Rezkalni Stroj Tabele nakup rabljenega (75.894)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display and has only been used for demonstration purposes. Optimill F 80 CNC milling machine, direct from the manufacturer. • Column-type machine bed made of cast iron for high rigidity • Carousel-type tool changer with 12 tool positions • All linear guides equipped with stainless steel covers • Automatic central lubrication system • Siemens main spindle motor • Siemens servo drives on all axes (closed control loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency-stop switch greatly simplifies program setup SINUMERIK 808 ADVANCED CNC technology from the industry leader SINUMERIK 808D on PC • Identical control software package, further simplifying machine operation Compact and Robust • Thanks to its panel-based CNC design with few interfaces and a control panel rated to IP65, the SINUMERIK 808D ADVANCED is perfectly suited for operation in demanding environments Communication Interfaces • Front-panel USB (IP65) • Serial interface RS232C • Rear RJ45 Ethernet port • Technology-specific keyboard layout • Durable hard keys with protective membrane Dimensions and Weight Length: approx. 1995 mm Width/Depth: approx. 1930 mm Height: approx. 1640 mm Weight: approx. 2300 kg Rapid Traverse Speed X-axis: 20 m/min Y-axis: 20 m/min Z-axis: 20 m/min Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 12 kVA Horizontal milling table Length: 800 mm Width: 260 mm Distance vertical spindle – table (min.): 100 mm Distance vertical spindle – table (max.): 550 mm T-slot size: 16 mm Number of T-slots: 5 Distance between T-slots: 50 mm Maximum load: 200 kg Precision Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant System Coolant pump drive power: 450 W Tank capacity: 80 l Pneumatic Connection Hnsdpew Ea Rtsfx Af Teg Operating pressure: 7 bar Travel X-axis (automatic): 450 mm Y-axis (automatic): 260 mm Z-axis (automatic): 450 mm Distance spindle to column (max.): 370 mm Vertical Spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Cont. drive motor power S1: 3.7 kW Drive motor power S6-30%: 5.5 kW Cont. drive motor torque S1: 24 Nm Drive motor torque S6-30%: 36 Nm Feed Motor Torque X-axis (S1): 6 Nm Y-axis (S1): 6 Nm Z-axis (S1): 11 Nm Tool Changer Type: Carousel Number of tool stations: 12 tools Maximum tool diameter: 95 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time (chip-to-chip): 7 s

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Vertikalni rezkalni stroj CAMAM mod. FV-1T-1P - v skladu s CE normami - Napetost: 380/50 - Leto: 1998 Hnedpfx Afjx Rdhts Tsg - Komplet z navodilom za uporabo in CE izjavo

Stanje: dober (rabljeno), Leto izdelave: 1980, TOS FNGJ 32 rezkalni stroj Leto izdelave: 1980 S krmiljem Heidenhain TNC 135 Z dodatno opremo Hnodpfx Afsx U Eb Ao Tsg Miza – 800x400 mm Vrtljaji vretena – 40-2000 min⁻¹ Podaljški vzdolžno in prečno – 8-400 mm/min Vertikalni pomiki – 4-200 mm/min Razdalja od osi horizontalnega vretena do delovne površine mize: 125-525 mm Razdalja od osi navpičnega vretena do površine mize: 58-458 mm Pomiki osi X – 600 mm Pomiki osi Y – 400 mm Pomiki osi Z – 400 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 800 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, potovalna razdalja osi X: 800 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, hitrost pomika os X: 5 m/min, hitrost podajanja osi Y: 5 m/min, hitrost podajanja os Z: 2 m/min, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 55 obr/min, poteza s peresom: 75 mm, hod vretena: 75 mm, premer tulec: 80 mm, hitro pomikanje X-os: 5 m/min, hitri pomik os Y: 5 m/min, hitri pomik na osi Z: 2 m/min, širina mize: 500 mm, dolžina mize: 900 mm, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 55 obr/min, obremenitev mize: 400 kg, skupna masa: 2.700 kg, teža obdelovanca (maks.): 400 kg, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, ABENE VHF 380 CNC – Universal Milling and Drilling Machine (NEW) Condition: New Location: Pfullingen (Germany) Inspection: Under power, ready for demonstration Technical Specifications Travel paths: X = 800 mm | Y = 500 mm | Z = 475 mm Control: Heidenhain TNC 620 with ABENE/Heidenhain software Spindle speed: 55 – 5,000 rpm (2-speed gearbox, frequency-controlled) Spindle taper: SK 40 (DIN 2080 / 69871 / 7388) Spindle motor: 7.5 kW AC motor Feed rates: X/Y up to 5,000 mm/min, Z up to 2,000 mm/min Swivel head: 0 – 140° Table size: 900 × 500 mm T-slots: 7 × 14 mm (1 × H7) Max. table load: 400 kg Dimensions (W × D × H): approx. 2,300 × 2,450 × 2,200 mm Weight: approx. 2,700 kg Hnodpfx Afjwf E R Es Teg Features • Heidenhain TNC 620 with ABENE software for user-friendly operation • Electronic handwheel HR-510 for X, Y, and Z axis • AC servo drives with stepless control • Automatic central lubrication for all guideways and ball screws • Hardened and ground guideways • Collision protection monitoring on all axes • Removable chip tray • 24 V / 70 W LED machine lamp • Complete electrical installation 400 V / 3 Ph / 50 Hz • Table enclosure with sliding door • Including operating manual, spare parts catalog, and test certificate Description The ABENE VHF 380 CNC is a universal milling and drilling machine “Made in Sweden” featuring the proven ABENE slant-bed design. It combines precision, stability, and easy operation – ideal for training, tooling, and small-batch production. Thanks to the intuitive Heidenhain TNC 620 control, the machine is exceptionally user-friendly and perfectly suited for deepening CNC skills in practical applications. The machine is located in our warehouse in Pfullingen and can be inspected and tested under power. We will gladly arrange a demonstration appointment!

Stanje: dober (rabljeno), Leto izdelave: 2004, potovalna razdalja osi X: 450 mm, pomik osi Y: 300 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 100 mm, Orodjarska rezkalna stroj V/H Proizvajalec: Emco Tip: FB-4 Leto izdelave: 2004 Krmiljenje: prikazovalnik Heidenhain ND-760 Tehnični parametri: ----- • Pomiki X-Y-Z: 450 x 300 x 350 mm • Vpenjalna površina: 800 x 400 mm • Vpenjanje orodja: SK-40 • Hodi pinole: 100 mm • Rezkalna glava vrtljiva ± 90° • Vreteno: 50 – 2.500 obr/min • Izbiranje hitrosti: 18 stopenj • Električno centralno mazanje • Strojna luč • Hladilni sistem • Kabina proti brizganju (zložljiva) • Teža: 1.550 kg Hsdpfxsx Tzk Re Af Tjng • Dimenzije DxŠxV v mm: 1.485 x 1.500 x 1.700 mm Dodatna oprema: ----- • 4x nastavljive noge za stroj • Navodila za uporabo • Vpenjalni ključ • Nasprotni ležaj za vodoravno obdelavo • Set gredi za vodoravno obdelavo • Zaščitni pokrov mize (trenutno odstranjen) Na voljo sta dve identični stroji, obe servisirani in delno prenovljeni v Q4-2025.

Stanje: rabljeno, Panel saw and spindle moulder Hammer B3 Perform, very good condition, 4 kW, 2500 mm sliding table length Subject to price changes, errors, typographical and printing mistakes excepted. Hedpfjvr I I Uox Af Tong

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine directly from the manufacturer. F 110 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control system stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile guideways with recirculating ball screws for high rapid traverse speeds in all axes · High-torque servo drives on all three axes · Telescopic way covers on all three axes · Automatic lubrication · Spindle oil cooler · Massive, precision-ground milling table with three T-slots, oversized and ground for accuracy · The portable electronic handwheel with enable switch and emergency stop button greatly simplifies program setup · Coolant system with chip flushing device and cleaning gun · Auger-type chip conveyor · Chip trolley · RJ45 port and 230 V power connection · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dust particles · Machine lamp provides over 500 lux in the working area RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote diagnostics AST function; enables easy optimization for higher demands on dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and Weights Length approx. 2100 mm Width/Depth approx. 2300 mm Height approx. 2750 mm Weight approx. 4100 kg Drilling-Milling Capacity Maximum tool diameter: 90 mm Electrical Data Connection voltage: 400 V Frequency: 50 Hz Electrical connection Total connected load: 20 kW Milling Table (Horizontal) Length: 850 mm Width: 400 mm Hnsdow Ebv Repfx Af Tsg Distance vertical spindle – table min.: 100 mm Distance vertical spindle – table max.: 600 mm T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum table load: 400 kg Accuracy Repeatability: ±0.005 mm Positioning accuracy: ±0.005 mm

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Vertikalni rezkalni stroj TECNOMAX model ROUTER - Leto 2006 Hsdpfx Afox Rc Nco Tsng

Stanje: rabljeno, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Serial No. 16186651 Year of manufacture: 1986 Spindle mount: FEHLMANN SF32 Drilling capacity: Ø 30 mm in steel Thread cutting: up to M20 in steel Travel paths: X: 850 mm, Y: 435 mm Quill stroke (Z): 210 mm Vertical movement of milling head: 580 mm Feed rate X and Y: 1 to 8000 mm/min Feed rate Z: 1 to 4000 mm/min Rapid traverse X and Y: 8 m/min Rapid traverse Z: 4 m/min Clamping table area: 1570 x 500 mm Distance spindle nose – table: 130 - 720 mm Reach spindle – column: 450 mm Spindle speed: 50 - 7100 rpm, stepless Spindle drive: 10 kW Total power requirement: 20 kW Mains connection: 400 Volt, 50 Hz - HEIDENHAIN TNC 155 CNC control with TFT monitor - 3-axis control, X, Y, and Z (quill movement) - Hydro-mechanical tool clamping FEHLMANN SF32 - Thread cutting device - Cable remote control for machine operation and axis movements - Motorized vertical movement of the milling head with cutoff via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 holder - 20 tool holders FEHLMANN SF32 - Swiveling tool holder with 21 tool positions Hedshik Ezjpfx Af Tjng - Coolant system integrated in the machine base - Electrical cabinet mounted to the machine - Documentation: operating instructions, control manual and electrical diagrams Required space (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Very good condition

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Mikron WF 21 C Kratek opis: CNC orodjarska rezkalna naprava Opis: Takoj na voljo iz lokacije po zaprtju obratovanja: CNC orodjarska rezkalna naprava Mikron Tip WF 21 C Leto izdelave 1980 Hnsdpsx Scvfjfx Af Tsg Krmiljenje Heidenhain TNC 155 Miza 800 x 460 mm Pomiki X / Y / Z: 500 / 500 / 400 mm Vpenjalni stožec SK 40 Vrtljaji vretena 24 - 3150 obr/min Teža 2,2 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.100 mm, Vrtljiva miza 1.250 x 1.400 mm (ovira krog 1.700 mm) Hnedpfx Afsx Iucce Tog Heidenhain 530 Diagonalna rezkalna glava z indeksiranjem 1° x 1° Število obratov do 5.000 min⁻¹ Vpenjalni stožec SK50 Izmenjevalec orodij s 40 mesti Notranje hlajenje s 19 bari Transportni trak za odrezke v vzdolžni smeri

Stanje: dober (rabljeno), Leto izdelave: 1966, Omejevalnik za rezkalni stroj z natančno nastavitvijo Vrtliva miza Prečna žaga Podaljšek mize Aigner Hnsdjx U Dfgepfx Af Tog z dovajalno napravo Holz-Her ETZ, 8 hitrosti 380 Voltov

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine directly from the manufacturer. F110 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control is distinguished by its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool to tool: 2.5 seconds Travel Paths X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z axis: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Spindle speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Spindle to table distance: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / spacing: 18 mm / 3 / 100 mm Maximum load capacity: 400 kg Hnedpfsw Edbpox Af Teg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guideways with ball screws for high rapid traverse speeds on all axes Telescopic way covers on all three axes Automatic lubrication Portable electronic handwheel with enabling switch and emergency stop RJ45 port and 230 V power outlet Work light in the machining area Cleaning gun Ball screws and linear guides from THK Chip flushing Cooling at the spindle head (machining area) Electrical cabinet Arm-type tool changer SW24 CE compliant *More options available.

Stanje: pripravljen za uporabo (rabljen), CNC posteljna rezkalna stroj SECMU model C6 Velikost mize: 2200 x 700 mm Pomik X: 2000 mm Pomik Y: 1200 mm Pomik Z: 1000 mm ATC: 60 orodij Kompletno z univerzalno rezkalno glavo Hnodpfx Afsxdduwj Tjg

Stanje: rabljeno, Leto izdelave: 1984, vklj. Eumacop podajalno mizo Velikost mize: 1100 x 760 mm Višina mize: 870 mm Hitrost vrtenja: 3000/4500/6000/9000 obr/min Nastavitev višine: 120 mm Teža: ca. 700 kg Lokacija skladišča: Nattheim Hnedpfx Afsw E E Epe Tjg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Krmilna enota Znamka: BOSCH Model: OSA3 Hnsdox Tkabepfx Af Teg Glavni pogon Število osi: 4 Pomik Premik X-osi: 2000 mm Premik Y-osi: 500 mm Premik Z-osi: 500 mm Orodja Število mest za orodja: 48 Tip držala orodij: HSK63 Mediji Transportni trak za odrezke: Da Ta štiriosni portanski rezkalni stroj Matec 30 L je bil izdelan leta 1998. Izkoristite priložnost za nakup tega portanskega rezkalnega stroja Matec 30 L. Za več informacij nas kontaktirajte. Vrste aplikacij Rezkanje

Stanje: rabljeno, Leto izdelave: 1993,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Nigata 2 UMCN, l. 1990 x-hod 720 mm y-hod 340 mm z-hod 450 mm Velikost mize 310 x 1370 mm Razdalja navpična vretena / miza 50 - 450 mm Podajalne hitrosti - vzdolžno in prečno 20 - 800 mm/min Vertikalni podajalni obseg 9 - 355 mm/min Hitri pomik vzdolžno in prečno 3000 / 1375 mm/min Vpenjalna gred SK 50 Območje vrtljajev vretena 40 - 1750 obr/min Skupna priključna moč 5,5 kW Hodpfxox Dthae Af Teng Teža stroja pribl. 2,4 t Potrebni prostorski obseg cca. 1,9 x 2,0 x 1,5 m - robusten / zmogljiv CNC univerzalni rezkalni stroj - vključno z Fanuc krmilnikom OM - univerzalna rezkalna glava - avtomatski pomiki v oseh X/Z/Y - centralno mazanje - naprava za hlajenje - vrtljiva miza - zaščitna posoda proti brizganju - različna držala

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 200 HSC Premium CNC milling machine, direct from the manufacturer. F 200 HSC – The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. - Heavy-duty construction - High productivity - High reliability - Strongly ribbed, torsion-free machine base - Linear guide with recirculating rollers for high rapid traverse speeds on all axes - Powerful servo drives on all three axes - Telescopic guideway covers on all three axes - Automatic lubrication - Robust, precision-ground milling table with five T-slots, generously dimensioned and ground to high accuracy - Portable electronic handwheel with enable button and emergency stop facilitates program setup significantly - Coolant system with chip flushing and cleaning gun - Through-spindle cooling with 20 bar pressure - Belt-type chip conveyor for efficient chip removal - Chip cart - RJ45 connection and 230 V power supply - Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dust particles - Machine light in the work area - SIEMENS supplementary package with material defect liability and free OSS Plus online/on-site service - 1-year Basic maintenance contract included in Germany/Austria/Switzerland Milling Spindle Inline spindle Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Torque of drive motor S1 operation: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque of drive motor S6-30% operation: 125 Nm Hedpfew Ea Avex Af Teng Spindle taper: SK 40 / DIN 69871 Coolant system Coolant pump output, 3 units: 1 kW Delivery rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent empty slots): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel distances X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drives Rapid traverse X, Y, Z axis: 48 m/min Drive torque motor X/Y/Z: 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z: 5.34 kN / 5.34 kN / 6.68 kN Speed range Spindle speed: 12,000 rpm Pneumatics Air pressure: 6 – 8 bar Air consumption per hour: 6 – 8 kg/m³ Milling table Spindle-to-table distance: 100 – 650 mm Table size (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.600 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.400 mm, dolžina mize: 2.800 mm, širina mize: 3.100 mm, največja hitrost vretena: 20.000 obr/min, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, teža obdelovanca (maks.): 52.000 kg, nos vretena: HSK 63A, proizvajalec krmilnikov: Heidenhain, model krmilnika: 640, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, 5-AXIS GANTRY MILLING MACHINE PARPAS MOD. DIAMOND LINEAR 30 Heidenhain 640 CNC Control X-axis travel: 2,600 mm Y-axis travel: 3,000 mm Z-axis travel: 1,400 mm Feed rate: 60,000 mm/min Continuous orthogonal head (TOE29T) Hnodpfxjwzv Umo Af Tog C axis: +/- 370° A axis: +/- 110° Tool holder: HSK-63A Spindle speed: 20,000 rpm Spindle power: 37 kW Table dimensions: 3,100 x 2,800 mm Table load capacity: 6 t/m² Tool magazine: 60 positions Equipped with: - No. 2 chip conveyors - HR550FS handwheel USED MACHINE YEAR 2021

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 1.500 mm, Heidenhain 530 Hsdpfsx I A Hvjx Af Teng Diagonalna rezkalna glava z indeksacijo 2,5° x 2,5° Število vrtljajev do 6.000 min⁻¹ Orodno vpenjalo SK50 Notranje hlajenje 36 bar Transporter za ostružke v vzdolžni smeri + prečni transporter

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine offered directly by the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and durability. • Column-style cast iron construction for high rigidity • Carousel tool changer with eight tool stations • All linear guides fitted with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop system) • Maximum spindle speed 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool change operation is automatic or by push button (electropneumatic tool clamping system) • Solid, precise, large milling table with accurate surface finish • Extra-wide access doors to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS warranty extension and free on-site OSS service package included SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override Absolute encoder / no homing required • Higher accuracy Control System • 8.4” LCD color display, 800 x 600 resolution SIEMENS OSS package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and Weights Length approx. 2030 mm Width/Depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 10 kVA Horizontal Milling Table Length: 690 mm Width: 225 mm Vertical spindle – table distance min.: 90 mm Vertical spindle – table distance max.: 410 mm T-slot size: 14 mm Number of T-slots: 3 T-slot pitch: 63 mm Maximum table load: 150 kg Accuracy Repeatability: ± 0.015 mm Positioning accuracy: ± 0.015 mm Hnodsw Ea Swspfx Af Tog Pneumatic Connection Operating pressure: 6 bar Travel X axis (automatic): 330 mm Y axis (automatic): 220 mm Z axis (automatic): 320 mm Spindle-column distance min.: 280 mm Spindle-column distance max.: 280 mm Vertical Spindle Spindle taper: BT 30 Speed range: 10,000 rpm Continuous duty (S1) motor power: 3.7 kW Motor power S6-30% operation: 5.5 kW Continuous duty (S1) motor torque: 24 Nm Motor torque S6-30% operation: 36 Nm Feed Rates X axis: 15,000 mm/min Y axis: 15,000 mm/min Z axis: 15,000 mm/min Feed Motor Torque X axis (continuous S1): 3.5 Nm Y axis (continuous S1): 6 Nm Z axis (continuous S1): 6 Nm Tool Changer Type: Carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool change time (tool-to-tool): 7 s

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.270 mm, pomik po osi Z: 1.500 mm, Heidenhain 530 Diagonalna rezkalna glava z indeksiranjem 2,5° x 2,5° Število vrtljajev do 4.000 min⁻¹ Vpenjalo orodja SK50 Hsdpex I A Hiofx Af Teng Notranje hlajenje z 22 bari Transportni trak za ostružke v vzdolžni smeri

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F200 ECO Premium CNC milling machine, direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system sets itself apart through its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle belt drive Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 duty cycle: 9 kW Drive motor torque S1 duty cycle: 57 Nm Drive motor S6 30% duty cycle: 17.1 kW Drive motor torque S6 30% duty cycle: 118 Nm Spindle taper: BT40 Coolant system Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling precision Repeat accuracy: 0.008 mm Positioning accuracy: 0.004 mm Tool changer Hodsxyh Dbspfx Af Tsng Type: Double arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse, X/Y/Z axes: 48 / 48 / 48 m/min Motor torque X / Y / Z axis: 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z axis: 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 - 8 kg/m³ Milling table Spindle-to-table distance: 100 – 650 mm Table length x width: 1000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg Features • Linear guides with precision ball screws for high rapid traverse speeds on all axes • Telescopic way covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 and 230 V power connection • Machine light in work area • Cleaning gun • THK ball screws and linear guides • Chip flushing • Spindle head cooling (machining area) • Electrical cabinet • Arm-type tool changer • SW24 • CE *More options available

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. - All linear guides with stainless steel covers Hnsdpjw Ea R Hsfx Af Tsg - Automatic central lubrication - SIEMENS servo drive on all axes (open-loop control) - Max. spindle speed: 4000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency-stop slam switch. Greatly simplifies program setup - Tool changes by push button - Large access doors to minimize cleaning and maintenance time - Software package 'SINUMERIK 808D on PC' included (practical training software for offline programming and simulation of workpieces on PC; available for free download) SINUMERIK 808D ADVANCED – CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC system. The compact and user-friendly entry-level solution is used for basic milling applications. Features such as simple operation, commissioning, and maintenance make it the perfect foundation for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel with IP65 protection class, the SINUMERIK 808D ADVANCED is ideally prepared for operation in harsh environments. Its compact dimensions make it suitable for installation in smaller machines. INCLUDED - RJ45 Ethernet port - 8.4" LCD color display with 800 x 600 resolution - Remote maintenance ready Dimensions & Weights - Length: approx. 1410 mm - Width/depth: approx. 1372 mm - Height: approx. 2007 mm - Weight: approx. 1000 kg Drilling/Milling capacity - Max. cutter head size: 50 mm - Max. shank cutter size: 25 mm Electrical Data - Connection voltage: 400 V - Network frequency: 50 Hz - Electrical connection - Total connected load: 5 kVA Horizontal Milling Table - Length: 620 mm - Width: 180 mm - Distance vertical spindle – milling table min.: 50 mm - Distance vertical spindle – milling table max.: 295 mm - T-slot size: 12 mm - Number of T-slots: 3 - T-slot spacing: 50 mm - Maximum load capacity: 30 kg Accuracy - Repeatability: ± 0.02 mm - Positioning accuracy: ± 0.01 mm Coolant/Lubricant System - Coolant pump drive power: 95 W - Tank capacity: 30 l Travel - X-axis (auto): 355 mm - Y-axis (auto): 190 mm - Z-axis (auto): 245 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 4000 rpm - Note: max. spindle speed must be reduced by approx. 20% during continuous operation - Drive motor power S1 (continuous): 1.5 kW - Drive motor power S6-30% (intermittent): 2.2 kW - Drive motor torque S1 (continuous): 9.5 Nm - Drive motor torque S6-30%: 14 Nm Feed Rate - X-axis: 10,000 mm/min - Y-axis: 10,000 mm/min - Z-axis: 10,000 mm/min Feed Motor Torque - X-axis S1 (continuous): 1.9 Nm - Y-axis S1 (continuous): 3.5 Nm - Z-axis S1 (continuous): 3.5 Nm