Scm Dogma nakup rabljenega (616)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Nwsdsyftzkjpfx Abrjh Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address & telephone number!)

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Nwsdpfxocrnm Nj Abrsh Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: novo, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and height. Gray cast iron saw unit ensures torsional rigidity and vibration-free operation. Easy panel handling thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – sliding table guided by a highly precise, time-proven ball contact system for smooth operation. Scoring unit features its own drive and is easily adjustable from outside. Saw unit accommodates saw blades up to 400 mm diameter. Scoring blade diameter: 160 mm. Two-position manually adjustable saw blade pendulum guard. 3-axis control. Motorized parallel fence with electronic position control. Includes: - Position display via encoder - Adjustment via ball screw spindle - Stepless setting via switch or automatic positioning system - Incremental adjustment capability - Swiveling fence retraction below table - Cutting width 1270 mm - Programmed movement of motorized saw unit adjustment and tilting UP version: - Swiveling operator panel for maximum flexibility X version: - Compex miter fence for fast, precise miter cuts with automatic length compensation (length adjustment) - Outrigger with angle-adjustable telescopic crosscut fence - Optional degree scale division (Art.-No.: 5510403) - Longitudinal fence with 2 LCD position displays Options included: - Version with max. sliding table travel of 3200 mm - Integrated main and scoring blade start/stop switches on the squaring frame - Squaring frame with CompeX feature - Version “READY 3 UP” - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Nedpfjd Akygsx Abrjwh Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with parallel fence: 1270 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height 90°: 136 mm Max. cutting height 45°: 97 mm Max. cutting height -45°: 60 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. Nwsdpecuwptsfx Abrsh 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: Nwedpfx Abjd Etkhjreh • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Work table dimensions: 600 x 520 mm Work table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Njdpfxjdibw Aj Abrjwh Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Leto izdelave: 2003 Napetost: 400 V Frekvenca: 50 Hz Teža: 3200 kg Nwedstr A Evjpfx Abrsh Število osi: 3

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, working width 220 mm working height 120 mm 4 heads spindle diameter 40 mm infinitely variable feed speed adjustment star/delta start head adjustment in two axes electric adjustment of the pressure beam spring-loaded feed roller pressure spindle speed 6000 rpm Nwodpfxeyxlqxe Abreh

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1995, SCM Compact 23 Mehrseitenhobelmaschine Beschreibung Spindelanordnung: unten – rechts – links – oben Einlauftischlänge: 2000 mm Max. Arbeitsbreite: 230 mm Nwsdpfxjq Iipxe Abrjh Max. Arbeitshöhe: 120 mm Vorschubgeschwindigkeit: 6–12 m/min Spindeldrehzahl: 6.000 U/min 400 Volt, 50 Hz CE-Zertifizierung (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, SCM Compact 23 K Skobeljni stroj Opis Vretena v zaporedju: spodaj-desno-levo-zgoraj Dolžina dovedbene mize: 2500 mm Maks. delovna širina: 230 mm Maks. delovna višina: 120 mm Podajalna hitrost: 6–12 m/min Hitrost vretena: 6.000 min⁻¹ 400 V, 50 Hz CE Nwjdpfx Aswc A R Dsbroh (Vse spremembe, napake v tehničnih podatkih, informacijah in cenah so pridržane. Dobavljivost je odvisna od predhodne prodaje. Nobenega jamstva za natisnjene podatke!) Najboljše stroje za obdelavo lesa iz Nizozemske.

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) Nwodpfx Asxy Tmnjbroh C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 8028 TEHNIČNI PODATKI - širina gosenice: 300 mm - delovna širina valja: 300 mm - maks. premer diska: 350 mm - premer izvrtine diska: 80 mm - maks. višina reza: 120 mm - širina mize: 750 mm - dolžina mize: 1540 mm * zgoraj: - izmetniki (ovira, ki preprečuje vračanje materiala) - drsni valj, kovinski, pritisni - izmetniki/zaporne kljuke - drsni valj, kovinski, pritisni - valj z žagami - 2 gladka drsna kovinska valja * spodaj: - vodilna letva (pnevmatsko nastavljiva) - izmetniki/zaporne kljuke - gosenica - centralno mazanje gosenice Nsdpjzhba Ssfx Abrjwh - brezstopenjska regulacija podajalne hitrosti - podajalni motor: 1,1 kW - glavni motor: 25 kW - premer odsesovalnega priključka: 1x200 mm, 1x120 mm - skupne mere d/š/v: 2430 x 1530 x 1450 mm - teža: 1540 kg PREDNOSTI – italijanska proizvodnja – vodilna letva – pnevmatsko nastavljiva – zelo dobro stanje – rabljena večlistna žaga Neto cena: 38.900 PLN Neto cena: 9.262 EUR glede na tečaj 4,20 EUR (Cene se lahko spreminjajo glede na tečajne razlike)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 8029 TEHNIČNI PODATKI - širina gosenice: 300 mm - delovna širina valja: 300 mm - maks. premer krožne žage: 350 mm - premer izvrtine krožne žage: 70 mm - maks. višina reza: 120 mm - širina mize z razširitvijo: 760 mm - dolžina mize: 1540 mm * od zgoraj: - metala za preprečevanje vračanja materiala (bariere) - kovinski drsni pritisni valj - metala/povratne zaskočke - kovinski drsni pritisni valj Nwjdpfxezhbafo Abrsh - valj z žagami - 2 gladka kovinska drsna valja * od spodaj: - vodilna letvica - metala/povratne zaskočke - gosenica - centralno mazanje gosenice - brezstopenjska nastavitev podajalne hitrosti - podajalni motor: 1,1 kW - glavni motor: 18,5 kW - premer izpušne cevi: 180 mm - skupne dimenzije dolžina/širina/višina: 2250x1450x1600 mm - teža: 1570 kg PREDNOSTI – italijanska proizvodnja – zelo dobro ohranjena – rabljena večlistna krožna žaga Neto cena: 36.900 PLN Neto cena: 8.786 EUR po tečaju 4,20 PLN/EUR (Cene se lahko spreminjajo glede na večje nihanje tečajev)

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 8031 TEHNIČNI PODATKI - širina gosenice: 300 mm - delovna širina valja: 300 mm - največji premer krožnika: 350 mm - premer luknje krožnika: 70 mm - največja višina reza: 120 mm - širina mize z razširitvijo: 1030 mm - dolžina mize: 1740 mm * od zgoraj: - izmetači (pregrada proti vračanju materiala) 2 vrsti - kovinska, pritisna drsna rola - izmetači/zapornice - kovinska, pritisna drsna rola - valj z žagami - 2 gladki, kovinski drsni roli * od spodaj: Nodpfxszha Ize Abrswh - vodilna letvica - izmetači/zapornice - gosenica - centralno električno mazanje gosenice - brezstopenjska nastavitev podajalne hitrosti - podajalni motor 1,1 kW - glavni motor 25 kW - premer odsesovalnega nastavka 1x200 mm, 1x120 mm - skupne dimenzije dol./šir./viš. 2550x1800x1450 mm - teža 1770 kg PREDNOSTI – italijanska proizvodnja – nelakirana – zelo dobro stanje – rabljena večlistna žaga Neto cena: 57.900 PLN Neto cena: 13.786 EUR (odvisno od tečaja 4,20 EUR) (Cene se lahko spreminjajo glede na visok tečajni nihaj)

Stanje: rabljeno, Tehnični podatki: Nwedpfx Abjzd Eu Soroh Premer vretena: 30 mm Višina vretena: 170 mm Obrati: 3000/4500/6000/7000/10000 obr/min Ročna nastavitev višine vretena Blokada vretena Dimenzije delovne mize: 720x2620 mm Nastavljive vodilne roke Moč motorja: 5 kW Napajanje: 400 V Skupne dimenzije: Dolžina: 1050 mm Širina: 2620 mm Višina: 1850 mm

Stanje: rabljeno, Tehnični podatki: Premer vretena: 30 mm Višina vretena: 130 mm Obrati: 3000/6000/8000/10000 obr/min Ročna nastavitev višine vretena Njdpfxszd Eufj Abrewh Blokada vretena Dimenzije delovne mize: 1800x650 mm Nastavljiva vodila Moč motorja: 4 kW Napajanje: 400 V Skupne dimenzije: Dolžina: 650 mm Širina: 1080 mm Višina: 1300 mm

Stanje: rabljeno, Tehnični podatki: Širina gosenice: 220 mm Nwjdpfx Abezd En Ejreh Maksimalna višina reza: 120 mm Maksimalni premer žaginega lista: 350 mm Stopenjsko brezstopenjsko nastavljanje podajanja Avtomatski mazalni sistem Zaščita proti povratnemu udarcu Vodilo Izvlečni priključek: 180 mm Varnostno stikalo Napajanje: 380 V Moč glavnega motorja: 18,5 kW Skupne dimenzije: Dolžina: 1700 mm Širina: 1600 mm Višina: 1250 mm

Stanje: zelo dobro (rabljeno), Izjemno stanje: Sandya 1100, preproga in valj kot nova, pnevmatski brusilni čevelj, brezstopenjski pomik. Nodpszbct Isfx Abrewh

Stanje: rabljeno, številka stroja/vozila: 008047, Pozicija 1: Krtačni stroj SCM-BRAVOROBOT P1 Nodpfsw Idbyex Abrswh Pozicija 2: Lakirni stroj SCM-BRAVOROBOT P1 Pozicija 3: Transfer SCM-BRAVOROBOT P1 Pozicija 4: Sušilnik s stisnjenim zrakom SCM-BRAVOROBOT P1 Pozicija 5: Sušenje laka SCM-BRAVOROBOT P1

Stanje: rabljeno, Tehnični podatki: Delovna širina: 900 mm 1 kalibracijska enota Premer valja: 140 mm 2 kalibracijska enota Premer valja: 140 mm Višina obdelovanca: 160 mm Premer odsesovalnega priključka: 2x160 mm Električno dvigovanje Analogni prikazovalnik Varnostno stikalo Moč glavnega motorja: 9,5 kW Napetost: 380 V Skupne dimenzije: Nsdpfszd Dcnex Abrjwh Dolžina: 1500 mm Širina: 1600 mm Višina: 1800 mm

Stanje: rabljeno, Tehnični podatki: Premer vretena: 30 mm Višina vretena: 160 mm Nagibno vreteno: -10° - 45° Obrati: 3000/4500/6000/8000/10000 obr/min Nsdpszd Ap Tsfx Abrowh Ročna nastavitev višine in kota vretena Blokada vretena Dimenzije delovne mize: 760/2500x1000/1500 mm Nastavljive vodilne roke Moč motorja: 4 kW Napajanje: 380 V Skupne dimenzije: Dolžina: 1500 mm Širina: 2500 mm Višina: 1350 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Dolžina reza: 3200 mm Širina reza / Globina reza: 3200 mm Višina reza: 130 mm Glavna žaga Predrezalna skupina 1 fiksna sprednja zračna miza z vodilom 2 premični sprednji zračni mizi Potisni voziček z 11 vpenjali Konzola z integriranim računalnikom "eye-M" Programska oprema: Maestro Cut START/STOP nožni pedal Teža pribl. 4150 kg. Nwodpfx Abjzdqk Sorjh Vključno s programsko opremo za optimizacijo reza Na voljo september 2026

Stanje: rabljeno, Leto izdelave: 2003, s Tersa nožnim valjem in električnim nastavljanjem višine, mize izmerjene zelo natančno maksimalno 1/10 mm Nwedpszd Hdnofx Abreh popolnoma nastavljeno rabljeno top stanje očiščeno preizkušeno delovanje delno obnovljeno Blagovna znamka: SCM Tip: FS 410 Leto izdelave: 2003 Št. stroja: 159435 CE-tip preizkušen GS lesni prah preizkušen Število nožev: 3 Podajalna hitrost m/min.: 6 + 12 zaščita mostu rezkani robovi miz tiho delujoči robovi miz motorizirana avtomatska zavora Tersa sistem nožev gumijasti izhodni valj digitalni prikaz višine rezkanja električno nastavljanje višine z natančnim pomikom Tip vgrajen odsesovalni pokrov Motor kW: 5,5 Širina skobljanja cca mm: 410 Višina skobljanja cca mm: 240 Dolžina mize cca mm: 2100 Nova cena cca €: 7.500,00 Priklop za odsesavanje mm: 100 Potrebni prostor cca D x Š x V mm: 2100x900x1300 Teža cca kg: 710 Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v stanju, kot je bilo vidno, brez garancije in jamstva

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013 Rezkalna glava Delovno območje X: 3000 Delovno območje Y: 900 Delovno območje Z: 50 Ločeni agregati: 1 Navpični vrtalnik: 12 Vodoravni vrtalnik X: 4 Nwodpfx Ajw Npyqebrsh Vodoravni vrtalnik Y: 2 Rezalna žaga za utore: Da Stacionarni stroj: Da Sistem vpenjanja: Klešče Varnost: Fotocelica Krmiljenje in programska oprema: SCM XILOG Minimalne dimenzije: 3920x1170x2150

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, SCM TF130 CLASS Spindle Moulder Used machine Year: 2014 Specifications: - Manual adjustment for the vertical movement of the spindle with digital readout for setting the working height - Registerable spindle fence with wooden tables, extraction hood, and wooden table extension, max. tool Ø250 mm - Spindle speed: 3000/4500/6000/7000/10000 rpm - Electric display for selected speed - Electrical pre-wiring for drive - Spindle rotation reversal with electric interlock for start-up - Automatic star-delta starter - Motor output [S6 -40%]: 7kW / 9.5HP / 50Hz - Protection for operations on the spindle shaft (max. tool Ø160 mm) - Emergency stop button - Safety micro-switches for spindle lock - Safety micro-switch at access door to motor - Lockable main switch - Motor circuit breaker - Transformer for auxiliary circuit 110V - Automatic motor brake on main motor - CE conformity certificate Technical data: - Table dimensions: 1200x730 mm - Usable spindle length CE Ø30/35(40/50): 140(180) mm Nwodpfjy R Tw Dsx Abrsh - Spindle protrusion above table: 52 mm - Spindle protrusion above table with interchangeable spindle: 92 mm - Max. retractable tool diameter below table, with ring table: 320x85 mm (with "Fast" segmented table = 300x85 mm) - Mechanically programmable spindle fence travel: 125 mm (adjustment relative to spindle axis from -125 to +125 mm with MK5 spindle) - Extraction hood outlet diameter: 120 mm - Extraction ports on the frame (for forced air cooling of the electrospindle): 120 mm - Extraction air velocity: 20 m/s - Extraction air consumption: 1700 m³/h Machine options: - Bar fence - "TL" version for tenoning and profiling (CE compliant), - with manually operated tenoning carriage, - eccentric clamp, - tiltable telescopic fence with 4 reference stops for workpiece length setting, - anti-splintering device with reference stop on the fence, - additional complete infeed table extension with adjustable front support bar for large workpieces, - tenoning hood with extraction: - with quick tool change, max. tool diameter 300 mm, - with 30-35 mm spindle, max. tool diameter 300 mm, - with 40-50 mm spindle, max. tool diameter 350 mm, - emergency stop button, - operator protection arm, - micro-switches for control and limitation to 3000/4500 rpm during tenoning operations. Note: - Only available with a machine configuration compliant with CE standards. - Only available with mechanically adjustable spindle fence or alternatively the “Flex” spindle fence. - A minimum main motor power of 7 kW is required.