Sistem filtrov in vreč

AL-KO

Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable Dodpfxocggy Ss Afnscd - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: rabljeno, Leto izdelave: 1996, Premer sesalnega nastavka: 160 mm Maksimalni volumenski pretok: 1770 m³/h Nazivni volumenski pretok: 1448 m³/h Dcsdpjyffx Iofx Afnod Nadzor volumenskega pretoka: prikaz diferenčnega tlaka Podtlak: 1570 Pa Filtrirna površina: 10,5 m² Preostanek prahu: manj kot 0,2 mg/m³ Raven zvočnega tlaka: Prostornina vreče za odrezke: Čiščenje filtra: pnevmatično, jet čiščenje Moč motorja: 2,2 kW Dolžina stroja: 1600 mm Širina stroja: 700 mm Višina stroja: 2200 mm Teža:

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid Dsdpfxofyadbs Afnjcd • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Stanje: novo, Leto izdelave: 2026, - Capacity: 1.2 mm - Working width: 250 mm Dcedpfxegg Nrko Afned - Supplied with 8 sets of rollers

Stanje: rabljeno, Leto izdelave: 1996, Premer sesalnega nastavka: 160 mm Maksimalni volumenski pretok: 1770 m³/h Nazivni volumenski pretok: 1448 m³/h Nadzor volumenskega pretoka: prikaz diferenčnega tlaka Podtlak: 1570 Pa Filtrirna površina: 10,5 m² Preostanek prahu: manj kot 0,2 mg/m³ Raven zvočnega tlaka: Prostornina vreče za odrezke: Čiščenje filtra: pnevmatično, jet čiščenje Moč motorja: 2,2 kW Dolžina stroja: 1600 mm Širina stroja: 700 mm Višina stroja: 2200 mm Teža: Dcjdpfsx Edmpox Afned

Stanje: novo, with compressed air cleaning and frequency converter Startup via frequency converter, pressure transmitter for demand-driven regulation Pre-separator integrated, extinguishing system integrated Dodpfx Aexpximofnocd Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet highly effective: OPTI JET cleaning and bag filter with snap ring fastening. Exceptionally efficient: Energy-efficient drive systems according to IE3. Safe in emergencies: Maintenance-friendly automatic extinguishing system. Exceptionally quiet: Sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options available, from machine recognition and slide gate control to frequency-controlled operation, to name just a few examples. Nothing is left to chance: Collection container with inspection window. Practical down to the details: Container locking with ergonomically shaped tension lever. Easily upgradable: Retrofitting for discharge via briquetting press or rotary valve possible. - high extraction capacity - compact footprint - 100% air recirculation with no temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimum filter cleaning - minimal noise level - optional: patented level monitoring - maintenance-friendly, certified automatic fire extinguishing system - dust barrier for dust-free container change - (optional: container safety interlock) - freely configurable and expandable module exchange ----- Technical Data ----- Extraction nozzle Ø: 350 mm, Nominal air flow: 6,927 m³/h, Max. air flow: 8,500 m³/h, Max. negative pressure: 2,543 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pcs, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Stanje: rabljeno, številka stroja/vozila: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 knife rotor (staggered arrangement) 2 rows of stator knives Infeed opening approx. 600 x 800 mm Dcedpeghgqajfx Afned Drive motor: 55 kW Equipped with soundproof enclosure, mobile

Stanje: novo, with compressed air cleaning and frequency inverter Start-up with frequency inverter, Pressure transmitter for demand-oriented regulation Integrated pre-separator, Integrated automatic extinguishing system Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for highly effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet highly effective: OPTI JET cleaning system and filter bags with snap ring closure. Extremely economical: Energy-efficient drives compliant with IE3. Reliable in emergencies: Maintenance-friendly automatic extinguishing system. Exceptionally quiet: Sound-insulated air recirculation by AL-KO. Full flexibility: PLC control for manual and automatic operation. Countless options available, from machine recognition and slide gate control to frequency-controlled operation, to name just three. Nothing gets missed: Collection container with inspection window. Attention to detail: Container lock with ergonomically shaped tension lever. Expandable at any time: Retrofit for discharge via briquette press or rotary valve possible. - High extraction capacity - Space-saving design - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system Dcodpfjwzyh Rsx Afnsd - Optimum filter cleaning - Minimal noise level - Optional: Patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free container changes - (optional: Safety lock for containers) - Freely configurable module replacement and extendable design ----- Technical Data ----- Suction nozzle Ø: 355 mm, Nominal volumetric flow: 7,127 m³/h, Max. volumetric flow: 10,000 m³/h, Max. negative pressure: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 units, Motor 400 V: 15.0 kW, Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Weight: 1,064 kg, according to: GS - HO - 07

Stanje: novo, - mobilna izvedba - visok ločevalni učinek, velika moč odsesavanja - enostavno upravljanje - dolga življenjska doba filtrov, zato malo izpadov - prilagodljiv zaradi odsesovalne tehnike s sistemom prednje pločevine - certificirano za ATEX cona 2 ----- Tehnični podatki ----- Zračni pretok: 4.600 m³/h, uporabni tlak: 500 Pa, površina filtra s predfiltrom in finim filtrom: 1 m², priključni Ø: 300 mm, motor 400 V: 1,5 kW, številokratski motorja: 1.410 min⁻¹, Dcedpfx Afou T Hrpsnod dimenzije (D x Š x V) odprto: 1.897 x 1.405 x 1.144 mm, dimenzije (D x Š x V) zaprto: 1.012 x 1.405 x 912 mm, teža: 175 kg + 5 m kabel s priključkom in dušilno loputo

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 Dodod H Rf Tjpfx Afnscd • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: novo, AL-KO POWER UNIT 250 P - Razstavni stroj - Vgrajen predločevalec, vgrajen samodejni gasilni sistem Dsdpfjwu Hatsx Afnscd ----- Tehnični podatki ----- Sesalni priključek Ø: 250 mm, Nazivni pretok zraka: 3.534 m³/h, Maks. pretok zraka: 4.900 m³/h, Maks. podtlak: 3.184 Pa, Filtrirna površina: 22,4 m², Prostornina zbiralnika ostružkov: 2 x 250 litrov, Število vreč: 2 kosa, Motor 400 V: 7,5 kW, Dimenzije (D x Š x V): 2.351 x 1.058 x 2.361 mm, Zvočni tlak: 71 dB(A), Teža: 758 kg, po: GS - HO - novi razstavni stroj -

Stanje: novo, Pre-separator integrated Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with rapid-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Exceptionally economical: Energy-efficient drives in accordance with IE3. Safety first: Maintenance-friendly automatic fire extinguishing system. Exceptionally quiet operation: Sound-insulated air recirculation by AL-KO. Flexible control: PLC control system for manual and automatic operation. Countless options available: From machine recognition and slide gate control to frequency-controlled operation, to name just a few. Dcsdju R S A Rspfx Afnsd No risk of spillage: Collection container with inspection window. Practical down to the last detail: Container locking system with ergonomically shaped tension lever. Retrofittable: Can be converted for discharge via briquette press or rotary valve. - High suction performance - Minimal space requirement - 100% air recirculation with no heat loss (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free container changeover - (Optional: safety lock for containers) - Freely configurable modular design – expandable and upgradable ----- Technical Data ----- Extraction nozzle Ø: 300 mm Nominal air flow: 5,089 m³/h Maximum air flow: 6,000 m³/h Maximum negative pressure: 2,587 Pa Filter area: 30 m² Chip/dust collection capacity: 3 x 250 litres Number of bags: 3 pieces Motor 400 V: 7.5 kW Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm Sound pressure level: 71 dB(A) Weight: 838 kg Compliant with: GS - HO - 07 - new display machine -

Stanje: novo, Leto izdelave: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION ACCURACY, OPERATING IN FULL INTERPOLATION ON EACH AXIS X, Y, AND Z. The machine has an 'Innovation Certificate', which facilitates securing EU co-financing for your purchase. High-quality CNC milling machine designed for subtractive material processing. Thanks to a wide range of configurations, it is suitable for use in numerous industries: industrial, electronic, welding, woodworking, advertising, and more. These are efficient and precise machines equipped with user-friendly CNC control systems, making them easy to operate for both experienced and novice operators alike. Operator training included in the price at our headquarters! MACHINE AVAILABLE IMMEDIATELY! Technical Specifications: Spindle: 5.5kW / 18,000 rpm, inverter-controlled, air-cooled Working area: 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle clearance: 350 mm Control system: DSP Programmable resolution: 0.001 mm Software: INCLUDED Power supply: 400V Weight: 1450 kg Machine dimensions: 2680 x 3600 x 2200 mm Table height: 715 mm Djdpsg Ngixofx Afnscd Vacuum pump: 7.5 kW Vacuum: 440 mbar Guide rails: linear Drive transmission: rack and pinion (Z axis – ball screw) Axis drives: hybrid servo drives NOTICE! The machine is equipped with a function to memorize the last G-code path. In the event of a power failure or interruption, it resumes operation from the last point—without losing time or material. Optional Equipment: Vacuum pump: Becker KVT 3.140 129 m3/h Highest-class protective barriers: - Highest quality light safety barriers optionally available. - Safety zone defined by sensors prevents entry into the machine’s working area. - Complete barrier set ensures operator safety. Gantry elevation in Z axis up to 450 mm UCANCAM V11 software (supports import of files from Corel, AutoCAD). Import/export of files, editor, and text input. Tool set: milling cutters, drills, holders. *Unloading and positioning of the machine are the client’s responsibility. Standard Equipment Includes: - Air-cooled spindle, Premium version - Hybrid servo drives - Raised gantry in Z axis to 350 mm - Vacuum table – 4 independent vacuum zones + T-slot table for manual material clamping (holders included) - 5.5 kW vacuum pump already included in the price - Tool measuring sensor included - Software included - Tools, set of collets, leveling feet, and other accessories - DSP control system – digital data processing - Machine equipped with last G-code path memorization – in case of failure or power outage, resumes work from last point, preventing time and material loss. Price shown is NET (excl. VAT). Price does not include transport costs. For more information, we encourage you to contact us by phone or email. Please also visit our website for a full overview of our offer.

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: Djdpfx Ajyk I U Aofnjcd with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring