Pogonsko Ročico nakup rabljenega (514)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 Lhodpfx Abovrcqdjbsb >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Schaublin 150 High Precision Lathe with 2-Axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3,000 rpm >> Rapid traverse motor: 1,500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> 160 mm three-jaw chuck, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck with collets >> Change gears >> Stops >> Coolant system >> 1 box of reversible jaws >> Centre points >> Operating manual Lodjwynluopfx Abbohb About the Machine: For sale is a Schaublin 150 high-precision lathe. The machine runs, features a rapid traverse, and is in good used condition. Take advantage of the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Ljdpsvrckqofx Abbohb Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 Lodov Tyzcspfx Abbjhb >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch Lhodpfx Absvv Etvjbob >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Specifications: >> Year of manufacture: approx. 2000, Machine no. D3F H1 010 >> Centre height: 170 mm >> Swing diameter over bed: 340 mm >> Swing diameter over cross slide: 190 mm Lodpfowvuf Tox Abbohb >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock: Morse taper 3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Space requirements: approx. length 1.600 x depth 0.9 x height 1.3 meters >> Weight: approx. 730 kg Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Functions: Metric/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 positions), taper calculation, radius/diameter, rapid zeroing, count direction switching >> 1 piece 3-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: Offered is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in excellent condition. The machine is naturally fully functional. The bedways are in very good condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 Lhodpfx Aevambcobbeb >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Technical Data: >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders Lhjdpfx Abovrdlcebsb >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction Lhodewrm Dtjpfx Abbeb >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of Manufacture: 1986 >> Machine No.: 86-160-348 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 8 steps, from 96 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev Lhedpfxewthbio Abbsb >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix toolpost size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: Lhedpfx Aswag Stebbob >> Year of manufacture: 1995 >> Center height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Tailstock quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint/installation dimensions approx.: length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis position display >> 1 piece 3-jaw chuck with 1 set of jaws >> Toolholder with 3 pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, used very little. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in excellent condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: novo, lastna masa: 3.370 kg, največja dovoljena obremenitev: 15.130 kg, skupna masa: 18.500 kg, konfiguracija osi: 2 osi, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/65R22,5, velikost zadnje pnevmatike: 385/65R22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Za izmenljive nadgradnje 7,15 / 7,45, višine odlaganja cca. 1.220 mm do 1.320 mm, nakladalna ploščad Bär 1,5 t zlagljiva pod vozilo in prehodna plošča, vklj. škatla za baterije in baterije, sprednja podpora z ročico in menjalnikom, zadnja podpora z ročico in menjalnikom. Pridržujemo si pravico do tiskarskih napak, sprememb in sprememb. Vzorčne slike. Več podatkov na: !, Več podrobnosti: ! Lhedpsx Tamwefx Abbob

Stanje: rabljeno, Leto izdelave: 1975, Premer struženja nad ležiščem: 380 mm Premer struženja nad suportom: 215 mm Dolžina struženja: 1250 mm Ledpfeycxf Aox Abbshb Vretenasta odprtina: 41 mm Širina ležišča: 340 mm Število stopenj vrtljajev vretena: 12 Vrtljaji vretena: 14-2800 min⁻¹ Skupna potreba po moči: 6 kW Teža stroja cca.: 1,85 t Prostorske mere cca.: 3 x 1 x 1,35 m Prodaja po akcijski ceni neposredno iz tovarne! Gre za rabljeni stroj, zato prodajamo brez kakršnekoli garancije. TRGOVEC Z ZALOGO IN RAZSTAVNO DVORANO.

Stanje: rabljeno, L + Z stružnica WAFUM tip TUD 40 Št. št.: 35689 Leto izdelave: 1975 Razdalja med konicama: 1500 mm Premer struženja nad posteljo: Ø 440 mm Višina konice nad posteljo: 220 mm Višina konice nad suportom: Ø 125 mm Vrtina vretena: Ø 56 mm Hitrost vretena: 18 - 1800 min⁻¹, 36 stopenj Prirobnična prirobnica: kratek stožec DIN 55027, velikost 6 Notranji stožec konjička: MK 5 Pogonska moč: 4 in 6,7 kW Lhodpfx Absw Uf Hwsbsb - Hitrost vretena preko 2 motornih hitrosti in 18 stopenj menjalnika - 3-čeljustna vpenjalna glava Ø 315 mm BISON z 2 kompleti čeljusti (obračalne in vrtalne) - Hitromenjalni nosilec orodja MULTIFIX velikost B z 2 izmenljivima kasetama - Fiksna luneta z drsnim ležajem, notranji Ø 125 mm - Sledilna luneta z drsnim ležajem, notranji Ø 100 mm - Vodilo za struženje ozkih stožcev z avtomatskim vzdolžnim podajanjem - 1 kos sledilne centrirne konice - Dvignljiv zaščitni pokrov vpenjalne glave Prostorske zahteve D x Š x V: 3100 x 1200 x 1450 mm Teža: 3000 kg Dobro stanje

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Ledpjrtd Uwefx Abbohb Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Colchester Student 2500 Lodpfx Aow R S Awobbjhb 3-osni digitalni prikaz Vpenjalna naprava za vpenjalne tule Razni dodatki

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2019, Leto izdelave: 2017, Oprema: ABS, KRONE ZZ centralnoosna prikolica za zamenljive nadgradnje 7,82 m EDSCHA | JUMBO | MEGA | TANDEM - Sprednja podporna noga z ročico in menjalnikom - 2 osi, vsaka z nosilnostjo 9.000 kg - Medosna razdalja: 1.810 mm - BPW agregat z zračno vzmetenjem - Z dvigalnim in spustnim mehanizmom - Priključki za zavorne in električne kable na desni strani v smeri vožnje Lhsdpfx Abex T Iimsbeb Nakupna cena: 4.900 € neto + DDV Brez garancije, brez jamstva, brez vračila. Vmesna prodaja, napake in tiskarske napake pridržane. Informacije za izvoz: Znesek računa brez DDV plus depozit v višini nemškega DDV (19 %). Povračilo depozita se izvede po predložitvi registracijske dokumentacije ali izvozne potrditve.

Stanje: dober (rabljeno), Obseg po slikah. Hitrost vrtenja brezstopenjsko nastavljiva od 15 do 3.000 vrt/min. Pogon: 2,2 kW. Ledpfx Asx U D D Ajbbehb

Stanje: dober (rabljeno), Prodajam stružnico Colchester Triumph 2500, ki je popolnoma delujoča in pripravljena za uporabo. Stružnica je opremljena z digitalnim prikazovalnikom Fagor ter ima črpalko za hladilno-mazalno sredstvo, nameščeno pod koritom za ostružke. Tehnični podatki: Višina konic: 167 mm, Razdalja med konicama: 635 mm, Premer struženja nad posteljo: 330 mm, Premer struženja nad prečnim suportom: 210 mm, Vrtina vretena: 40 mm, Pogonska moč: 2,2 kW. Vključeni so 15 držal orodij, valjčna konica in noge stroja. Nakladanje predstavlja težavo. Ledoxw N I Njpfx Abbjhb

Stanje: rabljeno, L + Z stružnica WEILER tip Condor 81 A Stroj. št.: 36553 Leto izdelave cca 1985 Razdalja med konicama: 750 mm Premer struženja nad posteljo: 330 mm Višina konice nad posteljo: 165 mm Premer struženja nad suportom: 180 mm Višina konice nad suportom: 90 mm Premer vretena: 40 mm Priklop čeljusti: kratki stožec DIN 55027 št. 5 Konica v konjičku: MK 3 Pomik puše konjička: 110 mm Hitrost vretena: 45 - 2800 vrt/min, 16 stopenj Pogonska moč: 3 kW Omrežni priklop: 400 Volt, 50 Hz - Hitrost vretena v 16 prestavah - 3-čeljustna stružna glava Ø 160 mm RÖHM z vrtalnimi in stružnimi čeljustmi - Hitromenjalni nosilec rezila Multifix velikosti B s 3 vložki - Avtomatski vzdolžni in frontalni pomik - Elektromehanska zavora vretena - Nujna zaustavitev - Rezervoar za hladilno tekočino s črpalko v podstavku stroja, brez napeljave do delovnega območja - Zložljiv varnostni pokrov čeljusti - Zaščita pred brizganjem - 1 kos vrtljiv centrirni koničnik - Električna shema in navodila za uporabo Mere D x Š x V: 1850 x 950 x 1400 mm Teža: 1100 kg Dobro stanje Lhodpfx Abek S Ht Aobsb

Stanje: dober (rabljeno), 3-jaw chuck Multifix quick-change toolpost Tailstock Lhodpfx Absig H Hwebsb Technische Daten / technical details: Center distance / center to center: 650 mm Swing over bed / turning diameter over bed: 330 mm Swing over cross slide / turning diameter over sledge: 190 mm Spindle bore: 36 mm Spindle speed range: 30–2500 rpm Drive power / drive capacity: 2.2 kW Machine weight approx.: 600 kg Technical data, accessories, and machine description are not binding.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 190 mm, premer struženja: 330 mm, širina na sredini: 650 mm, 3-jaw chuck steel tool holder tailstock Lhedpfx Aowtx A Dsbbob Technical data: Center distance 650 mm Turning diameter over bed 330 mm Turning diameter over carriage 190 mm Spindle bore 36 mm Spindle speed range 30–2500 rpm Drive power 2.2 kW Machine weight approx. 600 kg Technical data, accessories, and machine description are not binding.

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 160 mm, izvrtina vretena: 36 mm, premer struženja: 300 mm, višina središča: 150 mm, širina na sredini: 500 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna višina: 1.300 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 15 obr/min, skupna masa: 1.000 kg, Konvencionalni precizni stružni stroj z vpenjalno napravo za klešče, višina konic 150 mm, razdalja med konicama 500 mm, premer izvrtine Ø 36 mm, 18 hitrosti vrtenja 15 - 3550 min⁻¹, motor 3 kW, oprema: naprava za hlajenje, vpenjalna naprava za klešče, 3-čeljustna glava, vrtalna glava, stružni konjiček, hitromenjalni držalo RAPID s 5 vložki, strojna svetilka, vzdolžni prislon, mere 150x80x130 cm, teža ca. 1000 kg. Lhodpfxsx Urmls Abbeb

Stanje: novo, Leto izdelave: 2025, Premer reza 1100 mm Dolžina tračnega lista 12000 x 67 mm Lhsdpfxjuddc Hs Abbjb Širina reza 1,6 mm Območje reza pri 90° - okroglo 1100 mm Območje reza pri 90° - pravokotno 1100 x 1100 mm Območje reza pri 90° - kvadratno 1100 x 1300 mm Skupna potrebna moč 7,5 kW / 3100 Nm Teža stroja ca. 12.000 kg Potrebni prostor ca. 3300 x 3000 x 5300 mm KSS 1100 X 1300 je polavtomatska in stebrično vodena horizontalna tračna žaga. Stroj je dodatno opremljen s pogonsko valjčno mizo, dolgo 1 meter.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer struženja: 290 mm, stružna dolžina: 750 mm, skupna dolžina: 1.400 mm, skupna širina: 700 mm, skupna višina: 1.030 mm, največja hitrost vrtenja: 1.800 obr/min, nosilec vretena: MK 3, The following features and characteristics make the G2930 combination lathe unique and competitive on the market: 1. V-shaped guideways offer higher stability and are securely anchored. 2. The gearbox is fixed for maximum rigidity and provides comprehensive feed and thread-cutting functions. 3. State-of-the-art tapered roller bearings support the D1-4 spindle with the highest precision. 4. Automatic vertical feed enables maximum threading capabilities. 5. Cross-slide is equipped with T-slots. 6. Guideways are effectively controlled by adjustable jaws. 7. Advanced gearbox design with maximum functionality. 8. Maximum working range thanks to the lowered bed section. 9. Carriage-mounted spindle is controlled via a lever arm. 10. Two feed screws are integrated. 11. User-friendly forward/reverse interface with zero backlash. 12. Versatile tailstock, which can be offset for taper turning. 13. Emergency stop switch, load switch, process control, etc. are installed. TECHNICAL DATA Lhedpfxexb Up To Abbjb Max. turning diameter over bed: 290 mm Max. turning diameter over cross slide: 165 mm Distance between centers: 750 mm Spindle taper: MT5 Spindle bore: 38 mm Max. tailstock quill travel: 80 mm Tailstock taper: MT3 Longitudinal carriage travel: 560 mm Cross-slide travel: 140 mm Compound slide travel: 80 mm Cross feed: 0.017~0.25 mm/rev, 15 steps Longitudinal feed: 0.07-1.0 mm/rev, 15 steps Metric threads: 0.2-3.5 mm, 18 steps Inch threads: 8-56 TPI, 21 steps Spindle speed range/levels: 50~1800 RPM, steplessly adjustable Motor output: 1.5 kW Further dimensions and weight: Overall dimensions: 1400 x 700 x 1030 mm Packing dimensions: 1450 x 750 x 970 mm Net weight: 290 kg Gross weight: 310 kg