčetkasta enota Orodja vključena PODROBNOSTI STROJA Nodoyux Riepfx Advocp Napetost: 400 V Tok: 42 A Dimenzije (D x Š x V): 4.800 mm x 1.000 mm x 1.800 mm OPREMA Lepilni lonec

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Strojni tip: Avtomatski enostranski robni lepilni stroj Ključne značilnosti: Model: K 800R Kapaciteta: 1 kos, neto teža 2.472 kg Namen: Robno lepljenje in obdelava lesenih in plastičnih elementov za pohištveno industrijo Standardi: V skladu z evropskimi varnostnimi predpisi (CE certifikat) Oprema in dodatki: AVTOMATSKI ENOSTRANSKI ROBNI LEPILNI STROJ Evropski varnostni predpisi (norme CE) Olimpic K 800 "T-ERL" sestava (47) Napetost 400 V EU Frekvenca 50 Hz "AUTOSET" za sestave ER2, T-ERS in T-ERL "StarTouch" elektronsko upravljanje namesto "Touch 7" Razmikovalnik panelov na vhodni ograji Ncjdpjyxcbhjfx Advep Elektronsko pozicioniranje zgornjega pritiskača Vodoravno pomikanje enote za čelno rezanje "K-SEL" Enota za strganje roba RAS/S 2P Enota proti lepljenju "AAR" Naprava "EASY SIZE" Senzor za detekcijo roba Komplet "IGLUE" za lepilno enoto "SGP" lepilni lonec z ročnim doziranjem namesto standardnega Pnevmatski komplet z 2 pozicijama za obrezovalno enoto RI/800 Pnevmatski komplet s 3 pozicijami za obrezovalno enoto RI/800 Razpršilna naprava za občutljive robove Enota za strganje lepila "RCA/2C" Krtačna enota "SPN" Enota za strganje roba, radij = 1 mm Enota za strganje roba, radij = 2 mm Leseni bloki

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Na zalogi je horizontalna CNC mozničarka STARTECH CN Plus. Nsdpfxsip Dh Io Advjcp

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Ncjdpfx Aodd Hi Eedvsp Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Ncsdpfx Ajr A Eq Redvop Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Nsdpfx Ajiknp Rjdvocp Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Nsdpsd Akyzsfx Advocp Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: novo, Extra-long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and distortion-free, making them durable and consistently flat - Simultaneous opening & closing of the jointer tables with single-point locking - Powerful industrial motor - Fixed mounted extraction hood - Robust steel/cast iron construction - Large fence 1200 x 150 mm (standard with auxiliary fence) - Material feed with four speeds via separate motor - Thicknessing table raised on four sturdy columns, protected by dust bellows - Helical gear infeed roller on the thicknesser - Rubber outfeed roller at the exit of the thickness planer - Preparation for slot mortiser attachment - Digital display for thickness height adjustment (accuracy 0.1 mm) - Automatic star-delta switch Technical Data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thickness table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter/planer knives: 120 mm/with 4 HSS knives Ncjdpfxscq E Uuj Advep Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 - 40 %, 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Includes options: - "Teresa" cutterblock Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of thickness table with digital display - Thickness table with 2 swing-away idle rollers

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Ncsdeiiv Dcjpfx Advsp Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle configuration: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Njdpfxsg Umrme Advscp 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm Ncodpfxjd Supgs Advsp - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front Ncedpfx Aod Etkhsdvjp INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Njdpfx Adsxqggcovjcp Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. Nedpfx Adstwzyfjvocp (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” Ncodjitvkuopfx Advsp 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!