Scm Minimax Me 35 nakup rabljenega (588)

Stanje: novo, Leto izdelave: 2025, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Redpod Hx Hmsfx Ahujch Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Ideal for demanding craftsmen and carpenters - The extra-long, one-piece planer tables allow for easy jointing of workpieces - Work tables are made from grey cast iron, making them resistant and permanently flat - Jointing tables open simultaneously towards the rear with tension spring support, enabling quick and convenient changeover - Fixed-mounted extraction hood means there’s no need to reconnect the extraction hose when switching operations – this saves valuable working time - Helically serrated steel infeed roller ensures consistent and even material feed Rjdpfx Aevwflbjhujch - Rubber outfeed roller at the planing thickness exit provides uniform material extraction - Material feed with four selectable speeds - Thicknessing table adjustment via handwheel with integrated planing height display - DIGITAL version: electric thicknessing table adjustment with digital readout - Start/stop switch positioned conveniently for the operator - Powerful industrial motor - The machine’s high weight ensures maximum precision and smooth operation - Prepared for mortising device installation - Quality made in Italy TECHNICAL DATA Dimensions and Weights - Length (Product): approx. 2250 mm - Width/Depth (Product): approx. 1370 mm - Weight (Net): approx. 695 kg Jointer - Total table length: 2250 mm - Max. planing depth jointer: 5 mm - Jointer fence length: 1200 mm - Jointer fence height: 150 mm Dust Extraction - Extraction port diameter thicknesser: 1 x 120 mm Installation Information - Required space length: 2250 mm - Required space width/depth: 1440 mm - Dimensions consider maximum travel paths or usable lengths. Thicknesser - Thicknessing table length: 520 mm - Thicknessing table width: 850 mm - Minimum thicknessing working height: 3 mm - Maximum thicknessing working height: 240 mm - Minimum thicknessing working length: 220 mm - Max. planing depth thicknesser: 5 mm Electrical Data - Drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Planer Cutterhead - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 pcs - Cutterhead rotation speed: 5000 rpm - Max. planing width: 520 mm Feed - Feed speed: 5/8/12/18 m/min SCOPE OF DELIVERY - Jointing fence with round bar guide - 4 feed speeds - Tersa cutterhead Manufacturer No. 5503501

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina mize: 700 mm, dolžina mize: 2.500 mm, širina mize: 900 mm, vrsta nastavitve višine: električni, premer povezave za izpihovanje: 125 mm, Dolgopasovna brusilka SCM MiniMax L55 Specifikacija: • stanje - rabljeno, po servisu • proizvajalec - SCM, serija MiniMax • model - L55 • gibanje levo/desno • električna nastavitev gor/dol • delovna miza dimenzij 90 x 250 cm • glavni motor z močjo 3,0 kW (380V) • dimenzije traku - 120 x 6800-7000 mm • priključki za odsesavanje fi 125 mm • maks. delovna višina - 70 cm • teža - 420 kg • skupne dimenzije - 345 x 90 x 146 cm (d x š x v) Dodatne informacije: • zelo dobro tehnično stanje • prikazane slike prikazujejo dejansko stanje predmeta prodaje • možnost vklopa in preizkusa naprave na mestu Rodpfx Ajxn Trtohujch

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, – zelo dobro stanje – italijanska proizvodnja Rcodexl D Nqepfx Ahuoh – leto proizvodnje: 2000 TEHNIČNI PODATKI: OBLIČNI STROJ: – delovna širina: 410 mm – število nožev: 3 kosi – dimenzija dovajalne mize: 1030 x 410 mm – dimenzija izhodne mize: 930 x 410 mm – kotno nastavljivo vodilo – dušilni glavnik DEBELINKA: – višina skobljanja: 3-230 mm – premer valja: 72 mm – obrati valja: 5300 obr/min – dimenzije mize: 700 x 410 mm – hitrost podajanja: 7 m/min – glavni motor: 4 kW – dimenzije stroja (d/š/v): 200 / 90 / 120 cm – teža: 400 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: Dimenzije litoželezne mize: 905 x 372 mm Število vreten: 21 Razdalja med vreteni: 32 mm Maksimalna razdalja med vreteni: 640 mm Največja višina vodoravnega vrtanja: 60 mm Največji premer orodja: ø40 mm Debelina obdelovanca: 10-85 mm Največja širina plošče med ročicami: 833 mm Največji pomik vrtalne glave: 70 mm Število vpenjalnih prijemal: 16 Moč motorja: 400 V / 50 Hz, 1,8 kW (2,5 KM) Hitrost motorja: 2800 min-1 Delovni tlak: 5 bar Teža: 320 kg Pnevmatska nastavitev vrtalne glave v navpični in vodoravni smeri. Zaklep glave v položajih 0° – 45° – 90° Standardno vključeni 2 pnevmatski pritiskači za pritrjevanje obdelovanca Redsxauw Uopfx Ahujch Višina vrtanja nastavljiva z ročnim kolesom z mehanskim prikazovalnikom Globina vrtanja nastavljiva s pomočjo 5-pozicijskega revolverja.

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), Bench drilling machine with 35 spindles Electrically tiltable head Fine adjustment of head inclination Rcjdpfx Aepci Afehueh Quick-release drill bits Equipped with two motors for drill rotation Ready for use

Stanje: novo, Leto izdelave: 2025, 4-knife cutter block for optimal planing results Rsdpfx Asd Hx Hnshuech Smooth operation thanks to precision unit and robust cast iron construction Front steel infeed roller with helical serration for optimal feed Satin-finished steel outfeed roller, optionally with rubber roller in outfeed Work table mounted on four large columns for maximum stability under all working conditions Thickness table adjustment via handwheel with numeric height indicator (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator side High-power industrial motor Stable welded steel and grey cast iron construction Equipment Details: Work Table Mounted on four oversized spindles for maximum stability in all working conditions Special lifting device ensures table position remains secure even without locking Tersa Cutter Block No more adjustment or bolting required Knife change in seconds Self-locking Exceptionally quiet Thickness Table Adjustment on S 41 elite s Via handwheel with numeric indicator, precise to 0.1 mm Dimensions and Weights Length: approx. 900 mm Width/Depth: approx. 1070 mm Weight: approx. 361 kg Dust Extraction Connection Extraction port diameter (thicknessing): 120 mm Drive Power Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Space requirement explanation: Dimensions include maximum movement paths or working lengths. Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Working area explanation: Please add these dimensions to the space requirement to determine the recommended clear installation area for the machine. Thicknessing Table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Work height min.: 3 mm Work height max.: 240 mm Min. work length: 180 mm Max. material removal: 5 mm Electrical Data Supply voltage: 400 V Cutter Block Type: TERSA Diameter: 95 mm Number of knives: 4 pcs. Speed: 5000 rpm Max. planing width: 410 mm Feed Speed: 6/12 m/min

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Rcedjvwd U Ispfx Ahueh Max. working height (thickness): 240 mm Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: rabljeno, SINGLE-HEAD MULTIPLE BORING MACHINE FOR DOWELS SCM MOD. TOP 35 - USED - 380V/50Hz Rcodowrdnispfx Ahush

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna masa: 915 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 24 A, vhodna frekvenca: 50 Hz, Work table dimensions: 3465 x 710 mm, height: 875 mm Edge band thickness for roll edges: 0.4 – 3 mm Edge band thickness for strip edges: up to 5 mm Min. – max. workpiece thickness: 8 – 50 mm Min. workpiece length/width with roll edges: 190/110 mm Minimum panel length: 120 mm Feed speed: 9 m/min Feed motor: 0.55 kW Working pneumatic pressure: 6.5 bar Extraction hood glue pot: 80 mm 2 extraction hoods, flush trimming unit: 60 mm 2 extraction hoods, pre-milling unit: 80 mm Working temperature: 20–190°C Equipment: Pre-milling unit (jointing) Corner rounding unit (corner copying) Gluing unit, applying and pressing the edge (self-lubricating glue pot) End trimming unit for trimming the projecting edge front and rear at 90° Flush trimming unit (jointing) Scraper unit Buffing unit Flat scraper Automatic application of strip edges with edge magazine Quick-change kit for glue pot Device for plate edge heating Redpfxsuacqzo Ahusch Anti-adhesive spray unit Spray device for final edge finishing

Stanje: novo, Leto izdelave: 2025, Professional wide-belt sander Electric height adjustment of the table Quick belt tensioning via lever Upper belt with additional graphite coating Professional sanding shoe Rollers with 250 mm diameter ensure optimal guidance 2 sanding belt speeds Right and left rotation motors Tilting sanding shoe adapts to the surface Quick and easy sanding belt replacement Right-left rotation standard Manufactured in Italy. Precisely balanced rollers provide optimal belt drive Quick belt tensioning enables fast and hassle-free belt changes. Rodswxrl Nopfx Ahujch Technical data: Working table dimensions: 2500 x 1100 mm Working table height adjustment: 580 mm Cross travel of the working table: 620 mm Sanding shoe dimensions: 150 x 360 mm Belt speed: 9 m/s and 18 m/s Motor power 400 V / 50 Hz / S6 - 40%: 4 kW Table height adjustment motor power: 0.45 kW Drive roller diameter: 250 mm Sanding belt dimensions: 7100 x 150 mm Dimensions (L x W x H) in mm: 4040 x 1510 x 1510 mm Extraction port diameter: 140 mm Weight: 420 kg

Stanje: rabljeno, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested, we offer refurbishment services; please contact us. Rodpfx Aheu U D N Ueuech

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Feed Redpod Hx Hpofx Ahujch Speed 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2023, minimax twf 55es Robust steel and cast iron construction Rjdpfx Ahspdp Ncoujch Anodized aluminium format sliding table Large-dimensioned, tiltable milling unit made of cast iron, tiltable up to -45° backwards Four milling speeds from 3,500 to 10,000 rpm Standard right/left rotation Height and angle display accurate to 0.1 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for long-lasting precision Powerful 5.0 kW industrial motor Curved milling guard included in delivery TECHNICAL DATA Dimensions and Weight Length (product) approx. 1,200 mm Width/Depth (product) approx. 1,400 mm Weight (net) approx. 510 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Table length 1,200 mm Table width 530 mm Table height 900 mm Sliding table length 1,200 mm Sliding table width 360 mm Sliding table height 142 mm Installation Information Space requirement length 2,800 mm, width/depth 2,120 mm Space Requirement Explanation The dimensions consider maximum travel paths or usable lengths. Machine body length 1,200 mm Machine body width/depth 846 mm Working area length 1,600 mm Working area width/depth 2,300 mm Working Area Explanation Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical Data Connection voltage 400 V, mains frequency 50 Hz Drive motor power Milling spindle 5.0 kW Spindle tilt 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3,500/6,000/8,000/10,000 rpm Milling spindle speed display LED at the machine front Spindle shaft diameter 30 mm Max. milling tool diameter Max. tool diameter 240 mm Max. lowerable tool diameter 230 mm Max. profiling tool diameter 240 mm Max. tenoning tool diameter 320 mm

Leto izdelave: 2004, Stanje: dober (rabljeno), I am selling a multi-spindle dowel boring machine, SCM TOP 35, year of manufacture 2004. Number of spindles: 35 Spacing: 32 mm 6 preset drilling depth positions 2 aluminium rulers, each 1500 mm long 4 stops for aluminium rulers 4 pneumatic material clamps Rcjdsiu Urpopfx Ahueh 2 electric motors, each 2.2 kW Swivel range: 0-90°, fully servo-driven Two-step dowelling with active pneumatic cylinder / max. drilling depth 140 mm! Max. workpiece width across the drilling head: 1280 mm. Total weight: 693 kg. Condition: very good. Available immediately.

Stanje: novo, - NEW - Rcodpfxevyuqfj Ahujh Description Cutting plane directly at the saw blade Heavy-duty steel cast iron construction Precision-guided sliding table made of aluminum, anodized as standard Large support table on telescopic arm, longitudinally adjustable Extendable aluminum telescopic fence, angle-adjustable with professional fence stoppers Parallel fence with quick-lock and fine adjustment Large, milled cast iron working table remains permanently flat Standard table extension and table enlargement enable easy processing of larger workpieces Smooth running and precise cuts Equipped with a powerful three-phase motor The large-dimensioned saw unit made from cast iron is double-mounted on the cast table, ensuring stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with scoring unit installed Equipment features: Double trunnion saw unit Large, made of steel/cast iron Close to the saw blade, mounted on both sides for precision, smooth running, and long service life Height and tilt (up to 45°) adjustable via hand crank Maximum cutting height is achieved even with scoring unit installed Also available with scoring unit Telescopic fence Extendable telescopic fence up to max. 2550 mm Angle-adjustable With professional fence stoppers Aluminum sliding table Equipped with the proven ball contact system Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10-year Holzkraft warranty on wear of the guide rails Parallel fence with round bar guide With fine adjustment and quick lock Stable round bar guide made of precision-ground steel, 45 mm diameter Foldable as standard for cutting large workpieces Technical Data: Dimensions and Weights Net weight approx. 380 kg Extraction connection Suction port diameter 120 mm Saw blade guard suction port diameter 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical Data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated duty cycle S6 Current type AC Duty cycle 40 % Mains frequency 50 Hz Sliding table and table Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscutting width to the left of blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilt 90 - 45° Saw blade speed 4000 rpm Item No. 5504323

Stanje: pripravljen za uporabo (rabljen), Tehnične lastnosti Širina mize: 550 mm Asimetrična dolžina mize: 2700 mm 4-nožni valj premera 120 mm Ograja iz litega železa, nagib od 90° do 45°, dolžina 1200 mm Motor: 4 kW Sesalni nastavek premera 120 mm Težka izvedba stroja Elektrika in motorji Napetost: 380 V Redpfjub Euljx Ahuoch Priklop: trifazni Moč: 5 kW Motor: 5,5 KM Skupne dimenzije

Stanje: rabljeno, Leto izdelave: 2016, Horizontalno ali vertikalno vrtanje 21 vreten na 32 mm razmaku Največja širina plošče: 833 mm Največja razdalja med vrtalnimi središči: 640 mm Najmanjša / največja debelina plošče: 10–85 mm Delovna miza: 905 x 372 mm Maksimalni hod vrtalne enote: 70 mm Rsdpfxowl H Dgj Ahusch Glavni motor: 1,8 kW Serijska številka: KK135136 Leto izdelave: 2016, skladno s CE standardi

Stanje: novo, Leto izdelave: 2025, CASADEI Libra 35 – Wide Belt Sander, Dual-Belt Version Immediately Available – Ex stock 54634 Bitburg Technical Data: Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Sanding belt width: 1115 mm Sanding belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table height adjustment motor: 0.25 kW Drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Illustration with optional equipment. Wide belt sander in dual-belt configuration for up to 1100 mm working width, with numerous equipment options for cost-conscious craftsmen and workshops. Robust mono-block steel machine frame, reinforced with tubular supports and high-mounted working units for maximum rigidity User-friendly operation thanks to clearly arranged control panel at the front Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air demand Automatic star-delta start for main motor Rjdpfecr S Ecsx Ahusch Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt drive via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with fine adjustment capability for the grit/belt thickness Quality – Made in Europe Version RTC: 1st unit: diagonally grooved steel roller Ø 120 mm, with fine adjustment for calibration 2nd unit: combination unit with fine adjustable working height for calibration and fine sanding; rubber-coated roller Ø 120 mm (45 Shore), and hard sanding pad with graphite plate on replaceable insert Scope of delivery: Working table height adjustment with electronic display of working height Oscillation of sanding belts via electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-backflow device (C.E.) Star-delta starting of main motors Grooved calibration steel roller Selector switch for sanding pad positioning from control panel Optional accessories: – Semi-hard flat sanding pad – Automatic belt centering system Location: Ex stock Bitburg – at a special price

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Rcodpovwga Hefx Ahuoh Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: novo, - NEW - Description - Robust steel grey cast iron construction - Milling spindle tiltable backwards from 0° to -45° - Three spindle speeds from 3,500 – 10,000 rpm - Standard with reversing (left/right rotation) for milling spindle - Large dimensioned milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and trouble-free speed change - Powerful 5.0 kW industrial motor - Arc milling safety hood included as standard Equipment Details Aluminum sliding table - Equipped with a field-proven ball contact system - Torsion-resistant, high-precision, easy to operate, and trouble-free for daily use - 10-year Holzkraft guarantee on wear of guideways Cast iron milling unit - Mounted directly onto the milling table - Spindle bearings positioned high with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors - Equipped with a powerful three-phase motor Milling guard - The milling guard is equipped as standard for maximum safety with height-adjustable guide rail and protective shield Milling fence - Precise milling fence with quick adjustment and fine-tuning feature, including scale on the fence jaw - Integrated extraction port ensures clear visibility Milling table opening - Large milling table opening allows use of large panel raising cutters and tenoning and slotting tools above and below the table Arc milling safety hood - Included as standard Reversible fence jaws - Versatile, integrated fence to bridge the tool gap - Enables safe work even with narrow workpieces Technical Data: Dimensions and Weights Net weight approx. 290 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Rcjdpfx Ahovwf Ucsujh Work table length 1,000 mm Sliding table length 1,000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Space requirements length 1,945 mm Machine body width/depth 710 mm Space requirements width/depth 2,220 mm Working area length 1,600 mm Explanation of Space Requirements Dimensions take into account maximum travels or usable lengths. Working Area width/depth 1,600 mm Machine body length 1,000 mm Explanation of Working Area Please add the stated measurements to the space requirements to determine the recommended free installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Phase(s) 3Ph Drive motor power 5.0 kW Current type AC Milling Spindle Spindle tilt 0 to -45° Spindle speed(s) 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Max. spindle projection above table 130 mm Max. Milling Tool Diameter Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Max. profile cutter diameter 210 mm Delivery Scope Arc milling safety hood Anodised aluminum sliding table Telescopic mitre fence Aluminum fence jaws . 5502045

Stanje: novo, – New – Description: TERSA quick-change system for tool-free, rapid planer knife changes Four-knife cutterblock delivering superior planing results Smooth operation due to precision engineering and heavy cast-iron construction Long surfacing tables for accurate jointing Robust surface tables made from ribbed grey cast iron, machined and stress-relieved for high durability and permanent flatness Large, stable aluminium surface fence with round-bar guide (1200 x 150 mm), easily adjustable and tiltable up to 45° Rcedpfx Ahovwf Hrjujh Auxiliary fence included as standard Powerful 5.0 kW industrial motor Stable steel and cast-iron construction Slot mortising attachment available as an option Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Net weight: approx. 465 kg

Stanje: novo, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made of heavily ribbed cast iron and frame made of welded steel ensure torsional stiffness and vibration-free operation Rcsdpfxjvwf Eno Ahush - Unique in this performance class: smooth-running anodized aluminum sliding table with ball contact system - Saw blade tiltable from 90° - 45° - Table extension with angle scale and aluminum crosscut fence for mitre cuts on panels and large workpieces - Planer unit equipped with TERSA quick-change system with three planer knives - Spiral-toothed steel feed roller for consistent workpiece feed during thickness planing - Curved milling guard hood for profiling, standard with fine adjustment - Milling unit with two speeds - Power transmission for the units via three independent motors - Quality Made in Italy Technical Data: Dimensions and Weight Net weight approx. 245 kg Surface Planer Planer table width 300 mm Planer table length 1200 mm Saw/Planer fence tilt angle 90/45° Max. surface planing depth 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter for saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Remarks on space requirement: Dimensions reflect maximum travel range or working length. Thickness Planer Thickness table length 450 mm Thickness table width 300 mm Min. working height 3 mm Max. working height 200 mm Max. thicknessing depth of cut 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Rated duty cycle drive motor S6 Duty cycle drive motor 40 % Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Spindle Moulder Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle height 75 mm Spindle speeds 5000 – 7500 rpm Max. Cutter Diameter Max. cutter diameter 160 mm Max. lowerable cutter diameter 180 mm Max. tenoning cutter diameter 275 mm Planer Knife Shaft Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with rip fence 540 mm Max. crosscut width left of blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Feed Feed speed 6 m/min Scope of Delivery: - Tersa quick-change planer knife shaft - Anodized aluminum sliding table - Multifunction fence for rip and surface planing - Table extension with crosscut fence and fence jaw - Eccentric clamping arm Item No.: 5500030

Stanje: novo, Description Worktable made from heavily ribbed cast iron and base frame from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: Format sliding table made of anodized aluminum for maximum cutting precision. Cutting plane located directly at the saw blade. Saw blade tiltable from 90° to 45°. Squaring frame with aluminum crosscut fence and adjustable stop for panels and large workpieces. Spindle moulder guard for profiling operations. Two independent motors for each working unit. TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Dust extraction connection Dust extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Rcsdpfx Ahevwfqwoujh Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Duty cycle of drive motor: S6 Drive motor duty cycle: 40% Drive motor power: 2 x 1.8 kW Sliding table and worktable Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000/7500 rpm Max. spindle tool diameter Max. tool diameter: 160 mm Max. tool diameter (tenoning): 200 mm Panel saw unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilting range: 90 – 45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. blade projection at 90°: 67 mm Max. blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Features Anodized aluminum format sliding table Squaring frame with angle-adjustable crosscut fence, flip stop, and degree scale Saw rip fence Eccentric clamp Table extension Milling fence with wooden fence jaws Manual height adjustment of spindle Manual height adjustment of saw blade Manual tilt adjustment of saw blade

Stanje: rabljeno, Technical specifications: Track width: 500 mm Rcjdpfx Ahol Eyfqsuoh Maximum cutting height: 120 mm Infinitely variable feed adjustment Automatic lubrication system Anti-kickback protection Fence Safety switch Main motor power: 45 kW Power supply: 380 V Overall dimensions: Length: 2,500 mm Width: 2,200 mm Height: 2,360 mm