Pawert Spm nakup rabljenega (189)

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 80 t, širina mize: 660 mm, dolžina mize: 860 mm, prebijalna sila: 80 t, prebojna odprtina v mizi: 180 mm, nastavitev hoda: 110 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guideways • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standard compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set manufactured to requested specifications Lrsdpfx Ajvtx H Rehujn • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Tons Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed distance: 420 mm Distance between uprights: 400 mm Ram adjustment: 85 mm Approximate width: 1400 mm Approximate depth: 1735 mm Approximate height: 2220 mm Front anchorage size: 670 mm Side anchorage size: 1040 mm Bolster hole diameter: Ø190 mm Bolster dimensions: 540×740 mm Die fixing hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Should you require changes to technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, širina mize: 720 mm, dolžina mize: 1.000 mm, prebojna odprtina v mizi: 220 mm, nastavitev hidravličnega cilindra: 120 mm, nastavitev hoda: 125 mm, Oprema: varnostna svetlobna zapora, PLACE OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE FROM STOCK GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Vibration stress relief will be applied to the frame and welded components - Table parallelism and squareness tolerance conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slideways - Ram with cushion cylinder - Ram, connecting rod, and clutch fork made of steel casting, GS52 - High-strength monoblock crankshaft – 4140 - Bronze bushings inside the connecting rod (Zr14) - Rear flywheel - Spare bolster plate included - Hydraulic overload protection - Motorized bed-to-ram adjustment - Automatic central lubrication - Pneumatic pedal with latch and dual-hand control with timer - Electrical cycle counter Lredpfx Ajvyrywehusn - PLC application and touchscreen - DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE application – OPTIONAL - Finger protection light curtains – SICK, LEUZE - Safety PLC (Controls complete electrical system, valves, dual-hand and pedal) – PILZ - Dual coil safety valve – GPA, TOPAIR - Panel and position-locked limit switches - Safety wedge - Protective covers in accordance with CE requirements TYPE: D-TYPE MONOBLOCK FRAME Capacity: 150 Ton Bed-to-Ram Distance: 500 mm Distance Between Housings: 1080 mm Ram Adjustment: 120 mm Approx. Press Width: 1400 mm Approx. Press Depth: 1900 mm Approx. Press Height: 3000 mm Table Bore Diameter: 220 mm Table Size: 720 x 1000 mm Die Clamping Slot Diameter: 55 mm Ram Size: 450 x 800 mm Bed Height from Floor: 900 mm Stroke Adjustment: 10 – 125 mm Strokes Per Minute: 50 spm Motor Power: 15 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 12,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 80 t, širina mize: 600 mm, dolžina mize: 800 mm, višina mize: 850 mm, prebojna odprtina v mizi: 190 mm, nastavitev hidravličnega cilindra: 85 mm, nastavitev hoda: 100 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration will be applied to the frame and welded parts - Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Ram, connecting rod, and ram nose made of GS52 cast steel - High-strength one-piece crankshaft – 4140 - Connecting rod bushings made of bronze (Zr14) - Rear-mounted flywheel - Equipped with spare bolster table - Hydraulic safety device - Motorized ram height adjustment - Automatic central lubrication - Pneumatic pedal with safety latch and double-handed operation with timer - Electric counter Ledpevxhb Ujfx Ahuern - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE conformity - OPTIONAL - Beam type safety light curtains – SICK, LEUZE - Safety PLC (controls entire electrical system, valve, double-hand and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and panel - Safety block - Protective guards compliant with CE directive TYPE D-TYPE MONOBLOCK FRAME Capacity 80 Tons Table-to-Ram Distance 400 mm Distance Between Side Frames 880 mm Ram Adjustment 85 mm Approx. Press Width 1150 mm Approx. Press Depth 1500 mm Approx. Press Height 2500 mm Table Hole Diameter 190 mm Table Size 600 x 800 mm Die Mounting Hole Diameter 40 mm Ram Size 245 x 410 mm Floor-to-Table Height 850 mm Stroke Adjustment 10–100 mm Strokes per Minute 50 spm Motor Power 7.5 kW Motor Speed 1450 rpm Approx. Weight 6,500 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 200 mm, širina mize: 1.000 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, thanks to their rigid frame construction. The CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed with a focus on stable operation for high-volume production, die protection, and operator safety. With a monoblock frame, 8-point guided slide system, hydraulic overload protector, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages Stable operation with a large 1000×2000 mm table for big dies Die/equipment protection with hydraulic overload protection Controlled and user-friendly operation via PLC + touchscreen interface High operator safety with photoelectric light curtain (LEUZE) Quick die changes with 99 die memory slots Lodpfxjx N Ruqj Ahuern Application Areas Punching/cutting/forming applications requiring large tables Mass production with automatic feeding lines Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch–brake • Additional T-slotted sub-plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterweight piston on slide • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse movement • Overload hydraulic protection • Motorized slide adjustment mechanism • Photoelectric safety curtain • Enclosed lubrication gear unit • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of table • Custom die options ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm SPM (strokes per minute): 25–45 Max. closed die height: 600 mm Min. closed die height: 480 mm Side window dimensions: 600×600 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric shafts (cranks): 2 Safety fuse: Hydraulic Internal panel switchgear: Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operating system: 4-position Die memory: 99 slots Mounting style: Floor standing Frame type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.100 mm, prebijalna sila: 200 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 60 mm, nastavitev hoda: 180 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready use with PLC control and dual hand/foot controls Applications Ledpfx Ahjvtyx Iouorn - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-surface slide guides • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Central, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-solenoid safety valve • Manually adjustable stroke • Light curtain hand–finger safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor movement • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Decoiler, feeder, and straightener • One set of tooling/custom die as requested • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Bed–ram distance: 500 mm Slide–bed distance: 600 mm Distance between uprights: 510 mm Ram adjustment (shut height): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchor distance: 920 mm Side anchor distance: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping slot diameter: Ø60 mm Ram size: 620×350 mm Floor to bed height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: If you require any changes to the technical specifications, please let us know. ✅ MANUFACTURING / SUPPLY NOTE: This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), stiskalna sila: 250 t, hod: 160 mm, širina mize: 700 mm, dolžina mize: 1.100 mm, globina grla: 350 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, The eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure make it a reliable performer suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control and dual-hand/foot operation Applications - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES - Steel construction body - Four-sided guided slide - Nodular cast iron connecting rod and gear housings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully-automatic grease lubrication - Pneumatic clutch and brake combination - Compliance with CE safety directives - Double-coil safety valve - Manually adjustable stroke - Finger-hand protection safety system with light curtain - PLC control system - Dual-hand/foot control system - Mechanical safety system - Emergency reverse motor operation - Complies with occupational health and safety regulations - Conforms to CE standards ✅ OPTIONAL FEATURES - Vibration isolation mounts - Touch LCD screen (standard for 150–300 ton models) - Hydraulic safety system (standard for 200–300 ton models) - Spare bolster plate - Coil feeder, straightener, and uncoiler - One set of dies according to requested specifications - Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (250 TON) - Capacity: 250 tons - Throat depth: 350 mm - Table–ram distance: 520 mm - Slide–table distance: 630 mm - Distance between side frames: 520 mm - Ram adjustment (regulation): 150 mm Lrjdpex N Nfbofx Ahuon - Approx. press width: 2000 mm - Approx. press depth: 2500 mm - Approx. press height: 3100 mm - Front anchoring dimension: 930 mm - Side anchoring dimension: 1430 mm - Table hole diameter: Ø250 mm - Table size: 700×1100 mm - Die clamping slot diameter: Ø60 mm - Ram size: 670×380 mm - Table height from floor: 810 mm - Stroke adjustment: 20–160 mm - Strokes per minute: 40 spm - Motor power: 22 + 2.2 kW - Motor speed: 1450 rpm - Approximate weight: 12,000 kg Note: Please inform us if you require modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), stiskalna sila: 300 t, hod: 200 mm, širina mize: 700 mm, dolžina mize: 1.200 mm, globina grla: 370 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Eccentric presses are mechanical press types operated by an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Ready-to-use with PLC control and dual-hand/foot pedal operation Areas of Application - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-way guide slide • Spheroidal cast connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Designed according to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual-hand/foot pedal operation system • Mechanical safety system • Emergency motor reverse feature • Complies with occupational safety regulations • CE compliance ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch-screen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die according to requirements • 8-way slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Lrsdpfx Aox N Nfhohusn Throat depth: 370 mm Bed–ram distance: 530 mm Ram–table distance: 650 mm Distance between side frames: 470 mm Ram adjustment (shut height adj.): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchor dimension: 940 mm Side anchor dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamping slot diameter: Ø60 mm Ram size: 780×400 mm Floor-to-table height: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 4 kW (5,44 KM), stiskalna sila: 40 t, širina mize: 440 mm, dolžina mize: 700 mm, prebijalna sila: 40 t, prebojna odprtina v mizi: 140 mm, vrtina cilindra: 35 mm, nastavitev hoda: 80 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press used in cold forming operations such as punching, cutting, and forming with dies. It operates by transmitting force through an eccentric mechanism. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance thanks to centralized automatic lubrication - Production-ready use with PLC control + dual hand/foot control Areas of application: - Cold cutting and punching operations - Cold notching applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-point guided ram • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant Lsdpfjvtx Axjx Ahujrn • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • Compliant with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as specified • Eight-point guided ram ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between side frames: 330 mm Ram adjustment (setting): 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage dimension: 575 mm Side anchorage dimension: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die holder slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10–70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: For any requests to modify the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 130 t, širina mize: 750 mm, dolžina mize: 1.000 mm, prebijalna sila: 130 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 55 mm, nastavitev hoda: 140 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for series production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance due to centralized automatic lubrication • Production-ready use with PLC control + dual hand/foot control Application Areas • Cold cutting and punching operations • Cold breaking applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel frame body • Four-face guided slideways • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection safety system with light curtain Lodpfjvtyvgsx Ahusrn • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliance with occupational safety regulations • CE standard conformity ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of dies manufactured to customer requirements • Eight-way slide guiding ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 tons Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Distance between uprights: 450 mm Ram adjustment (regulation): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring size: 790 mm Side anchoring size: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 3.100 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, frekvenca hodov (min.): 13 obr/min, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, Standard Features • ELGO P40T Touch NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract function • Backgauge lifting function for parts longer than 1,000 mm • Adjustable cutting length from the control panel to increase the number of cuts in short sheet cutting • Ball transfer sheet support table • Upper blade with 2 cutting edges / Lower blade with 4 cutting edges • Special pivot system reducing maintenance requirements • 1,000 mm front support arms, with ruler, T-slots and stoppers • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control arm and safety enclosures • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front delivery (Type 2) • Adjustable angle square 0-180º • Front support arms at required lengths • Special throat depth 500 mm • Full-length openable front finger guard • Front finger safety light curtain • Special blade • Laser cutting line • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front sheet support arms • Rear light barrier complying with CE standards • Light type safety guard TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 10 mm Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Ljdex Npddjpfx Ahuern Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 7 / 13 spm Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 Tons

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 160 t, širina mize: 920 mm, dolžina mize: 660 mm, globina grla: 320 mm, prebijalna sila: 160 t, vrtina cilindra: 55 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Areas of Application - Cold punching and cutting operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-point slide guiding • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain finger-hand safety system • PLC control system • Dual hand/foot pedal operation system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Complies with CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster table • Decoiler, feeder, and straightener • One set of dies per requested specifications • 8-point slide guiding ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table-ram distance: 500 mm Slide-table clearance: 540 mm Distance between side frames: 500 mm Ram adjustment: 120 mm Approx. press width: 1,600 mm Approx. press depth: 2,280 mm Approx. press height: 2,750 mm Front anchor dimension: 840 mm Side anchor dimension: 1,300 mm Table hole diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1,450 rpm Lredpfx Ahevtywdsusn Approx. weight: 7,100 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 125 t, širina mize: 700 mm, dolžina mize: 900 mm, prebojna odprtina v mizi: 210 mm, nastavitev hidravličnega cilindra: 100 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES o Steel construction frame, o Stress relief with vibration will be applied to the frame and welded components. o Parallelism and perpendicularity tolerance between tables in compliance with ISO and DIN standards o Pneumatic clutch and brake combination – OMPI-Italy o Slide supported by 8 guides o Slide equipped with cushion cylinder o Components such as slide, connection rod, and ram nose of cast steel, GS52 o High-strength solid crankshaft – 4140 o Bronze bushing in connection rod (Zr14) o Rear flywheel placement o Spare table set o Hydraulic overload protection o Motorized adjustment of bed-slide o Automatic central lubrication o Pneumatic pedal with latch and double hand control with timer o Electronic counter o PLC control system with touchscreen - DELTA o Electrical switchgear by SIEMENS-SCHNEIDER o CE conformity - OPTIONAL o Finger safety light barriers - SICK, LEUZE o Safety PLC (controls all electric system, valves, double-hand, and pedal) - PILZ o Dual-coil safety valve – GPA, TOPAIR o Locked position switch and control panel o Safety block o Protective guards in accordance with CE regulations. TYPE: D-TYPE MONOBLOCK FRAME Capacity: 125 Ton Distance Bed to Slide: 500 mm Distance Between Uprights: 1000 mm Slide Adjustment: 100 mm Approx. Press Width: 1250 mm Ledpfx Ahovxhqveuern Approx. Press Depth: 1750 mm Approx. Press Height: 2850 mm Bed Bore Diameter: 210 mm Bed Size: 700 / 900 mm Die Holding Bore Diameter: 55 mm Slide Size: 340 / 550 mm Table Height from Floor: 850 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Approx. Weight: 8,500 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 900 mm, dolžina mize: 1.200 mm, prebojna odprtina v mizi: 260 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 200 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of the frame and welded parts by vibration - Table parallelism and squareness tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Parts such as ram, connecting rod, and slide block made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 Lrodpfxevyr Eas Ahuon - Bronze bushing in connecting rod (Zr14) - Rear-mounted flywheel - With spare bolster table - Fitted with hydraulic safety devices - Motorized die height adjustment - Automatic central lubrication system - Pneumatic pedal with latch and dual-hand control with timer - With electronic counter - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE certification - OPTIONAL - Light curtain finger protection barriers – SICK, LEUZE - Safety PLC (monitors all electrical system, valves, dual-hand and pedal controls) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective safety guards per CE norms to be included TYPE: D TYPE MONOBLOCK FRAME Capacity: 300 Tons Shut Height (Table to Ram): 530 mm Distance Between Uprights: 1280 mm Ram Adjustment: 150 mm Approx. Press Width: 1700 mm Approx. Press Depth: 2200 mm Approx. Press Height: 3500 mm Table Hole Diameter: 260 mm Table Size: 900 x 1200 mm Die Clamping Slot Diameter: 60 mm Ram Size: 470 x 900 mm Table Height from Floor: 1000 mm Stroke Adjustment: 20–200 mm Strokes per Minute: 38 spm Motor Power: 30 + 2.2 kW Motor Speed: 1450 RPM Approximate Weight: 18,000 kg

Stanje: novo, Leto izdelave: 2025, moč: 7,5 kW (10,20 KM), stiskalna sila: 100 t, širina mize: 670 mm, dolžina mize: 950 mm, prebijalna sila: 100 t, prebojna odprtina v mizi: 180 mm, vrtina cilindra: 45 mm, nastavitev hoda: 120 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Presses are mechanical press machines that operate with force generated via an eccentric mechanism, designed for cold forming operations such as punching, cutting, and shaping with dies. Thanks to their high production speed and repeatability, they are efficient and reliable solutions for mass production lines. CRONOSSTECH C-Type Eccentric Press 100 Ton is designed for stable performance in cold forming applications. Featuring a rigid steel frame construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers dependable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance need with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slideway guides • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts from 4140 tempered steel • Central full automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor movement • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster • Decoiler, feeder, and straightener • One set of dies according to customer specs • 8-sided slideway guides ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between uprights: 420 mm Ram adjustment (shut height): 85 mm Approx. machine width: 1400 mm Lrsdpfovtx Inox Ahujn Approx. machine depth: 1900 mm Approx. machine height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Stroke per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2026, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: mehanski, delovna širina: 3.060 mm, kot rezanja (min.): 1,3 °, frekvenca hodov (min.): 41 obr/min, najv. debelina pločevine: 4 mm, najv. debelina jeklene pločevine: 4 mm, nastavitev zadnjega prislona: poganjan z motorjem, zadnji prislon: 750 mm, moč: 7,5 kW (10,20 KM), trajanje garancije: 12 meseci, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, zaščita prstov, Standard Features ELGO P40T CNC control unit Strong, welded and monoblock frame structure providing maximum cutting precision Lsdpfxjyg Ic Es Ahujrn NC-controlled, motorised 750 mm backgauge system Upper blade with 2 cutting edges, lower blade with 4 cutting edges, manufactured from high-alloy steel Mechanical hold-down system preventing sheet slippage during cutting Easily adjustable blade gap adjustment mechanism Front table with ball inserts Front support arms with metric ruler Cutting line illumination system Finger guard system Foot pedal Rear protective guards Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sliding system enabling easy handling and sliding of the sheet towards the rear System for dropping the cut piece to the front Adjustable front square gauge (0–180°) Front support arms of desired length Manual 750 mm backgauge, handwheel adjustable from the front Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3060 mm Cutting Angle: 1.3° Cutting Speed: 41 spm Table Depth (C): 800 mm Machine Dimensions (L × W × H): 3600 × 2250 × 1400 mm Motor Power: 7.5 kW Weight: 4000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, širina mize: 700 mm, dolžina mize: 880 mm, višina mize: 850 mm, prebojna odprtina v mizi: 200 mm, nastavitev hidravličnega cilindra: 85 mm, nastavitev hoda: 110 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame, - Stress relief of the frame and welded components via vibration treatment. - Table parallelism and squareness tolerance in accordance with ISO and DIN standards. - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided by 8-point gibs - Slide equipped with cushion cylinder - Components such as slide, connecting rod, and ram head made of GS52 steel casting - High-strength monoblock crankshaft – 4140 - Bronze bushings for connecting rod (Zr14) - Rear-mounted flywheel - Equipped with spare bolster plate - Hydraulic overload protection - Motorized adjustable table-slide - Automatic central lubrication system - Pneumatic pedal with latch and double hand control with timer - Electric counter - PLC application and touchscreen – DELTA - Electrical components: SIEMENS-SCHNEIDER - CE compliance – OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls all electrical system, valves, double hand control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety wedge - Protective guards in compliance with CE regulations MODEL: D-TYPE MONOBLOCK FRAME Capacity: 100 Tons Distance Between Table and Slide: 450 mm Gap Between Side Frames: 960 mm Slide Adjustment: 85 mm Approx. Press Width: 1230 mm Approx. Press Depth: 1650 mm Lrjdpfx Ahsvxhprousn Approx. Press Height: 2500 mm Bolster Plate Hole Diameter: 200 mm Bolster Plate Size: 700 x 880 mm Die Clamping Slot Diameter: 50 mm Slide Size: 245 x 410 mm Height from Floor to Table: 850 mm Stroke Adjustment: 10 – 110 mm Strokes Per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 rpm Approximate Weight: 7,500 kg

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 60 t, širina mize: 590 mm, dolžina mize: 800 mm, prebijalna sila: 60 t, prebojna odprtina v mizi: 140 mm, vrtina cilindra: 40 mm, nastavitev hoda: 100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming with dies. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for serial production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual hand/foot pedal control Application Areas: - Cold cutting and punching operations - Cold forging applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal cast iron connecting rods and gear housings • Crankshaft and transmission shafts from 4140 tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double-coil safety valve • Manual adjustable stroke • Finger–hand protection with light curtain safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • Custom-designed die set • Eight-slide guide ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Table–ram distance: 360 mm Ram–table distance: 395 mm Distance between walls: 380 mm Ram adjustment (stroke): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchorage: 630 mm Side anchorage: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Lredpfx Asvtx D Njhuon Die clamping slot diameter: Ø40 mm Ram size: 340×220 mm Floor to table height: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 SPM Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please notify us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.070 mm, prebojna odprtina v mizi: 240 mm, nastavitev hidravličnega cilindra: 130 mm, nastavitev hoda: 160 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES • Steel construction frame • Stress relief by vibration for body and welded parts • Parallelism and perpendicularity tolerance between tables according to ISO and DIN standards • Pneumatic clutch and brake combination – OMPI-Italy • Ram mounted on 8 sliding guides Lrsdpfx Ajvyr Diohujn • Ram with cushioning cylinder • Ram, connecting rod, and ram nose made from cast steel GS52 • High strength one-piece crankshaft – 4140 • Bronz bushing inside the connecting rod (Zr14) • Rear flywheel configuration • Spare bolster • Hydraulic overload protection • Motorized die height (ram) adjustment • Automatic central lubrication system • Pneumatic pedal with latch and dual-hand control with timer • Electrical counter • PLC control and touch screen – DELTA • Electrical switchgears by SIEMENS-SCHNEIDER • CE application – OPTIONAL • Finger safety light curtains – SICK, LEUZE • Safety PLC (controls all electrical system, valves, dual-hand, and foot pedal) – PILZ • Dual-coil safety valve – GPA , TOPAIR • Locked position switch and control panel • Safety block • Protective guards within CE requirements TYPE: D-TYPE MONOBLOC FRAME Capacity: 200 Tons Distance Table to Ram: 500 mm Distance Between Uprights: 1150 mm Ram Adjustment: 130 mm Approx. Press Width: 1500 mm Approx. Press Depth: 2000 mm Approx. Press Height: 3200 mm Bolster Hole Diameter: 240 mm Bolster Size: 800 x 1070 mm Die Clamping Slot Diameter: 60 mm Ram Size: 450 x 800 mm Table Height from Floor: 950 mm Stroke Adjustment: 20 / 160 mm Strokes Per Minute: 40 SPM Motor Power: 18.5 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 14,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, širina mize: 850 mm, dolžina mize: 1.150 mm, prebojna odprtina v mizi: 240 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 160 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS Lrodpfx Ahevyr D Asujn GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration for frame and welded parts - Parallelism and perpendicularity tolerance between tables complies with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram guided on 8 slides - Ram cushioning cylinder - Parts such as ram, connecting rod, and slide are steel cast, GS52 - High strength one-piece crankshaft – 4140 - Connecting rod inner bronze (Zr14) - Rear flywheel - Spare bolster plate included - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication - Pneumatic foot pedal with latch and time-controlled dual-hand operation - Electronic counter - PLC application and touchscreen – DELTA - Electrical switchgear components SIEMENS-SCHNEIDER - CE conformity – OPTIONAL - Finger guard light barriers – SICK, LEUZE - Safety PLC (monitors complete electrical system, valve, dual-hand, and pedal) – PILZ - Double coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective guards in compliance with CE standards TYPE D-TYPE MONOBLOCK FRAME Capacity 250 Ton Table-to-Ram Distance 520 mm Clearance Between Side Frames 1230 mm Ram Adjustment 150 mm Approx. Press Width 1600 mm Approx. Press Depth 2100 mm Approx. Press Height 3400 mm Table Bore Diameter 240 mm Table Dimensions 850 x 1150 mm Die Clamp Slot Diameter 60 mm Ram Dimensions 470 x 900 mm Floor-to-Table Height 950 mm Stroke Adjustment 20–160 mm Strokes per Minute 40 SPM Motor Power 22 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 16,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 200 mm, širina mize: 900 mm, dolžina mize: 1.800 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses deliver high stability and process security thanks to their rigid frame structures, especially in applications involving large tables and heavy dies. The CRONOSSTECH H-Type Eccentric Press 150 Ton is engineered for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it offers reliable performance under continuous operation conditions. Key Advantages - Stable operation for large dies with wide table dimensions - Die/equipment protection with hydraulic overload safety device - Precise slide guidance with 8-point guide and counterbalance piston - Controlled and user-friendly operation via PLC & touchscreen panel - Enhanced operator safety with light curtain protection system Application Areas - Punching/cutting/forming applications requiring a large bolster - Mass production lines with automatic feeding systems - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted extra bolster plate • 8-point guided slide • Adjustable stroke with single connecting rod Lrjdpfxex N Ru Ds Ahuon • Slide with counterbalance piston • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload safety system • Motorized slide adjustment mechanism • Light curtain safety system • Enclosed gear system in oil sump • Dual-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of bolster • Custom die configuration on request ✅ TECHNICAL SPECIFICATIONS (H TYPE – 150 TON) Capacity: 150 Ton Lower bolster usable area: 900×1800 mm Upper bolster usable area: 900×1800 mm Fixed stroke length: 200 mm Nominal material thickness: 7 mm SPM: 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of crankshafts: 2 Safety device: Hydraulic Control panel components: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operating positions: 4 Die memory: 99 sets Mounting: Floor standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approx. machine dimensions (L×W×H): 4500×3000×2000 mm Approx. weight: 20 Ton Note: Please contact us for any changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: dober (rabljeno), stiskalna sila: 80 t, globina grla: 400 mm, nastavitev hidravličnega cilindra: 80 mm, Pressing force: 80 tons Table size: 750 x 550 mm Ram adjustment: 80 mm Stroke length: 8 - 112 mm Strokes per minute: 78 spm Throat depth: 400 mm Equipped with: Ledpfxsugtkxs Ahuern - Air clutch - Safety guard Country of origin: Germany Machine dimensions (LxWxH): 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg

Stanje: rabljeno, Single-column eccentric press EBU Type 75 SKU Machine No. P 4598462 Year of manufacture: 1962 Pressing force: 75 tons Throat depth: 300 mm Table size: 800 x 620 mm Scrap chute: 325 x 225 mm Ram area: 470 x 180 mm Clamping shank bore: Ø 40 mm Table height above floor: 845 mm Stroke adjustment: 16 - 140 mm Ram adjustment: 80 mm Max. installation height: approx. 420 mm Strokes per minute: 60 & 105 spm Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with rupture disc in the ram - Tool monitoring system UNIDOR, type APS MINI - Mechanically driven gripper feed with strip straightener OSTERKAMP, type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds via 2-step V-belt transmission on the gear train - Two-hand operation - Simple swing-away work area guard - Table height adjustment at lowest position = leadscrew adjustment 50 mm below floor level - Switch cabinet and operator panel for tool monitoring included and placed beside machine Ljdpfxedzqlts Ahuern - Automatic central lubrication - 4 machine feet Space requirement (L x W x H): 2600 x 2300 x 2450 mm Weight: approx. 5.5 tons Good condition

Stanje: rabljeno, Single-Column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very little used eccentric punch press in original condition Machine no. 5250686 Year of manufacture: 1986 As new condition Pressing force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Drop-through hole in table: 300 x 200 mm Table surface, intermediate plate: 740 x 560 mm Drop-through hole in intermediate plate: Ø 103 mm Ljdpfx Ahji A A Tbouern Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height max.: 275 mm (with intermediate plate) Installation height max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 spm Motor power: 3 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic control - Spring-loaded single-disc brake operated by cam disk - Stroke release via pneumatic foot switch - Overload protection with shear plate in ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system BEKA Lubrication Technology - Operating manual and pneumatic diagram available Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons Very good condition, as new

Stanje: rabljeno, Single-column eccentric press PELS - RICHTER Type PEKR 125 Machine No. 20684 Year: 1967 Press force: 125 tons Ljdefim Thepfx Ahuern Throat depth: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height with max. stroke at top: max. 450 mm Clamping shank bore: Ø 50 mm Strokes per minute: 60 spm Table height above floor: 900 mm Motor power: 7.5 kW Electrical connection: 380 Volt, 50 Hz - Overload protection by fracture plate in ram - Pneumatic clutch-brake combination DESCH - Ram counterbalance cylinder - Manual ram adjustment - Two-hand operation - Cam controller - Central lubrication system Vögele - Stroke counter Required space L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Stanje: rabljeno, Leto izdelave: 1980, Pressing force 25 t Stroke rate 1,500 spm Lodpfx Aevu E Iqshujrn Total power requirement 20 kW O F F E R We are pleased to offer you, subject to prior sale and error, the following from stock: BRUDERER High-Speed Automatic Punching Press with Mass Counterbalance Model: BSTA 25 Year: 1980 _____ Nominal press force: 25 t Stroke rate min. – max.: 100 – 800 / 950 / 1075 / 1240 / 1350 / 1500 spm Adjustable stroke lengths: 13 / 16 / 19 / 25 / 32 / 38 mm Ram adjustment: 51 mm Table size: 530 x 530 mm Ram face (upper): approx. 360 x 430 mm Die height: 230 - 281 mm Front opening for tool change: approx. 540 mm Adjustable strip entry height: 80 – 150 mm Max. strip width / left side opening: 202 / 203 mm Main drive approx.: 18 kW Total connected load approx.: 20 kW - 380 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • BRUDERER system for complete mass counterbalancing by means of a transverse eccentric shaft and adjustable lever system • BRUDERER strip feed unit, left-side mounted, type BBV 202/120, adjustable stroke, height-adjustable • Horizontal decoiler, tension-controlled • Continuous stroke and single stroke selectable, inching operation, parts counter, air blow-off device • Separate floor-standing control cabinet and electrical cabinet, vibration dampers • Large, sophisticated sound enclosure (disassembled) Condition: Very good! Previously used for precision electronics connectors, regularly serviced by BRUDERER! A video of the machine will be available shortly—please click here soon: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice We look forward to your order. Further mechanical and hydraulic presses and other machine tools in stock – please check our current inventory on our website: geiger-