Transporter za drobtine

DGS SSF650P50

Stanje: rabljeno, Leto izdelave: 2013, Technical Details: Belt width: 600 mm Conveying height: C= 1800 mm Voltage: 460 / 60 V / Hz Fjdpfeu Nupqox Anfepg Total power requirement: 3.5 kW Machine weight approx.: 2300 kg Machine dimensions approx. LxWxH: approx. G= 8.45 x F= 1.35 x 3.0 m Hinged belt conveyor With coolant tank incl. pump, conveying capacity 250 l/min, suitable for a conveying height of 25 m Very good, lightly used condition. Chip intake length Ax= 3000 mm (extension with sheet metal tray and rubber lining, length 3000 x width 1100 mm) Insertion total length 5000 mm The chip conveyor is fitted with 4x swiveling castors underneath and can be fixed to the floor with anchor bolts.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Misinvestment by a corporation. Machine is brand new and unused (already delivered). The machine is available immediately with no lead time. An absolutely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: Fully closed scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optionally 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: Direct drive Minimum index: 0.001° Maximum rotation speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: Central spindle cooling Internal coolant supply: optional CTS 7 MPa Tool magazine: Chain-type magazine, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [with >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment/options: Workpiece probe Tool measurement Laser tool control (optional) Fpjdpfjxizdaex Anfog High-pressure coolant supply 7 MPa (optional) Chip conveyor Fully enclosed with roof Dimensions: n/a Weight: n/a Connection data: n/a

Stanje: rabljeno, Leto izdelave: 2008, x-axis travel: 410 mm y-axis travel: 570 mm z-axis travel: 140 mm Control: Mazatrol Matrix Maximum machining diameter: 545 mm Maximum machining length: 519 mm Main spindle speed: 35 - 6,000 rpm Tool holder: Capto C6 Rapid traverse (X/Y/Z axes): 30/26/33 m/min Performance / Capacity: Maximum swing: 545 mm Maximum machining diameter: 545 mm Maximum outside diameter for bar work: 51 mm Maximum machining length: 519 mm Maximum workpiece weight: - Chuck work: 150 kg - Bar work: 200 kg Main Spindle: Spindle speed: 35-6,000 rpm Spindle bore diameter: 61 mm Maximum torque: 161 Nm Tailstock: Fpedpfx Aeyt R Idjnfsg Rapid traverse: 8 m/min Travel range (engaged/retracted): 434/281 mm Milling Head: Type: Single spindle with ATC Tool shank type: Capto C6 Tool dimensions: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 mm diameter x 200 mm length Milling spindle speed: 15-12,000 rpm Equipment/Accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Stanje: rabljeno, Leto izdelave: 2003, Drehdurchmesser 190 mm Drehlänge 620 mm Steuerung Fanuc Series 18i-TB Gesamtleistungsbedarf 15 kW Maschinengewicht ca. 13,5 t Raumbedarf ca. 5350X3350x2395 m Fsdpoxiy Auefx Anfspg CNC Dreh- und Fräszentrum NAKAMURA TOME Super NTJ Baujahr 2003 Steuerung Fanuc Series 18i-TB - Hauptspindel muss überholt werden. - Oberer Revolver ist mit einer G42 Turbo- Luftangetriebenen Spindel 60000 U/min und Steuergerät GTR 3 nachgerüstet. Anzahl der Achsen: 9 Anzahl der Revolver: 2 Max. Drehdurchmesser: 190 mm Max. Drehlänge: 620 mm Stangendurchlass: bis zu 65 mm Umlaufdurchmesser über Bett: 190 mm Anzahl: 2 (Haupt- und Gegenspindel) Spindelnase: A2-6 Antriebsleistung: 15 kW Max. Drehzahl: 60000 U/min X-Achse: 345 mm Y-Achse: +/- 45 mm Z-Achse: 1240 mm B-Achse: +/- 91° oben voll Servogesteuert 0,001° Stangendurchlass: D 65 mm - 12-fach Revolver für angetriebene Werkzeuge - 24-fach Revolver für Drehwerkzeuge (Doppelhaltertechnik) - mit viel Zubehören - 2 x HB-Futter Hainbuch

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 45 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 1700/1400/1240 mm Fpsdpfx Aow D Hwwonfsg - Rapid traverse speed (X/Y/Z): 48 m/min - Feed speed (X/Y/Z): 20 m/min SWIVEL AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 - Tool change time: 6 s PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1250x1250 mm - Number of pallets: 2 - Max. pallet load: 3,000 kg - Distance from table center to spindle nose: 70–1470 mm - Max. workpiece diameter: 1,970 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 32,500 kg MACHINE HOURS - Power-on hours: 34,422 h ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Synchronized tapping - 3-color status light - Coolant tank * with high-pressure pump: 70 bar * internal coolant supply (through-spindle coolant) * paper filter * coolant chiller * cabin washing system - Chip conveyor - Tool measurement probe - Workpiece measuring probe: Renishaw RMP60 - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Fpjdpfx Aeyyuvtonfeg Tool Carrier 3

Stanje: zelo dobro (rabljeno), HERMLE C 42 U je 2 x 5-osni center z nakladalnim robotom, zasnovan za visoko natančnost in zanesljivost. Miza 400×400 mm, 450 kg, hodi X800 Y800 Z550 mm, os A ±130°. Vreteno HSK‑A63 0–18.000 vrt./min, 42 kW, 148 Nm; hitri pomiki 45/45/40 m/min. Magazin 42+160, 54 palet, robot KUKA, IKZ 80 bar, Renishaw/BLUM. Uporaba: avtomobilska industrija, letalstvo, urarstvo, medicinska tehnologija. Fedpoyxn Dnjfx Anfopg

Stanje: rabljeno, Leto izdelave: 2014, INDEX C200 CNC stružnica 3 revolverske glave 2 vretena Fanuc krmilnik: 31i-Model B Motorna aksialna stikala: 6 kos Motorna radialna stikala: 13 kos Nosilci orodij: 11 kos Nosilci vrtalnih palic: 21 kos Zatič: 1 kos Vložki za polnjenje + tulke: Ø51/Ø46/Ø41 Nove MBL vložke za polnjenje: 2 kompleta 2 optični merili obnovljeni pri HEIDENHAIN 1 Balluff škatla z robotskimi rokami z različnimi senzorji, bližinskimi stikali in kabli Motorizirani jermeni: 6 kos Set antivibracijskih vložkov za MBL polnilnike Čas obratovanja: Čas vklopa: 37.946 Hidravlične ure: 37.500 Proizvodni čas: 26.500 Z MBL podajalnikom palic Fedpfxjxxm Hfo Anfopg

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 350 mm, 3-osni digitalni prikazovalnik Horizontalno in vertikalno rezkalno vreteno Pinola Fpodpowyit Hefx Anfsg Tehnični podatki: Dolgobna posuv X / vzdolžno pomikanje X: 450 mm Prečna posuv Y / prečno pomikanje Y: 300 mm Navpična posuv Z / navpično pomikanje Z: 350 mm Velikost mize: 800x400 mm Vpenjalni konus vretena: SK40 Območje obratov: 50-2500 min⁻¹ Območje pomika: 8-400 mm/min Pogonska moč: 3,2 kW Teža stroja: 1500 kg Tehnični podatki, pribor in opis stroja niso zavezujoči.

Stanje: rabljeno, Technical Details: Travel path - Y: Slide on beam: 200 mm Spindle mount ISO: SK 40 Spindle head tiltable left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table - spindle bottom end: min./max.: 50 / 400 mm Table clamping surface (mounting area): 760 x 200 mm Table clamping surface (clamping area): 630 x 200 mm Max. table load: 100 kg X travel: table longitudinal: 320 mm Z travel: table vertical: 350 mm Table tiltable +/-: left/right 30° each Distance table - spindle bottom end: min./max.: 50 / 400 mm Feed:: Table: stepless 14 - 71 mm/min Total power consumption: 4.0 kW Approx. weight: 1,200 kg Machine dimensions (LxWxH): 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital position display for X and Y. Swiveling working spindle. The feed is driven via a variator gearbox. The table is tiltable. Spindle speeds have 3 mechanical gear steps and 2 electrical steps. Coolant system. The milling beam is extendable by approx. 350 mm. Fodpsu Ndb Asfx Anfepg The machine vise is a recommendation and is not included in the scope of delivery. It can be purchased optionally.