Servo Pogoni nakup rabljenega (4.648)

Stanje: rabljeno, B&R Acopos 1090 Servo Drive 8V1 removed from Engel Robot ERC-6510-E Hodsiyzwwepfx Af Tsng - Removed from an operational machine - Fully functional Manufacturer: B&R Model: 8V1090 Manufacturer No.: 8V1 Spare part No.: Please ensure before purchasing that the Acopos you require also has a 12-pin green connector. If the spare part is traded on an exchange basis, a partial credit will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse credit based on the condition or age of the returned part. The defective part must be in repairable condition; credit will be issued upon feedback from the manufacturer. Condition: used

Stanje: rabljeno, B&R Acopos 1045 Servo Amplifier 8V1 removed from Engel Robot ERC-6510-E - Removed from an operational machine - Fully functional Manufacturer: B&R Model: 8V1045 Manufacturer No.: 8V1 Spare part No.: Please ensure before purchase that the Acopos you require also has a 12-pin green connector. If the spare part is handled via an exchange procedure, a partial credit will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit due to the condition or age of the returned part. The defective part must be in a repairable condition; the credit will be issued following manufacturer feedback. Condition: used Hnjdpoiyzw Eofx Af Tjg

Stanje: rabljeno, SANYO SANMOTION servo drive for Y-axis – with firmware for the Y-axis - Removed from Wittmann W721 - Refurbished Hnjdpfxet Sbfij Af Teg 3-month warranty: This is provided exclusively following inspection by the manufacturer. Processing is carried out by Complast GmbH. Manufacturer: SANYO Type: QS1A03AA Condition: refurbished

Stanje: rabljeno, B&R Acopos 1016 Servo Amplifier – removed from Remak RX43 - Removed from a running machine - Fully functional Manufacturer: B&R Type: 1016 Manufacturer No.: 8V1 Rev. H0 Please ensure before purchasing that the Acopos unit you require also has an 18-pin grey connector. Hnsdorr Egaopfx Af Tsg If the spare part is supplied on an exchange basis, a partial credit will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse the credit depending on the condition and/or age of the returned part. The defective part must be repairable; the credit will be issued upon feedback from the manufacturer. Condition: Used

Stanje: rabljeno, B&R / 8V1 Acopos 1022 servo amplifier – refurbished - 3-month warranty: This is provided exclusively based on manufacturer inspection. Processing is carried out by Complast GmbH. - Removed from an operational machine - Fully functional Manufacturer: B&R Type: 1022 Manufacturer No.: 8V1 Please ensure before purchasing that the Acopos you require also has a 12-pin green connector. Hodpfx Afep Rb Iae Teng If the spare part is traded on an exchange basis, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition and/or age of the returned part. The defective part must be in repairable condition; the credit note will be issued after confirmation from the manufacturer. Condition: refurbished

Stanje: novo, Leto izdelave: 2025, PROFESJONALNY PODAJNIK DRUTU Z SILNIKIEM SERWO AC DO SPAWANIA LASEROWEGO I TIG Profesjonalny podajnik drutu Citronix z technologią serwo – wyposażony w silnik serwo napięcia przemiennego (AC), co umożliwia niezwykle precyzyjne podawanie drutu, nawet przy bardzo niskich prędkościach. Urządzenie pozwala również na ustawienie długości wycofania drutu w milimetrach, a po ostygnięciu materiału możliwe jest ponowne, precyzyjne podanie drutu (najmniejszy krok 0,1 mm). Hodpfx Aemk S Slef Teng To bardzo istotna funkcja podczas spawania laserowego i stanowi wyraźną przewagę nad podajnikami z Dalekiego Wschodu, gdzie funkcja wycofania i podania drutu jest ustawiana czasowo, a tym samym końcówka drutu nigdy nie wraca dokładnie do pozycji początkowej. Podajnik Citronix zaprojektowany został tak, aby mógł kontrolować nie tylko samo podawanie drutu, ale także zarządzać (włączać i wyłączać) zarówno źródłem lasera, jak i zaworem magnetycznym gazu. To kolejna istotna różnica i przewaga względem innych producentów, gdyż zazwyczaj w spawarkach laserowych nie ma technologii spawania punktowego. Jeśli więc ktoś chce stosować metodę spawania punktowego blach, może ustawić czas spoiny punktowej, a podajnik będzie sterował źródłem lasera. Podajnik oferuje 4 technologie pracy: 1. spawanie ciągłe z podawaniem drutu, 2. spawanie ciągłe bez podawania drutu, 3. spawanie punktowe bez podawania drutu, Podajnik posiada 200 komórek pamięci – ustawione parametry można zapisać pod dowolną nazwą tekstową lub liczbową, co znacznie ułatwia obsługę. Opracowaliśmy również opcjonalny pedał nożny, który może być podłączony do podajnika i regulować prędkość podawania. Działa to na zasadzie pedału gazu w pojeździe. Gdy ustawimy maksymalną prędkość podawania na przykład na 10 metrów na minutę i wciśniemy pedał do końca, uzyskamy właśnie tę prędkość; naciśnięcie do połowy – połowę wartości zadanej. Funkcjonalność ta szczególnie sprawdzi się, gdy operator pracuje stacjonarnie (np. w pozycji siedzącej). Jeśli pedal nie jest potrzebny, proces uruchamiania/wyłączania można zrealizować z przycisku na uchwycie spawalniczym. Pedał jest opcjonalny, jego koszt to dodatkowo 400 EUR. Zachęcamy do zapoznania się ze zdjęciami monitora, na których widoczne są wszystkie ustawiane parametry i funkcje. Podajnik Citronix można stosować nie tylko do spawania laserowego, ale również TIG. Wyposażyliśmy go w filtr eliminujący zakłócenia HF. Obsługuje drut o średnicy od 0,8 do 2,4 mm. Aktualnie menu dostępne jest w języku angielskim, niemieckim, węgierskim i serbskim. W naszej ofercie znajdą Państwo wiele urządzeń spawalniczych własnej produkcji, sterowanych cyfrowo: MIG/MAG, MIG Puls Synergic, również do spawania zrobotyzowanego z ekranem dotykowym, TIG AC/DC z ekranem dotykowym, cyfrowe przecinarki plazmowe, elektronikę do sterowania pompą wysokociśnieniową do cięcia wodą, podajnik ścierniwa do cięcia wodą, sterowanie wysokością napięciową THC z ekranem dotykowym... Jesteśmy bardzo aktywni w zakresie innowacji i rozwoju. Zachęcamy do zapoznania się z pozostałymi produktami; jeśli są Państwo producentem i zainteresowani współpracą, oferujemy również sprzedaż know-how.

Stanje: pripravljen za uporabo (rabljen), Servo gnani stroj za navijanje in rezanje navojev, Rabljeni stroj Proizvajalec: Electric Servo Model: M12H Hodpfxexdfauo Af Tjng Dimenzije: Širina: 700 mm Globina: 150 mm Višina: 520 mm Radij: 1100 mm Priložen komplet vpenjalnih glav Tap Torsion GT 12-0316: 3,5 × 2,7 M3 4,5 × 3,4 M4 8 × 6,2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 M12 Torsion u-9

Stanje: novo, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SCV-40-G8-6-KW3, skupna širina: 406 mm, skupna masa: 4.000 kg, krmilna napetost: 400 V, najv. debelina jeklene pločevine: 6 mm, Popolnoma nov stroj, zaradi odpovedanega dela nikoli ni bil zagnan. Motorna odvijalna enota s polnilnim vozičkom. Električni podajalnik (AE400). Pogon (motor) + nadzorni sistem sta od podjetja SIEMENS. Na sprednji strani stroja je nameščen merilni valj, ki z natančnostjo +/- 0,1 mm spremlja ustrezno podajanje. Enota ustreza CE standardom. Masa koluta: 4.000 kg Hnodpfx Afjv Dumbo Tog Širina koluta: 406 mm Zunanji-notranji premer koluta: Ø1400 mm - Ø508 mm Debelina materiala: 0,6 mm - 6 mm Napetost: 400 V - aux 24V

Stanje: rabljeno, TECHNICAL DATA * Spindle speed: 200-20,000 [rpm] * Travel distance: 38 [mm] - Distance table / spindle axis: 89 [mm] - Table size: 182 x 300 [mm] - Machine height: 342 [mm] ACCESSORIES Hnedpfsuhab Hjx Af Tog - Set of collet holders

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, upogibna sila (maks.): 1.000 t, hod: 200 mm, obratovalna hitrost: 50 mm/s, hitrost vzvratne vožnje: 180 mm/s, skupna masa: 8.000 kg, skupna dolžina: 3.915 mm, skupna širina: 1.605 mm, skupna višina: 2.655 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, trajanje garancije: 24 meseci, Kot upogiba (maks.): 90 °, dolžina mize: 3.200 mm, delovna višina: 450 mm, All-električni servo upogibni stroj Nazivna sila (kN): 1000 Hod drsnika (mm): 200 Globina grla (mm): 360 X-osni pomik (mm): 600 R-osni pomik (mm): 200 Z-osni pomik (mm): 2500 🔹 Pametni CNC sistem – SL100-P z naprednimi algoritmi in 12-palčnim zaslonom na dotik za intuitivno upravljanje. Hnodpfx Afsv Hchle Tog 🔹 Visokonatančna konstrukcija – Preračunana s pomočjo metode končnih elementov (FEA), žarjena in enkratno strojno obdelana za dolgoročno stabilnost in natančnost. 🔹 4-osni inteligentni odrivnik materiala (backgauge) – Pogon z AC servomotorji, hitra pozicioniranja z avtomatskim preprečevanjem trkov. 🔹 Sistem za kompenzacijo natančnosti – Nastavljive konveksne letve in fina nastavitev za optimalno natančnost upogibanja. 🔹 Zmogljiv in vzdržljiv pogon – Visokonavorni servomotor, robustni krogelni vijaki in zaščita za dolgo življenjsko dobo. 🔹 Popolnoma zaprto povratno vodenje – Magnetno merjenje Y1/Y2, natančnost pozicioniranja ±5μm. 🔹 Optimiziran električni sistem – Zaprt električni omarica, učinkovito odvajanje toplote in urejena napeljava za zanesljivost in enostavno vzdrževanje. 🔹 Uvožene precizne komponente – Krogelni vijaki in linearna vodila zagotavljajo natančnost brez kompenzacije hoda. 🔹 Visoka natančnost, stabilnost in pametna avtomatizacija – zasnovano za profesionalno upogibanje pločevine!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, globina grla: 400 mm, trajanje garancije: 24 meseci, Model: GB-4016E Presskraft (kN): 400 Biegelänge (mm): 1600 Säulenabstand (mm): 1320 Maximale Öffnungshöhe (mm): 430 Stößelhub (mm): 180 Ausladung (mm): 400 X-Achsen-Hub (mm): 400 X-Achsen-Geschwindigkeit (mm/s): 400 R-Achsen-Hub (mm): 140 R-Achsen-Geschwindigkeit (mm/s): 200 Z-Achsen-Hub (mm): 1040 Z-Achsen-Geschwindigkeit (mm/s): 400 Hnedpfxewzqx Hs Af Tog Maschinenleistung (kW): 17,2 Abmessungen (mm): 2090 × 1265 × 2290 Gewicht (kg): 3500

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A complete can feeding, counting, and closing line including labeling and cartoning is available. 1) Can Feeder IMA Swiftpack UN 800S, year of manufacture: 2007, output: 60 cans/min, formats (diameter/height): 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting Machine Cremer CF 1220, year of manufacture: 2002, counting speed: 1000 products/min, counting heads: 1, channels: 12, formats: capsules (HGK & WGK) and tablets (round & oblong), including one spare cylinder for storage flaps. 3) 2x Rotary Tables Höflinger & Karg S1, table diameter: 1000mm. 4) Cap Closing Machine (Screw Capper) CBV Servo, year of manufacture: 2019, closing speed: 40 closures/min, cap diameter range: 23mm-100mm. 5) Cap Closing Machine (Crimp Capper) Rudolf Deckert AVM 738, year of manufacture: 2003, closing speed: 50 cans/min, can diameters: 45mm/60mm, cap formats (diameter/height): 42.4mm/17.15mm, 50mm/12mm. 6) Can and Bottle Labeler IMA Sensitive 350, year of manufacture: 2009, labeling capacity: 350 units/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot printer Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and Bottle Cartoner Uhlmann C100, year of manufacture: 1988, cartoning speed: 70 cans/min, max. can/bottle diameter and height: 60mm/120mm, carton length range: 30mm-113mm, carton width range: 15mm-85mm, carton height range: 70mm-130mm. The machine was converted in 2017 for cans and bottles and equipped with a Mitsubishi D700-SC control, including GUK Cartonac 91 folding unit, 3x code readers and luminescence control. 8) Coding and Inspection System Wipotec TQS-HC-A for serialization, tamper evident, and weighing, year of manufacture: 2017, inspection speed: 300 products/min, including 2x label dispensers Herma 400, double print head (2 cartridges), camera for print inspection, weighing cell with weigh belt, and hand scanner. 9) Bundler (Tight Bundler) Christ FilmTeq 3030, year of manufacture: 2011, infeed: 50-200 cartons/min, outfeed: 7-50 bundles/min, carton length range: 15mm-400mm, carton width range: 15mm-90mm, carton height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, band height range: 30mm-230mm. Documentation available. An on-site inspection is possible. Hnjdpswa Tixsfx Af Tsg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.910 mm, skupna širina: 900 mm, skupna dolžina: 650 mm, stiskalna sila: 150 t, širina mize: 900 mm, dolžina mize: 650 mm, obratovalna hitrost: 220 mm/s, skupna masa: 6.000 kg, hitrost vzvratne vožnje: 220 mm/s, širina plošče bata: 750 mm, dolžina plošče bata: 500 mm, delovna višina: 950 mm, hod: 400 mm, pritisk: 290 letvica, hitrost stiskanja: 8 mm/s, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, TECHNICAL DATA: Force: 150 t Motor power: 11 kW Cylinder stroke: 400 mm Variable working speed: 8 - 0 mm/sec Approach speed: 220 mm/sec Return speed: 220 mm/sec Working pressure: 290 bar Hnedswkvktspfx Af Tsg Table size: 900 x 650 mm Ram size: 750 x 500 mm Clear height: 650 mm Working height: 950 mm Width: 1,360 mm Depth: 2,135 mm Height: 2,910 mm Weight: 6,000 kg We have developed motorized screw pumps of the CR/SERVO series with low energy consumption and a 60% energy saving. They have been specially designed for high production performance tasks in stamping, drawing and punching. The latest generation CR-SERVO presses have evolved to offer multiple application options, such as the ability to integrate these machines into automated production lines. FRAME: The steel frames of this series are made from an electro-welded structure, manufactured exclusively from S355JR steel. The frames are stabilized until the end of the welding process and then machined to guarantee perfect parallelism and precision. They are designed and calculated with finite element analysis software, ensuring our high standards in precision and quality. The presses feature upper and lower bolster/ram plates made from C45E steel, equipped with T-slots according to DIN 650. The upper plate ensures perfect parallelism through two lateral 50 mm diameter guides with maintenance-free bushings. HYDRAULICS: Single-acting main cylinder with guide sleeve, chrome-plated piston, and maintenance-free wear-resistant guides. For rapid approach and return, two double-acting lateral cylinders are installed, featuring a chrome-plated rod and guide for fast jogging and retraction. REXROTH hydraulic group with servomotor and pre-fill devices, including pre-fill valves for approach and return, as well as a constant flow pump for steady output and speed via the servo motor system, return lock, pressure relief valve, spindle shut-off valve, and air cooling. ELECTRICS: Includes as standard a SIEMENS PLC mod. SIMATRIC S7 1200 and an adjustable 7" panel (MPT-700). Allows programming of power, stroke, and speeds, with a memory capacity for 300 programs. The electrical and hydraulic valves are redundant and automatically controlled. An additional safety block and auto-monitoring devices for the valves and safety system are included. Functionality and safety distances for the light curtains are checked and certified. Operation is carried out via a low-voltage electric foot pedal. To ensure safety, the machine features front electrical safety interlocks (type 4 PLe), two accessible lateral safety guards with safety valve, and internal LED lighting in the work area. Complies with all major safety and health requirements as per the CE standard.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, širina tuljave: 200 mm, največja širina izdelka: 200 mm, skupna masa: 80 kg, trajanje garancije: 12 meseci, delovna širina: 200 mm, višina izdelka (maks.): 3 mm, širina valja: 64 mm, Silicon+ SFS 200 Servo Feed Roll Unit Compatible with all types of presses and primarily used on Bruderer, Schaal, and Mabu machines. Feed length – min. 0.10 mm up to max. 9999.99 mm Feed width – max. 100 mm, 200 mm, or 300 mm depending on the required model. Material thickness – 0.20 – 3.20 mm Feed angle – 180° Press line height – ±50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC touchscreen Brushless servo motor – 0.75 kW, 1.8 kW, or 2.3 kW Feed unit weight approx. 80–150 kg Feed unit dimensions: 780 x 730 x 680 mm – The unit is powered by a brushless direct-drive servo motor, eliminating gear play and wear, with no noise, no lubrication required, and a safe, synchronized roller segment pair. – Rollers can be supplied with PU coating on request for gentle handling of delicate raw material. – Synchronization between the feeder and the stamping press is straightforward via a cam signal from the press’s PLC. – The unit can be programmed for up to 10 groups of feeding steps, saved as recipes. Feed length is steplessly adjustable during operation. EUR 1 certificate for European origin and CE compliance. Hnedpfjvptz Iox Af Teg Specifications are subject to change without prior notice. Upon consultation, we can manufacture feeders tailored to your requirements.

Stanje: novo, Leto izdelave: 2022, 2-barvni tampon tiskalnik s servomotorjem in linearnim mizo Specifikacije: Električna napetost: 230 V / 50 Hz / 10 A Nadzorna napetost: 24 V DC Tlak zraka: 6 barov Hsdpfxen Ry Tko Af Tjng Poraba zraka: 600 Nl/min Teža: 200 kg Možne so rešitve po meri! Oglejte si tudi naše druge oglase.

Stanje: novo, Condition: New Delivery time: Approx. 14-16 weeks from order Country of origin: Turkey Price: €202,100 Leasing rate: €3,869.08 Pressing force: 320 tons Bending length: 6,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 365 mm Distance between frames: 5,100 mm Side frame throat depth: 450 mm Installation height: 630 mm Drive concept: Hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 1,100 mm Table width: 154 mm Oil tank capacity: 160 l Motor power: 2 x 11 kW Length: 7,500 mm Width: 1,910 mm Height: 3,350 mm Weight: 29,000 kg One servo motor and pump per cylinder 4 axes (Y1, Y2, X, and R) CNC control SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with your finger) - User-friendly conversational programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blank - Automatic calculation of bending sequences - Graphic product and tool memory - Correction capability - USB ports and Ethernet connection for import, backup, and program transfer Hnsdpfx Ajwirgnjf Teg - Windows operating system - IGES, STEP, DXF file import supported Servo-driven backgauge with linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKASam laser safety device, mounted on upper beam Sheet support arms on linear guides Equipped according to CE regulations Filled with oil Operator manual in German or English ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise level - High speed PRICE FCA TURKEY Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Leto izdelave: 2020, Stanje: novo, Popolnoma nov originalni (OEM) stroj s 4 servopogoni. Primeren za tiskanje XXL velikosti predmetov (na primer pokrovi motorjev, tudi ukrivljeni izdelki). Letnik 2020 0 delovnih ur Z garancijo Električna napetost: 400V / 10A Prosimo, oglejte si tudi naše ostale oglase. Hnodpfxjn Ry T So Af Tog

Stanje: novo, Condition: New Delivery time: approx. 14–16 weeks from order Country of origin: Turkey Price: €187,100 Leasing rate: €3,536.19 Pressing force: 400 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3400 mm Throat depth: 410 mm Installation height: 630 mm Drive system: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Motor power: 2 x 11 kW Length: 5750 mm Width: 2110 mm Height: 3450 mm Weight: 27,780 kg A separate servomotor and pump per cylinder 4 axes (Y1, Y2, X, and R) CNC control SKY 22 - Full HD graphic display 21.5" with 2D and 3D visualization of the programmed part - Intuitive touchscreen operation (simple contour drawing by finger) - User-friendly dialog-based programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphical product and tool storage - Correction function - USB ports and Ethernet interface for import, backup, and program export - Operating system Windows - Import support for IGES, STEP, DXF files Backgauge driven by servomotor on linear guides and recirculating ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-way die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on the upper beam Sheet support arms on linear guides Equipment in accordance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics only operate during upper beam movement - Low energy consumption - Low noise emissions - High speed Price FCA Turkey Hnodewir A Ajpfx Af Tog Options: CNC controller Delem DA-66 S CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Fanuc A06B-0116-B804 AC servo motor. Model: Bis 1/6000 Tip: A06B-0116-B804 Hitrost: 6000 obr/min Frekvenca: 400 Hz Izhodna moč: 0,5 kW 1,8 A Hnjdpfx Afotvz Evj Tjg Vhod motorja: 172 V, 8 polov, 3 faze Teža: 1,9 kg V dobrem delovnem stanju. Oglejte si tudi naše ostale oglase.

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €144,300 Leasing rate: €2,727.27 Press force: 320 t Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 2,600 mm Throat depth: 410 mm (side frame) Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Hjdpfjwiqphsx Af Tsng Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2 x 11 kW Length: 4,300 mm Width: 1,820 mm Height: 3,330 mm Weight: 16,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22: - Full HD graphic display 21.5” with 2D and 3D visualization of programmed part - Intuitive touchscreen operation (easy drawing of bending contour with finger) - Operator-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bend sequence calculation - Graphical product and tool storage - Correction function - USB ports and Ethernet connection for import, backup, and program transfer - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning system Top tool 1010/A/75°, segmented and gooseneck 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKASam laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE standards Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise emission - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-release clamping levers for the upper tool

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €98,300 Leasing rate: €1,857.87 Pressing force: 135 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2600 mm Side frame depth: 410 mm Installation height: 530 mm Drive concept: Hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 200 mm/s Backgauge X-axis travel: 650 mm Backgauge X-axis speed: 500 mm/s Backgauge R-axis travel: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2x4 kW Length: 4200 mm Width: 1680 mm Height: 2750 mm Weight: 9500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphical display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touchscreen operation (simple drawing of bending contours by finger) - Operator-friendly dialogue programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending sequence - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphical product and tool memory - Correction capability - USB ports and Ethernet connection for import, backup, and program outsourcing - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V=16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Hnedpfx Aowirr Rof Tjg Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise generation - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with possibility to import 3D files Quick-clamping levers for top tool

Stanje: novo, Condition: New Delivery time: approx. 4-6 months from order Country of origin: Turkey Price: €292,300 Press force: 600 tons Bending length: 6,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 5,100 mm Throat depth (side frame): 510 mm Installation height: 700 mm Drive concept: hydraulic Rapid traverse Y-axis: 80 mm/s Working speed Y-axis: 6.5 mm/s Return speed Y-axis: 80 mm/s Backgauge travel X-axis: 750 mm Oil tank: 280 l Motor power: 2 x 11 kW Length: 7,600 mm Width: 2,650 mm Height: 3,950 mm Weight: 52,500 kg EACH CYLINDER EQUIPPED WITH ITS OWN SERVOMOTOR AND PUMP 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (simply draw the bending contour with your finger) - User-friendly dialog-based programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the flat length for sheet blanking - Automatic bending sequence calculation - Graphical product and tool storage - Correction function - USB ports and Ethernet connection for import, backup, and program outsourcing - Operating system: Windows - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-way die block 60x60 2009 (V=16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms on linear guides Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulic system runs only during upper beam movement - Low energy consumption - Low noise emission - High speed PRICE FCA TURKEY Hsdpewiqmasfx Af Teng Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with option to import 3D files

Stanje: novo, Condition: New Delivery time: approx. 4-6 months from order Country of origin: Turkey Price: €231,900 Press force: 400 t Bending length: 6050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 5100 mm Throat depth at side frame: 510 mm Installation height: 630 mm Drive concept: Hydraulic Rapid traverse Y-axis: 150 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 150 mm/s Backgauge travel X-axis: 750 mm Oil tank: 160 l Motor power: 2x11 kW Length: 7500 mm Width: 2110 mm Height: 3810 mm Weight: 34,600 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour with your finger) - User-friendly programming in dialog mode, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic unfolded length calculation for sheet cutting - Automatic bending sequence calculation - Graphical product and tool memory - Correction capability - USB ports and Ethernet connection for import, backup, and program outsourcing - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V=16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipped according to CE regulations Oil fill Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emission Hodpfxswir Avs Af Tong - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Leto izdelave: 2025, Condition: new Year of manufacture: 2025 Stock number: 080085 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €110,867 Leasing rate: €1,886.22 Hjdpfx Afewirtbs Tsng In stock: 1 unit Special price: €99,800 Pressing force: 175 tons Bending length: 3050 mm Axes: Y1 / Y2 / X / R / Z1 and Z2 Stroke: 265 mm Distance between uprights: 2600 mm Throat depth (side frame): 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 200 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2 x 4 kW Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: 10,900 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 6 Axes (Y1, Y2, X, R, Z1, and Z2) CNC control: DELEM DA-66 S – 2D graphic touchscreen programming mode – 3D machine visualization, simulation and production – 24" high-resolution color TFT display – Delem Modusys compatibility (scalability and adaptability of modules) – USB, peripheral interfaces – Customized application support within the multitasking control environment – Sensor bending & correction interface – Offline software Profile-S2D Servomotor-driven backgauge on linear guides and ball screws Backgauge finger blocks on dual linear guides CNC-controlled crowning Upper tool 1010/A/75°, split and gooseneck-design 4V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on the upper beam Sheet support arms on linear guides Equipped according to CE regulations Oil filling included Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: – The hydraulics run only during upper beam movement – Low energy consumption – Low noise emission – High speed OPTIONS (LEAD TIME WITH THESE OPTIONS APPROX. 16 WEEKS): CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Further options such as pneumatic or hydraulic tool clamping available on request.

Stanje: novo, Condition: new Delivery date: October 2025, interim sale/availability Country of origin: Turkey Hnsdpfx Asw Dvkgsf Tjg Price: €70,700 Leasing rate: €1,336.23 Pressing force: 100 t Stroke: 600 mm Table: 900 x 500 mm Installation height: 800 mm Throat depth: 400 mm Rapid traverse speed: 220 mm/s Working speed: 1 - 20 mm/s Return speed: 250 mm/s Motor: 14.65 kW Length: 1,900 mm Width: 1,700 mm Height: 4,400 mm Weight: 6,000 kg Working pressure: 30 - 239 bar Welded monoblock frame Cylinder hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rexroth Hydraulic overload valve Cooler Electrical components by Siemens 8 additional digital inputs and outputs 10-inch touchscreen Siemens S7-1200 PLC Stroke, pressure, speed, and dwell time adjustable via PLC Remote maintenance access Light curtain Safety guards Safety PLC from Siemens or Sick Two-hand control panel Reset and emergency stop buttons Equipment in accordance with CE directives