Posmill C 1050 nakup rabljenega (12.608)

Stanje: zelo dobro (rabljeno), CTS Type: T-40/2000 Air-Cooled Temperature Test Chamber Technical Specifications: Refrigeration Unit: Air-cooled, low-noise, full hermetic design with stepless power adjustment via electronic monitoring and control system; environmentally friendly refrigerant R404A. Door: Fully openable, left-hinged door with one-hand operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Load per shelf: max. 35 kg Total maximum load (all shelves): 100 kg Test Chamber Lighting: 3x halogen lamp 20 W, 12 V Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of setpoint values Plain text error messages RS 232 interface Free relay outputs for user-provided test item control Temperature Range: -40°C to +180°C Gkodpfx Absup T Uqj Tef Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Cable port: nominal width 50 mm Control Panel Window: 570x710 mm Electrical connection, cable length: 5 m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate (acc. IEC 60068-3-5): Heating: 2.5 K/min Cooling: 1.5 K/min Heat Radiation: Approx. 2500 W at +20°C Approx. 2100 W at ±0°C Approx. 1500 W at -20°C Technical data specified for ambient temperature +25 °C, rated voltage 400V, without test samples, without radiant load, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: Power supply: 400 V +6/-10%, 3/N, 50 Hz Rated Power: 17.2 kW Protection class: IP 22 Condensate drain: gravity flow, R 1/2" internal thread Sound pressure level (per DIN EN ISO 3744, measured 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important Safety Information for Buyers! The following actions are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (Refer to image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Climats Type: EXCAL 1413-HA Air-Cooled Climate Chamber The EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD storage, Windows 7, and 2 USB ports, ensuring state-of-the-art technology. Technical Specifications: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Viewing window: 350 x 380 mm Chamber volume: 138 liters Feedthroughs included as standard: Gedpfx Ajv Dt T Tjb Tekf R1: 80 mm Ø L1: 80 mm Ø Data for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.8 K Rate of temperature change: Heating: 15 K/min Cooling: 10 K/min Data for climate testing: Temperature range: +10°C to +90°C Humidity range: 10 to 98% RH Operating data: 3/N/Ph+T 400V±10% 50 Hz Rated power: 9.8 kVA Refrigerants: R-404A / R-23 Weight: 430 kg For your safety as a buyer, please note the following information: The following procedures are carried out on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) If you have any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Type: HT 7010 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temporal temperature deviation: ± 1 K Spatial temperature deviation: ± 2 K Cabinet dimensions: Width 820 mm, Depth 840 mm, Height 1670 mm Interior dimensions: Width 550 mm, Depth 350 mm, Height 550 mm Nominal voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW, Rated current: 14.5 A Temperature range: -70°C to +180°C Gksdpfx Abshhyz Sj Tjf 2 x side ports, 9cm Weight: approx. 260 kg Refrigerants: R404A and R23 For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and information!) If you have further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Gkjdexugirjpfx Ab Tsf Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at center: ±1 to ±3 % RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Espec Type: PHP - J3 Technical Data: Air-cooled Gjdpfetzbzcjx Ab Tjkf Temperature and humidity range: Room temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your security as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Function test and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in the technical data and information reserved!) We would be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Type: PHP - J3 Gkjdpfx Astzbz Asb Tof Technical Specifications: Air-cooled Temperature and humidity range: ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your peace of mind as a buyer, please note the following information! The following procedures are carried out in advance on all our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak tightness test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Weiss temperature test chamber with S!MCON / 32 controller, water-cooled Control unit: "Touchpanel" All control and operation commands can be initiated simply by touching the function symbols on the 'touchpanel' control unit. Leveling feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to ensure adequate ventilation of the machine components. Godjrak Rmspfx Ab Tekf Access ports The test chamber is equipped with access ports on the right and left sides. Through these, measuring cables and test devices can be routed into the test chamber. Standard access ports installed: R1: DN 125 mm L1: DN 50 mm (Refrigerant converted to R-452A) Test space volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature test data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable volume: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation: max. 2500 W Operating data: Test chamber lighting: Halogen bulb, 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (customer-provided): 16 A, slow-blow Sound pressure level: Measured at 1m distance from the front, 1m height: 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) If you have any questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Weiss temperature chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control unit: Touch panel All control and operating commands can be activated on the touch panel simply by touching the function icons. Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs Feedthroughs are integrated into the right and left sides of the test chamber. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Gkodpferak S Dox Ab Tef Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature test specifications: Temperature range: -42 to +180 °C Temperature deviation over time at chamber center: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Operating data: Test chamber lighting: Halogen lamp 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, rated power 7.8 kW Customer-side fuse: 16 A slow-blow Sound pressure level: Measured at 1m distance from the front, height 1m: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following measures are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and specifications!) We will be happy to answer any further questions by telephone.

Stanje: zelo dobro (rabljeno), Weiss Type: WK-340/70 air-cooled Test chamber volume approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1805 mm, Width 780 mm, Depth 1700 mm Key data for temperature tests: Temperature range: -70 to +180 °C Temperature fluctuation over time: ±0.1 to ±0.5 K Temperature fluctuation spatially: ±0.5 to ±2.0 K Temperature change rate – Heating: 3 K/min Temperature change rate – Cooling: 2 K/min Key data for climate tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r.h. Temperature fluctuation over time: ±0.1 to ±0.3 K, spatially: ±0.5 to ±1 K Humidity fluctuation in the center of the usable chamber: ±1 to ±3% r.h. Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Connected load: approx. 4.1 kW Rated current: 14.0 A Sound pressure level: approx. 60 dB(A) Weight: approx. 500 kg Refrigerant: R404A / R23 For your safety as a buyer, the following information! The following measures are carried out on the chambers we offer prior to delivery: 1. Function check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information are excepted!) Gkedpfov Uap Nsx Ab Tsf If you have any further questions, we will gladly answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss climate test chamber. Model: SB2/500/80 Water-cooled Gkedpsm Tvzcsfx Ab Tof Cooling & heating range: -75°C to +180°C Climate range: +10°C to +95°C Humidity range: 10% to 98% relative humidity Temperature stability, temporal: ± 0.2K Humidity stability: ±1% r.h. Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Feed-throughs: Left side: ∅ 100 mm Right side: ∅ 50 mm Connection voltage: 400V / 3Ph+N+PE / 50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 For your security as a buyer, please note the following: The following steps are carried out in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a test run, monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch Temperature Chamber, water-cooled Test chamber volume: 110 liters Internal dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatial: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404A / R 23 Voltage: 1/N/PE AC 230V ±10% 50Hz Nominal power: 1.8 kW Nominal current: 12 A Model: VT 7011 For your assurance as a buyer, please note the following information! Godpfx Ajhrdy Seb Tokf The following procedures are carried out in advance on all chambers offered: 1. Functional check and replacement of necessary components 2. New charge with legally compliant refrigerant 3. After successful testing, the chambers undergo a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) (Specifications and technical details are subject to change and errors!) For any further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Feutron Type: 3416/17 Air-cooled Temperature Test Chamber Gsdpfx Asu E N Tisb Tjkf Test Chamber Nominal Volume: 280 liters Dimensions: Chamber exterior: Width 1540 mm x Height 2090 mm x Depth 1240 mm With fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test area: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Heated viewing window: Width 500 mm x Height 600 mm Installation dimensions of the temperature test chamber with doors open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthrough openings: 2 pieces, left side wall ∅ 100 mm Temperature range: -70°C to +180°C Heating: 3.0 K/min Cooling: 3.0 K/min Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Refrigerant: R507 / R23 Condition: used Scope of delivery: (See photo) (Subject to technical modifications and errors; specifications may change without notice!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Gsdpsklv H Isfx Ab Tjkf Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: zelo dobro (rabljeno), Here we offer a climate test chamber. Air-cooled Test chamber nominal volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range: +5 to +100 °C Gsdpfeiz Tqcox Ab Tekf Heating rate: 4.0 K /min Cooling rate: 0.6 K /min Climate range: +10 to +95 °C Humidity range: 10 to 95% r.h. Humidity variation over time: ≤ ± 3.0 Water supply for humidifier: Mains water or distilled water, 20 l storage tank Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a Important information for your safety as a buyer! The following procedures are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, we are happy to answer them for you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions: Chamber external: Width 1,540 mm x Height 2,090 mm x Depth 1,240 mm With fan motor and door removed: Width 1,540 mm x Height 1,940 mm x Depth 925 mm Test chamber interior: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm External dimensions with doors open: Width 2,340 mm x Height 2,090 mm x Depth 2,165 mm Feedthroughs: 2 pieces, side wall left, diameter 100 mm Temperature range -70°C to +180°C Heating rate: 3.0 K / min Cooling rate: 3.0 K / min Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Gjdeqxavajpfx Ab Tskf Type: 3416/17 Refrigerant: R507 / R23 Important information for buyers for your safety! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications and technical details subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature gradient: 1 to 4 K - Rate of change: * Cooling: 6.7 K/min * Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration points: +23°C and +80°C Performance for Climatic Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% Gsdpfxjxmhyco Ab Tekf - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test Chamber Dimensions (W x D x H): 580 mm x 765 mm x 750 mm External Dimensions (W x D x H): 870 mm x 1595 mm x 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important Information for Your Safety as a Buyer: The following procedures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data. All information is non-binding!) For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), Vötsch Vötsch Climate Test Chamber, Air-Cooled Converted to R-452a refrigerant Specifications for temperature testing: Temperature range: -40 °C to +180 °C Temporal accuracy: ±0.1 to ±0.5 K Spatial accuracy: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.2 K/min Cooling: 3.5 K/min Specifications for climate testing: Temperature range: -40 °C to +180 °C Temporal accuracy: ±0.1 to ±0.3 K Spatial accuracy: ±0.5 to ±1.0 K Humidity range: 10% to 98% r. h. Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Housing dimensions: Width 780 x Depth 1758 x Height 1800 mm Electrical connection: Rated voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 4.9 kW Rated current: 9 A Gedpjxbrkhofx Ab Tokf Refrigerant: R-452a Test chamber volume: approx. 335 liters Net weight: approx. 515 kg For your security as a buyer, please note the following information! The following procedures are performed on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and error!) For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, Water-Cooled Specifications for Temperature Tests: Temperature range: -70°C to 180°C Temporal temperature deviation at chamber center: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 11 K/min Cooling: 10.5 K/min Specifications for Climatic Tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98 %rH Temporal temperature deviation at chamber center: ±0.2 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at chamber center: ±1 to ±3 %rH Technical Data: Gksdjwynmxepfx Ab Tsf External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow measurement cables and test devices to be placed inside the chamber. 1 x R1 NW 125 mm 1 x L1 NW 50 mm Test Chamber Lighting Halogen bulb 24 V, 50 W 3/N/PE AC 400V ±10% 50Hz Rated power: 34.0 kW Rated current: 50.0 A Fuse (on-site required): 100 A slow-blow Max. heat output to environment: 2.2 kW Permissible test specimen weight: Total load on grating supports: 100 kg Chamber floor: 150 kg, insert shelf: 50 kg Refrigerant: R 404A / R 23 Weight: 1600 kg Important information for your safety as a buyer! The following steps are performed on our offered chambers before delivery: 1. Functional check and replacement of necessary components 2. If necessary, recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is conducted. Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: WK3-2200/40/5/V Weiss climate test chamber, water-cooled Specifications for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ±0.8 K Spatial: ±2.0 K Heat compensation: max. 8000 W Specifications for climate tests: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor panel Humidity range: 10 to 95 % r.h. Temporal temperature deviation: ±0.3 K Temporal humidity deviation: ±3 % r.h. Temperature uniformity: Spatial: ±1.0 K Heat compensation: max. 500 W Test room volume: 2160 liters Test room dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions lowered: Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions over shaker: Height 2710 mm External dimensions max. lift height: 3038 mm Changing floor dimensions: Width 1600 mm, Depth 1504 mm Operating data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Godpfxew I Rxro Ab Tokf Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow Refrigerant: R 404A Weight: approx. 2100 kg For your peace of mind as a buyer, the following is provided: The following checks and procedures are performed on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change and error!) Further questions? We are happy to assist you by phone.

Stanje: dober (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Specifications for Temperature Testing: - Temperature Range: -70 to +180°C - Temporal Temperature Deviation K: ±0.1 to ±0.5 - Spatial Temperature Deviation K: ±0.5 to ±2.0 - Temperature Gradient: 1 to 4 K - Change Rate: Cooling: 6.7 K/min Heating: 6.8 K/min - Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: - Temperature Range: +10 to +95°C - Temporal Temperature Deviation: ±0.1 to ±0.3 K - Spatial Temperature Deviation: ±0.5 to ±1.0 K - Temperature Gradient: 1 to 2 K - Humidity Range: 10 to 98% - Temporal Humidity Deviation: ±1 to ±3% - Dew Point Range: -3 to +94°C - Heat Compensation: 400 W - Climate Calibration Points: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Internal Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400V ±10%, 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Gkjdpfjxgd Rdox Ab Tof Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following procedures are performed in advance on our offered chambers: 1. Functional test and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data and specifications!) For further inquiries, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Tip: VT 3050 Sestavni deli / Preskusna omara, temperaturna komora Zračno hlajenje Prostornina preskusne komore: 500 litrov Temperaturno območje: -30°C / +100°C Časovna temperaturna nihanja: K ±0,5 Prostorska temperaturna nihanja: K ±1,5 Gsdpfx Ajw S E N Tob Tjkf Temperaturni gradient: K 3 Hitrost spremembe: Gretje K/min 2,0 Hlajenje K/min 1,4 Toplotna kompenzacija maks. W 650 Kalibracijske vrednosti: +23°C, +80°C Notranje mere preskusne komore: širina 710 mm, globina 590 mm, višina 1250 mm Zunanje mere: širina 940 mm, globina 1030 mm, višina 1955 mm Raven zvočnega tlaka db(A)

Stanje: zelo dobro (rabljeno), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Gkjdpewh Ttmofx Ab Tsf Temporal humidity deviation at center: ±1 to ±3 % RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Mytron drying oven. The WT 850 drying oven is designed for simultaneously drying multiple products or auxiliary devices in the semiconductor industry. Due to its robust construction (box section frame design) and the use of stainless steel material for the heating chamber, the WT 850 drying oven is universally applicable. The roll-in rack facilitates easy loading and unloading of the WT 850 drying oven. An exhaust nozzle with regulating damper allows the oven to be connected to a central extraction system. Technical data: - External dimensions: Width 1145 mm x Height 1880 mm x Depth 1810 mm - Heating chamber dimensions: Width 850 mm x Height 690 mm x Depth 1410 mm - Heating chamber volume: approx. 830 liters Gjdpfx Aboiwyiwo Tokf - Weight: approx. 230 kg, trolley 50 kg - Temperature range: 10°C above ambient up to +120°C - Spatial temperature uniformity: ± 1°C - Temporal temperature stability: ± 1°C - Power connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug - Power consumption: 4.5 kVA - Protection: 3 x 16 AT, 1 x 6 AT - Control: Digital controller - Safety feature: adjustable over-temperature protection Access ports: - Exhaust nozzle 100 mm with regulating damper (top) - Inlet nozzle 100 mm with regulating damper (top) Type: WT 850 Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and information!) We are happy to answer any further questions you may have by phone.

Stanje: rabljeno, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-Cooled (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98% RH Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as a buyer, please note the following information! The following measures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications may be subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone. Godpfx Absxb Dm Ie Tokf

Stanje: zelo dobro (rabljeno), Type: ClimeEvent C/340/70/3 Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Height 750 mm x Width 580 mm x Depth 450 mm Housing Dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate, cooling: 4.0 K/min Temperature change rate, heating: 3.2 K/min Specifications for Climate Testing: Temperature range: +10°C to +95°C Dew point range: -3 to +94°C Gksdpfx Abjxn Swue Tef Humidity range: 20% to 90% RH Temperature deviation over time in usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.0 K Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.1 kW Rated current: 14.0 A Refrigerants: R449A & R23 Test chamber volume: approx. 335 liters Weight: approx. 520 kg net Important Safety Information for Buyers: The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.