Otec nakup rabljenega (751)

Stanje: novo, Leto izdelave: 2025, skupna masa: 3.000 kg, Stebrna dvigovalna rotacijska naprava, nosilnost 3 tone Protec obračalna naprava / pozicioner Syncrolift Dvojni steber, ročno daljinsko upravljanje brezžično in ročno Stebrna nastavitev 2-krat mobilna Nosilnost 3000 kg, 360° Cgedpox Thq Rsfx Aa Ssn Minimalna delovna višina: 600 mm Maksimalna delovna višina: 1500 mm Hitrost: 0,5 obr/min Premer vpenjalne plošče: 600 mm Rotacijsko gibanje: 0,75 kW Navor: 5180 N-m Na zahtevo je možna nosilnost od 2 do 10 ton

Stanje: novo, Leto izdelave: 2025, nosilnost: 5.000 kg, 1-stebrično dvižno-rotacijsko napravo, nosilnost 5 ton Mono, premična, dvigovanje in vrtenje Protec obračalna naprava / pozicioner Syncrolift Pogonski steber z nastavljivo višino, brezžični in ročni daljinski upravljalnik Električna nastavljivost stebra z električnim vozičkom Nosilnost 5000 kg, 360° Minimalna delovna višina: 800 mm Maksimalna delovna višina: 1700 mm Hitrost: 0,5 obr/min Premer vpenjalne plošče: 900 mm Moč vrtenja: 2,2 kW Cedpex Thnpofx Aa Segn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, številka stroja/vozila: S36-0685, mit Rip und Absaugevorrichtung (S. Nr.: 01422-11122) Lasertyp: CO2 Laserleistung CO 2: 80W Arbeitsfläche: 813 x 508 mm Ladefläche: 890 x 600 mm Max. Werkstückhöhe: 210 mm mit 1.5 Zoll, 2.0 Zoll Linse 197,5 mm mit 2.0 Zoll Abstandslinse, 2.5 Zoll Linse 159 mm mit 4.0 Zoll Linse Bearbeitungstisch: Multifunktionales Tischkonzept Lineale in mm oder Zoll Elektronische, programmierbare Z-Achse mit Servomotor Max. Prozessgeschwindigkeit: 355 cm/s Max. Beschleunigung: 50 m/s² Motor: Bürstenloser DC Servomotor Encoder: Inkrement Optische Elemente: Teleskop, Linse und Spiegel Linsen: 1.5 Zoll, 2.0 Zoll, 2.0 Zoll Abstandslinse, 2.5 Zoll, 4.0 Zoll Wiederholgenauigkeit: +/- 0.015 mm (0.0006 Zoll), über ganze Arbeitsfläche Adressierbare Genauigkeit: 5 µm (0.0002 Zoll) Genauigkeit der Teilegröße: Abhängig von Material und Prozeß Cgodpfsxcalvex Aa Sen Max. Belastung des Bearbeitungstisches: Statisch: bis zu 100 kg / Dynamisch bis zu 30 kg, Belastung über gesamte Arbeitsfläche Interface: USB

Stanje: novo, Leto izdelave: 2025, nosilnost: 10.000 kg, vrtilni razpon: 135 °, Oprema: nožno daljinsko upravljanje, 3-osni varilni obračalni stroj Protec KT 10 000 HV Kompletni set vključno z ročnim in dvojnim nožnim daljinskim upravljalcem Digitalni prikaz hitrosti Hidravlično nastavljanje višine Cgodoxt Tgnspfx Aa Ssn Nagibni razpon od 0 do 130° Dimenzije: Minimalna višina v nagibu: 1050 mm Maksimalna višina v nagibu: 2200 mm Minimalna višina v vodoravnem položaju: 1360 mm Premer vpenjalne plošče: 2000 mm Dolžina: 3250 mm, širina: 1700 mm Hitrost od 0,05 do ca. 0,6 obr/min (možno do 1,2 obr/min)

Stanje: novo, Leto izdelave: 2025, nosilnost: 15.000 kg, Stebrni dvižni obračalni mehanizem 15 ton nosilnosti kot komplet ali posamezno 2 strani poganjani Stroj je na voljo kot sinhroniziran komplet ali posamično Protec obračalna naprava / pozicionirnik Syncrolift Dvojni steber, ročno daljinsko upravljanje brezžično in ročno Cgsdpfx Aew Nilaea Son Nastavitev stebrov 2x električno pomična Nosilnost 15.000 kg, 360° Navor 21.000 Nm Minimalna delovna višina: 800 mm Maksimalna delovna višina: 1.700 mm Hitrost 0,5 obr/min Premer vpenjalne plošče 1.000 mm Pogon obračanja 2 x 2,2 kW Cena se nanaša na eno enoto z vključenim električnim vozičkom Druga enota kot komplet je 20 % cenejša Po želji z zglobno prirobnico (kardanflansch)

Stanje: novo, Leto izdelave: 2025, nosilnost: 1.200 kg, 1200 kg nosilnosti, varilna obračalna miza, CE certifikat Nosilnost vodoravno 1200 kg Nosilnost pri nagibu 1200 kg pri težišču bremena 250 mm Cgodpfx Aexq S Nija Sjn Zelo robustna Hitrost brezstopenjsko nastavljiva od 0,05 do 0,7 vrt/min (za manjše doplačilo je mogoče več obratov) Premer obračalne mize 1200 mm Naklon do 120° Višina vodoravno 1.050 mm, nagnjeno do sredine 880 mm Ročno in nožno daljinsko upravljanje Dolžina 1,35 m x širina 1,2 m Vpenjalna glava oziroma hitro vpenjalna glava glede na velikost za doplačilo Kot prikazano premer 1000 mm, cena 2.900 € (posebna cena, prodaja samo v kombinaciji z varilno obračalno mizo) Protiležaj s stopnjami 480 €, protiležaj z nastavitvijo navoja 880 €, nosilnost 4.000 kg

Stanje: novo, Leto izdelave: 2025, nosilnost: 10.000 kg, Stebrna dvižna in vrtljiva naprava s nosilnostjo 10 ton, na voljo kot set ali posamično. Pogon na obeh straneh. Stroj se ponuja kot sinhroniziran set ali posamično. Protec obračalna naprava / pozicioner Syncrolift. Dvojni steber, ročni daljinski upravljalnik brezžični in ročni. Nastavitev stebrov 2x električno prestavljiva. Nosilnost 10.000 kg, 360°. Minimalna delovna višina: 800 mm. Maksimalna delovna višina: 1700 mm. Hitrost 0,5 obr/min. Premer vpenjalne plošče: 900 mm. Vrtljivi pogon: 2 x 2,2 kW. Navor: 18.950 Nm. Stroj je na voljo tudi samostojno kot Mono model (cenovno ugodnejši). Po želji z zglobno prirobnico (kardanska prirobnica). Codsx Tcm Tjpfx Aa Sjgn

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni stroj za mikroudarno označevanje PRO PEN P5000 (GravoTech Marking SAS), ki ga distribuira skupina HAHN+KOLB. Povsem industrijska oprema, namenjena trajnemu označevanju kovinskih in plastičnih delov – serijske številke, logotipi, kode, proizvodne oznake. Tehnični podatki: • Model: Propen P5000 Pn/d • Leto izdelave: 2010 • Napajanje: 100–240 V, 50/60 Hz • Moč: 150 W • Obratovalni tlak: 5,5 bara (pnevmatski pogon) • Proizvajalec: GravoTech Marking SAS, Francija • Operaterska plošča z zaslonom na dotik + tipkovnica HP • Stabilna delovna miza z vodili. Stroj je popoln, delujoč in pripravljen za takojšnjo uporabo. Idealen za delavnice, proizvodne obrate, orodjarne in povsod, kjer je zahtevano hitro in natančno trajno označevanje. Zelo dobro stanje – naprava je vzdrževana, z minimalnimi sledmi uporabe. Cgedpfx Aew R Spqea Sjn

Stanje: rabljeno, Leto izdelave: 1996, The semi-automatic screen printing machines Vipromat-S, manufactured by Viprotech in 1996, are currently produced in Germany. These machines offer a format of 700 x 1000 mm and can handle a maximum sheet size of 885 x 1250 mm with a maximum material thickness of 25 mm. The maximum print area is 700 x 1000 mm, and the largest frame size accommodated is 1125 x 1500 mm. Air consumption is rated at 6 bar, 20 nl/min, and the squeegee angle is adjustable from 75 to 90 degrees. Off-contact is variable between 3 and 28 mm, and fine registration adjustment is available. The squeegee speed can be set between 0.2 and 1.2 meters per second, allowing for up to 850 prints per hour. The machine dimensions are 170 cm in length and 160 cm in width, with a weight of 435 kg. Electrical connection required is 230 V, 50 Hz, 1ph+N+Pe, with a total power consumption of 3 kW. Delivery conditions are FCA (Free Carrier), which means the seller delivers the goods to the carrier designated by the buyer at the seller’s premises. Key Specifications: Cedpfxevfxp Aj Aa Ssgn Format: 700 x 1000 mm Width: 160 cm Length: 170 cm Max. frame size: 1125 x 1500 mm Max. print size: 700 x 1000 mm Max. sheet size: 885 x 1250 mm Off-contact (variable): 3 – 28 mm Air consumption: 6 bar, 20 nl/min Squeegee speed: 0.2 – 1.2 m/s Squeegee angle (adjustable): 75 – 90° Electrical connection: 230 V, 50 Hz, 1ph+N+Pe, 3 kW Fine registration adjustment Max. material thickness: 25 mm Machine weight: 435 kg Max. output per hour: 850 prints Semi-automatic screen printing machines

Stanje: rabljeno, Leto izdelave: 1996, The semi-automatic screen printing machines Vipromat-S, manufactured by Viprotech in 1996, are currently produced in Germany. These machines feature a format of 700 x 1000 mm and can handle a maximum sheet size of 885 x 1250 mm with a maximum material thickness of 25 mm. The maximum print area is 700 x 1000 mm, while the maximum frame size is 1125 x 1500 mm. Air consumption is rated at 6 bar and 20 nl/min, and the off-contact distance can be adjusted from 3 to 28 mm. Fine registration adjustment is possible (value not specified). Squeegee speed is adjustable between 0.2 and 1.2 meters per second, allowing for a maximum output of up to 850 prints per hour. Machine dimensions are 170 cm in length and 160 cm in width, with a weight of 435 kg. The squeegee angle is adjustable between 75 and 90 degrees. Required electrical connection is 230 V, 50 Hz, 1ph+N+Pe, 3 kW. Delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller’s location. Specifications: - Format: 700 x 1000 mm - Equipment: Semi-automatic screen printing machines - Maximum print area: 700 x 1000 mm Cedpfovfx Hzex Aa Sogn - Maximum frame size: 1125 x 1500 mm - Maximum sheet size: 885 x 1250 mm - Maximum material thickness: 25 mm - Off-contact adjustable: 3–28 mm - Maximum prints/hour: 850 - Fine registration adjustment - Squeegee speed (m/sec): 0.2–1.2 - Squeegee angle adjustable: 75–90° - Machine weight: 435 kg - Electrical connection: 230 V, 50 Hz, 1ph+N+Pe, 3 kW - Air consumption: 6 bar, 20 nl/min - Length: 170 cm - Width: 160 cm

Leto izdelave: 2016, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Estamos vendiendo nuestro sistema de sujeción de punto cero Parotec Powergrip como paquete completo o por piezas individuales. Los precios son negociables. Incluye: 1. Placa base del sistema de sujeción Parotec Powergrip con paso de 320 mm, incluidas 4 unidades Powergrip. Accionamiento manual y neumático. Dimensiones de la placa base: 475 mm x 475 mm x 50 mm. 2. Torre de sujeción 4 caras Norelem 4 superficies de sujeción de 580 mm x 300 mm con taladros roscados en retícula de 50 mm x 50 mm. La torre está equipada en la base con 4 adaptadores para el sistema de sujeción de punto cero Parotec Powergrip (paso de 320 mm). 3. 2 placas soporte de aluminio de 540 mm x 540 mm x 50 mm con retícula de roscado de 100 mm x 100 mm, incluidas tomas Powergrip paso 320 mm. 4. Placas soporte de aluminio incluidas tomas Powergrip paso 320 mm: - 1 placa de 540 mm x 540 mm x 50 mm Cgjdpfx Aexu Dmboa Ssn - 2 placas de 510 mm x 490 mm x 50 mm 5. 3 unidades centradoras masculinas Parotec Powergrip. ¡Sin uso! 4 receptáculos centradores femeninos Parotec Powergrip. ¡Sin uso!

Leto izdelave: 2007, Stanje: rabljeno, Sewing Line Meccanotecnica Multiplex SA Year of manufacture: 2007 Collating Machine: Raccoglitrice MX - Number of collating stations: 18 - Optical signature recognition Cgjdjt Sz T Hepfx Aa Son - Pump(s) - Distribution unit - Distribution transfer station after 2 sewing machines Sewing Machine (1) Meccanotecnica Aster 2000 Year of manufacture: 2007 - Colour monitor - Pre-loader - Optical signature recognition - 4 + 4 opening devices - Book block separator - Book stacker: Plus stacker Sewing Machine (2) Meccanotecnica Aster 2000 Year of manufacture: 2005 - Pre-loader - Optical signature recognition (BAK) - 4 + 4 opening devices - Book block separator - Book stacker: Plus stacker

Stanje: rabljeno, Leto izdelave: 2011, Sewing machine with inline endsheet feeder MECCANOTECNICA UNIVERSE Year of manufacture: 2011 Cgjdpfx Asu Utzyja Sen For high-quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Feeding of flat sheets, creasing, folding and gathering as well as sewing. The UNIVERSE endsheet feeder performs 2 operations: Pressing the folds and gluing the endsheets. Features: • Flat sheet feeder • Siemens PC with touchscreen • GigaLynx layer recognition • Folding and gathering station • Sewing machine • Delivery band • Transfer to endsheet feeder • Folding press • Endsheet feeder with hotmelt nozzle gluing system and ROBATECH pre-melter • Delivery belt (Counter reading approx. 9,700,000 sewings) Technical specifications: Flat sheet feeder output: up to 300 flat sheets (A4)/min Mechanical sewing speed: up to 50 folded sheets/min Maximum flat sheet size: 420 x 640 mm Minimum flat sheet size: 150 x 200 mm Maximum folded sheet size: 420 x 320 mm Minimum folded sheet size: 150 x 100 mm Maximum number of stitches: 10 . . . .

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Automatic Drum Plating Line for Zinc Plating GALWANOTECHNIKA (2018/2021) Summary of technical data (focus on components and performance): ● Machine type: automatic drum-type electroplating line (Zn – zinc plating). ● Manufacturer: GALWANOTECHNIKA. ● Year of manufacture: main structure 2018, major overhaul/upgrade in 2021 (documented). ● Capacity: approx. 220 tons/month (at 3-shift operation; suitable for nails/small parts). ● Condition: complete, fully operational, post-upgrade rated as very good. Key components included: ● Drums/drum assemblies for zinc plating: 7 pcs. (purchased new in 2021 for nail plating). ● Rectifiers (total 7 pcs.): Cedpfjxm Ttzjx Aa Segn ○ 6 units with 400A/1700A specifications (year 2017). ○ 1 unit 800A (year 2017). ● Process/rinsing tanks (total 17 pcs.): including zinc plating tanks, cascade rinsing tanks (3- and 2-station) and passivation tanks (year 2006 – as per statement). ● Automation: control cabinet/panel (2018), line transporters/hoists (2016). ● Wastewater treatment (LPW-ANLAGEN tanks): scrubber, fan, and complete wastewater treatment station. ● Auxiliary equipment (2021 modernization): full PE acid-resistant drip tray under the entire line, chemical laboratory with equipment. Commercial information: ● Documentation: DTR (Technical and Operating Documentation) available

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Oprema: - 1. Brusilni trak za brušenje/odstranjevanje robov - 2. 8 rotacijskih ščetk za zaokroževanje robov Cgjdpfex I Nugox Aa Ssn - 3. Brusilni trak za zaključni brus - Vakuumska miza za boljše držanje majhnih delov Tehnični podatki: Maks. širina obdelovanca: 1300 mm Hitrost transportnega traku: 0,5 - 7 m/min Maks. obremenitev mize: 700 kg Min. velikost obdelovanca (Š×D): 50×50 mm Maks. višina obdelovanca: 0,5 - 100 mm Mere brusilnega traku (D׊): 2200 × 1320 mm Rotacijske ščetke: 8 kosov Mere rotacijskih ščetk: 300² × 40 mm Električni vhod: 400V|50Hz|240A Nazivna moč: 79 kW Dimenzije stroja (D׊×V): 4,2×2,25×2,3 m Teža stroja: 5700 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, - Stroj z brusilnim trakom in rotacijsko krtačo - Magnetna sled Tehnični podatki: Cgsdpfxjx I Nu Hj Aa Sjn Maks. širina obdelovanca: 300 mm Maks. nosilnost mize: 100 kg Maks. višina obdelovanca: 0,5-100 mm Min. velikost obdelovanca (Š × D): 50×50 mm Hitrost transportnega traku: 0,5 - 7 m/min Mere brusilnega traku (D × Š): 1650 × 320 mm Rotacijska krtača: 300 × 40 mm (1 kos) Nazivna poraba energije: 11,5 kW Električni vhod: 400V|50Hz34A Dimenzije stroja (D × Š × V): 2,15×0,70×2,00 m Teža stroja: 1300 kg

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 3.350 mm, širina transportnega traku: 290 mm, hitrost transportnega traku: 30 mm/s, skupna dolžina: 2.450 mm, skupna širina: 650 mm, skupna višina: 2.250 mm, skupna masa: 125 kg, izpraznilna višina: 2.200 mm, moč: 0,18 kW (0,24 KM), Oprema: Na voljo je tipska ploščica, nujno zaustavitev, TAF-Artikelnummer: 1000005841 Hersteller: Trio-Technik Baujahr: 2010 Gesamtmaße (LxBxH) in mm: 2.450 x 650 x 2.250 Breite inkl. Wange in mm: 370 Breite inkl. Antrieb in mm: 600 Wangenhöhe in mm: 200 Förderlänge, gesamt in mm: 3.350 Förderlänge, horizontal in mm: 1.050 Förderlänge, vertikal in mm: 2.300 Förderbreite in mm: 290 Gurttyp: Kunststofflamellen / Gliederkettengurt Gurtbreite in mm: 300 Stollen (Höhe der Stollen/Stollenteilung) in mm: 45 / 360 Unterkonstruktion: rollbar / Höhenverstellbar Gleitfläche: Stahl Einlaufhöhe in mm: max: 400 min: 340 Auslaufhöhe in mm: max: 2.200 min: 2.140 Antrieb: Kopfantrieb Motortyp: Winkelgetriebemotor Motor-Daten: 60/50 Hz, 0,18/0,22 KW Fördergeschwindigkeit in m/s: 0,03 Gewicht netto in kg: 125 Besonderheiten: Programmierbare Taktsteuerung / Notaus Zustand: gebraucht / voll funktionsfähig Funktionstest: OK Cgjdpjxyk Ehsfx Aa Sen

Leto izdelave: 2005, Stanje: rabljeno, Thread sewing line Meccanotecnica Multiplex SA Year of manufacture: 2005 Comprising: Gathering machine: Raccoglitrice-MX Cgjdpfxovuzfrj Aa Sjn - Color monitor - Manual feed station: 2 - Number of gathering stations: 6 - Optical signature recognition - Pump(s) - Distribution unit: Cassettiera - Transfer station to thread sewing machine Thread sewing machine (1) Meccanotecnica Aster 180/42 Year of manufacture: 2005 - Pre-loader - Feeder - Optical signature recognition: Opticontrol - 4 + 4 opening possibilities - Plus stacker - Conveyor belt delivery

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 1.520 h, skupna masa: 235 kg, skupna višina: 1.055 mm, število osi: 3, This 3-axis Trotec Speedy 360 was manufactured in 2019 and features a robust CO₂ laser system with a power range of 40-120 W. It offers a maximum working area of 32 × 20 inches and supports a wide variety of materials with its multifunctional table options, including a vacuum table and a honeycomb cutting panel. This machine is ideal for precise cutting and engraving and includes JobControl® Expert software for enhanced operation. If you are looking for high-quality cutting capabilities, you should consider the Trotec Speedy 360 machine we have for sale. Contact us for further details about this machine. Additional Equipment • Autofocus: Light beam focus (electro-optical) • Positioning: Laser pointer (655 nm) Machine Advantages Technical Machine Benefits • Ergonomic access to the work area • Coaxial air assist • Optional equipment: protective gear, air assist, rotary device, JobControl® Vision, vacuum table, honeycomb cutting panel, special cutting tables • Extraction: surface extraction through the back of the engraving cabinet, table extraction with vacuum and cutting table • Laser safety: classification: CDRH laser safety, CE certified, laser class 2 • Laser safety features: dual interlock system, lid with side loading • Temperature: +15°C to +25°C • Humidity: 40% to max. 70% (non-condensing) • Dust-free environment: grade 2 according to IEC 60947-1 Additional Information Motion Working area: 813 × 508 mm Loading surface: 890 × 600 mm Max. workpiece height: With worktable: 210 mm Without worktable: 280 mm Motion system speed: 355 cm/sec Acceleration: 5g Workpiece Max. material load: Static: Up to 100 kg Dynamic: Up to 30 kg Table Worktables: Standard: Ferromagnetic engraving table Optional: Multifunctional table system and honeycomb cutting table Tools: Lenses: Standard: 2.0" Cgsdox U Th Repfx Aa Sen Optional: 1.5", 2.0" light disc, 2.5", 4.0" Dimensions Machine depth 1221 mm

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 2.730 mm, širina transportnega traku: 360 mm, hitrost transportnega traku: 50 mm/s, skupna dolžina: 2.730 mm, skupna širina: 490 mm, skupna višina: 1.620 mm, moč: 0,762 kW (1,04 KM), proizvajalec motorjev: BONFIGLIOLI, Oprema: Na voljo je tipska ploščica, TAF Article Number: 1000004806 Manufacturer: trio-technik Year of Manufacture: 1993 Overall Dimensions: 2,730 x 490 x 1,620 mm (LxWxH) Width incl. side panel: 490 mm Width incl. drive: 490 mm Side panel height: 80 mm Total conveyor length: approx. 2,820 mm Horizontal conveyor length: approx. 820 mm Vertical conveyor length: approx. 2,000 mm Conveyor width: 360 mm Belt type: PVC, cleated belt Belt width: 400 mm Cleats: H = 20 mm, cleat spacing = 400 mm Base frame: mobile, height-adjustable, max: 1,620 mm | min: 1,250 mm Drive: chain drive Motor: geared motor Motor data: 0.762 kW Conveying speed: 0.05 m/s, constant Net weight: 82 kg Special features: incl. ON/OFF switch Condition: Used / fully functional Function test: OK Csdpfxswgmrme Aa Sogn

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 3.100 mm, širina transportnega traku: 290 mm, hitrost transportnega traku: 30 mm/s, skupna dolžina: 2.400 mm, skupna širina: 650 mm, skupna višina: 2.300 mm, skupna masa: 160 kg, izpraznilna višina: 2.170 mm, moč: 0,22 kW (0,30 KM), proizvajalec motorjev: DRdrivers, Hersteller: Trio-Technik Cgodpfxsycr Tgs Aa Sjn Baujahr: 2010 Gesamtmaße (LxBxH) in mm: 2.400 x 650 x 2.300 Breite inkl. Wange in mm: 400 Breite inkl. Antrieb in mm: 600 Wangenhöhe in mm: 200 Förderlänge, gesamt in mm: 3.100 Förderlänge, horizontal in mm: 800 Förderlänge, vertikal in mm: 2.300 Förderbreite in mm: 290 Gurttyp: Kunststoff-Lamellen / Gliederkettengurt Gurtbreite in mm: 300 Stollen (Höhe der Stollen/Stollenteilung) in mm: 50, 360 Unterkonstruktion: rollbar Höhenverstellbar: / Gleitfläche: Stahl Einlaufhöhe in mm: max: 280 min: 250 Auslaufhöhe in mm: max: 2.170 min: 2.140 Antrieb: Kopfantrieb Motortyp: Getriebemotor Motor-Hersteller: DRdrives Motor-Daten: 50/60 Hz, 0,18/0,22 kW, 230/270 V Motor Position (in Förderrichtung) links Fördergeschwindigkeit in m/s: 0,03 Gewicht netto in kg: 160 Besonderheiten: Programmierbare, digitale Taktsteuerung, inkl. CEE-Stecker Zustand: gebraucht / voll funktionsfähig Funktionstest: OK

Stanje: dober (rabljeno), Leto izdelave: 2002, Lepilni vezalnik Eurotecnica 425 Cedpoyhcr Rofx Aa Segn Leto izdelave: 2002 Št. artikla: L832

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 58.764 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 502748, vpenjalna sila: 1.000 kN, premer vijaka: 30 mm, razmak između stupova: 420 mm, delovna prostornina: 144 cm³, tlak vbrizgavanja: 1,905 letvica, izmetalna sila: 41 N, hod izmetalca: 150 mm, odmični hod: 500 mm, dolžina plošče: 590 mm, širina plošče: 590 mm, vgradna višina: 250 mm, skupna dolžina: 4.550 mm, skupna širina: 1.450 mm, skupna višina: 2.000 mm, skupna masa: 4.800 kg, ogrevalna zmogljivost: 9 kW (12,24 KM), moč črpalke: 30.000 W, vrsta nastavitve višine: hidravlični, hod: 150 mm, višina orodja: 250 mm, teža orodja: 700.000 g, Oprema: dokumentacija / priročnik, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral devices The injection moulding machine is in good condition and ready for operation. Offered for sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all associated Wittmann peripheral devices can be included for an additional charge. We acquired the Demag ERGOtech in 2020 as part of our company expansion for a customer project and equipped it with appropriate Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and shows no defects. OPTIONALLY, we are also offering all related Wittmann peripheral equipment for sale: Peripheral devices from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: Cgodpstltvzjfx Aa Sen - 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l - 1 pc. Flow measurement – ultrasonic 140–180° - 1 pc. Digital interface 20mA - 1 pc. Packaging for temperature control unit List price: €6,980.00 Sales price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects List price: €4,750.00 Sales price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granulate - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granulate, hinged lid with built-in collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for installation of a separator of the 200 series - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused List price: €8,467.00 Sales price: €4,233.50 All prices are net, plus statutory VAT of 19%. PLEASE NOTE: The offer does not include relocation or transport costs for the machine. These can be offered and organised as an additional service if required. For further questions, please feel free to contact me directly at any time.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, delovna prostornina: 305 cm³, tlak vbrizgavanja: 2.050 letvica, injekcijska masa: 270 g, minimalna višina orodja: 275 mm, Demag IntElect 150/520-610 General Data Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Cjdpfsxxrr Tjx Aa Segn Operating hours: 26,500 h Clamping Unit Mould clamping system: 150/... Clamping force: 150 t Mould platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Maximum daylight between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic cylinder, standard L:D Three-piece ring non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Operating hours meter: 26,500 h - Increased maximum mould height (min. unchanged, max. increased) - Wear-resistant screw; bimetallic cylinder; standard L:D; screw diameter 45 mm - 3-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic core pulls on the moving platen, via separate hydraulic unit - Increased injection speed (300 mm/s) - Increased maximum mould height (min. unchanged, max. increased) Offer is for the injection moulding machine only

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S36-0330, Description For sale is a Trotec Speedy 360 CO₂ laser with 80 W laser power, previously used in professional production. This machine is suitable for engraving and cutting a wide range of materials, including wood, acrylic, plastics, paper, leather, textiles, and similar materials. Cedpfjxz Ekhjx Aa Sjgn The working area of 813 × 508 mm enables efficient processing of standard formats as well as serial production with multiple parts per pass. The machine is equipped with InPack-Technology™, which reliably protects guides and optics from dust and dirt. Additionally, the system features an autofocus function for quick and precise adjustment of the focus height. The laser is in well-maintained condition appropriate to its age and is fully operational. The cutting grid and working area show normal, production-related signs of use. The machine has been regularly cleaned and maintained as part of a service contract. Technical Data • Laser source: CO₂ • Laser power: 80 W • Working area: 813 × 508 mm • Focus: Autofocus • Protection system: InPack-Technology™ Scope of Delivery Trotec Speedy 360 CO₂ laser, 80 W Original price: €52,814.00 Honeycomb cutting table Inspection / Handover Inspection and powered demonstration available by appointment. Sale from current location. Shipping by arrangement.