Transportni trak za opilke nakup rabljenega (42)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, skupna dolžina: 3.600 mm, skupna višina: 1.300 mm, širina transportnega traku: 320 mm, izhodna glava: 1.000 mm, višina izmeta: 1.000 mm, transportna dolžina: 1.900 mm, dolžina transportnega traku: 1.900 mm, vgradna višina: 180 mm, Prodam transporter za ostružke Knoll 240 S-1 Dobro ohranjen. Vgradna širina: 320 mm Dolžina transportnega traku do izmeta: 1900 mm Višina transporterja: 180 mm Crsdpfjyxxf Njx Adiof Za dodatna vprašanja smo vam na voljo.

Stanje: pripravljen za uporabo (rabljen), Transporter za ostružke, transporter za odpadni material, Knoll 320 S-1/200, Rabljeni stroj Proizvajalec: Knoll Tip: 320 S-1/200 Skupne dimenzije: Širina: 6200 mm Globina: 1300 mm Višina: 1610 mm Specifikacije traku: 480 x 130 x 60 x 310 mm Crjdpfjxtwqdjx Adisf Hitrost traku: 1,8 m/min Leto izdelave: 2015 Velikost izhodne odprtine: 550 x 530 mm Odprtina zalogovnika: 3120 x 410 mm Razmak lamel: 315 mm

Stanje: rabljeno, Transportni trak za odrezke, dvigalo za odrezke, poševni transportni trak, rabljeni stroj Cedoydbzvspfx Adierf Proizvajalec: Mayfran Tip: POO.96M3806.01 Skupne dimenzije: Širina: 6300 mm Globina: 1050 mm Višina: 1820 mm Dimenzije traku: 6600 × 330 mm Električni podatki: 400 V Velikost letvice: 30 mm Razmak letvic: 245 mm

Leto izdelave: 1987, stanje: dober (rabljeno), With a bubble! Product: RUEZ Type: SFWW2 / 306DAU Year of manufacture: 1987 Metal chain width: 200 mm Guide track spacing: approx. 300 mm Chip discharge length: 700/1300 mm Insertion length: approx. 1000 mm Crodpfogxqfcex Adief Feed height: 260 mm Total length: 3000 mm Transport height - discharge height: 800 mm Belt speed: 26 mm/sec = 1.6 m/min Motor power: 0.25 kW Power supply was 400 V, 50 Hz Housing dimensions (H x W x D): 1900 x 900 x 1300 mm Weight: 300 kg Set with 2 pieces.

Leto izdelave: 1990, stanje: dober (rabljeno), With an air bubble! Product: RUEZ Type: SFWW2 / DAS406 Year of manufacture: 1990 Metal chain width: 330 mm Distance between guide tracks: approx. 300 mm Chip discharge length: 2000/1000 mm Cedpfx Aegxqgzsdisrf Insertion height: 260 mm Total length: 3000 mm Transport height – Discharge height: 1100 mm

Leto izdelave: 1999, stanje: dober (rabljeno), Product: BMF Year of manufacture: 1999 Credpfehq Hz Hex Adief Width of metal chain: 200 mm Guide strip: approx. 300 mm Chip discharge length: 900/1250 mm Feed-in length: approx. 1000 mm Feed-in height: 260 mm Feed-in width: 350 mm Total length: 3600 mm Transport height – discharge height: 800 mm Belt speed: 26 mm/sec = 1.6 m/min Motor power: 0.25 kW Power supply: 400 Volt, 50 Hz Housing dimensions (H x W x D): 8700 x 900 x 1500 mm Weight: 400 kg

Stanje: dober (rabljeno), Water softener, water softener tank - Tank capacity: approx. 200 liters - incl. regeneration salt for water softener - Dimensions: 640/640/H880 mm Csdpfx Aoctla Dediorf - Weight: 172 kg

Stanje: rabljeno, Skupna dolžina 3900 mm Širina traku ca. 300 mm Skupna višina 1550 mm Višina transporta ca. 1130 mm Crodpfx Adezcgdgoief

Stanje: rabljeno, Leto izdelave: 2010, Technical details: Machine weight approx.: 1,400 kg Machine dimensions approx. LxWxH: 6.6 x 0.9 x 3.8 m Total power requirement: 0.75 kW Csdpfxeu Nun Ho Adijrf Manufactured from robust sheet steel construction. This is a scraper belt conveyor. Feed width: F1 = 480 mm; Feed length: 750 mm Discharge: Height = 3,200 mm Infeed (underfeed to the machine): Height = B = 370 mm + superstructure 300 mm = 670 mm, width F = 580 mm, length A = 2,230 mm The chip conveyor is to be positioned stationary.

Stanje: rabljeno, Leto izdelave: 2013, Technical Details: Codpfju Nupdex Adiorf Belt width: 600 mm Voltage: 460 V / 60 Hz Total power requirement: 3.5 kW Approximate machine weight: 2,300 kg Approximate machine dimensions (LxWxH): approx. 9.0 x 1.4 x 3.0 m Hinged Belt Conveyor, Unused With coolant tank including pump (submersible centrifugal pump), delivery rate 250 l/min, sufficient for a delivery height of 25 m Chip inlet length (A) max. 3,000 mm (extension with sheet metal tray with rubber lining 3,000 x 1,100 mm) Total insertion length: 5,000 mm Belt width (H): 600 mm Discharge height (C) above floor: 1,800 mm The chip conveyor has 4x swivel casters below and can be fixed to the floor with anchor bolts.

Stanje: rabljeno, Leto izdelave: 2007, Technical details: Conveying height: C = 900 mm Total power requirement: 2.8 kW Codju Nup Rjpfx Adijrf Machine dimensions approx. (L x W x H): approx. 8.4 x 2.1 x 1.3 m Hinged belt conveyor Very good, lightly used condition. Coolant tank: 1300 x 2050 x 260 mm Discharge length D = 500 mm Total chip inlet length A = approx. 4120 mm with attachment via sheet metal tray with rubber coating, width each 230 mm right/left (including chip inlet extension approx. 1720 mm, covered with profiled sheet) Chip inlet width F = 620 mm Slide-in height B = approx. 380 mm The chip conveyor is equipped with 3x swiveling casters underneath and can also be fixed to the floor using anchor bolts.

Stanje: rabljeno, Technical details: Belt width: F1 = 350 mm Conveying height: C = 1200 mm Cjdpfx Aou Nuqhsdijrf Machine weight approx.: 1050 kg Machine dimensions (LxWxH): approx. G 5.25 x 1.2 x 1.6 m Total power requirement: 2.5 kW Hinged belt conveyor This chip conveyor can be relocated thanks to its 3 swiveling wheels. It is fixed to the floor using 4 leveling bolts. Chip inlet: open (not covered) L: 880 x W: 500 mm; total inlet approx. 2000 mm x 480 mm (including cover) Insertion dimensions: A 2,500 x F 530 x W 350 mm Coolant tank 600 x 1200 x 200 mm with pump and two sensors Very good, barely used condition.

Stanje: rabljeno, Technical details: Belt width: 135 mm Conveying height: 1020 mm Control voltage: 380 V Approx. machine weight: 165 kg Approx. machine dimensions (LxWxH): 3.3 x 0.5 x 1.5 m Scraper belt conveyor made of sheet steel construction Additional technical specifications: - Profile height (B1): 160 mm - Profile width (F): 300 mm - Chip inlet width (F1): 160 mm - Chip inlet length (A): 1700 mm - Floor clearance (I): 20 mm - Discharge length (D): 200 mm Cedpfx Adsu Nuquoierf - Discharge height above floor (C): 1020 mm - Discharge width: 200 mm - Insertion/underfeed length (A): approx. 2000 mm - Insertion height (B): 180 mm Operation via hand switch Rotating scraper brushes at the discharge and laterally on the left/right of the feed bar

Stanje: rabljeno, Leto izdelave: 2013, Technical Details: Belt width: 600 mm Conveying height: C= 1800 mm Voltage: 460 / 60 V / Hz Total power requirement: 3.5 kW Machine weight approx.: 2300 kg Machine dimensions approx. LxWxH: approx. G= 8.45 x F= 1.35 x 3.0 m Crodju Nupqopfx Adief Hinged belt conveyor With coolant tank incl. pump, conveying capacity 250 l/min, suitable for a conveying height of 25 m Very good, lightly used condition. Chip intake length Ax= 3000 mm (extension with sheet metal tray and rubber lining, length 3000 x width 1100 mm) Insertion total length 5000 mm The chip conveyor is fitted with 4x swiveling castors underneath and can be fixed to the floor with anchor bolts.

Leto izdelave: 2002, stanje: rabljeno, Width 395 mm Length 2960 mm Discharge height 130 mm Usable width 385 mm Pole center distance 400 mm Drive motor: three-phase current Credpfjd Srxzex Adiof Linear magnetic conveyor with permanent magnets.

Leto izdelave: 1989, stanje: rabljeno, Overall length approx. 3500 mm Belt width approx. 700 mm Conveying height approx. 1200 mm Discharge height approx. 1200 mm Weight approx. 800 kg Required space approx. 3500 x 1300 x 1650 mm Credpsra Rrtjfx Adisf

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Kühlmitteleinrichtung, Coolant System for Cutting Fluid RUEZ Coolant Tank with Integrated Sludge Remover, Chip Conveyor • Coolant purification system for cutting fluid (KSS) • Includes two-part RUEZ lamella separator • Includes RUEZ safety tray in accordance with WHG with 100% containment capacity • Includes clean tank and RUEZ magnetic roller filter Crjdotwpttopfx Adijf • Year of manufacture: 2022, unused & as new • RAL 7035 light grey • Superstructure for chip cart • No belt filter, sedimentation system • Immediately available • Price negotiable KSS System Description: • Total volume approx. 34,720 l • Fill volume approx. 32,710 l • Usable volume approx. 22,020 l + approx. 6,017 l (clean tank) • L/W/H approx. 7,341 mm / 2,800 mm / 2,000 mm • Tank walls 4 mm / S235JRG2 • Walk-on, divided tank cover • Tank supports approx. 100 mm • OWE 2/C level sensor for leakage protection • Inlet/distributor with strainer basket • 2 supply pumps • Type: NB100-25/4-15kW • 2,000 l/min at 2.1 bar • Piping • DN150/125 • Return piping • DN 100 • PN 16 • RUEZ float switch RB 200 - 3 / 1900 • FTL31-CA4M2AAWBJ level sensor for overfill protection (clean tank) • RUEZ control system • Siemens TIA • PLC: SIMATIC S7-1200, CPU 1215C • Visualization: KTP700 operator panel • Alarm signal light (red-yellow-green)

Stanje: rabljeno, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 ID No.: Order No.: 915979 Year of manufacture: 1992 Metal slat width: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip removal: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Drive motor power (belt): 0.37 kW Cedpshwt H Asfx Adierf Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Space requirement (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Dodatna oprema EROWA - SWIAS, letnik pribl. 2004, približno 60 kosov. Cedpfxsy Egv Ao Adisrf

Stanje: novo, Leto izdelave: 2026, Please fill out the attached form so that we can provide you with a suitable offer. If you have any further questions, please do not hesitate to contact us. Codjy S D Ngjpfx Adierf These conveyors can be manufactured according to specific requirements and dimensions. As with the general structure and belt system, hinged belt conveyors are durable as long as they are regularly maintained. Hinged belt conveyors are used for the transport of a wide variety of long, coarse, curled, and granular chips from transmission steel, tool steel, aluminum alloys, and other materials such as Teflon, Delrin, etc. Hinged belt conveyors are the most commonly used type of chip conveyor. These are systems designed for the transport of chips from manufacturing processes and for the separation of cutting oil/coolant from the chips. Hinged belt conveyors can be manufactured with or without a tank for the return of cutting oil/coolant to the system. In our standard production, we use four types of chain pitches: 31.75, 38.10, 50.80, and 63.50 mm. The chain pitch is selected according to the volume of chips to be conveyed, and the width and length of the conveyor as well as the motor and gearbox are determined in line with the hourly chip throughput requirement. Coolant recycling is also taken into account when selecting the system configuration. The conveyor can be operated either via a control panel or through the CNC control system of a machine tool using a plug connection. The images are for reference only and do not represent the machine to scale.

Stanje: novo, Overall length 7969 mm Belt width 700 mm Conveying height 2500 mm Total power requirement 0.75 kW Please complete the form and return it to us by email for quotation preparation. Credpfx Asymf Tnedisf Hinged Belt Conveyor – Overview & Features General Information - Hinged belt conveyors can be manufactured according to purpose and dimensions. - Construction and belt system are robust and durable, provided regular maintenance is carried out. - This is the most commonly used type of chip conveyor. Applications Transport of: - long, coarse, curly, and granular chips - Materials such as transmission steel, tool steel, aluminium alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Variants - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Selection of chain pitch depends on the chip volume to be conveyed. - Width, length, motor, and gearbox are tailored to the hourly conveying capacity. - Coolant recycling is taken into account in the design. Control - Operation via control panel or CNC control unit of the machine tool. - Operation via plug-and-play connection possible. Note: Images are for reference only.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Iščete dober neuporabljen oziroma kot nov transporter za ostružke ali odrezke? Na voljo imamo 3 enote različnih dimenzij za prodajo. Za več informacij in potrebne dimenzije nas kontaktirajte. Vsaka enota je na voljo po ugodni ceni, le 1.200 € na enoto. Crodpfxey Ifm Es Adisf

Stanje: rabljeno, Chip conveyor, scraper conveyor with coolant tank KNOLL Type 750 K-3/650 Scraper belt conveyor Serial No: 346919 Order No: 200725773 Year of manufacture: 2007 Metal link width approx. 670 mm Distance between carrier bars approx. 550 mm Possible chip discharge length: 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Discharge height 1800 mm Belt speed approx. 20 mm/sec = 1.2 m/min Drive motor power rating 0.55 kW Coolant pump motor rating 3.0 kW Coolant pump flow rate 40 litres/min Power supply 400 Volt, 50 Hz - Scraper chain drive via gear motor Crodpfophvl Tox Adiof - Coolant tank with integrated pump - Coolant pump: Centrifugal pump BRINKMANN, Type TS 24/180 - Steel cover plates with drop handles for lifting, tread plate walkable Space requirement (L x W x H): 6100 x 1150 x 2320 mm Net weight approx. 2000 kg Good condition The conveyor is suitable for transporting chips from a milling machine, lathe, or machining center.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.595 mm, skupna višina: 2.031 mm, skupna širina: 680 mm, izhodna glava: 1.550 mm, višina izmeta: 1.400 mm, vrsta vhodnega toka: trifazni, transportna dolžina: 2.750 mm, vhodna napetost: 380 V, transportna višina: 450 mm, dolžina transportnega traku: 5.595 mm, vhodni tok: 1 A, vhodna frekvenca: 50 Hz, Tehnologija transportnih trakov za suhi obrat Tip: P-40 Oblika: Z-oblikovana Verižni razmak: 40 mm Standardna širina transportnega traku Standardna širina: 680 mm Širina posode: 680 mm Dolžina nalaganja: 2.750 mm Višina nalaganja: 240 mm Območje nalaganja: 2.750 mm Kot naklona: 30° Transportna višina: 1.550 mm Višina izmetanja nad tlemi: 1.400 mm Dolžina izmetanja: 450,0 mm Skupna dolžina transporterja: 6.157 mm Transportna ušesa: Da Naklonski del pokrit: Da Vstopni lijak: Da Pokrovi v območju nalaganja: gladka jeklena pločevina Izmetni lijak: Da Višina izmetnega lijaka: 150 mm Zaščita pred vmesnim posegom po EN618: Da, transporter je v skladu s CE Cjdpfx Ajwvgpkedijrf Kolesa: Da Nastavljive noge: Da Pogon: zobniški motor Položaj pogona: desno ob strani Znamka: SEW Poraba energije: 0,25 kW Zaščita pred preobremenitvijo preko končnega stikala (obroč stikala)

Stanje: novo, Total length as per specification mm Belt width as per specification mm Conveying height as per specification mm Our magnetic conveyor systems from GERD WOLFF offer a versatile solution for efficient and gentle transportation of materials, including dust, shredded iron chips, and metal particles. - Contact-free transport – no direct contact between magnetic carriers and product or chips, preventing damage to pallet and conveyed goods - Higher manufacturing costs due to permanently installed, high-performance neodymium magnets on the pallets - Flexible control options: integrated, user-friendly control unit or connection to CNC machine via plug-in interface - Highly adaptable – designed for specific requirements such as conveying angle, dimensions, and chip load capacity - Especially suitable for sensitive or easily damaged materials Credjymf Huopfx Adijf - Robust construction for long service life in continuous industrial operation - Low maintenance – rare and uncomplicated servicing - Ideal for industries requiring clean, gentle, and reliable material transport