Os Meritev Sistem Z Dvižno Fazi 4 nakup rabljenega (90.982)

Stanje: rabljeno, Leto izdelave: 2025, Filtration system, immediately available! NEW in original packaging! 1.1. STfp-rFan DER4 450/550/18.5-2 | incl. backdraft damper Extraction fan, "DER4" series for clean-air side installation, single-sided suction, direct drive. Key design features: - Scroll housing made of galvanized sheet steel, pre-configured for horizontal installation in MultiStar series filters - IEC standard motor - High-performance impeller with backward-curved blades, designed for clean-air extraction - Suction nozzle with spark protection strip - Impeller made of welded steel, statically and dynamically balanced Note: For explosion protection reasons, the fan is not suitable for conveying explosive dust/air mixtures! Technical data and performance: - Max. permissible airflow: 15,000 m³/h - Total pressure increase: 3,000 Pa - Inlet nozzle: 450 mm diameter - Outlet nozzle: 450 mm x 355 mm - Drive motor: 18.5 kW, 3000 rpm at 50 Hz | 3600 rpm at 60 Hz - Voltage / Frequency: 400 V, 50 Hz - Motor efficiency class: IE3, premium efficiency - Weight, approx.: 330 kg - Direction of rotation: RD 0 1.1.1. ST cold conductor 18.5 kW 1.2. ST MultiStar VR 6.6-195.25317A MultiStar filter in modular design, with vibration cleaning for installation outside hazardous explosive areas. Design features: - Galvanized, self-supporting sheet steel construction - Pressure surge resistance 200 mbar (certified by DEKRA—test report 342863200a-23ExA-Sip) - Maximum housing underpressure resistance: 5,500 Pa (avoid pulsating stress) - EC type-approved burst disks - Filter section with weather protection cladding, inspection door(s) and required number of exhaust outlets (depending on air volume) - Fire resistance EW 90ef, MPA-certified Bcodpfex U Egrjx Ag Tjw - Clean air outlet as per project drawing - BG-tested needle felt filter media, suitable for wood and paper dust and many other dust types - Filter bags externally loaded, with re-usable internal support elements - Filter cleaning during system downtimes - Expansion chamber for pre-separation The permissible fill height of the expansion chamber depends heavily on the material characteristics (bulk density, particle size, tendency to bridge, etc.) and is approx. 400...700 mm. - Inspection door with window and limit switch - Connection shaft for rotary valve or similar Technical data and dimensions: - Filter area: 195 m² - Filter bags: 144 units - Filter bag length: 2,530 mm - Bag diameter: 170 mm - Shaker unit: 0.18 kW, 400 V, 50 Hz – 1 unit - Agitator drive: 1.50 kW, 400 V, 50 Hz - Base area, L x W: 2,880 mm x 2,880 mm - Space requirement, L x W: Refer to plant drawing - Height: 9,110 mm Also included in delivery: - Dry riser fire extinguishing system, consisting of: o C-hose connection with blind coupling* o Riser pipe from bottom edge of filter o Distributor pipe system with spray nozzles o Instruction sign Note: According to DIN EN 12779:2016 Sec. 5.4.2.3, the water connection must be located 0.4 m to 0.8 m above the floor and must be safe and easily accessible for connection of a fire hose in case of fire. The BGHM also recommends installation of a dirt trap in the riser pipe. The necessary components, materials, and labor for this are not included in the base price of the dry riser and must be provided separately by the customer or as a custom installation with a special height of 3,000 mm. The subframe is not included in the scope of delivery and is specified separately. 1.2.3. ST Additional S

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Ejector / Inserter / Conveyor System Features: Condition: Fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packaged Manufacturer: Budde Year of manufacture: 2011 Condition: Good (used) Colour: Blue - galvanized Total length: approx. 2500 mm Short side (Ejector): approx. 780 mm Total width incl. motor: approx. 1300 mm Bcjdpfxjyfgtms Ag Tew Belts: 18 units - approx. 40 mm wide Conveying width: approx. 1000 mm Stock quantity: 2 pieces Includes SEW motor (1.1 kW) Price per unit Internal article number: 2026012705 The conveyor system was operational up to dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to provide you with a custom quotation or advise you on design or installation queries. Just let us know your needs and site conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in various sectors, such as logistics, pharmaceutical industry, skilled trades, or the electronics sector. Together, we will develop strategies to optimize your processes and material flow in a cost-effective and sustainable way. We can also supply fully automated sorting systems or supplementary components such as order picking racks or containers.

Stanje: rabljeno, AZO vakuumski sistem z dozirnim polžem Tip polža: DFS 155x550 NE320 A22R Tip separatorja: PKS 320-50 M A23R Letnik izdelave: 2004 Opremljen s sistemom za hitro čiščenje na dozirnem polžu Vključuje različne pnevmatske ventile in dodatke za vakuumski transport Oglejte si naše druge oglase VMA Wekerom Bjdsygh Emjpfx Ag Tecw

Stanje: dober (rabljeno), Keyence XG-7501P Multi-Camera Image Processing System Controller XG7501P Manufacturer: Keyence Manufacturer Part Number: XG-7501P Type: Multi-Camera Image Processing System, Controller Side cover included Country of Manufacture: Japan Item condition: This item comes from the closure of operations of one of Germany’s largest automotive parts suppliers and was stored in paternoster systems. Therefore, some original packaging is missing and certain items may show signs of storage. Bedjib Dncspfx Ag Tjcw

Stanje: novo, Leto izdelave: 2025, Compact design Maximum reliability Bcodpfx Aohkzu Aog Tjw High suction capacity Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Longer filter service life Easy emptying Plug-and-play delivery with rotary valve lock Models with rotary valve lock: AL-KO POWER UNIT® 300 ZRS Suction connection: 300 mm Motor rated power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum air flow: 4,900 m³/h 6,000 m³/h Rated air flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: from stock 54634 Bitburg - immediately available - Subject to prior sale

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wave soldering system with comprehensive equipment! A spare parts package valued at approximately €20,000 is included in the sale and delivery! The system consists of the following components: - Seho Wave Soldering System MWS 2340-F - Fluxer SelectFlux - Streamline Transport System incl. lifts TECHNICAL DETAILS Preheater PULSAR: 2x convection and 5x Pulsar preheating zones (3,300 mm length) Wetting length of soldering unit: 40 mm + 30 mm Return transport level: raised to 405 mm Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas purification system Bjdpjx Nhhhsfx Ag Tocw - Finger cleaning unit - Foldable convection top heating - Fan speed monitoring for convection preheating - Standard soldering aggregate - Wide solder nozzle unit, 7 hole rows - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. time control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen-saving circuit - Transponder system for automatic switching of soldering programs - Selective fluxing module (external module) - Flow rate sensor for flux per spray head - Flux storage tank with connections - Replacement filter for external spray fluxer module – upper system area & lower system area - Spare PC

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (ROBOT head) Gantry design construction Control: ICOS CNC – Software: IMAWOP / (OPTION IMAwinCAD) Safety cabin for machining head Clamping table with 8 consoles LED positioning system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disk-type tool changers – Magazine/tool stations (8 each) + TC8 (18 stations) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity in m³/h): 140 Separate electrical and control cabinet. Total power connected (kW): 23 WORKING UNITS (TOP): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving unit, 125 mm diameter, swivels 90° in X-Y direction Bsdpfxjfin Sao Ag Tecw 1 vertical main spindle (milling unit), robot head (HSK F63) Vertical main spindle power (kW): 9 Independent Z-axis travel: 650 mm A-axis arranged/mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°

Stanje: zelo dobro (rabljeno), Panel dividing saw – horizontal – with rear lifting table Control: MCS Evolution Software included Lifting table (mm): 4300 x 2200 No. of rear pushers: 2 (1 with grippers) No. of grippers: 8 Maximum cutting width (mm): 4200 Useful stroke of pusher (mm): 4200 Maximum saw blade projection (mm): 135 Maximum gripper opening (mm): 125 Scoring saw (max. blade diameter): 20 mm Main saw (max. blade diameter/output): 460 mm / 21 kW Bodpfx Agoq Rffie Tscw Adjustable saw carriage feed (m/min): 6 – 150 No. 1 front air cushion table with 90° rotation device (mm): 2100 x 4100 Total connected load (kW): approx. 36

Stanje: zelo dobro (rabljeno), Panel dividing saw - horizontal - with rear lifting table Control: MCS Evolution Software Powered roller conveyors (approx. mm 4500 x 2200) Lifting table (mm) 4300 x 2200 Panel rotating device (for boards) through 90° No. 2 rear pushers (1 with clamping grippers) Program-controlled pusher division No. 10 grippers Max. cutting width (mm): 4300 Bodpoq Rfahefx Ag Tecw Useful stroke of the loader (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 133 Scoring saw (max. saw diameter) mm: 20 Main saw (max. saw diameter / power) mm: 460 - 27 kW Variable saw carriage feed (m/min): 0 - 150 No. 4 front air cushion tables Total connected load (kW): 36 (approx.)

Leto izdelave: 2023, Stanje: novo, številka stroja/vozila: 011/2020, STK-10000i je nizkocenovni vakuumski sistem proizvajalca SAF TEKNIK, ki zagotavlja zelo učinkovito filtracijo z veliko močjo in pretokom zraka! Bedpfxsf D S Tro Ag Tocw Opremljen je z več filtrskimi stolpci in vibracijskim čiščenjem filtrov. Sestavni del je tudi separator za večje delce, ki preprečuje poškodbe celotnega sistema. TEHNIČNE SPECIFIKACIJE: - Moč motorja: 11 kW - NOVO: Frekvenčni pretvornik za glavni motor - Zmogljivost izpuha: 10.000 m3/h - Hitrost zraka: 41 m/s - Filtrska površina: 30 m2 - Prostornina zbirne posode: 810 litrov - Premer izpušnega priključka: 355 mm - Teža: 740 kg - Dimenzije: 3170 mm x 1200 mm x 2330 mm NA VOLJO TUDI DRUGE IZVEDBE: - STK-6500 (6.500 m3/h) - STK-8000 (8.000 m3/h)

Stanje: rabljeno, Gear motor, electric motor, three-phase motor, geared electric motor - Speed: 11/21 rpm - Power: 0.2/0.28 kW - Design: B3 foot mounting, angle type - Shaft diameter: 25 mm - Protection class: IP 44 - Brake - Dimensions: 450/200/H220 mm - Weight: 24 kg Bcjdpfx Aochq Iheg Tjw

Stanje: novo, Leto izdelave: 2026, The MILL 530 CNC machining centers are industrial machines that deliver both reliability and precision. Thanks to their robust construction and proven components, these machines are perfect for demanding industrial applications. A heavy-duty frame ensures stability and precision during machining, while the fully enclosed working area keeps the workspace perfectly clean and safe. The table features a hardened surface that is gentle on workpieces, and an efficient cooling system ensures optimal cutting conditions. Choose the MILL 530 to guarantee the highest quality and efficiency for your production. MILL 530 Machining Center – Precision and Performance in CNC Machining The MILL 530 Machining Center is an advanced vertical CNC machining center designed for precise metalworking in manufacturing plants. Equipped with modern technologies and a robust structure, it provides reliability and high productivity across various industrial applications. Technical Specifications Travel ranges X Axis: 450 mm Y Axis: 340 mm Z Axis: 400 mm Distance from spindle nose to table: 10–470 mm Distance from spindle center to column guide: 350 mm Feed Rapid feed, X axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid feed, Y axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid feed, Z axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Work Table Table surface: 900 x 400 mm T-slot: 4–14 mm Spindle Spindle speed: 100–8000 rpm (option: 10000 rpm) Spindle taper: BT40 Coolant pump: 480W; 2.5–3.3 m³/h Main spindle motor power: 3.7 kW Tool Magazine Max tool diameter: 100 mm Max tool length: 300 mm Max tool weight: 7 kg Bcedpfjyb Nc Nex Ag Tew Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (LxWxH): 2100 x 2250 x 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control 8000 rpm spindle 16-position tool magazine 3-color signal beacon Work area lighting Closed-loop cooling system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control system dedicated to entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: - Intuitive operation: The graphical interface and Teach-In function make programming easy, minimizing operator training time. - High reliability: Durable design resistant to dust and moisture, ensuring stable operation in challenging workshop environments. - Compatibility: Tailored for machines with standard requirements and easy integration of SIEMENS servo drives. - Cost optimization: Low energy consumption and minimal maintenance requirements, ideal for users new to CNC.

Stanje: dober (rabljeno), V-belt pulley, pulley with taper bush, taper tension bush, taper lock tension bush Bedpfx Ajpid A Usg Tecw - Manufacturer: Desch, V-belt pulley 4-groove SPB 150x4 2517 - V-belt width: 17 mm - Bore: Ø 45 mm taper bush 2517-45 (interchangeable) - Quantity: 1 pulley available - Dimensions: Ø 155 x 80 mm - Weight: 5.9 kg

Stanje: rabljeno, V-belt pulley, pulley with taper bush, taper tension bush, taperlock tension bush Bsdpfspid Dysx Ag Tecw -Manufacturer: Optibelt, V-belt pulley, 4-groove, 250 4SPB 3020 -V-belt width: 17 mm -Bore: Ø 45 mm taper bush 3020-45 (interchangeable) -Quantity: 1 pulley available -Dimensions: Ø 255 x 85 mm -Weight: 14.3 kg

Stanje: rabljeno, V-belt pulley, pulley with taper bush, taper locking bush, taperlock bush -Manufacturer: Optibelt, V-belt pulley, 4 grooves SPB 236x4 3020 -V-belt width: 17 mm -Bore: Ø 42 mm SKF taper bush 3020-42 (interchangeable) -Quantity: 1x pulley available -Dimensions: Ø 240 x 80 mm Bsdpfxepid D Dj Ag Tecw -Weight: 13.9 kg

Stanje: rabljeno, V-belt pulley, Pulley Bjdpfxem At Hlj Ag Tscw - V-belt pulley: 4-groove pulley - V-belt width: 17 mm - Bore: Ø65 mm - Dimensions: Ø290 x 82 mm - Weight: 15 kg

Stanje: rabljeno, V-belt pulley, belt pulley - V-belt pulley: 4-groove pulley - V-belt width: 17 mm Bodjm At H Tspfx Ag Tocw - Bore: Ø65 x 65 mm - Dimensions: Ø257 x 80 mm - Weight: 10.5 kg

Stanje: rabljeno, V-belt pulley, pulley with taper bush hub, taper bush, taperlock bush - V-belt pulley: 4-groove pulley 250/4 - V-belt width: 17 mm - Taper bush hub: Ø 65 mm (interchangeable) - Quantity: 2 pulleys available Bcsdpjlu N E Eofx Ag Tsw - Price: per piece - Dimensions: Ø 260 x 82 mm - Weight: 7.6 kg/pc.

Leto izdelave: 1999, Stanje: rabljeno, Scrubber-dryer, floor cleaning machine, sweeper, geared drive - Manufacturer: Gansow, drive axle with gear motor from scrubber-dryer 70 BF 85 - Motor: Gansow Type MRP4DS 400 W 24 V 130 rpm - Dimensions: 610/250/H200 mm Bsdpfok D Nutex Ag Tocw - Weight: 20 kg

Stanje: rabljeno, V-belt pulley, pulley with taper bush, taper tension bush, taperlock tension bush Bsdpfjpid Edox Ag Tscw - V-belt pulley: four-groove pulley 4SPB 3020 55 - V-belt width: 17 mm - Bore: Ø 55 mm for taper bush 3020 (interchangeable) - Quantity: 1x pulley available - Dimensions: Ø 255 x 80 mm - Weight: 14 kg

Stanje: rabljeno, adjustable geared motor, variable speed geared motor, electric motor - Adjustment gearbox manufacturer: Lenze, type: 275-HD-283-112-4 - Gearbox manufacturer: Lenze, type: 12 435 28 10 HU - Motor manufacturer: Bauknecht, type: 112M R 4/4-75 - Motor power: 4 kW - Speed range: 7.4–42.3 rpm - Motor: adjustable - Quantity: 1 unit available Bcodpsd D Nfkofx Ag Tjw - Price: per unit - Hollow shaft: Ø 70 mm - Dimensions: 620 / 600 / H560 mm - Weight: 152 kg

Stanje: dober (rabljeno), Roller conveyor, conveyor track, roller conveyor belt, roller track Bodpfx Agocm Aiys Tjcw -with: pneumatic lifting device -Lift: 35 mm -not driven -Roller width: 585 mm -Conveying length: 2000 mm -Rollers: Ø 80 mm -Roller pitch: 220 mm -Overall height of conveyor: 205 mm -Transport dimensions: 2070/930/H205 mm -Weight: 264 kg

Stanje: rabljeno, V-belt pulley, pulley with taper bush, taper tension bush, taperlock bush - V-belt pulley: 4-groove pulley - V-belt width: 17 mm - Bore: Taper bush Ø 48 x 50 mm (interchangeable) Bcsdpfxsm T Ah Ts Ag Tjw - Dimensions: Ø 260 x 80 mm - Weight: 26.1 kg

Stanje: rabljeno, Scrubber-dryer, floor cleaning machine, sweeper, gearbox - Manufacturer: Gansow, drive axle with geared motor from scrubber-dryer 70 BF 70 - Motor: Gansow type 11500, 1000 W, 24 V - Gearbox: Flender ZF 12 - Dimensions: 660/260/H150 mm Bcjdpfx Agsl Ab Ene Tow - Weight: 43 kg

Leto izdelave: 1996, Stanje: rabljeno, Scrubber-dryer, floor cleaning machine, sweeper, gearbox - Manufacturer: Gansow, drive axle with geared motor from scrubber-dryer model 70 BF 70 - Motor: Gansow Type 13509, 367 W, 24 V - Dimensions: 660/360/H250 mm Bcodpfx Agsk D Nulo Tew - Weight: 51 kg