Radialne Žage nakup rabljenega (4.183)

Stanje: pripravljen za uporabo (rabljen), skupna višina: 1.400 mm, skupna dolžina: 2.300 mm, skupna širina: 2.300 mm, globina grla: 260 mm, lastna masa: 2.000 kg, nazivna moč: 5 kW (6,80 KM), pokrov okrogel: premer 260 mm Fpjdpfexqr Urox Afljb pokrov kvadraten: 260 x 260 mm Največja višina obdelovanca: 260 mm Hitrost žage: 17–120 m/min Dolžina tračne žage: 4100 x 32 x 1,1 mm

Stanje: dober (rabljeno), Kapacitete: Kapaciteta 360 mm premera, pravokotno 704 x 360 mm pri 90 stopinjah ali 340 mm premera, pravokotno 400 x 340 mm pri 45 stopinjah. Priklop 415/3/50, približno 4 kW. Hitrosti 20–120 metrov na minuto. Zavojni okvir 0–45 stopinj. Primež se odpira do 710 mm. Merilna glava. Dovod/odvod z motoriziranimi valji. Dovod/odvod s križnimi transporti. Fpedpfx Aoig T Absfljb

Stanje: zelo dobro (rabljeno), Model kapne naprave Brodbaek TIP BCO 5/150 Že demontirana Prodaja po naročilu stranke Fodpexz R Ulsfx Afljpb

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. Fedpfxefg Rlcs Aflspb The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: dober (rabljeno), Tračna žaga PEHAKA HS-820/820 Dolžina: 10.700 mm Širina: 67 mm Fedotxlz Nspfx Aflepb

Stanje: novo, HSS circular saw blades for steel processing partly with side holes: 315 x 2.5 x 32 mm, 90 teeth 315 x 2.5 x 32 mm, 98 teeth 225 x 1.9 x 32 mm, 90 teeth Fedpfx Asc R Tyqeflepb

Stanje: pripravljen za uporabo (rabljen), skupna višina: 1.750 mm, skupna dolžina: 2.500 mm, skupna širina: 1.850 mm, globina grla: 310 mm, lastna masa: 1.160 kg, nazivna moč: 1,5 kW (2,04 KM), Behringer SLB240AG avtomatski CNC Fedexqr Uxspfx Aflspb Maksimalna višina obdelovanca: 260 mm Pomik mize: Ročni (1) -- hidravlični (2): hidravlični Hitrost žage: 16 > 120 m/min Dolžina tračne žage: 3.300 x 27 x 0,9 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 137, skupna širina: 2.800 mm, skupna dolžina: 700 mm, skupna višina: 1.700 mm, vrsta vhodnega toka: trifazni, Band saw blade grinding machine Risstaler riv Rivo 200 GA Year of manufacture: 1984 Fsdpfxjwd N Das Aflopb Different tooth profiles selectable Operating manual available Feed rate: 30 or 60 teeth per minute

Stanje: novo, Holzkraft minimax st 1g Saw-Spindle Moulder Combination (5501048) With tilting saw blade, fixed spindle moulder, and sliding table made of anodised aluminium. DESCRIPTION - Worktable made of heavily ribbed cast iron and base frame made of welded steel ensure torsional rigidity and vibration-free operation - Unique in this performance class: sliding table made of anodised aluminium for maximum cutting precision - Cutting plane directly at the saw blade - Tiltable saw blade from 90° to 45° - Squaring frame with aluminium crosscut fence and adjustable fence jaw for panels and large workpieces - Spindle moulder hood for profiling - Two independent motors for each working unit TECHNICAL DATA Dimensions and Weights Weight (net) approx.: 190 kg Extraction Connection Extraction duct diameter: 120 mm Extraction duct diameter, saw blade guard: 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Rated operating mode drive motor: S6 Duty cycle drive motor: 40% Drive motor power: 2 x 1.8 kW Sliding Table and Table Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle Moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000 / 7500 rpm Max. Cutter Diameter Max. cutter diameter: 160 mm Max. tenoning cutter diameter: 200 mm Circular Saw Unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 75 mm Fpedpfxekzkwuo Afljb Max. cutting height at 45°: 60 mm Max. saw blade projection at 90°: 67 mm Max. saw blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Made in Italy Official Holzkraft dealer – accessories available on request!

Stanje: novo, Electrical voltage: 400 / 440 V Frequency: 50 / 60 Hz Fpedped R Uzzofx Aflob Number of phases: 3 / 3 Ph

Stanje: novo, Bandsaw blade Brand: Röntgen Type: bi-alfa cobalt Dimensions: 4860 x 34 x 1.1 mm 3/4 Combi 10 Unused, from stock clearance Fjdpfx Aferwl R Neljpb

Leto izdelave: 1990, Stanje: rabljeno, številka stroja/vozila: 102-014-3150, Saw blade diameter: 400 mm Fodpsdbp Eqefx Aflspb Cutting range at 90° round: 130 mm Cutting range at 90° rectangular: 210 x 80 mm Mitre cutting range at 45° round: 130 mm Mitre cutting range at 45° rectangular: 160 x 80 mm Cutting speed: 11/22 m/min Space requirement: 2650 x 1450 x 1980 mm Weight: approx. 1100 kg

Stanje: pripravljen za uporabo (rabljen), skupna višina: 1.350 mm, skupna dolžina: 2.680 mm, skupna širina: 2.350 mm, globina grla: 500 mm, lastna masa: 1.800 kg, Popolnoma avtomatska tračna žaga z vpenjalnikom za snope in avtomatskim podajanjem CNC krmiljeno pozicioniranje kota širina obdelovanca v vpenjalniku za snope: 0-300 mm višina obdelovanca v vpenjalniku za snope: 5-300 mm enkratna dolžina podajanja materiala: 0-600 mm ponovljena dolžina podajanja materiala: 0-9999 mm maksimalna zmogljivost rezanja (90°, okroglo): 320 mm maksimalna zmogljivost rezanja (90°, pravokotno): 500 x 300 mm rez pod desnim kotom (45°, okroglo): 320 mm rez pod desnim kotom (45°, pravokotno): 310 x 310 mm rez pod desnim kotom (30°, okroglo): 200 mm Fpedpfx Afexbui Teljb rez pod desnim kotom (30°, pravokotno): 200 x 180 mm rez pod levim kotom (45°, okroglo): 320 mm rez pod levim kotom (45°, pravokotno): 300 x 230 mm Največja višina obdelovanca: 325 mm Hitrost žage: 18 > 115 m/min Dolžina tračne žage: 4200 x 34 x 1,1 mm

Stanje: novo, Cutting capacity at 90 degrees (round): 240 mm Cutting capacity at 90 degrees (square): 240 mm Cutting capacity at 90 degrees (rectangular): 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.4 t The Z252/DGH is equipped with: - Hydraulic semi-automatic operation - Double mitre, 60° left / 45° right - Emulsion pump - Machine base - Saw blade Fodpfsfgyh Hox Aflepb - 400V, 16A plug The machine is delivered fully assembled and ready for immediate operation.

Stanje: kot nova (razstavni stroj), Saw blade Brand: Wikus Dimensions: 3990 x 27 x 0.99 mm 5-8 TPI, S also suitable for Trennjäger model TEBA 310 GGA 9 pieces available Fedofhdwuepfx Aflepb

Leto izdelave: 1986, Stanje: dober (rabljeno), številka stroja/vozila: 120 603, Cutting capacity round: 250 mm Cutting capacity rectangular: 250 mm Saw blade dimensions: 3660 x 25 x 0.9 mm Blade speed: 20 - 70 m/min Fpedpfx Aof S Ilysfljb Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Fpsdsfn Andspfx Afljb Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Leto izdelave: 1986, Stanje: rabljeno, številka stroja/vozila: 1358, Cutting capacity round: 400 mm Fpsdpfx Afjbgnfyelob Cutting capacity rectangular: 400 mm Single feed length: 600 mm Saw blade dimensions: 6200 x 38 x 1.3 mm Blade speed: 12 - 100 m/min Saw drive: 380 V, 7.5 kW Required space: 2850 x 2100 x 1900 mm Weight: approx. 3000 kg

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I Fpedpjfg E Hlofx Afleb • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Leto izdelave: 1992, Stanje: rabljeno, številka stroja/vozila: 7375, Cutting length: 5000 mm Fpsdpfjz E Snjx Afljb Saw blade diameter: depending on requirements, 420 - 500 mm Space requirement: 6400 x 1400 x 1700 mm Weight: approx. 1600 kg

Stanje: novo, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Cutting area at 90 degrees (square): 220 mm Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Fpodpfxefgyh Ee Aflsb Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - automatic cutting - base frame - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Fodpfx Asfgyh Usflopb Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Band speed 18 – 100 m/min Table height 940 mm Fjdpfxjfgyiaj Afljpb Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion Fsdpefgyicefx Aflopb • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor Fpodped Iipxjfx Aflob - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system