Pas Filter Tiska nakup rabljenega (26.469)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Sartorius SM 330019Z okrogla filtrirna posoda, max 10 bar. - Največji tlak: 10 bar - Najvišja temperatura: 140 °C - Prostornina: 0,6 Ijdst D Rg Hjpfx Af Toht V dobrem delovnem stanju. Oglejte si tudi naše druge oglase.

Stanje: rabljeno, Leto izdelave: 2025, Filtration system, immediately available! NEW in original packaging! 1.1. STfp-rFan DER4 450/550/18.5-2 | incl. backdraft damper Extraction fan, "DER4" series for clean-air side installation, single-sided suction, direct drive. Key design features: - Scroll housing made of galvanized sheet steel, pre-configured for horizontal installation in MultiStar series filters - IEC standard motor - High-performance impeller with backward-curved blades, designed for clean-air extraction - Suction nozzle with spark protection strip - Impeller made of welded steel, statically and dynamically balanced Note: For explosion protection reasons, the fan is not suitable for conveying explosive dust/air mixtures! Technical data and performance: - Max. permissible airflow: 15,000 m³/h - Total pressure increase: 3,000 Pa - Inlet nozzle: 450 mm diameter - Outlet nozzle: 450 mm x 355 mm - Drive motor: 18.5 kW, 3000 rpm at 50 Hz | 3600 rpm at 60 Hz - Voltage / Frequency: 400 V, 50 Hz - Motor efficiency class: IE3, premium efficiency - Weight, approx.: 330 kg - Direction of rotation: RD 0 1.1.1. ST cold conductor 18.5 kW 1.2. ST MultiStar VR 6.6-195.25317A MultiStar filter in modular design, with vibration cleaning for installation outside hazardous explosive areas. Design features: - Galvanized, self-supporting sheet steel construction - Pressure surge resistance 200 mbar (certified by DEKRA—test report 342863200a-23ExA-Sip) - Maximum housing underpressure resistance: 5,500 Pa (avoid pulsating stress) - EC type-approved burst disks - Filter section with weather protection cladding, inspection door(s) and required number of exhaust outlets (depending on air volume) - Fire resistance EW 90ef, MPA-certified - Clean air outlet as per project drawing - BG-tested needle felt filter media, suitable for wood and paper dust and many other dust types - Filter bags externally loaded, with re-usable internal support elements - Filter cleaning during system downtimes - Expansion chamber for pre-separation The permissible fill height of the expansion chamber depends heavily on the material characteristics (bulk density, particle size, tendency to bridge, etc.) and is approx. 400...700 mm. - Inspection door with window and limit switch - Connection shaft for rotary valve or similar Technical data and dimensions: - Filter area: 195 m² - Filter bags: 144 units - Filter bag length: 2,530 mm - Bag diameter: 170 mm - Shaker unit: 0.18 kW, 400 V, 50 Hz – 1 unit - Agitator drive: 1.50 kW, 400 V, 50 Hz - Base area, L x W: 2,880 mm x 2,880 mm - Space requirement, L x W: Refer to plant drawing - Height: 9,110 mm Also included in delivery: - Dry riser fire extinguishing system, consisting of: o C-hose connection with blind coupling* o Riser pipe from bottom edge of filter o Distributor pipe system with spray nozzles Ihedpfx Afex U Egre Tjt o Instruction sign Note: According to DIN EN 12779:2016 Sec. 5.4.2.3, the water connection must be located 0.4 m to 0.8 m above the floor and must be safe and easily accessible for connection of a fire hose in case of fire. The BGHM also recommends installation of a dirt trap in the riser pipe. The necessary components, materials, and labor for this are not included in the base price of the dry riser and must be provided separately by the customer or as a custom installation with a special height of 3,000 mm. The subframe is not included in the scope of delivery and is specified separately. 1.2.3. ST Additional S

Stanje: dober (rabljeno), Leto izdelave: 2009, Ventilator za odsesavanje prahu, sistem za odsesavanje, ventilator za prah, odsesovalna naprava, naprava za odsesavanje prahu, ločevalnik, filter za varilni dim, odsesavanje varilnega dima, ventilator za dimne pline, filtrirna naprava, kartušna naprava za odstranjevanje prahu, kartušni filter, kartušni filter -Proizvajalec: HPS, filtrirna naprava s kartušnim filtrom serija ECO -Tip: Aerodust Eco 1/1 - 3000 U -Moč motorja: 2,2 kW -Volumenski pretok: 3000 m³/h -Odprtina: Ø 250 mm / 200 x 200 mm -Dimenzije: 1120/1040/H2680 mm -Transportne dimenzije: 2680/1040/H1120 mm -Teža: 579 kg Ihedjyapxuepfx Af Tet

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, With stainless steel square tube frame 15 pressing rollers 2 post-press rollers Electrically driven with stepless speed control Belt width 1500 mm Integrated high-pressure belt cleaning Brush cleaning for upper and lower belt Isdpfeclt Sbex Af Toht Belt tensioning and tracking pneumatically and infinitely adjustable Removable dosing hopper Automatic control for juice pump Main drive motor power 3 kW Brush motor power 0.37 kW High-pressure belt cleaning motor power 0.32 kW Hourly capacity up to 15,000 kg, depending on fruit variety Weight 4.5 tons Control panel on the left or right, in the direction of material flow

Stanje: rabljeno, Leto izdelave: 2018, Nazivni volumenski pretok: 5087 m³/h Podtlak (Pa): 2300 Motor: 7,5 kW Dimenzije: 1080 x 820 x 860 mm Teža: 154 kg Skladiščna lokacija: Nattheim Ihodpfxjvxk Anj Af Tst

Stanje: novo, Leto izdelave: 2025, Nova naprava Leto izdelave: 2025 Isdpfxjx Rpfwe Af Toht Oprema v skladu s potrditvijo naročila A2024-????

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Lenze E94AZMS0094 omrežni filter za enojni pogon. Ijdpfxetvz Hts Af Toht Ir: 9A U: 3x 500 V AC f: 50–60 Hz L: 3,5 mH Naprodaj sta 2 omrežna filtra. Cena na kos: 425 EUR. Dobro delujoče stanje. Prosimo, oglejte si še naše ostale oglase.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: nepreverjeno, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Fotometer za filtriranje Lasa 100 Proizvajalec: Dr. Bruno Lange Dr. Lange Enožarkovni filter fotometer – prenosni laboratorijski fotometer, analizna naprava za različne vode analize afotometer, okrogle kivete, nosilec kivete, napajalnik, električni priključek z vtičnim napajalnikom (ohišje poškodovano, vendar deluje), zaščitni pokrov pred prahom, navodila za uporabo Ozadno osvetljen zaslon Test kivete Vgrajen čitalnik črtne kode za samodejno prepoznavanje testov Občutljiva optoelektronska merilna naprava z optičnim filtrom in senzorji Rabljen aparat iz naše zaloge deluje in daje rezultat, katerega zaradi nepoznavanja ne moremo preveriti. Cena / podrobnosti na zahtevo Ihjdpoxw Uq Nsfx Af Tjt Pridržujemo si pravico do napak/napisnih napak v vseh tehničnih podatkih. Prodajamo izključno samo v države Evropske skupnosti.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Predmet moje dražbe je tračni transporter dolžine 6,5 m in širine traku 0,5 m Ihodpfora Dufsx Af Tst Možnost prevoza.

Leto izdelave: 2022, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Filter noch unbenutzt, originalverpackt. Modell: NYB‑30 Filterfläche: 30 m² Kuchenvolumen: ca. 600 L Durchsatzleistung: 6–8 t/h (Rohöl) Betriebsdruck: 0,1–0,4 MPa (max. 0,5 MPa) Manteltemperatur: ≤ 150 °C Behältervolumen: ca. 2.300 L Gewicht: ca. 2.500 kg Manteldurchmesser: ca. 1.200 mm Plattenabstand: 70 mm Anschlüsse: DN 50 Zulauf/Ablauf, DN 40 Überlauf, DN 500 Austrag Gesamthöhe: ca. 3.150 mm Hauptmerkmale: - Hermetisch abgedichtete vertikale Bauweise – kein Austritt, keine Geruchsbelästigung - Hohe Filtrationsgenauigkeit – ideal für Vorentschleimung und Nachbleichung bei Rohölen - Wartungsarm – lange Lebensdauer der Filterplatten - Einfache Kuchenentladung – hydraulische oder manuelle Vibrationsentleerung - Optional doppelwandig ausführbar – Beheizung für wachshaltige Öle möglich - Filterhilfsmittelgeeignet – unterstützt die Verwendung von Bleicherde oder Kieselgur Typische Einsatzbereiche: - Klärung von Rohöl nach Sedimentation - Filtration von Bleicherde (nach dem Bleicherbehälter) - Feinfiltration nach Entschleimung oder Neutralisation Ihsdpfx Aswwmziof Tjt - Winterisierung vor der Entwachung - Vorfiltration für Lebensmittel-, Biodiesel-, und kosmetische Öle

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Professional mobile filtration unit for welding fume extraction with high-performance extraction arm Suitable for welding processes: MMA, MIG, MAG, TIG, Plasma Cutting Extraction capacity max. 2,500 m³/h Extraction arm length: 3 m Motor power: 1.1 kW Connection voltage: 230 V / 50 Hz Sound pressure level approx. 73 dB(A) Filter area approx. 14 m² Powder-coated steel housing with wheels and handles. Digital control panel with alarm log, operating hours counter, and filter monitoring. The electronic circuit board is housed separately and protected from the airflow. High-performance fan located downstream of the filters in a dedicated sound-insulated compartment. Ihsdsvnzwzspfx Af Tet Spark protection filter installed as standard. On request, a set of activated carbon filters (10 kg) can be installed, which is particularly required for SOV/VOC, stainless steel, and galvanized steel applications.

Leto izdelave: 2009, Stanje: rabljeno, KSS-/filter-/hladilni sistemi Ihjdpfew Tbnujx Af Tet Emulzija

Stanje: novo, Adapter za sterilni filter Miltenyi Biotec 170-076-610 rok uporabe 24.02.2026 – 50 škatel, 5 kosov na škatlo, cena velja za eno škatlo. Iedevv Nqfepfx Af Tjht

Stanje: dober (rabljeno), Leto izdelave: 2013, Filter za varilni dim, odsesavanje varilnega dima, odsesavanje lotilnega dima, mali odpraševalec, mobilna filtrirna enota, filtrirna naprava za mobilno odsesavanje varilnega dima, odsesovalec varilnega dima -Proizvajalec: Kemper, mobilno odsesavanje varilnega dima tip 62150 -Pogon: 1,5 kW -Volumenski pretok: 1000 m³/h -Odsesovalna roka: Ø 155 mm x 4200 mm -Transportne dimenzije: 770/690/V1455 mm -Teža: 174 kg Iedpfxox Swlbo Af Teht

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Predmet moje dražbe je tračni transporter dolžine 1x3 m in širine traku 0,4 m. Možnost prevoza. Ihsdpfxst R R T Ts Af Tjt

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Stroke 500 mm Ihjdpfx Aevn U S Sof Tst Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Table height 1000 mm Stroke and pressure shut-off Working feed 10 mm/s

Stanje: novo, Leto izdelave: 2026, Robust construction allows machining of longer workpieces. Grinding unit is tiltable, making the machine also usable as an edge sanding machine. 225 mm large, precision-balanced belt drive rollers ensure low-vibration operation. Easy belt alignment adjustment. High belt speed of 17 m/s. Right/left belt run. Top sanding shoe with graphite coating. Sanding shoe with 4-way spring suspension. Equipped with a movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy loads from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Standard with electric table height adjustment. Split table with flip-up function for specialized edge sanding. Drawer sanding device. Integrated work table lighting. Features and Equipment 225 mm large, precision-balanced belt drive rollers ensure optimal, low-vibration power transmission. Belt speed: 17 m/s. Ihodpeff Hdfofx Af Tjt Professional tiltable sanding shoe for bevelled surfaces (4-way spring suspension). Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with integrated drawer sanding device. Split table with flip-up functionality for specialized edge sanding applications. Dimensions and Weights Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Work Table(s) Table height adjustment: 550 mm Table transverse travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Grinding Unit Abrasive belt length: 7000 mm Abrasive belt width: 150 mm Belt speed(s): 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Leto izdelave: 1990, Stanje: rabljeno, Filter za MS-avtomate, nanosni filter za olje 2.100 l/min Isdpfx Aow T Tn Hef Tsht

Stanje: dober (rabljeno), Leto izdelave: 2008, Filter za dim pri varjenju, odsesavanje varilnega dima, odsesavanje dima pri spajkanju, mali odpraševalnik, mobilna filtrirna enota, filtrirna naprava za mobilno odsesavanje varilnega dima, odsesovalnik varilnega dima -Proizvajalec: Kemper, mobilna odsesavanje varilnega dima tip 62150 -Pogon: 1,5 kW Isdpfjx Swkkjx Af Teht -Volumski pretok: 1000 m³/h -Odsesovalna roka: Ø 155 mm x 4200 mm -Transportne mere: 770/690/V1455 mm -Teža: 186 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Prodajam tračni transporter, viden na fotografijah. Dolžina približno 30 m, širina traku 0,8 m. Transporter je deloval približno 3 leta. Zelo dobro ohranjen. Za več informacij prosim kontaktirajte. Možnost prevoza. Isdpoulghvefx Af Tsht

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Ram surface 860x620 mm Table height 900 mm Manual lever operation Iedpevnwfnefx Af Toht Pressure cut-off

Stanje: novo, Leto izdelave: 2026, Quick-release belt tensioning via lever Upper belt support with graphite coating 250 mm large, balanced belt drive rollers ensure optimal power transmission. With electric height adjustment With dust extraction and noise protection devices With noise protection certificate With two speeds Tilting sanding shoe adapts to surfaces Beveled surfaces Standard with right and left run The quick-release belt tensioning enables fast and easy sanding belt changes. Delivery is partially assembled Dimensions and Weight Length approx. 4540 mm Width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Worktable(s) Worktable height adjustment: 620 mm Maximum working width on table: 900 mm Electrical Data Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phase(s): 3-ph Current type: AC Mains frequency: 50 Hz Sanding Unit Ijdpfx Afjff Hdbj Tsht Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece Max. height: 590 mm Max. height workpiece longer than worktable: 180 mm Explanation regarding max. height of workpiece longer than worktable: Processing of the workpiece with an overhang to the right beyond the worktable is possible.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Predmet moje dražbe je tračni transporter dolžine 1,7 m in širine traku 0,9 m. Možnost prevoza. Ihjdpswz Uhrefx Af Tst

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Ihjdpjgf Sw Nsfx Af Tst Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Prodam transportni trak, viden na sliki. Vabljeni k stiku. Ihodpfevb Ilfjx Af Tjt