Polica Vozička nakup rabljenega (1.436)

Stanje: dober (rabljeno), Dvižni sistem, Megamat, 170kg na polico, cca 6m višine – rabljeno: Cena na lokaciji: 14.500.- € (neto), dodatno demontaža ipd. Proizvajalec: Megamat Tip: Megalift 14448/25/6010 Leto izdelave: 2000 Največja nosilnost na polico: 170kg Največja skupna nosilnost: 18.000kg Mere police: pribl. 2,45m x pribl. 0,80m Število polic: pribl. 40 kos Mere naprave: Višina: pribl. 6,01m Širina: 2,76m Globina: pribl. 2,70m 3/N/PE 230/400V 10A, varovalka 16A Stanje: dobro Na voljo: takoj Lokacija: BG-8800 Sliven Gjdpfxoyhxkms Ahmjbn

Stanje: rabljeno, Nedcon paletový regal pribl. 3,1 tm, rabljen 🧰 Lastnosti izdelka • Proizvajalec: Nedcon • Barva: modra • Stanje: rabljen, glej slike • Okvirji: 2 kosa predmontirana 500 x 105 cm • Širina okvirja: 10 cm • Prečke: 8 kosov s svetlo širino 290 cm • Varovanje: 16 kosov pocinkanih varnostnih zatičev • Pritrditev: 8 kosov Hilti betonskih sider • Nosilnost: 2.000 kg na nivo • Poljska nosilnost: 12.000 kg • Vložene police vključene! 💰 Cena: 440 € neto brez DDV. • Količinski popust: po dogovoru • Stroški pošiljanja: po vsej Evropi po dogovoru Godey D Nybopfx Ahmobn • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možno kadarkoli po dogovoru Stalno na zalogi več kot 5.000 tm paletnih regalov različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Glejte naše Splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm Gbedpfx Aheh R Taqsmsn - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) Gjdpfemhhypox Ahmebn - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. Gbsdpfx Ahomhh Dhsmsn We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm Gbedpfsmhh Dzox Ahmen - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Gbsdpsfdkb Tefx Ahmjn Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level. Gedpfx Aemhh Anshmsbn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Gbedpfxjguk A He Ahmen Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Godpfxeguk Dkj Ahmebn - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. Gbsdpfx Aemhhy Nshmjn The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Gbodpfoguk Dvsx Ahmjn Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Godpfomhh Dtsx Ahmsbn - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.700 mm, skupna višina: 3.000 mm, Za prodaju je visokokvalitetan i izuzetno stabilan sistem teških regala marke Katschotec. Regal je idealan za profesionalno skladištenje alata, mašina, kutija, rezervnih delova ili teških materijala – i za privatnu i za komercijalnu upotrebu. Gbedpfjzabkisx Ahmen Tehničke specifikacije: - 3 stabilna stojeća rama - Dimenzije rama: oko 300 cm visina x 110 cm dubina - 16 robusnih traversa - Dužine polica: moguće kombinacije 180cm x 270cm - Dozvoljena nosivost po polici: 3.000 kg - Dozvoljena ukupna nosivost po polju: 9.000 kg - Masivna industrijska verzija - Velika nosivost po nivou - Pocinčana, odnosno izdržljiva metalna konstrukcija - Idealno za magacin, radionicu, podrum, garažu ili arhivu. Regal je u dobrom polovnom stanju sa uobičajenim tragovima korišćenja. Tehnički je potpuno ispravan i odmah spreman za upotrebu. Regal je već demontiran.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.049 h, nosilnost: 2.500 kg, dvižna višina: 122 mm, težišče tovora: 575 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.400 mm, napetost baterije: 24 V, dolžina vilic: 1.150 mm, lastna masa: 443 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION. Our forklifts are technically reconditioned in accordance with FEM 4.004 and the latest safety standards – for maximum quality and your safety. From the chassis to the battery, including drive unit, brakes, steering, and electrics – every vehicle is thoroughly inspected and refurbished. ✅ Made in Germany – with responsibility and precision ✅ Rigorous technical inspection ✅ 400+ vehicles available ✅ Worldwide shipping & customs clearance Gbedey Rq Sfopfx Ahmsn ✅ Service & spare parts at fair prices ✅ Personalized support – even after purchase Test on site now and receive personal advice – we will find the right solution for you. Industrial Truck Data: - Manufacturer: Jungheinrich - Model: Pedestrian Pallet Truck ERE 125 - Drive Type: Electric - Load Capacity: 2,500 kg - Year of Manufacture: 2018 - Operating Hours: 2,049 - Lift Height: 122 mm - Mast Type: None - Initial Lift: Yes - Overall Height: 1,400 mm - Fork Length: 1,150 mm - Unladen Weight: 443 kg - Load Center: 575 mm - Tyres: Polyurethane - Model Type: ERE 125 - Battery Type: PzS - Voltage: 24 V - Battery Weight: 288 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, obratovalne ure: 5.306 h, nosilnost: 2.500 kg, dvižna višina: 122 mm, težišče tovora: 600 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.400 mm, napetost baterije: 24 V, dolžina vilic: 1.150 mm, lastna masa: 578 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✅ Made in Germany – with responsibility and precision ✅ Strict technical inspection ✅ 400+ vehicles available Gbodpfx Ahsy Rq Itomen ✅ Worldwide shipping & customs clearance ✅ Service & spare parts at fair prices ✅ Personal support – even after purchase Test on site now and get expert advice – we will find the right solution for you. Industrial Truck Specifications: • Manufacturer: Jungheinrich • Model: Low-lift Pallet Truck ERE 225 • Drive type: Electric • Capacity: 2,500 kg • Year of manufacture: 2016 • Operating hours: 5,306 • Lift height: 122 mm • Mast type: None • Initial lift: Yes • Overall height: 1,400 mm • Fork length: 1,150 mm • Unladen weight: 578 kg • Load centre: 600 mm • Tyres: Polyurethane • Model type: ERE 225 • Battery type: PzS • Voltage: 24 V • Battery weight: 298 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, obratovalne ure: 5.365 h, nosilnost: 2.500 kg, dvižna višina: 122 mm, težišče tovora: 1.200 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.400 mm, napetost baterije: 24 V, dolžina vilic: 2.400 mm, lastna masa: 740 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – to ensure maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and restored. ? Made in Germany – with responsibility and precision ? Strict technical inspection ? 400+ vehicles available ? Worldwide shipping & customs processing ? Service & spare parts at fair prices Gbsdpfx Ahjy Rq E Ejmen ? Personal support – even after purchase Test on-site now and receive advice – we will find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Low-lift Pallet Truck ERE 225 Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2017 Operating hours: 5,365 Lift height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 2,400 mm Unladen weight: 740 kg Load centre: 1,200 mm Tyres: Polyurethane Model type: ERE 225 Battery type: PzS Voltage: 24 V Battery weight: 298 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, obratovalne ure: 5.713 h, nosilnost: 2.500 kg, dvižna višina: 122 mm, težišče tovora: 600 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.400 mm, napetost baterije: 24 V, dolžina vilic: 1.150 mm, lastna masa: 790 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically overhauled in accordance with FEM 4.004 and all current safety standards – ensuring maximum quality and your safety. From chassis to battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & genuine spare parts at fair prices ✔ Personal support – even after purchase Gbedey Rq Dzepfx Ahmon Test and consult on site now – we’ll find the right solution for you. Industrial Truck Data: - Manufacturer: Jungheinrich - Model: Low-lift Pallet Truck ERE 225 - Drive: Electric - Capacity: 2,500 kg - Year of manufacture: 2016 - Operating hours: 5,713 - Lift height: 122 mm - Mast type: None - Initial lift: Yes - Overall height: 1,400 mm - Fork length: 1,150 mm - Unladen weight: 790 kg - Load centre: 600 mm - Tyres: Polyurethane - Model designation: ERE 225 - Battery type: PzS - Voltage: 24 V - Battery weight: 298 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, obratovalne ure: 10.802 h, nosilnost: 2.500 kg, dvižna višina: 122 mm, težišče tovora: 575 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.400 mm, napetost baterije: 24 V, dolžina vilic: 1.150 mm, lastna masa: 559 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are fully refurbished according to FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From chassis to battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ? Made in Germany – with responsibility and precision ? Rigorous technical inspection ? 400+ vehicles available ? Worldwide shipping & customs handling ? Service & spare parts at fair prices ? Personal support – even after purchase Test on site now and receive expert advice – we will find the best solution for you. Industrial truck specification: Manufacturer: Jungheinrich Model: Low Lift Pallet Truck ERE 225 Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2021 Operating hours: 10,802 Gjdpfx Ahsy Rq A Dsmebn Lift height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 559 kg Load centre: 575 mm Tyres: Polyurethane Model type: ERE 225 Battery type: Lithium-ion Voltage: 24 V Battery weight: 190 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, obratovalne ure: 2.638 h, nosilnost: 2.000 kg, dvižna višina: 750 mm, težišče tovora: 600 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.400 mm, napetost baterije: 24 V, dolžina vilic: 1.200 mm, lastna masa: 404 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are reconditioned to FEM-4.004 and the latest safety standards – ensuring top quality and your safety. From chassis to battery, including drive, brakes, steering, and electrics – every unit is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Come for a local test and consultation – we will find the right solution for you. Industrial truck specifications: Manufacturer: Jungheinrich Model: Low-lift Pallet Truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2015 Operating hours: 2,638 Lift height: 750 mm Mast type: None Free lift: No Initial lift: Yes Overall length: 1,850 mm Overall width: 730 mm Overall height: 1,400 mm Fork length: 1,200 mm Gjdoy Rpdmjpfx Ahmsbn Unladen weight: 404 kg Load centre: 600 mm Tyres: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24V Battery weight: 155 kg Charger: Integrated charger

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, obratovalne ure: 5.580 h, nosilnost: 2.500 kg, dvižna višina: 122 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.300 mm, dolžina vilic: 1.150 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH DEDICATION, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers, fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (safety regulations). Over 350 vehicles in stock Custom modifications of any kind upon customer request International transport with suitable vehicles and customs clearance available upon request See for yourself and visit us at our facility. Godpfjy Rm E Usx Ahmebn Friedmann Forklifts – Our Quality Commitment Full functionality in accordance with FEM-4.004 Maintained & tested (C5-Test) battery for electric units (min. 70% capacity)

Stanje: dober (rabljeno), Leto izdelave: 2006, Approx. 100 bays of stable boltless shelving units, Gemac; this system works without cross braces. Frame height: 2.48 m or 2.31 m, shelves: 1.20 m x 1.30 m, 130 kg per level – used: Gbsdpfjy D Tm Sox Ahmon Price per bay ex location: only €95 (net), dismantled, packed and loaded! Price for a minimum of 100 bays: Per bay ex location: only €85 (net), dismantled, packed and loaded! Manufacturer: Gemac Type: should be Normaflex Year of manufacture: 2006 Frame height: approx. 2.48 m Bay depth: 1.20 m Bay width: approx. 1.31 m (including the frames, two bays are approx. 2.74 m wide) Shelves: Shelf load per level: 120 kg Bay load: 850 kg Shelves per bay: 6 including top shelf, which can also be used for storage The 6 shelves/levels consist of 3 large continuous shelves and 3 levels with narrower shelves (which together form a large surface) Shelf lift-out safety locks would need to be purchased new if required by the buyer – usually, they are not necessary (the plastic safety locks tend to break during dismantling – but there are metal types available as new products) Feet are plugged in and fastened with one screw each The top shelf is screwed to the next frame or shelf with a connector plate (all other parts are plugged in); thanks to this and the 3 large shelves with reinforcements, no cross braces or similar are required Available: approx. 100 bays immediately, suitable for assembly in 25 x 4 bay units Condition: good to very good Location: D-77749 Hohberg

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks Gjdoh Izr Uepfx Ahmsbn 2300x1000x95 mm, 2 ks Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. K dispozici další příslušenství jako např.: Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: dober (rabljeno), Okvirji: 8860x1050x80 mm 34 kosov 3000*1050 mm 7 kosov Gjdpfx Ahod Hbqnjmobn Prečke: 1860*75*45 mm (2800 kg/polica) 352 kosov 2760*115*40 mm (2400 kg/polica) 26 kosov 2700*100*50 mm (2400 kg/polica) 22 kosov Možen je tudi nakup delnih količin. Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatne opreme, z veseljem pa vam pomagamo pri načrtovanju. Priprava individualne ponudbe je za nas samoumevna. Dostava: Prosimo, povprašajte za stroške prevoza tako, da navedete vašo poštno številko, kraj in želeno količino artiklov.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0729389557300, nosilnost na odsek shranjevanja: 160 kg, skupna dolžina: 162.000 mm, skupna višina: 2.500 mm, višina police: 2.500 mm, dolžina police: 162.000 mm, višina okvirja: 2.500 mm, obremenitev na par nosilcev (maks.): 160 kg, širina okvirja: 600 mm, število vrst polic: 23, 11 dvojnih vrst + 1 posamezna vrsta policnega regala, sendzimir pocinkan, vsak s 7,03 m dolžine, 2,5 m višine, 0,6 m globine, vsak s 7 polji s čisto širino 0,97 m. Vsako polje ima 7 polic, nosilnost police je 160 kg. Gbsdpfxeyy I Enj Ahmsn - 184 okvirjev (FR25060) predmontiranih 2500x600 - 1127 polic (FB097604) 970x600x40 - 88 spojkov za dvojne vrste (FBDV-Set) - 22 dvojnih križnih vez (VK2510) - 23 oznak za nosilnost (BSMcP) Okvirji so predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - dobava po celotnem območju Republike Nemčije, razen otokov! Dostava v države EU po individualnem dogovoru.